| # Copyright (c) 2021,2022 ARM Limited |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| """ |
| Definitions for CHI nodes and controller types. These are used by |
| create_system in configs/ruby/CHI.py or may be used in custom configuration |
| scripts. When used with create_system, the user may provide an additional |
| configuration file as the --chi-config parameter to specialize the classes |
| defined here. |
| |
| When using the CustomMesh topology, --chi-config must be provided with |
| specialization of the NoC_Param classes defining the NoC dimensions and |
| node to router binding. See configs/example/noc_config/2x4.py for an example. |
| """ |
| |
| import math |
| import m5 |
| from m5.objects import * |
| |
| |
| class Versions: |
| """ |
| Helper class to obtain unique ids for a given controller class. |
| These are passed as the 'version' parameter when creating the controller. |
| """ |
| |
| _seqs = 0 |
| |
| @classmethod |
| def getSeqId(cls): |
| val = cls._seqs |
| cls._seqs += 1 |
| return val |
| |
| _version = {} |
| |
| @classmethod |
| def getVersion(cls, tp): |
| if tp not in cls._version: |
| cls._version[tp] = 0 |
| val = cls._version[tp] |
| cls._version[tp] = val + 1 |
| return val |
| |
| |
| class NoC_Params: |
| """ |
| Default parameters for the interconnect. The value of data_width is |
| also used to set the data_channel_size for all CHI controllers. |
| (see configs/ruby/CHI.py) |
| """ |
| |
| router_link_latency = 1 |
| node_link_latency = 1 |
| router_latency = 1 |
| router_buffer_size = 4 |
| cntrl_msg_size = 8 |
| data_width = 32 |
| cross_links = [] |
| cross_link_latency = 0 |
| |
| |
| class CHI_Node(SubSystem): |
| """ |
| Base class with common functions for setting up Cache or Memory |
| controllers that are part of a CHI RNF, RNFI, HNF, or SNF nodes. |
| Notice getNetworkSideControllers and getAllControllers must be implemented |
| in the derived classes. |
| """ |
| |
| class NoC_Params: |
| """ |
| NoC config. parameters and bindings required for CustomMesh topology. |
| |
| Maps 'num_nodes_per_router' CHI nodes to each router provided in |
| 'router_list'. This assumes len(router_list)*num_nodes_per_router |
| equals the number of nodes |
| If 'num_nodes_per_router' is left undefined, we circulate around |
| 'router_list' until all nodes are mapped. |
| See 'distributeNodes' in configs/topologies/CustomMesh.py |
| """ |
| |
| num_nodes_per_router = None |
| router_list = None |
| |
| def __init__(self, ruby_system): |
| super(CHI_Node, self).__init__() |
| self._ruby_system = ruby_system |
| self._network = ruby_system.network |
| |
| def getNetworkSideControllers(self): |
| """ |
| Returns all ruby controllers that need to be connected to the |
| network |
| """ |
| raise NotImplementedError() |
| |
| def getAllControllers(self): |
| """ |
| Returns all ruby controllers associated with this node |
| """ |
| raise NotImplementedError() |
| |
| def setDownstream(self, cntrls): |
| """ |
| Sets cntrls as the downstream list of all controllers in this node |
| """ |
| for c in self.getNetworkSideControllers(): |
| c.downstream_destinations = cntrls |
| |
| def connectController(self, cntrl): |
| """ |
| Creates and configures the messages buffers for the CHI input/output |
