blob: 3be67bec4c255682dd2a6a3bc8ce4fdc0542650f [file] [log] [blame]
/*
* Copyright (c) 2012-2014,2017-2018 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Copyright (c) 2004-2006 The Regents of The University of Michigan
* Copyright (c) 2013 Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Kevin Lim
* Korey Sewell
*/
#ifndef __CPU_O3_LSQ_UNIT_HH__
#define __CPU_O3_LSQ_UNIT_HH__
#include <algorithm>
#include <cstring>
#include <map>
#include <queue>
#include "arch/generic/debugfaults.hh"
#include "arch/isa_traits.hh"
#include "arch/locked_mem.hh"
#include "arch/mmapped_ipr.hh"
#include "config/the_isa.hh"
#include "cpu/inst_seq.hh"
#include "cpu/timebuf.hh"
#include "debug/LSQUnit.hh"
#include "mem/packet.hh"
#include "mem/port.hh"
struct DerivO3CPUParams;
#include "base/circular_queue.hh"
/**
* Class that implements the actual LQ and SQ for each specific
* thread. Both are circular queues; load entries are freed upon
* committing, while store entries are freed once they writeback. The
* LSQUnit tracks if there are memory ordering violations, and also
* detects partial load to store forwarding cases (a store only has
* part of a load's data) that requires the load to wait until the
* store writes back. In the former case it holds onto the instruction
* until the dependence unit looks at it, and in the latter it stalls
* the LSQ until the store writes back. At that point the load is
* replayed.
*/
template <class Impl>
class LSQUnit
{
public:
typedef typename Impl::O3CPU O3CPU;
typedef typename Impl::DynInstPtr DynInstPtr;
typedef typename Impl::CPUPol::IEW IEW;
typedef typename Impl::CPUPol::LSQ LSQ;
typedef typename Impl::CPUPol::IssueStruct IssueStruct;
using LSQSenderState = typename LSQ::LSQSenderState;
using LSQRequest = typename Impl::CPUPol::LSQ::LSQRequest;
private:
class LSQEntry
{
private:
/** The instruction. */
DynInstPtr inst;
/** The request. */
LSQRequest* req;
/** The size of the operation. */
uint8_t _size;
/** Valid entry. */
bool _valid;
public:
/** Constructs an empty store queue entry. */
LSQEntry()
: inst(nullptr), req(nullptr), _size(0), _valid(false)
{
}
~LSQEntry()
{
inst = nullptr;
if (req != nullptr) {
req->freeLSQEntry();
req = nullptr;
}
}
void
clear()
{
inst = nullptr;
if (req != nullptr) {
req->freeLSQEntry();
}
req = nullptr;
_valid = false;
_size = 0;
}
void
set(const DynInstPtr& inst)
{
assert(!_valid);
this->inst = inst;
_valid = true;
_size = 0;
}
LSQRequest* request() { return req; }
void setRequest(LSQRequest* r) { req = r; }
bool hasRequest() { return req != nullptr; }
/** Member accessors. */
/** @{ */
bool valid() const { return _valid; }
uint8_t& size() { return _size; }
const uint8_t& size() const { return _size; }
const DynInstPtr& instruction() const { return inst; }
/** @} */
};
class SQEntry : public LSQEntry
{
private:
/** The store data. */
char _data[64]; // TODO: 64 should become a parameter
/** Whether or not the store can writeback. */
bool _canWB;
/** Whether or not the store is committed. */
bool _committed;
/** Whether or not the store is completed. */
bool _completed;
/** Does this request write all zeros and thus doesn't
* have any data attached to it. Used for cache block zero
* style instructs (ARM DC ZVA; ALPHA WH64)
*/
bool _isAllZeros;
public:
static constexpr size_t DataSize = sizeof(_data);
/** Constructs an empty store queue entry. */
SQEntry()
: _canWB(false), _committed(false), _completed(false),
_isAllZeros(false)
{
std::memset(_data, 0, DataSize);
}
~SQEntry()
{
}
void
set(const DynInstPtr& inst)
{
LSQEntry::set(inst);
}
void
clear()
{
LSQEntry::clear();
_canWB = _completed = _committed = _isAllZeros = false;
}
/** Member accessors. */
/** @{ */
bool& canWB() { return _canWB; }
const bool& canWB() const { return _canWB; }
bool& completed() { return _completed; }
const bool& completed() const { return _completed; }
bool& committed() { return _committed; }
const bool& committed() const { return _committed; }
bool& isAllZeros() { return _isAllZeros; }
const bool& isAllZeros() const { return _isAllZeros; }
char* data() { return _data; }
const char* data() const { return _data; }
/** @} */
};
using LQEntry = LSQEntry;
public:
using LoadQueue = CircularQueue<LQEntry>;
using StoreQueue = CircularQueue<SQEntry>;
public:
/** Constructs an LSQ unit. init() must be called prior to use. */
LSQUnit(uint32_t lqEntries, uint32_t sqEntries);
/** We cannot copy LSQUnit because it has stats for which copy
* contructor is deleted explicitly. However, STL vector requires
* a valid copy constructor for the base type at compile time.
