blob: b6eda619322dfe8cfe141da9891496a0a478f125 [file] [log] [blame]
#!/bin/bash
# Copyright (c) 2021 The Regents of the University of California
# All Rights Reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
set -e
set -x
dir="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
gem5_root="${dir}/.."
# We assume the first two arguments are the number of threads followed by the
# GPU ISA to test. These default to 1 and GCN3_X86 is no argument is given.
threads=1
gpu_isa=GCN3_X86
if [[ $# -eq 1 ]]; then
threads=$1
elif [[ $# -eq 2 ]]; then
threads=$1
gpu_isa=$2
else
if [[ $# -gt 0 ]]; then
echo "Invalid number of arguments: $#"
exit 1
fi
fi
if [[ "$gpu_isa" != "GCN3_X86" ]] && [[ "$gpu_isa" != "VEGA_X86" ]]; then
echo "Invalid GPU ISA: $gpu_isa"
exit 1
fi
# Run the gem5 very-long tests.
docker run -u $UID:$GID --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}"/tests --rm \
gcr.io/gem5-test/ubuntu-20.04_all-dependencies:v21-2 \
./main.py run --length very-long -j${threads} -t${threads} -vv
mkdir -p tests/testing-results
# GPU weekly tests start here
# before pulling gem5 resources, make sure it doesn't exist already
docker run --rm --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}" gcr.io/gem5-test/gcn-gpu:v21-2 bash -c \
"rm -rf ${gem5_root}/gem5-resources"
# delete Pannotia datasets and output files in case a failed regression run left
# them around
rm -f coAuthorsDBLP.graph 1k_128k.gr result.out
# Pull gem5 resources to the root of the gem5 directory -- currently the
# pre-built binares for LULESH are out-of-date and won't run correctly with
# ROCm 4.0. In the meantime, we can build the binary as part of this script.
# Moreover, DNNMark builds a library and thus doesn't have a binary, so we
# need to build it before we run it.
# Need to pull this first because HACC's docker requires this path to exist
git clone https://gem5.googlesource.com/public/gem5-resources \
"${gem5_root}/gem5-resources"
# The following script is to ensure these tests are runnable as the resources
# directory changes over time. The gem5 resources repository stable branch is
# tagged upon the new release for that of the previous release. For example,
# when v22.0 is released, the stable branch will be tagged with "v21.2.X.X"
# prior to the merging of the develop/staging branch into the stable branch.
# This is so a user may revert the gem5-resources sources back to a state
# compatable with a particular major release.
#
# To ensure the v21.2 version of these tests continues to run as future
# versions are released, we run this check. If there's been another release,
# we checkout the correct version of gem5 resources.
cd "${gem5_root}/gem5-resources"
version_tag=$(git tag | grep "v21.2")
if [[ ${version_tag} != "" ]]; then
git checkout "${version_tag}"
fi
cd "${gem5_root}"
# For the GPU tests we compile and run the GPU ISA inside a gcn-gpu container.
# HACC requires setting numerous environment variables to run correctly. To
# avoid needing to set all of these, we instead build a docker for it, which
# has all these variables pre-set in its Dockerfile
# To avoid compiling gem5 multiple times, all GPU benchmarks will use this
docker pull gcr.io/gem5-test/gcn-gpu:v21-2
docker build -t hacc-test-weekly ${gem5_root}/gem5-resources/src/gpu/halo-finder
docker run --rm -u $UID:$GID --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}" hacc-test-weekly bash -c \
"scons build/${gpu_isa}/gem5.opt -j${threads} \
|| rm -rf build && scons build/${gpu_isa}/gem5.opt -j${threads}"