| ports that connect to the network |
| """ |
| cntrl.reqOut = MessageBuffer() |
| cntrl.rspOut = MessageBuffer() |
| cntrl.snpOut = MessageBuffer() |
| cntrl.datOut = MessageBuffer() |
| cntrl.reqIn = MessageBuffer() |
| cntrl.rspIn = MessageBuffer() |
| cntrl.snpIn = MessageBuffer() |
| cntrl.datIn = MessageBuffer() |
| |
| # All CHI ports are always connected to the network. |
| # Controllers that are not part of the getNetworkSideControllers list |
| # still communicate using internal routers, thus we need to wire-up the |
| # ports |
| cntrl.reqOut.out_port = self._network.in_port |
| cntrl.rspOut.out_port = self._network.in_port |
| cntrl.snpOut.out_port = self._network.in_port |
| cntrl.datOut.out_port = self._network.in_port |
| cntrl.reqIn.in_port = self._network.out_port |
| cntrl.rspIn.in_port = self._network.out_port |
| cntrl.snpIn.in_port = self._network.out_port |
| cntrl.datIn.in_port = self._network.out_port |
| |
| |
| class TriggerMessageBuffer(MessageBuffer): |
| """ |
| MessageBuffer for triggering internal controller events. |
| These buffers should not be affected by the Ruby tester randomization |
| and allow poping messages enqueued in the same cycle. |
| """ |
| |
| randomization = "disabled" |
| allow_zero_latency = True |
| |
| |
| class OrderedTriggerMessageBuffer(TriggerMessageBuffer): |
| ordered = True |
| |
| |
| class MemCtrlMessageBuffer(MessageBuffer): |
| """ |
| MessageBuffer exchanging messages with the memory |
| These buffers should also not be affected by the Ruby tester randomization. |
| """ |
| |
| randomization = "disabled" |
| ordered = True |
| |
| |
| class CHI_Cache_Controller(Cache_Controller): |
| """ |
| Default parameters for a Cache controller |
| The Cache_Controller can also be used as a DMA requester or as |
| a pure directory if all cache allocation policies are disabled. |
| """ |
| |
| def __init__(self, ruby_system): |
| super(CHI_Cache_Controller, self).__init__( |
| version=Versions.getVersion(Cache_Controller), |
| ruby_system=ruby_system, |
| mandatoryQueue=MessageBuffer(), |
| prefetchQueue=MessageBuffer(), |
| triggerQueue=TriggerMessageBuffer(), |
| retryTriggerQueue=OrderedTriggerMessageBuffer(), |
| replTriggerQueue=OrderedTriggerMessageBuffer(), |
| reqRdy=TriggerMessageBuffer(), |
| snpRdy=TriggerMessageBuffer(), |
| ) |
| # Set somewhat large number since we really a lot on internal |
| # triggers. To limit the controller performance, tweak other |
| # params such as: input port buffer size, cache banks, and output |
| # port latency |
| self.transitions_per_cycle = 1024 |
| # This should be set to true in the data cache controller to enable |
| # timeouts on unique lines when a store conditional fails |
| self.sc_lock_enabled = False |
| |
| |
| class CHI_L1Controller(CHI_Cache_Controller): |
| """ |
| Default parameters for a L1 Cache controller |
| """ |
| |
| def __init__(self, ruby_system, sequencer, cache, prefetcher): |
| super(CHI_L1Controller, self).__init__(ruby_system) |
| self.sequencer = sequencer |
| self.cache = cache |
| self.use_prefetcher = False |
| self.send_evictions = True |
| self.is_HN = False |
| self.enable_DMT = False |
| self.enable_DCT = False |
| # Strict inclusive MOESI |
| self.allow_SD = True |