*/
LSQUnit(const LSQUnit &l) { panic("LSQUnit is not copy-able"); }
/** Initializes the LSQ unit with the specified number of entries. */
void init(O3CPU *cpu_ptr, IEW *iew_ptr, DerivO3CPUParams *params,
LSQ *lsq_ptr, unsigned id);
/** Returns the name of the LSQ unit. */
std::string name() const;
/** Registers statistics. */
void regStats();
/** Sets the pointer to the dcache port. */
void setDcachePort(MasterPort *dcache_port);
/** Perform sanity checks after a drain. */
void drainSanityCheck() const;
/** Takes over from another CPU's thread. */
void takeOverFrom();
/** Inserts an instruction. */
void insert(const DynInstPtr &inst);
/** Inserts a load instruction. */
void insertLoad(const DynInstPtr &load_inst);
/** Inserts a store instruction. */
void insertStore(const DynInstPtr &store_inst);
/** Check for ordering violations in the LSQ. For a store squash if we
* ever find a conflicting load. For a load, only squash if we
* an external snoop invalidate has been seen for that load address
* @param load_idx index to start checking at
* @param inst the instruction to check
*/
Fault checkViolations(typename LoadQueue::iterator& loadIt,
const DynInstPtr& inst);
/** Check if an incoming invalidate hits in the lsq on a load
* that might have issued out of order wrt another load beacuse
* of the intermediate invalidate.
*/
void checkSnoop(PacketPtr pkt);
/** Executes a load instruction. */
Fault executeLoad(const DynInstPtr &inst);
Fault executeLoad(int lq_idx) { panic("Not implemented"); return NoFault; }
/** Executes a store instruction. */
Fault executeStore(const DynInstPtr &inst);
/** Commits the head load. */
void commitLoad();
/** Commits loads older than a specific sequence number. */
void commitLoads(InstSeqNum &youngest_inst);
/** Commits stores older than a specific sequence number. */
void commitStores(InstSeqNum &youngest_inst);
/** Writes back stores. */
void writebackStores();
/** Completes the data access that has been returned from the
* memory system. */
void completeDataAccess(PacketPtr pkt);
/** Squashes all instructions younger than a specific sequence number. */
void squash(const InstSeqNum &squashed_num);
/** Returns if there is a memory ordering violation. Value is reset upon
* call to getMemDepViolator().
*/
bool violation() { return memDepViolator; }
/** Returns the memory ordering violator. */
DynInstPtr getMemDepViolator();
/** Returns the number of free LQ entries. */
unsigned numFreeLoadEntries();
/** Returns the number of free SQ entries. */
unsigned numFreeStoreEntries();
/** Returns the number of loads in the LQ. */
int numLoads() { return loads; }
/** Returns the number of stores in the SQ. */
int numStores() { return stores; }
/** Returns if either the LQ or SQ is full. */
bool isFull() { return lqFull() || sqFull(); }
/** Returns if both the LQ and SQ are empty. */
bool isEmpty() const { return lqEmpty() && sqEmpty(); }
/** Returns if the LQ is full. */
bool lqFull() { return loadQueue.full(); }
/** Returns if the SQ is full. */
bool sqFull() { return storeQueue.full(); }
/** Returns if the LQ is empty. */
bool lqEmpty() const { return loads == 0; }
/** Returns if the SQ is empty. */
bool sqEmpty() const { return stores == 0; }
/** Returns the number of instructions in the LSQ. */
unsigned getCount() { return loads + stores; }
/** Returns if there are any stores to writeback. */
bool hasStoresToWB() { return storesToWB; }
/** Returns the number of stores to writeback. */
int numStoresToWB() { return storesToWB; }
/** Returns if the LSQ unit will writeback on this cycle. */
bool
willWB()
{
return storeWBIt.dereferenceable() &&
storeWBIt->valid() &&
storeWBIt->canWB() &&
!storeWBIt->completed() &&
!isStoreBlocked;
}
/** Handles doing the retry. */
void recvRetry();
unsigned int cacheLineSize();
private:
/** Reset the LSQ state */
void resetState();
/** Writes back the instruction, sending it to IEW. */
void writeback(const DynInstPtr &inst, PacketPtr pkt);
/** Try to finish a previously blocked write back attempt */
void writebackBlockedStore();
/** Completes the store at the specified index. */
void completeStore(typename StoreQueue::iterator store_idx);
/** Handles completing the send of a store to memory. */
void storePostSend();
public:
/** Attempts to send a packet to the cache.