# Some of the apps we test use m5ops (and x86), so compile them for x86
# Note: setting TERM in the environment is necessary as scons fails for m5ops if
# it is not set.
docker run --rm -u $UID:$GID --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}/util/m5" hacc-test-weekly bash -c \
"export TERM=xterm-256color ; scons build/x86/out/m5"
# test LULESH
# build LULESH
docker run --rm --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}/gem5-resources/src/gpu/lulesh" \
-u $UID:$GID hacc-test-weekly bash -c \
"make"
# LULESH is heavily used in the HPC community on GPUs, and does a good job of
# stressing several GPU compute and memory components
docker run --rm -u $UID:$GID --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}" hacc-test-weekly build/${gpu_isa}/gem5.opt \
configs/example/apu_se.py -n3 --mem-size=8GB --reg-alloc-policy=dynamic \
--benchmark-root="${gem5_root}/gem5-resources/src/gpu/lulesh/bin" -c lulesh
# test DNNMark
# setup cmake for DNNMark
docker run --rm -u $UID:$GID --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}/gem5-resources/src/gpu/DNNMark" \
hacc-test-weekly bash -c "./setup.sh HIP"
# make the DNNMark library
docker run --rm -u $UID:$GID --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}/gem5-resources/src/gpu/DNNMark/build" \
hacc-test-weekly bash -c "make -j${threads}"
# generate cachefiles -- since we are testing gfx801 and 4 CUs (default config)
# in tester, we want cachefiles for this setup
docker run --rm --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}/gem5-resources/src/gpu/DNNMark" \
"-v${gem5_root}/gem5-resources/src/gpu/DNNMark/cachefiles:/root/.cache/miopen/2.9.0" \
hacc-test-weekly bash -c \
"python3 generate_cachefiles.py cachefiles.csv --gfx-version=gfx801 \
--num-cus=4"
# generate mmap data for DNNMark (makes simulation much faster)
docker run --rm -u $UID:$GID --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}/gem5-resources/src/gpu/DNNMark" hacc-test-weekly bash -c \
"g++ -std=c++0x generate_rand_data.cpp -o generate_rand_data"
docker run --rm -u $UID:$GID --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}/gem5-resources/src/gpu/DNNMark" hacc-test-weekly bash -c \
"./generate_rand_data"
# now we can run DNNMark!
# DNNMark is representative of several simple (fast) layers within ML
# applications, which are heavily used in modern GPU applications. So, we want
# to make sure support for these applications are tested. Run three variants:
# fwd_softmax, bwd_bn, fwd_pool; these tests ensure we run a variety of ML kernels,
# including both inference and training
docker run --rm --volume "${gem5_root}":"${gem5_root}" -v \
"${gem5_root}/gem5-resources/src/gpu/DNNMark/cachefiles:/root/.cache/miopen/2.9.0" \
-w "${gem5_root}/gem5-resources/src/gpu/DNNMark" hacc-test-weekly \
"${gem5_root}/build/${gpu_isa}/gem5.opt" "${gem5_root}/configs/example/apu_se.py" -n3 \
--reg-alloc-policy=dynamic \
--benchmark-root="${gem5_root}/gem5-resources/src/gpu/DNNMark/build/benchmarks/test_fwd_softmax" \
-c dnnmark_test_fwd_softmax \
--options="-config ${gem5_root}/gem5-resources/src/gpu/DNNMark/config_example/softmax_config.dnnmark \
-mmap ${gem5_root}/gem5-resources/src/gpu/DNNMark/mmap.bin"
docker run --rm --volume "${gem5_root}":"${gem5_root}" -v \
"${gem5_root}/gem5-resources/src/gpu/DNNMark/cachefiles:/root/.cache/miopen/2.9.0" \
-w "${gem5_root}/gem5-resources/src/gpu/DNNMark" hacc-test-weekly \
"${gem5_root}/build/${gpu_isa}/gem5.opt" "${gem5_root}/configs/example/apu_se.py" -n3 \
--reg-alloc-policy=dynamic \
--benchmark-root="${gem5_root}/gem5-resources/src/gpu/DNNMark/build/benchmarks/test_fwd_pool" \
-c dnnmark_test_fwd_pool \
--options="-config ${gem5_root}/gem5-resources/src/gpu/DNNMark/config_example/pool_config.dnnmark \
-mmap ${gem5_root}/gem5-resources/src/gpu/DNNMark/mmap.bin"
docker run --rm --volume "${gem5_root}":"${gem5_root}" -v \
"${gem5_root}/gem5-resources/src/gpu/DNNMark/cachefiles:/root/.cache/miopen/2.9.0" \
-w "${gem5_root}/gem5-resources/src/gpu/DNNMark" hacc-test-weekly \
"${gem5_root}/build/${gpu_isa}/gem5.opt" "${gem5_root}/configs/example/apu_se.py" -n3 \
--reg-alloc-policy=dynamic \
--benchmark-root="${gem5_root}/gem5-resources/src/gpu/DNNMark/build/benchmarks/test_bwd_bn" \
-c dnnmark_test_bwd_bn \
--options="-config ${gem5_root}/gem5-resources/src/gpu/DNNMark/config_example/bn_config.dnnmark \
-mmap ${gem5_root}/gem5-resources/src/gpu/DNNMark/mmap.bin"
# test HACC
# build HACC
docker run --rm -v ${PWD}:${PWD} -w \
"${gem5_root}/gem5-resources/src/gpu/halo-finder/src" -u $UID:$GID \
hacc-test-weekly make hip/ForceTreeTest
# Like LULESH, HACC is heavily used in the HPC community and is used to stress
# the GPU memory system
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/halo-finder/src/hip \
-c ForceTreeTest --options="0.5 0.1 64 0.1 1 N 12 rcb"