| self.alloc_on_seq_acc = True |
| self.alloc_on_seq_line_write = False |
| self.alloc_on_readshared = True |
| self.alloc_on_readunique = True |
| self.alloc_on_readonce = True |
| self.alloc_on_writeback = True |
| self.dealloc_on_unique = False |
| self.dealloc_on_shared = False |
| self.dealloc_backinv_unique = True |
| self.dealloc_backinv_shared = True |
| # Some reasonable default TBE params |
| self.number_of_TBEs = 16 |
| self.number_of_repl_TBEs = 16 |
| self.number_of_snoop_TBEs = 4 |
| self.number_of_DVM_TBEs = 16 |
| self.number_of_DVM_snoop_TBEs = 4 |
| |
| self.unify_repl_TBEs = False |
| |
| |
| class CHI_L2Controller(CHI_Cache_Controller): |
| """ |
| Default parameters for a L2 Cache controller |
| """ |
| |
| def __init__(self, ruby_system, cache, prefetcher): |
| super(CHI_L2Controller, self).__init__(ruby_system) |
| self.sequencer = NULL |
| self.cache = cache |
| self.use_prefetcher = False |
| self.allow_SD = True |
| self.is_HN = False |
| self.enable_DMT = False |
| self.enable_DCT = False |
| self.send_evictions = False |
| # Strict inclusive MOESI |
| self.alloc_on_seq_acc = False |
| self.alloc_on_seq_line_write = False |
| self.alloc_on_readshared = True |
| self.alloc_on_readunique = True |
| self.alloc_on_readonce = True |
| self.alloc_on_writeback = True |
| self.dealloc_on_unique = False |
| self.dealloc_on_shared = False |
| self.dealloc_backinv_unique = True |
| self.dealloc_backinv_shared = True |
| # Some reasonable default TBE params |
| self.number_of_TBEs = 32 |
| self.number_of_repl_TBEs = 32 |
| self.number_of_snoop_TBEs = 16 |
| self.number_of_DVM_TBEs = 1 # should not receive any dvm |
| self.number_of_DVM_snoop_TBEs = 1 # should not receive any dvm |
| self.unify_repl_TBEs = False |
| |
| |
| class CHI_HNFController(CHI_Cache_Controller): |
| """ |
| Default parameters for a coherent home node (HNF) cache controller |
| """ |
| |
| def __init__(self, ruby_system, cache, prefetcher, addr_ranges): |
| super(CHI_HNFController, self).__init__(ruby_system) |
| self.sequencer = NULL |
| self.cache = cache |
| self.use_prefetcher = False |
| self.addr_ranges = addr_ranges |
| self.allow_SD = True |
| self.is_HN = True |
| self.enable_DMT = True |
| self.enable_DCT = True |
| self.send_evictions = False |
| # MOESI / Mostly inclusive for shared / Exclusive for unique |
| self.alloc_on_seq_acc = False |
| self.alloc_on_seq_line_write = False |
| self.alloc_on_readshared = True |
| self.alloc_on_readunique = False |
| self.alloc_on_readonce = True |
| self.alloc_on_writeback = True |
| self.dealloc_on_unique = True |
| self.dealloc_on_shared = False |
| self.dealloc_backinv_unique = False |
| self.dealloc_backinv_shared = False |
| # Some reasonable default TBE params |
| self.number_of_TBEs = 32 |
| self.number_of_repl_TBEs = 32 |
| self.number_of_snoop_TBEs = 1 # should not receive any snoop |
| self.number_of_DVM_TBEs = 1 # should not receive any dvm |
| self.number_of_DVM_snoop_TBEs = 1 # should not receive any dvm |
| self.unify_repl_TBEs = False |
| |
| |
| class CHI_MNController(MiscNode_Controller): |
| """ |
| Default parameters for a Misc Node |
| """ |
| |
| def __init__( |
| self, ruby_system, addr_range, l1d_caches, early_nonsync_comp |
| ): |
| super(CHI_MNController, self).__init__( |