* Check if there are ports available. Return true if
* there are, false if there are not.
*/
bool trySendPacket(bool isLoad, PacketPtr data_pkt);
/** Debugging function to dump instructions in the LSQ. */
void dumpInsts() const;
/** Schedule event for the cpu. */
void schedule(Event& ev, Tick when) { cpu->schedule(ev, when); }
BaseTLB* dTLB() { return cpu->dtb; }
private:
/** Pointer to the CPU. */
O3CPU *cpu;
/** Pointer to the IEW stage. */
IEW *iewStage;
/** Pointer to the LSQ. */
LSQ *lsq;
/** Pointer to the dcache port. Used only for sending. */
MasterPort *dcachePort;
/** Particularisation of the LSQSenderState to the LQ. */
class LQSenderState : public LSQSenderState
{
using LSQSenderState::alive;
public:
LQSenderState(typename LoadQueue::iterator idx_)
: LSQSenderState(idx_->request(), true), idx(idx_) { }
/** The LQ index of the instruction. */
typename LoadQueue::iterator idx;
//virtual LSQRequest* request() { return idx->request(); }
virtual void
complete()
{
//if (alive())
// idx->request()->senderState(nullptr);
}
};
/** Particularisation of the LSQSenderState to the SQ. */
class SQSenderState : public LSQSenderState
{
using LSQSenderState::alive;
public:
SQSenderState(typename StoreQueue::iterator idx_)
: LSQSenderState(idx_->request(), false), idx(idx_) { }
/** The SQ index of the instruction. */
typename StoreQueue::iterator idx;
//virtual LSQRequest* request() { return idx->request(); }
virtual void
complete()
{
//if (alive())
// idx->request()->senderState(nullptr);
}
};
/** Writeback event, specifically for when stores forward data to loads. */
class WritebackEvent : public Event
{
public:
/** Constructs a writeback event. */
WritebackEvent(const DynInstPtr &_inst, PacketPtr pkt,
LSQUnit *lsq_ptr);
/** Processes the writeback event. */
void process();
/** Returns the description of this event. */
const char *description() const;
private:
/** Instruction whose results are being written back. */
DynInstPtr inst;
/** The packet that would have been sent to memory. */
PacketPtr pkt;
/** The pointer to the LSQ unit that issued the store. */
LSQUnit<Impl> *lsqPtr;
};
public:
/**
* Handles writing back and completing the load or store that has
* returned from memory.
*
* @param pkt Response packet from the memory sub-system
*/
bool recvTimingResp(PacketPtr pkt);
private:
/** The LSQUnit thread id. */
ThreadID lsqID;
public:
/** The store queue. */
CircularQueue<SQEntry> storeQueue;
/** The load queue. */
LoadQueue loadQueue;
private:
/** The number of places to shift addresses in the LSQ before checking
* for dependency violations
*/
unsigned depCheckShift;
/** Should loads be checked for dependency issues */
bool checkLoads;
/** The number of load instructions in the LQ. */
int loads;
/** The number of store instructions in the SQ. */
int stores;
/** The number of store instructions in the SQ waiting to writeback. */
int storesToWB;
/** The index of the first instruction that may be ready to be
* written back, and has not yet been written back.
*/
typename StoreQueue::iterator storeWBIt;
/** Address Mask for a cache block (e.g. ~(cache_block_size-1)) */
Addr cacheBlockMask;
/** Wire to read information from the issue stage time queue. */
typename TimeBuffer<IssueStruct>::wire fromIssue;
/** Whether or not the LSQ is stalled. */
bool stalled;
/** The store that causes the stall due to partial store to load
* forwarding.
*/
InstSeqNum stallingStoreIsn;
/** The index of the above store. */
int stallingLoadIdx;
/** The packet that needs to be retried. */
PacketPtr retryPkt;
/** Whehter or not a store is blocked due to the memory system. */
bool isStoreBlocked;
/** Whether or not a store is in flight. */
bool storeInFlight;
/** The oldest load that caused a memory ordering violation. */
DynInstPtr memDepViolator;
/** Whether or not there is a packet that couldn't be sent because of
* a lack of cache ports. */
bool hasPendingRequest;
/** The packet that is pending free cache ports. */
LSQRequest* pendingRequest;
/** Flag for memory model. */
bool needsTSO;
// Will also need how many read/write ports the Dcache has. Or keep track
// of that in stage that is one level up, and only call executeLoad/Store
// the appropriate number of times.
