configs/example/gem5_library/x86-parsec-benchmarks.py - public/gem5 - Git at Google

 # Copyright (c) 2021 The Regents of the University of California.
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
 # met: redistributions of source code must retain the above copyright
 # notice, this list of conditions and the following disclaimer;
 # redistributions in binary form must reproduce the above copyright
 # notice, this list of conditions and the following disclaimer in the
 # documentation and/or other materials provided with the distribution;
 # neither the name of the copyright holders nor the names of its
 # contributors may be used to endorse or promote products derived from
 # this software without specific prior written permission.
 #
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 """
 Script to run PARSEC benchmarks with gem5.
 The script expects a benchmark program name and the simulation
 size. The system is fixed with 2 CPU cores, MESI Two Level system
 cache and 3 GB DDR4 memory. It uses the x86 board.

 This script will count the total number of instructions executed
 in the ROI. It also tracks how much wallclock and simulated time.

 Usage:
 ------

 ```
 scons build/X86/gem5.opt
 ./build/X86/gem5.opt \
     configs/example/gem5_library/x86-parsec-benchmarks.py \
     --benchmark <benchmark_name> \
     --size <simulation_size>
 ```
 """
 import argparse
 import time

 import m5
 from m5.objects import Root

 from gem5.utils.requires import requires
 from gem5.components.boards.x86_board import X86Board
 from gem5.components.memory import DualChannelDDR4_2400
 from gem5.components.processors.simple_switchable_processor import(
     SimpleSwitchableProcessor,
 )
 from gem5.components.processors.cpu_types import CPUTypes
 from gem5.isas import ISA
 from gem5.coherence_protocol import CoherenceProtocol
 from gem5.resources.resource import Resource

 from m5.stats.gem5stats import get_simstat

 # We check for the required gem5 build.

 requires(
     isa_required = ISA.X86,
     coherence_protocol_required=CoherenceProtocol.MESI_TWO_LEVEL,
     kvm_required=True,
 )

 # Following are the list of benchmark programs for parsec.

 benchmark_choices = ["blackscholes", "bodytrack", "canneal", "dedup",
                      "facesim", "ferret", "fluidanimate", "freqmine",
                      "raytrace", "streamcluster", "swaptions", "vips", "x264"]

 # Following are the input size.

 size_choices=["simsmall", "simmedium", "simlarge"]

 parser = argparse.ArgumentParser(
     description="An example configuration script to run the npb benchmarks."
 )

 # The arguments accepted are the benchmark name and the simulation size.

 parser.add_argument(
     "--benchmark",
     type = str,
     required=True,
     help = "Input the benchmark program to execute.",
     choices = benchmark_choices,
 )

 parser.add_argument(
     "--size",
     type = str,
     required=True,
     help = "Simulation size the benchmark program.",
     choices = size_choices,
 )
 args = parser.parse_args()

 # Setting up all the fixed system parameters here
 # Caches: MESI Two Level Cache Hierarchy

 from gem5.components.cachehierarchies.ruby.\
     mesi_two_level_cache_hierarchy import(
     MESITwoLevelCacheHierarchy,
 )

 cache_hierarchy = MESITwoLevelCacheHierarchy(
     l1d_size = "32kB",
     l1d_assoc = 8,
     l1i_size="32kB",
     l1i_assoc=8,
     l2_size="256kB",
     l2_assoc=16,
     num_l2_banks=2,
 )

 # Memory: Dual Channel DDR4 2400 DRAM device.
 # The X86 board only supports 3 GB of main memory.

 memory = DualChannelDDR4_2400(size = "3GB")

 # Here we setup the processor. This is a special switchable processor in which
 # a starting core type and a switch core type must be specified. Once a
 # configuration is instantiated a user may call `processor.switch()` to switch
 # from the starting core types to the switch core types. In this simulation
 # we start with KVM cores to simulate the OS boot, then switch to the Timing
 # cores for the command we wish to run after boot.

 processor = SimpleSwitchableProcessor(
     starting_core_type=CPUTypes.KVM,
     switch_core_type=CPUTypes.TIMING,
     num_cores=2,
 )

 # Here we setup the board. The X86Board allows for Full-System X86 simulations

 board = X86Board(
     clk_freq="3GHz",
     processor=processor,
     memory=memory,
     cache_hierarchy=cache_hierarchy,
 )

 # Here we set the FS workload, i.e., parsec benchmark
 # After simulation has ended you may inspect
 # `m5out/system.pc.com_1.device` to the stdout, if any.