| version=Versions.getVersion(MiscNode_Controller), |
| ruby_system=ruby_system, |
| mandatoryQueue=MessageBuffer(), |
| triggerQueue=TriggerMessageBuffer(), |
| retryTriggerQueue=TriggerMessageBuffer(), |
| schedRspTriggerQueue=TriggerMessageBuffer(), |
| reqRdy=TriggerMessageBuffer(), |
| snpRdy=TriggerMessageBuffer(), |
| ) |
| # Set somewhat large number since we really a lot on internal |
| # triggers. To limit the controller performance, tweak other |
| # params such as: input port buffer size, cache banks, and output |
| # port latency |
| self.transitions_per_cycle = 1024 |
| self.addr_ranges = [addr_range] |
| # 16 total transaction buffer entries, but 1 is reserved for DVMNonSync |
| self.number_of_DVM_TBEs = 16 |
| self.number_of_non_sync_TBEs = 1 |
| self.early_nonsync_comp = early_nonsync_comp |
| |
| # "upstream_destinations" = targets for DVM snoops |
| self.upstream_destinations = l1d_caches |
| |
| |
| class CHI_DMAController(CHI_Cache_Controller): |
| """ |
| Default parameters for a DMA controller |
| """ |
| |
| def __init__(self, ruby_system, sequencer): |
| super(CHI_DMAController, self).__init__(ruby_system) |
| self.sequencer = sequencer |
| |
| class DummyCache(RubyCache): |
| dataAccessLatency = 0 |
| tagAccessLatency = 1 |
| size = "128" |
| assoc = 1 |
| |
| self.use_prefetcher = False |
| self.cache = DummyCache() |
| self.sequencer.dcache = NULL |
| # All allocations are false |
| # Deallocations are true (don't really matter) |
| self.allow_SD = False |
| self.is_HN = False |
| self.enable_DMT = False |
| self.enable_DCT = False |
| self.alloc_on_seq_acc = False |
| self.alloc_on_seq_line_write = False |
| self.alloc_on_readshared = False |
| self.alloc_on_readunique = False |
| self.alloc_on_readonce = False |
| self.alloc_on_writeback = False |
| self.dealloc_on_unique = False |
| self.dealloc_on_shared = False |
| self.dealloc_backinv_unique = False |
| self.dealloc_backinv_shared = False |
| self.send_evictions = False |
| self.number_of_TBEs = 16 |
| self.number_of_repl_TBEs = 1 |
| self.number_of_snoop_TBEs = 1 # should not receive any snoop |
| self.number_of_DVM_TBEs = 1 # should not receive any dvm |
| self.number_of_DVM_snoop_TBEs = 1 # should not receive any dvm |
| self.unify_repl_TBEs = False |
| |
| |
| class CPUSequencerWrapper: |
| """ |
| Other generic configuration scripts assume a matching number of sequencers |
| and cpus. This wraps the instruction and data sequencer so they are |
| compatible with the other scripts. This assumes all scripts are using |
| connectCpuPorts/connectIOPorts to bind ports |
| """ |
| |
| def __init__(self, iseq, dseq): |
| # use this style due to __setattr__ override below |
| self.__dict__["inst_seq"] = iseq |
| self.__dict__["data_seq"] = dseq |
| self.__dict__["support_data_reqs"] = True |
| self.__dict__["support_inst_reqs"] = True |
| # Compatibility with certain scripts that wire up ports |
| # without connectCpuPorts |
| self.__dict__["in_ports"] = dseq.in_ports |
| |
| def connectCpuPorts(self, cpu): |
| assert isinstance(cpu, BaseCPU) |
| cpu.icache_port = self.inst_seq.in_ports |
| for p in cpu._cached_ports: |
| if str(p) != "icache_port": |
| exec(f"cpu.{p} = self.data_seq.in_ports") |
| cpu.connectUncachedPorts( |