/** Total number of loads forwaded from LSQ stores. */
Stats::Scalar lsqForwLoads;
/** Total number of loads ignored due to invalid addresses. */
Stats::Scalar invAddrLoads;
/** Total number of squashed loads. */
Stats::Scalar lsqSquashedLoads;
/** Total number of responses from the memory system that are
* ignored due to the instruction already being squashed. */
Stats::Scalar lsqIgnoredResponses;
/** Tota number of memory ordering violations. */
Stats::Scalar lsqMemOrderViolation;
/** Total number of squashed stores. */
Stats::Scalar lsqSquashedStores;
/** Total number of software prefetches ignored due to invalid addresses. */
Stats::Scalar invAddrSwpfs;
/** Ready loads blocked due to partial store-forwarding. */
Stats::Scalar lsqBlockedLoads;
/** Number of loads that were rescheduled. */
Stats::Scalar lsqRescheduledLoads;
/** Number of times the LSQ is blocked due to the cache. */
Stats::Scalar lsqCacheBlocked;
public:
/** Executes the load at the given index. */
Fault read(LSQRequest *req, int load_idx);
/** Executes the store at the given index. */
Fault write(LSQRequest *req, uint8_t *data, int store_idx);
/** Returns the index of the head load instruction. */
int getLoadHead() { return loadQueue.head(); }
/** Returns the sequence number of the head load instruction. */
InstSeqNum
getLoadHeadSeqNum()
{
return loadQueue.front().valid()
? loadQueue.front().instruction()->seqNum
: 0;
}
/** Returns the index of the head store instruction. */
int getStoreHead() { return storeQueue.head(); }
/** Returns the sequence number of the head store instruction. */
InstSeqNum
getStoreHeadSeqNum()
{
return storeQueue.front().valid()
? storeQueue.front().instruction()->seqNum
: 0;
}
/** Returns whether or not the LSQ unit is stalled. */
bool isStalled() { return stalled; }
public:
typedef typename CircularQueue<LQEntry>::iterator LQIterator;
typedef typename CircularQueue<SQEntry>::iterator SQIterator;
typedef CircularQueue<LQEntry> LQueue;
typedef CircularQueue<SQEntry> SQueue;
};
template <class Impl>
Fault
LSQUnit<Impl>::read(LSQRequest *req, int load_idx)
{
LQEntry& load_req = loadQueue[load_idx];
const DynInstPtr& load_inst = load_req.instruction();
load_req.setRequest(req);
assert(load_inst);
assert(!load_inst->isExecuted());
// Make sure this isn't a strictly ordered load
// A bit of a hackish way to get strictly ordered accesses to work
// only if they're at the head of the LSQ and are ready to commit
// (at the head of the ROB too).
if (req->mainRequest()->isStrictlyOrdered() &&
(load_idx != loadQueue.head() || !load_inst->isAtCommit())) {
// Tell IQ/mem dep unit that this instruction will need to be
// rescheduled eventually
iewStage->rescheduleMemInst(load_inst);
load_inst->clearIssued();
load_inst->effAddrValid(false);
++lsqRescheduledLoads;
DPRINTF(LSQUnit, "Strictly ordered load [sn:%lli] PC %s\n",
load_inst->seqNum, load_inst->pcState());
// Must delete request now that it wasn't handed off to
// memory. This is quite ugly. @todo: Figure out the proper
// place to really handle request deletes.
load_req.setRequest(nullptr);
req->discard();
return std::make_shared<GenericISA::M5PanicFault>(
"Strictly ordered load [sn:%llx] PC %s\n",
load_inst->seqNum, load_inst->pcState());
}
DPRINTF(LSQUnit, "Read called, load idx: %i, store idx: %i, "
"storeHead: %i addr: %#x%s\n",
load_idx - 1, load_inst->sqIt._idx, storeQueue.head() - 1,
req->mainRequest()->getPaddr(), req->isSplit() ? " split" : "");
if (req->mainRequest()->isLLSC()) {
// Disable recording the result temporarily. Writing to misc
// regs normally updates the result, but this is not the
// desired behavior when handling store conditionals.
