Frequently asked questions
##########################

"ImportError: dynamic module does not define init function"
===========================================================

1. Make sure that the name specified in PYBIND11_MODULE is identical to the
filename of the extension library (without prefixes such as .so)

2. If the above did not fix the issue, you are likely using an incompatible
version of Python (for instance, the extension library was compiled against
Python 2, while the interpreter is running on top of some version of Python
3, or vice versa).

"Symbol not found: ``__Py_ZeroStruct`` / ``_PyInstanceMethod_Type``"
========================================================================

See the first answer.

"SystemError: dynamic module not initialized properly"
======================================================

See the first answer.

The Python interpreter immediately crashes when importing my module
===================================================================

See the first answer.

CMake doesn't detect the right Python version
=============================================

The CMake-based build system will try to automatically detect the installed
version of Python and link against that. When this fails, or when there are
multiple versions of Python and it finds the wrong one, delete
``CMakeCache.txt`` and then invoke CMake as follows:

.. code-block:: bash

    cmake -DPYTHON_EXECUTABLE:FILEPATH=<path-to-python-executable> .

.. _faq_reference_arguments:

Limitations involving reference arguments
=========================================

In C++, it's fairly common to pass arguments using mutable references or
mutable pointers, which allows both read and write access to the value
supplied by the caller. This is sometimes done for efficiency reasons, or to
realize functions that have multiple return values. Here are two very basic
examples:

.. code-block:: cpp

    void increment(int &i) { i++; }
    void increment_ptr(int *i) { (*i)++; }

In Python, all arguments are passed by reference, so there is no general
issue in binding such code from Python.

However, certain basic Python types (like ``str``, ``int``, ``bool``,
``float``, etc.) are **immutable**. This means that the following attempt
to port the function to Python doesn't have the same effect on the value
provided by the caller -- in fact, it does nothing at all.

.. code-block:: python

    def increment(i):
        i += 1 # nope..

pybind11 is also affected by such language-level conventions, which means that
binding ``increment`` or ``increment_ptr`` will also create Python functions
that don't modify their arguments.

Although inconvenient, one workaround is to encapsulate the immutable types in
a custom type that does allow modifications.

An other alternative involves binding a small wrapper lambda function that
returns a tuple with all output arguments (see the remainder of the
documentation for examples on binding lambda functions). An example:

.. code-block:: cpp

    int foo(int &i) { i++; return 123; }

and the binding code

.. code-block:: cpp

   m.def("foo", [](int i) { int rv = foo(i); return std::make_tuple(rv, i); });


How can I reduce the build time?
================================

It's good practice to split binding code over multiple files, as in the
following example:

:file:`example.cpp`:

.. code-block:: cpp

    void init_ex1(py::module &);
    void init_ex2(py::module &);
    /* ... */

    PYBIND11_MODULE(example, m) {
        init_ex1(m);
        init_ex2(m);
        /* ... */
    }

:file:`ex1.cpp`:

.. code-block:: cpp

    void init_ex1(py::module &m) {
        m.def("add", [](int a, int b) { return a + b; });
    }

:file:`ex2.cpp`:

.. code-block:: cpp

    void init_ex2(py::module &m) {
        m.def("sub", [](int a, int b) { return a - b; });
    }

:command:`python`:

.. code-block:: pycon

    >>> import example
    >>> example.add(1, 2)
    3
    >>> example.sub(1, 1)
    0

As shown above, the various ``init_ex`` functions should be contained in
separate files that can be compiled independently from one another, and then
linked together into the same final shared object.  Following this approach
will:

1. reduce memory requirements per compilation unit.

2. enable parallel builds (if desired).

3. allow for faster incremental builds. For instance, when a single class
   definition is changed, only a subset of the binding code will generally need
   to be recompiled.

"recursive template instantiation exceeded maximum depth of 256"
================================================================

If you receive an error about excessive recursive template evaluation, try
specifying a larger value, e.g. ``-ftemplate-depth=1024`` on GCC/Clang. The
culprit is generally the generation of function signatures at compile time
using C++14 template metaprogramming.

.. _`faq:hidden_visibility`:

"‘SomeClass’ declared with greater visibility than the type of its field ‘SomeClass::member’ [-Wattributes]"
============================================================================================================

This error typically indicates that you are compiling without the required
``-fvisibility`` flag.  pybind11 code internally forces hidden visibility on
all internal code, but if non-hidden (and thus *exported*) code attempts to
include a pybind type (for example, ``py::object`` or ``py::list``) you can run
into this warning.

To avoid it, make sure you are specifying ``-fvisibility=hidden`` when
compiling pybind code.

As to why ``-fvisibility=hidden`` is necessary, because pybind modules could
have been compiled under different versions of pybind itself, it is also
important that the symbols defined in one module do not clash with the
potentially-incompatible symbols defined in another.  While Python extension
modules are usually loaded with localized symbols (under POSIX systems
typically using ``dlopen`` with the ``RTLD_LOCAL`` flag), this Python default
can be changed, but even if it isn't it is not always enough to guarantee
complete independence of the symbols involved when not using
``-fvisibility=hidden``.

Additionally, ``-fvisiblity=hidden`` can deliver considerably binary size
savings.  (See the following section for more details).