| self.data_seq.in_ports, self.data_seq.interrupt_out_port |
| ) |
| |
| def connectIOPorts(self, piobus): |
| self.data_seq.connectIOPorts(piobus) |
| |
| def __setattr__(self, name, value): |
| setattr(self.inst_seq, name, value) |
| setattr(self.data_seq, name, value) |
| |
| |
| class CHI_RNF(CHI_Node): |
| """ |
| Defines a CHI request node. |
| Notice all contollers and sequencers are set as children of the cpus, so |
| this object acts more like a proxy for seting things up and has no topology |
| significance unless the cpus are set as its children at the top level |
| """ |
| |
| def __init__( |
| self, |
| cpus, |
| ruby_system, |
| l1Icache_type, |
| l1Dcache_type, |
| cache_line_size, |
| l1Iprefetcher_type=None, |
| l1Dprefetcher_type=None, |
| ): |
| super(CHI_RNF, self).__init__(ruby_system) |
| |
| self._block_size_bits = int(math.log(cache_line_size, 2)) |
| |
| # All sequencers and controllers |
| self._seqs = [] |
| self._cntrls = [] |
| |
| # Last level controllers in this node, i.e., the ones that will send |
| # requests to the home nodes |
| self._ll_cntrls = [] |
| |
| self._cpus = cpus |
| |
| # First creates L1 caches and sequencers |
| for cpu in self._cpus: |
| cpu.inst_sequencer = RubySequencer( |
| version=Versions.getSeqId(), ruby_system=ruby_system |
| ) |
| cpu.data_sequencer = RubySequencer( |
| version=Versions.getSeqId(), ruby_system=ruby_system |
| ) |
| |
| self._seqs.append( |
| CPUSequencerWrapper(cpu.inst_sequencer, cpu.data_sequencer) |
| ) |
| |
| # caches |
| l1i_cache = l1Icache_type( |
| start_index_bit=self._block_size_bits, is_icache=True |
| ) |
| |
| l1d_cache = l1Dcache_type( |
| start_index_bit=self._block_size_bits, is_icache=False |
| ) |
| |
| # Placeholders for future prefetcher support |
| if l1Iprefetcher_type != None or l1Dprefetcher_type != None: |
| m5.fatal("Prefetching not supported yet") |
| l1i_pf = NULL |
| l1d_pf = NULL |
| |
| # cache controllers |
| cpu.l1i = CHI_L1Controller( |
| ruby_system, cpu.inst_sequencer, l1i_cache, l1i_pf |
| ) |
| |
| cpu.l1d = CHI_L1Controller( |
| ruby_system, cpu.data_sequencer, l1d_cache, l1d_pf |
| ) |
| |
| cpu.inst_sequencer.dcache = NULL |
| cpu.data_sequencer.dcache = cpu.l1d.cache |
| |
| cpu.l1d.sc_lock_enabled = True |
| |
| cpu._ll_cntrls = [cpu.l1i, cpu.l1d] |
| for c in cpu._ll_cntrls: |
| self._cntrls.append(c) |
| self.connectController(c) |
| self._ll_cntrls.append(c) |
| |
| def getSequencers(self): |
| return self._seqs |
| |
| def getAllControllers(self): |
| return self._cntrls |
| |
| def getNetworkSideControllers(self): |
| return self._cntrls |
| |
| def setDownstream(self, cntrls): |
| for c in self._ll_cntrls: |
| c.downstream_destinations = cntrls |
| |
| def getCpus(self): |
| return self._cpus |
| |
| # Adds a private L2 for each cpu |
| def addPrivL2Cache(self, cache_type, pf_type=None): |
| self._ll_cntrls = [] |
| for cpu in self._cpus: |
| l2_cache = cache_type( |
| start_index_bit=self._block_size_bits, is_icache=False |
| ) |
| if pf_type != None: |
| m5.fatal("Prefetching not supported yet") |
| l2_pf = NULL |
| |
| cpu.l2 = CHI_L2Controller(self._ruby_system, l2_cache, l2_pf) |
| |
| self._cntrls.append(cpu.l2) |
| self.connectController(cpu.l2) |
| |
| self._ll_cntrls.append(cpu.l2) |