 # After the system boots, we execute the benchmark program and wait till the
 # ROI `workbegin` annotation is reached (m5_work_begin()). We start collecting
 # the number of committed instructions till ROI ends (marked by `workend`).
 # We then finish executing the rest of the benchmark.

 # Also, we sleep the system for some time so that the output is printed
 # properly.


 command = "cd /home/gem5/parsec-benchmark;".format(args.benchmark) \
     + "source env.sh;" \
     + "parsecmgmt -a run -p {} -c gcc-hooks -i {} \
         -n {};".format(args.benchmark, args.size, "2") \
     + "sleep 5;" \
     + "m5 exit;" \

 board.set_kernel_disk_workload(
     # The x86 linux kernel will be automatically downloaded to the
     # `~/.cache/gem5` directory if not already present.
     # PARSEC benchamarks were tested with kernel version 4.19.83
     kernel=Resource(
         "x86-linux-kernel-4.19.83",
     ),
     # The x86-parsec image will be automatically downloaded to the
     # `~/.cache/gem5` directory if not already present.
     disk_image=Resource(
         "x86-parsec",
     ),
     readfile_contents=command,
 )

 # We need this for long running processes.
 m5.disableAllListeners()

 root = Root(full_system = True, system = board)

 # sim_quantum must be set if KVM cores are used.

 root.sim_quantum = int(1e9)

 m5.instantiate()

 # We maintain the wall clock time.

 globalStart = time.time()

 print("Running the simulation")
 print("Using KVM cpu")

 start_tick = m5.curTick()
 end_tick = m5.curTick()
 m5.stats.reset()

 # We start the simulation

 exit_event = m5.simulate()

 # The first exit_event ends with a `workbegin` cause. This means that the
 # system booted successfully and the execution on the program started.

 if exit_event.getCause() == "workbegin":

     print("Done booting Linux")
     print("Resetting stats at the start of ROI!")

     m5.stats.reset()
     start_tick = m5.curTick()

     # We have completed up to this step using KVM cpu. Now we switch to timing
     # cpu for detailed simulation.

     processor.switch()
 else:
     # `workbegin` call was never encountered.

     print("Unexpected termination of simulation before ROI was reached!")
     print(
         "Exiting @ tick {} because {}.".format(
             m5.curTick(),
             exit_event.getCause()
         )
     )
     exit(-1)

 # The next exit_event is to simulate the ROI. It should be exited with a cause
 # marked by `workend`.

 exit_event = m5.simulate()

 # Reached the end of ROI.
 # We dump the stats here.

 # We exepect that ROI ends with `workend`. Otherwise the simulation ended
 # unexpectedly.
 if exit_event.getCause() == "workend":
     print("Dump stats at the end of the ROI!")

     m5.stats.dump()
     end_tick = m5.curTick()
 else:
     print("Unexpected termination of simulation while ROI was being executed!")
     print(
         "Exiting @ tick {} because {}.".format(
             m5.curTick(),
             exit_event.getCause()
         )
     )
     exit(-1)

 # ROI has ended here, and we get `simInsts` using get_simstat and print it in
 # the final print statement.

 gem5stats = get_simstat(root)

 # We get the number of committed instructions from the timing
 # cores. We then sum and print them at the end.
 roi_insts = float(\
     gem5stats.to_json()\
     ["system"]["processor"]["cores2"]["core"]["exec_context.thread_0"]\
     ["numInsts"]["value"]) + float(\
     gem5stats.to_json()\
     ["system"]["processor"]["cores3"]["core"]["exec_context.thread_0"]\
     ["numInsts"]["value"]\
 )

 # Simulation is over at this point. We acknowledge that all the simulation
 # events were successful.
 print("All simulation events were successful.")

