#
# No ranges
#

config HEX_NO_RANGE
    hex "hex no range"

config INT_NO_RANGE
    int "int no range"

#
# Disabled ranges
#

config HEX_ALL_RANGES_DISABLED
    hex "hex all ranges disabled"
    range 0x10 0x20 if n
    range 0x30 0x40 if n

config INT_ALL_RANGES_DISABLED
    int "int all ranges disabled"
    range 10 20 if n
    range 30 40 if n

#
# Ranges with defaults
#

# hex

config HEX_RANGE_10_20_LOW_DEFAULT
    hex "int range 10-20 low default"
    range 0x10 0x20
    default 0x9

config HEX_RANGE_10_20_HIGH_DEFAULT
    hex "int range 10-20 high default"
    range 0x10 0x20
    default 0x21

config HEX_RANGE_10_20_OK_DEFAULT
    hex "int range 10-20 ok default"
    range 0x10 0x20
    default 0x15

config HEX_RANGE_10_20_OK_DEFAULT_ALTERNATE
    hex "int range 10-20 ok default alternate"
    range 0x10 0x20
    default 15

# int

config INT_RANGE_10_20_LOW_DEFAULT
    int "int range 10-20 low default"
    range 10 20
    default 9

config INT_RANGE_10_20_HIGH_DEFAULT
    int "int range 10-20 high default"
    range 10 20
    default 21

config INT_RANGE_10_20_OK_DEFAULT
    int "int range 10-20 ok default"
    range 10 20
    default 15

#
# Ranges with no defaults (should default to low end of range if > 0)
#

config HEX_RANGE_10_20
    hex "hex range 10-20"    
    range 0x10 0x20

config HEX_RANGE_0_10
    hex "hex range 0-10"
    range 0x0 0x10

config INT_RANGE_10_20
    int "int range 10-20"    
    range 10 20

config INT_RANGE_0_10
    int "int range 0-10"
    range 0 10

config INT_RANGE_NEG_10_10
    int "int range -10-10"
    range -10 10

#
# Dependent ranges
#

config HEX_40
    hex
    default 40

config HEX_RANGE_10_40_DEPENDENT
    hex "hex range 10-40 dependent"
    range HEX_RANGE_10_20 HEX_40

config INT_40
    int
    default 40

config INT_RANGE_10_40_DEPENDENT
    int "int range 10-40 dependent"
    range INT_RANGE_10_20 INT_40

#
# Ranges on symbols defined in multiple locations
#

if n
config INACTIVE_RANGE
    range 0 1
endif

config INACTIVE_RANGE
    int
    # Default will apply and should not get clamped,
    # because the range does not apply
    default 2

config ACTIVE_RANGE
    range 0 1

config ACTIVE_RANGE
    int
    # Default will apply and should be clamped to 1
    default 2