| |
| for c in cpu._ll_cntrls: |
| c.downstream_destinations = [cpu.l2] |
| cpu._ll_cntrls = [cpu.l2] |
| |
| |
| class CHI_HNF(CHI_Node): |
| """ |
| Encapsulates an HNF cache/directory controller. |
| Before the first controller is created, the class method |
| CHI_HNF.createAddrRanges must be called before creating any CHI_HNF object |
| to set-up the interleaved address ranges used by the HNFs |
| """ |
| |
| class NoC_Params(CHI_Node.NoC_Params): |
| """HNFs may also define the 'pairing' parameter to allow pairing""" |
| |
| pairing = None |
| |
| _addr_ranges = {} |
| |
| @classmethod |
| def createAddrRanges(cls, sys_mem_ranges, cache_line_size, hnfs): |
| # Create the HNFs interleaved addr ranges |
| block_size_bits = int(math.log(cache_line_size, 2)) |
| llc_bits = int(math.log(len(hnfs), 2)) |
| numa_bit = block_size_bits + llc_bits - 1 |
| for i, hnf in enumerate(hnfs): |
| ranges = [] |
| for r in sys_mem_ranges: |
| addr_range = AddrRange( |
| r.start, |
| size=r.size(), |
| intlvHighBit=numa_bit, |
| intlvBits=llc_bits, |
| intlvMatch=i, |
| ) |
| ranges.append(addr_range) |
| cls._addr_ranges[hnf] = (ranges, numa_bit) |
| |
| @classmethod |
| def getAddrRanges(cls, hnf_idx): |
| assert len(cls._addr_ranges) != 0 |
| return cls._addr_ranges[hnf_idx] |
| |
| # The CHI controller can be a child of this object or another if |
| # 'parent' if specified |
| def __init__(self, hnf_idx, ruby_system, llcache_type, parent): |
| super(CHI_HNF, self).__init__(ruby_system) |
| |
| addr_ranges, intlvHighBit = self.getAddrRanges(hnf_idx) |
| # All ranges should have the same interleaving |
| assert len(addr_ranges) >= 1 |
| |
| ll_cache = llcache_type(start_index_bit=intlvHighBit + 1) |
| self._cntrl = CHI_HNFController( |
| ruby_system, ll_cache, NULL, addr_ranges |
| ) |
| |
| if parent == None: |
| self.cntrl = self._cntrl |
| else: |
| parent.cntrl = self._cntrl |
| |
| self.connectController(self._cntrl) |
| |
| def getAllControllers(self): |
| return [self._cntrl] |
| |
| def getNetworkSideControllers(self): |
| return [self._cntrl] |
| |
| |
| class CHI_MN(CHI_Node): |
| """ |
| Encapsulates a Misc Node controller. |
| """ |
| |
| class NoC_Params(CHI_Node.NoC_Params): |
| """HNFs may also define the 'pairing' parameter to allow pairing""" |
| |
| pairing = None |
| |
| # The CHI controller can be a child of this object or another if |
| # 'parent' if specified |
| def __init__(self, ruby_system, l1d_caches, early_nonsync_comp=False): |
| super(CHI_MN, self).__init__(ruby_system) |
| |
| # MiscNode has internal address range starting at 0 |
| addr_range = AddrRange(0, size="1kB") |
| |
| self._cntrl = CHI_MNController( |
| ruby_system, addr_range, l1d_caches, early_nonsync_comp |
| ) |
| |
| self.cntrl = self._cntrl |
| |
| self.connectController(self._cntrl) |
| |
| def connectController(self, cntrl): |
| CHI_Node.connectController(self, cntrl) |
| |
| def getAllControllers(self): |
| return [self._cntrl] |
| |
| def getNetworkSideControllers(self): |
| return [self._cntrl] |
| |
| |
| class CHI_SNF_Base(CHI_Node): |
| """ |
| Creates CHI node controllers for the memory controllers |
| """ |
| |
| # The CHI controller can be a child of this object or another if |
| # 'parent' if specified |