.. _`faq:symhidden`:

How can I create smaller binaries?
==================================

To do its job, pybind11 extensively relies on a programming technique known as
*template metaprogramming*, which is a way of performing computation at compile
time using type information. Template metaprogamming usually instantiates code
involving significant numbers of deeply nested types that are either completely
removed or reduced to just a few instructions during the compiler's optimization
phase. However, due to the nested nature of these types, the resulting symbol
names in the compiled extension library can be extremely long. For instance,
the included test suite contains the following symbol:

.. only:: html

    .. code-block:: none

        _​_​Z​N​8​p​y​b​i​n​d​1​1​1​2​c​p​p​_​f​u​n​c​t​i​o​n​C​1​I​v​8​E​x​a​m​p​l​e​2​J​R​N​S​t​3​_​_​1​6​v​e​c​t​o​r​I​N​S​3​_​1​2​b​a​s​i​c​_​s​t​r​i​n​g​I​w​N​S​3​_​1​1​c​h​a​r​_​t​r​a​i​t​s​I​w​E​E​N​S​3​_​9​a​l​l​o​c​a​t​o​r​I​w​E​E​E​E​N​S​8​_​I​S​A​_​E​E​E​E​E​J​N​S​_​4​n​a​m​e​E​N​S​_​7​s​i​b​l​i​n​g​E​N​S​_​9​i​s​_​m​e​t​h​o​d​E​A​2​8​_​c​E​E​E​M​T​0​_​F​T​_​D​p​T​1​_​E​D​p​R​K​T​2​_

.. only:: not html

    .. code-block:: cpp

        __ZN8pybind1112cpp_functionC1Iv8Example2JRNSt3__16vectorINS3_12basic_stringIwNS3_11char_traitsIwEENS3_9allocatorIwEEEENS8_ISA_EEEEEJNS_4nameENS_7siblingENS_9is_methodEA28_cEEEMT0_FT_DpT1_EDpRKT2_

which is the mangled form of the following function type:

.. code-block:: cpp

    pybind11::cpp_function::cpp_function<void, Example2, std::__1::vector<std::__1::basic_string<wchar_t, std::__1::char_traits<wchar_t>, std::__1::allocator<wchar_t> >, std::__1::allocator<std::__1::basic_string<wchar_t, std::__1::char_traits<wchar_t>, std::__1::allocator<wchar_t> > > >&, pybind11::name, pybind11::sibling, pybind11::is_method, char [28]>(void (Example2::*)(std::__1::vector<std::__1::basic_string<wchar_t, std::__1::char_traits<wchar_t>, std::__1::allocator<wchar_t> >, std::__1::allocator<std::__1::basic_string<wchar_t, std::__1::char_traits<wchar_t>, std::__1::allocator<wchar_t> > > >&), pybind11::name const&, pybind11::sibling const&, pybind11::is_method const&, char const (&) [28])

The memory needed to store just the mangled name of this function (196 bytes)
is larger than the actual piece of code (111 bytes) it represents! On the other
hand, it's silly to even give this function a name -- after all, it's just a
tiny cog in a bigger piece of machinery that is not exposed to the outside
world. So we'll generally only want to export symbols for those functions which
are actually called from the outside.

This can be achieved by specifying the parameter ``-fvisibility=hidden`` to GCC
and Clang, which sets the default symbol visibility to *hidden*, which has a
tremendous impact on the final binary size of the resulting extension library.
(On Visual Studio, symbols are already hidden by default, so nothing needs to
be done there.)

In addition to decreasing binary size, ``-fvisibility=hidden`` also avoids
potential serious issues when loading multiple modules and is required for
proper pybind operation.  See the previous FAQ entry for more details.

Working with ancient Visual Studio 2008 builds on Windows
=========================================================

The official Windows distributions of Python are compiled using truly
ancient versions of Visual Studio that lack good C++11 support. Some users
implicitly assume that it would be impossible to load a plugin built with
Visual Studio 2015 into a Python distribution that was compiled using Visual
Studio 2008. However, no such issue exists: it's perfectly legitimate to
interface DLLs that are built with different compilers and/or C libraries.
Common gotchas to watch out for involve not ``free()``-ing memory region
that that were ``malloc()``-ed in another shared library, using data
structures with incompatible ABIs, and so on. pybind11 is very careful not
to make these types of mistakes.

Inconsistent detection of Python version in CMake and pybind11
==============================================================

The functions ``find_package(PythonInterp)`` and ``find_package(PythonLibs)`` provided by CMake
for Python version detection are not used by pybind11 due to unreliability and limitations that make
them unsuitable for pybind11's needs. Instead pybind provides its own, more reliable Python detection
CMake code. Conflicts can arise, however, when using pybind11 in a project that *also* uses the CMake
Python detection in a system with several Python versions installed.

This difference may cause inconsistencies and errors if *both* mechanisms are used in the same project. Consider the following
Cmake code executed in a system with Python 2.7 and 3.x installed:

.. code-block:: cmake

    find_package(PythonInterp)
    find_package(PythonLibs)
    find_package(pybind11)

It will detect Python 2.7 and pybind11 will pick it as well.

In contrast this code:

.. code-block:: cmake

    find_package(pybind11)
    find_package(PythonInterp)
    find_package(PythonLibs)

will detect Python 3.x for pybind11 and may crash on ``find_package(PythonLibs)`` afterwards.

It is advised to avoid using ``find_package(PythonInterp)`` and ``find_package(PythonLibs)`` from CMake and rely
on pybind11 in detecting Python version. If this is not possible CMake machinery should be called *before* including pybind11.

How to cite this project?
=========================

We suggest the following BibTeX template to cite pybind11 in scientific
discourse:

.. code-block:: bash

    @misc{pybind11,
       author = {Wenzel Jakob and Jason Rhinelander and Dean Moldovan},
       year = {2017},
       note = {https://github.com/pybind/pybind11},
       title = {pybind11 -- Seamless operability between C++11 and Python}
    }