# test Pannotia
# Pannotia has 6 different benchmarks (BC, Color, FW, MIS, PageRank, SSSP), of
# which 3 (Color, PageRank, SSSP) have 2 different variants. Since they are
# useful for testing irregular GPU application behavior, we test each.
# build BC
docker run --rm -v ${PWD}:${PWD} \
-w ${gem5_root}/gem5-resources/src/gpu/pannotia/bc -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; make gem5-fusion"
# # get input dataset for BC test
wget http://dist.gem5.org/dist/v21-2/datasets/pannotia/bc/1k_128k.gr
# run BC
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=gem5-resources/src/gpu/pannotia/bc/bin -c bc.gem5 \
--options="1k_128k.gr"
# build Color Max
docker run --rm -v ${gem5_root}:${gem5_root} -w \
${gem5_root}/gem5-resources/src/gpu/pannotia/color -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; make gem5-fusion"
# run Color (Max) (use same input dataset as BC for faster testing)
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/pannotia/color/bin \
-c color_max.gem5 --options="1k_128k.gr 0"
# build Color (MaxMin)
docker run --rm -v ${gem5_root}:${gem5_root} -w \
${gem5_root}/gem5-resources/src/gpu/pannotia/color -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; export VARIANT=MAXMIN ; make gem5-fusion"
# run Color (MaxMin) (use same input dataset as BC for faster testing)
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/pannotia/color/bin \
-c color_maxmin.gem5 --options="1k_128k.gr 0"
# build FW
docker run --rm -v ${gem5_root}:${gem5_root} -w \
${gem5_root}/gem5-resources/src/gpu/pannotia/fw -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; make gem5-fusion"
# run FW (use same input dataset as BC for faster testing)
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/pannotia/fw/bin \
-c fw_hip.gem5 --options="1k_128k.gr"
# build MIS
docker run --rm -v ${gem5_root}:${gem5_root} -w \
${gem5_root}/gem5-resources/src/gpu/pannotia/mis -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; make gem5-fusion"
# run MIS (use same input dataset as BC for faster testing)
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/pannotia/mis/bin \
-c mis_hip.gem5 --options="1k_128k.gr 0"
# build Pagerank Default variant
docker run --rm -v ${gem5_root}:${gem5_root} -w \
${gem5_root}/gem5-resources/src/gpu/pannotia/pagerank -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; make gem5-fusion"
# get PageRank input dataset
wget http://dist.gem5.org/dist/v21-2/datasets/pannotia/pagerank/coAuthorsDBLP.graph
# run PageRank (Default)
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/pannotia/pagerank/bin \
-c pagerank.gem5 --options="coAuthorsDBLP.graph 1"
# build PageRank SPMV variant
docker run --rm -v ${gem5_root}:${gem5_root} -w \
${gem5_root}/gem5-resources/src/gpu/pannotia/pagerank -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; export VARIANT=SPMV ; make gem5-fusion"
# run PageRank (SPMV)
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/pannotia/pagerank/bin \
-c pagerank_spmv.gem5 --options="coAuthorsDBLP.graph 1"
# build SSSP CSR variant
docker run --rm -v ${gem5_root}:${gem5_root} -w \
${gem5_root}/gem5-resources/src/gpu/pannotia/sssp -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; make gem5-fusion"
# run SSSP (CSR) (use same input dataset as BC for faster testing)
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/pannotia/sssp/bin \
-c sssp.gem5 --options="1k_128k.gr 0"
# build SSSP ELL variant
docker run --rm -v ${gem5_root}:${gem5_root} -w \
${gem5_root}/gem5-resources/src/gpu/pannotia/sssp -u $UID:$GID \
hacc-test-weekly bash -c \
"export GEM5_PATH=${gem5_root} ; export VARIANT=ELL ; make gem5-fusion"
# run SSSP (ELL) (use same input dataset as BC for faster testing)
docker run --rm -v ${gem5_root}:${gem5_root} -w ${gem5_root} -u $UID:$GID \
hacc-test-weekly ${gem5_root}/build/${gpu_isa}/gem5.opt \
${gem5_root}/configs/example/apu_se.py -n3 --mem-size=8GB \
--reg-alloc-policy=dynamic \
--benchmark-root=${gem5_root}/gem5-resources/src/gpu/pannotia/sssp/bin \
-c sssp_ell.gem5 --options="1k_128k.gr 0"
# Delete the gem5 resources repo we created -- need to do in docker because of
# cachefiles DNNMark creates
docker run --rm --volume "${gem5_root}":"${gem5_root}" -w \
"${gem5_root}" hacc-test-weekly bash -c \
"rm -rf ${gem5_root}/gem5-resources"
# delete Pannotia datasets we downloaded and output files it created
rm -f coAuthorsDBLP.graph 1k_128k.gr result.out