| def __init__(self, ruby_system, parent): |
| super(CHI_SNF_Base, self).__init__(ruby_system) |
| |
| self._cntrl = Memory_Controller( |
| version=Versions.getVersion(Memory_Controller), |
| ruby_system=ruby_system, |
| triggerQueue=TriggerMessageBuffer(), |
| responseFromMemory=MemCtrlMessageBuffer(), |
| requestToMemory=MemCtrlMessageBuffer(), |
| reqRdy=TriggerMessageBuffer(), |
| transitions_per_cycle=1024, |
| ) |
| |
| # The Memory_Controller implementation deallocates the TBE for |
| # write requests when they are queue up to memory. The size of this |
| # buffer must be limited to prevent unlimited outstanding writes. |
| self._cntrl.requestToMemory.buffer_size = ( |
| int(self._cntrl.to_memory_controller_latency) + 1 |
| ) |
| |
| self.connectController(self._cntrl) |
| |
| if parent: |
| parent.cntrl = self._cntrl |
| else: |
| self.cntrl = self._cntrl |
| |
| def getAllControllers(self): |
| return [self._cntrl] |
| |
| def getNetworkSideControllers(self): |
| return [self._cntrl] |
| |
| def getMemRange(self, mem_ctrl): |
| # TODO need some kind of transparent API for |
| # MemCtrl+DRAM vs SimpleMemory |
| if hasattr(mem_ctrl, "range"): |
| return mem_ctrl.range |
| else: |
| return mem_ctrl.dram.range |
| |
| |
| class CHI_SNF_BootMem(CHI_SNF_Base): |
| """ |
| Create the SNF for the boot memory |
| """ |
| |
| def __init__(self, ruby_system, parent, bootmem): |
| super(CHI_SNF_BootMem, self).__init__(ruby_system, parent) |
| self._cntrl.memory_out_port = bootmem.port |
| self._cntrl.addr_ranges = self.getMemRange(bootmem) |
| |
| |
| class CHI_SNF_MainMem(CHI_SNF_Base): |
| """ |
| Create the SNF for a list main memory controllers |
| """ |
| |
| def __init__(self, ruby_system, parent, mem_ctrl=None): |
| super(CHI_SNF_MainMem, self).__init__(ruby_system, parent) |
| if mem_ctrl: |
| self._cntrl.memory_out_port = mem_ctrl.port |
| self._cntrl.addr_ranges = self.getMemRange(mem_ctrl) |
| # else bind ports and range later |
| |
| |
| class CHI_RNI_Base(CHI_Node): |
| """ |
| Request node without cache / DMA |
| """ |
| |
| # The CHI controller can be a child of this object or another if |
| # 'parent' if specified |
| def __init__(self, ruby_system, parent): |
| super(CHI_RNI_Base, self).__init__(ruby_system) |
| |
| self._sequencer = RubySequencer( |
| version=Versions.getSeqId(), |
| ruby_system=ruby_system, |
| clk_domain=ruby_system.clk_domain, |
| ) |
| self._cntrl = CHI_DMAController(ruby_system, self._sequencer) |
| |
| if parent: |
| parent.cntrl = self._cntrl |
| else: |
| self.cntrl = self._cntrl |
| |
| self.connectController(self._cntrl) |
| |
| def getAllControllers(self): |
| return [self._cntrl] |
| |
| def getNetworkSideControllers(self): |
| return [self._cntrl] |
| |
| |
| class CHI_RNI_DMA(CHI_RNI_Base): |
| """ |
| DMA controller wiredup to a given dma port |
| """ |
| |
| def __init__(self, ruby_system, dma_port, parent): |
| super(CHI_RNI_DMA, self).__init__(ruby_system, parent) |
| assert dma_port != None |
| self._sequencer.in_ports = dma_port |
| |
| |
| class CHI_RNI_IO(CHI_RNI_Base): |
| """ |
| DMA controller wiredup to ruby_system IO port |
| """ |
| |
| def __init__(self, ruby_system, parent): |
| super(CHI_RNI_IO, self).__init__(ruby_system, parent) |
| ruby_system._io_port = self._sequencer |
