blob: 064fe4e925dcbcd12ddf73610e2a80b1f50d8409 [file] [log] [blame]
/*
* Copyright (c) 2011-2013 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Copyright (c) 2006 The Regents of The University of Michigan
* Copyright (c) 2015 The University of Bologna
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* @file
* Declaration of the SerialLink Class, modeling Hybrid-Memory-Cube's serial
* interface.
*/
#ifndef __MEM_SERIAL_LINK_HH__
#define __MEM_SERIAL_LINK_HH__
#include <deque>
#include "base/types.hh"
#include "mem/port.hh"
#include "params/SerialLink.hh"
#include "sim/clocked_object.hh"
namespace gem5
{
/**
* SerialLink is a simple variation of the Bridge class, with the ability to
* account for the latency of packet serialization. We assume that the
* serializer component at the transmitter side does not need to receive the
* whole packet to start the serialization. But the deserializer waits for the
* complete packet to check its integrity first.
*/
class SerialLink : public ClockedObject
{
protected:
/**
* A deferred packet stores a packet along with its scheduled
* transmission time
*/
class DeferredPacket
{
public:
const Tick tick;
const PacketPtr pkt;
DeferredPacket(PacketPtr _pkt, Tick _tick) : tick(_tick), pkt(_pkt)
{ }
};
// Forward declaration to allow the CPU-side port to have a pointer
class SerialLinkRequestPort;
/**
* The port on the side that receives requests and sends
* responses. The CPU-side port has a set of address ranges that it
* is responsible for. The CPU-side port also has a buffer for the
* responses not yet sent.
*/
class SerialLinkResponsePort : public ResponsePort
{
private:
/** The serial_link to which this port belongs. */
SerialLink& serial_link;
/**
* Request port on the other side of the serial_link.
*/
SerialLinkRequestPort& mem_side_port;
/** Minimum request delay though this serial_link. */
const Cycles delay;
/** Address ranges to pass through the serial_link */
const AddrRangeList ranges;
/**
* Response packet queue. Response packets are held in this
* queue for a specified delay to model the processing delay
* of the serial_link. We use a deque as we need to iterate over
* the items for functional accesses.
*/
std::deque<DeferredPacket> transmitList;
/** Counter to track the outstanding responses. */
unsigned int outstandingResponses;
/** If we should send a retry when space becomes available. */
bool retryReq;
/** Max queue size for reserved responses. */
unsigned int respQueueLimit;
/**
* Is this side blocked from accepting new response packets.
*
* @return true if the reserved space has reached the set limit
*/
bool respQueueFull() const;
/**
* Handle send event, scheduled when the packet at the head of
* the response queue is ready to transmit (for timing
* accesses only).
*/
void trySendTiming();
/** Send event for the response queue. */
EventFunctionWrapper sendEvent;
public:
/**
* Constructor for the SerialLinkResponsePort.
*
* @param _name the port name including the owner
* @param _serial_link the structural owner
* @param _mem_side_port the memory-side port on the other side of the
* serial_link
* @param _delay the delay in cycles from receiving to sending
* @param _resp_limit the size of the response queue
* @param _ranges a number of address ranges to forward
*/
SerialLinkResponsePort(const std::string& _name, SerialLink&
_serial_link, SerialLinkRequestPort& _mem_side_port,
Cycles _delay, int _resp_limit, const
std::vector<AddrRange>& _ranges);
/**
* Queue a response packet to be sent out later and also schedule
* a send if necessary.
*
* @param pkt a response to send out after a delay
* @param when tick when response packet should be sent
*/
void schedTimingResp(PacketPtr pkt, Tick when);
/**
* Retry any stalled request that we have failed to accept at
* an earlier point in time. This call will do nothing if no
* request is waiting.
*/
void retryStalledReq();
protected:
/** When receiving a timing request from the peer port,
pass it to the serial_link. */
bool recvTimingReq(PacketPtr pkt);
/** When receiving a retry request from the peer port,
pass it to the serial_link. */
void recvRespRetry();
/** When receiving a Atomic requestfrom the peer port,
pass it to the serial_link. */
Tick recvAtomic(PacketPtr pkt);
/** When receiving a Functional request from the peer port,
pass it to the serial_link. */
void recvFunctional(PacketPtr pkt);
/** When receiving a address range request the peer port,
pass it to the serial_link. */
AddrRangeList getAddrRanges() const;
};
/**
* Port on the side that forwards requests and receives
* responses. The memory-side port has a buffer for the requests not
* yet sent.
*/
class SerialLinkRequestPort : public RequestPort
{
private:
/** The serial_link to which this port belongs. */
SerialLink& serial_link;
/**
* The response (CPU-side port) port on the other side of
* the serial_link.
*/
SerialLinkResponsePort& cpu_side_port;
/** Minimum delay though this serial_link. */
const Cycles delay;
/**
* Request packet queue. Request packets are held in this
* queue for a specified delay to model the processing delay
* of the serial_link. We use a deque as we need to iterate over
* the items for functional accesses.
*/
std::deque<DeferredPacket> transmitList;
/** Max queue size for request packets */
const unsigned int reqQueueLimit;
/**
* Handle send event, scheduled when the packet at the head of
* the outbound queue is ready to transmit (for timing
* accesses only).
*/
void trySendTiming();
/** Send event for the request queue. */
EventFunctionWrapper sendEvent;
public:
/**
* Constructor for the SerialLinkRequestPort.
*
* @param _name the port name including the owner
* @param _serial_link the structural owner
* @param _cpu_side_port the CPU-side port on the other
* side of the serial_link
* @param _delay the delay in cycles from receiving to sending
* @param _req_limit the size of the request queue
*/
SerialLinkRequestPort(const std::string& _name, SerialLink&
_serial_link, SerialLinkResponsePort& _cpu_side_port,
Cycles _delay, int _req_limit);
/**
* Is this side blocked from accepting new request packets.
*
* @return true if the occupied space has reached the set limit
*/
bool reqQueueFull() const;
/**
* Queue a request packet to be sent out later and also schedule
* a send if necessary.
*
* @param pkt a request to send out after a delay
* @param when tick when response packet should be sent
*/
void schedTimingReq(PacketPtr pkt, Tick when);
/**
* Check a functional request against the packets in our
* request queue.
*
* @param pkt packet to check against
*
* @return true if we find a match
*/
bool trySatisfyFunctional(PacketPtr pkt);
protected:
/** When receiving a timing request from the peer port,
pass it to the serial_link. */
bool recvTimingResp(PacketPtr pkt);
/** When receiving a retry request from the peer port,
pass it to the serial_link. */
void recvReqRetry();
};
/** Response port of the serial_link. */
SerialLinkResponsePort cpu_side_port;
/** Request port of the serial_link. */
SerialLinkRequestPort mem_side_port;
/** Number of parallel lanes in this serial link */
unsigned num_lanes;
/** Speed of each link (Gb/s) in this serial link */
uint64_t link_speed;
public:
Port &getPort(const std::string &if_name,
PortID idx=InvalidPortID);
virtual void init();
typedef SerialLinkParams Params;
SerialLink(const SerialLinkParams &p);
};
} // namespace gem5
#endif //__MEM_SERIAL_LINK_HH__