 # We print the final simulation statistics.

 print("Done with the simulation")
 print()
 print("Performance statistics:")

 print("Simulated time in ROI: %.2fs" % ((end_tick-start_tick)/1e12))
 print("Instructions executed in ROI: %d" % ((roi_insts)))
 print("Ran a total of", m5.curTick()/1e12, "simulated seconds")
 print("Total wallclock time: %.2fs, %.2f min" % \
             (time.time()-globalStart, (time.time()-globalStart)/60))
	# Copyright (c) 2021 The Regents of the University of California.
	# All rights reserved.
	#
	# Redistribution and use in source and binary forms, with or without
	# modification, are permitted provided that the following conditions are
	# met: redistributions of source code must retain the above copyright
	# notice, this list of conditions and the following disclaimer;
	# redistributions in binary form must reproduce the above copyright
	# notice, this list of conditions and the following disclaimer in the
	# documentation and/or other materials provided with the distribution;
	# neither the name of the copyright holders nor the names of its
	# contributors may be used to endorse or promote products derived from
	# this software without specific prior written permission.
	#
	# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

	"""
	Script to run PARSEC benchmarks with gem5.
	The script expects a benchmark program name and the simulation
	size. The system is fixed with 2 CPU cores, MESI Two Level system
	cache and 3 GB DDR4 memory. It uses the x86 board.

	This script will count the total number of instructions executed
	in the ROI. It also tracks how much wallclock and simulated time.

	Usage:
	------

	```
	scons build/X86/gem5.opt
	./build/X86/gem5.opt \
	configs/example/gem5_library/x86-parsec-benchmarks.py \
	--benchmark <benchmark_name> \
	--size <simulation_size>
	```
	"""
	import argparse
	import time

	import m5
	from m5.objects import Root

	from gem5.utils.requires import requires
	from gem5.components.boards.x86_board import X86Board
	from gem5.components.memory import DualChannelDDR4_2400
	from gem5.components.processors.simple_switchable_processor import(
	SimpleSwitchableProcessor,
	)
	from gem5.components.processors.cpu_types import CPUTypes
	from gem5.isas import ISA
	from gem5.coherence_protocol import CoherenceProtocol
	from gem5.resources.resource import Resource

	from m5.stats.gem5stats import get_simstat

	# We check for the required gem5 build.

	requires(
	isa_required = ISA.X86,
	coherence_protocol_required=CoherenceProtocol.MESI_TWO_LEVEL,
	kvm_required=True,
	)

	# Following are the list of benchmark programs for parsec.

	benchmark_choices = ["blackscholes", "bodytrack", "canneal", "dedup",
	"facesim", "ferret", "fluidanimate", "freqmine",
	"raytrace", "streamcluster", "swaptions", "vips", "x264"]

	# Following are the input size.

	size_choices=["simsmall", "simmedium", "simlarge"]

	parser = argparse.ArgumentParser(
	description="An example configuration script to run the npb benchmarks."
	)

	# The arguments accepted are the benchmark name and the simulation size.

	parser.add_argument(
	"--benchmark",
	type = str,
	required=True,
	help = "Input the benchmark program to execute.",
	choices = benchmark_choices,
	)

	parser.add_argument(
	"--size",
	type = str,
	required=True,
	help = "Simulation size the benchmark program.",
	choices = size_choices,
	)
	args = parser.parse_args()

	# Setting up all the fixed system parameters here
	# Caches: MESI Two Level Cache Hierarchy

	from gem5.components.cachehierarchies.ruby.\
	mesi_two_level_cache_hierarchy import(
	MESITwoLevelCacheHierarchy,
	)

	cache_hierarchy = MESITwoLevelCacheHierarchy(
	l1d_size = "32kB",
	l1d_assoc = 8,
	l1i_size="32kB",
	l1i_assoc=8,
	l2_size="256kB",
	l2_assoc=16,
	num_l2_banks=2,
	)

	# Memory: Dual Channel DDR4 2400 DRAM device.
	# The X86 board only supports 3 GB of main memory.

	memory = DualChannelDDR4_2400(size = "3GB")

	# Here we setup the processor. This is a special switchable processor in which
	# a starting core type and a switch core type must be specified. Once a
	# configuration is instantiated a user may call `processor.switch()` to switch
	# from the starting core types to the switch core types. In this simulation
	# we start with KVM cores to simulate the OS boot, then switch to the Timing
	# cores for the command we wish to run after boot.

	processor = SimpleSwitchableProcessor(
	starting_core_type=CPUTypes.KVM,
	switch_core_type=CPUTypes.TIMING,
	num_cores=2,
	)

	# Here we setup the board. The X86Board allows for Full-System X86 simulations

	board = X86Board(
	clk_freq="3GHz",
	processor=processor,
	memory=memory,
	cache_hierarchy=cache_hierarchy,
	)

	# Here we set the FS workload, i.e., parsec benchmark
	# After simulation has ended you may inspect
	# `m5out/system.pc.com_1.device` to the stdout, if any.

	# After the system boots, we execute the benchmark program and wait till the
	# ROI `workbegin` annotation is reached (m5_work_begin()). We start collecting
	# the number of committed instructions till ROI ends (marked by `workend`).
	# We then finish executing the rest of the benchmark.

	# Also, we sleep the system for some time so that the output is printed
	# properly.


	command = "cd /home/gem5/parsec-benchmark;".format(args.benchmark) \
	+ "source env.sh;" \
	+ "parsecmgmt -a run -p {} -c gcc-hooks -i {} \
	-n {};".format(args.benchmark, args.size, "2") \
	+ "sleep 5;" \
	+ "m5 exit;" \

	board.set_kernel_disk_workload(
	# The x86 linux kernel will be automatically downloaded to the
	# `~/.cache/gem5` directory if not already present.
	# PARSEC benchamarks were tested with kernel version 4.19.83
	kernel=Resource(
	"x86-linux-kernel-4.19.83",
	),
	# The x86-parsec image will be automatically downloaded to the
	# `~/.cache/gem5` directory if not already present.
	disk_image=Resource(
	"x86-parsec",
	),
	readfile_contents=command,
	)

	# We need this for long running processes.
	m5.disableAllListeners()

	root = Root(full_system = True, system = board)

	# sim_quantum must be set if KVM cores are used.

	root.sim_quantum = int(1e9)

	m5.instantiate()

	# We maintain the wall clock time.

	globalStart = time.time()

	print("Running the simulation")
	print("Using KVM cpu")

	start_tick = m5.curTick()
	end_tick = m5.curTick()
	m5.stats.reset()

	# We start the simulation

	exit_event = m5.simulate()

	# The first exit_event ends with a `workbegin` cause. This means that the
	# system booted successfully and the execution on the program started.

	if exit_event.getCause() == "workbegin":

	print("Done booting Linux")
	print("Resetting stats at the start of ROI!")

	m5.stats.reset()
	start_tick = m5.curTick()

	# We have completed up to this step using KVM cpu. Now we switch to timing
	# cpu for detailed simulation.

	processor.switch()
	else:
	# `workbegin` call was never encountered.

	print("Unexpected termination of simulation before ROI was reached!")
	print(
	"Exiting @ tick {} because {}.".format(
	m5.curTick(),
	exit_event.getCause()
	)
	)
	exit(-1)

	# The next exit_event is to simulate the ROI. It should be exited with a cause
	# marked by `workend`.

	exit_event = m5.simulate()

	# Reached the end of ROI.
	# We dump the stats here.

	# We exepect that ROI ends with `workend`. Otherwise the simulation ended
	# unexpectedly.
	if exit_event.getCause() == "workend":
	print("Dump stats at the end of the ROI!")

	m5.stats.dump()
	end_tick = m5.curTick()
	else:
	print("Unexpected termination of simulation while ROI was being executed!")
	print(
	"Exiting @ tick {} because {}.".format(
	m5.curTick(),
	exit_event.getCause()
	)
	)
	exit(-1)

	# ROI has ended here, and we get `simInsts` using get_simstat and print it in
	# the final print statement.

	gem5stats = get_simstat(root)

	# We get the number of committed instructions from the timing
	# cores. We then sum and print them at the end.
	roi_insts = float(\
	gem5stats.to_json()\
	["system"]["processor"]["cores2"]["core"]["exec_context.thread_0"]\
	["numInsts"]["value"]) + float(\
	gem5stats.to_json()\
	["system"]["processor"]["cores3"]["core"]["exec_context.thread_0"]\
	["numInsts"]["value"]\
	)

	# Simulation is over at this point. We acknowledge that all the simulation
	# events were successful.
	print("All simulation events were successful.")

	# We print the final simulation statistics.

	print("Done with the simulation")
	print()
	print("Performance statistics:")

	print("Simulated time in ROI: %.2fs" % ((end_tick-start_tick)/1e12))
	print("Instructions executed in ROI: %d" % ((roi_insts)))
	print("Ran a total of", m5.curTick()/1e12, "simulated seconds")
	print("Total wallclock time: %.2fs, %.2f min" % \
	(time.time()-globalStart, (time.time()-globalStart)/60))