load_inst->recordResult(false);
TheISA::handleLockedRead(load_inst.get(), req->mainRequest());
load_inst->recordResult(true);
}
if (req->mainRequest()->isMmappedIpr()) {
assert(!load_inst->memData);
load_inst->memData = new uint8_t[64];
ThreadContext *thread = cpu->tcBase(lsqID);
PacketPtr main_pkt = new Packet(req->mainRequest(), MemCmd::ReadReq);
Cycles delay = req->handleIprRead(thread, main_pkt);
WritebackEvent *wb = new WritebackEvent(load_inst, main_pkt, this);
cpu->schedule(wb, cpu->clockEdge(delay));
return NoFault;
}
// Check the SQ for any previous stores that might lead to forwarding
auto store_it = load_inst->sqIt;
assert (store_it >= storeWBIt);
// End once we've reached the top of the LSQ
while (store_it != storeWBIt) {
// Move the index to one younger
store_it--;
assert(store_it->valid());
assert(store_it->instruction()->seqNum < load_inst->seqNum);
int store_size = store_it->size();
// Cache maintenance instructions go down via the store
// path but they carry no data and they shouldn't be
// considered for forwarding
if (store_size != 0 && !store_it->instruction()->strictlyOrdered() &&
!(store_it->request()->mainRequest() &&
store_it->request()->mainRequest()->isCacheMaintenance())) {
assert(store_it->instruction()->effAddrValid());
// Check if the store data is within the lower and upper bounds of
// addresses that the request needs.
auto req_s = req->mainRequest()->getVaddr();
auto req_e = req_s + req->mainRequest()->getSize();
auto st_s = store_it->instruction()->effAddr;
auto st_e = st_s + store_size;
bool store_has_lower_limit = req_s >= st_s;
bool store_has_upper_limit = req_e <= st_e;
bool lower_load_has_store_part = req_s < st_e;
bool upper_load_has_store_part = req_e > st_s;
// If the store entry is not atomic (atomic does not have valid
// data), the store has all of the data needed, and
// the load is not LLSC, then
// we can forward data from the store to the load
if (!store_it->instruction()->isAtomic() &&
store_has_lower_limit && store_has_upper_limit &&
!req->mainRequest()->isLLSC()) {
// Get shift amount for offset into the store's data.
int shift_amt = req->mainRequest()->getVaddr() -
store_it->instruction()->effAddr;
// Allocate memory if this is the first time a load is issued.
if (!load_inst->memData) {
load_inst->memData =
new uint8_t[req->mainRequest()->getSize()];
}
if (store_it->isAllZeros())
memset(load_inst->memData, 0,
req->mainRequest()->getSize());
else
memcpy(load_inst->memData,
store_it->data() + shift_amt,
req->mainRequest()->getSize());
DPRINTF(LSQUnit, "Forwarding from store idx %i to load to "
"addr %#x\n", store_it._idx,
req->mainRequest()->getVaddr());
PacketPtr data_pkt = new Packet(req->mainRequest(),
MemCmd::ReadReq);
data_pkt->dataStatic(load_inst->memData);
if (req->isAnyOutstandingRequest()) {
assert(req->_numOutstandingPackets > 0);
// There are memory requests packets in flight already.
// This may happen if the store was not complete the
// first time this load got executed. Signal the senderSate
// that response packets should be discarded.
req->discardSenderState();
}
WritebackEvent *wb = new WritebackEvent(load_inst, data_pkt,
this);
// We'll say this has a 1 cycle load-store forwarding latency
// for now.
// @todo: Need to make this a parameter.
cpu->schedule(wb, curTick());
// Don't need to do anything special for split loads.
++lsqForwLoads;
return NoFault;
} else if (
// This is the partial store-load forwarding case where a store
// has only part of the load's data and the load isn't LLSC
(!req->mainRequest()->isLLSC() &&
((store_has_lower_limit && lower_load_has_store_part) ||
(store_has_upper_limit && upper_load_has_store_part) ||
(lower_load_has_store_part && upper_load_has_store_part))) ||
// The load is LLSC, and the store has all or part of the
// load's data
(req->mainRequest()->isLLSC() &&
((store_has_lower_limit || upper_load_has_store_part) &&
(store_has_upper_limit || lower_load_has_store_part))) ||
// The store entry is atomic and has all or part of the load's
// data
(store_it->instruction()->isAtomic() &&
((store_has_lower_limit || upper_load_has_store_part) &&
(store_has_upper_limit || lower_load_has_store_part)))) {
// If it's already been written back, then don't worry about
// stalling on it.
if (store_it->completed()) {
panic("Should not check one of these");
continue;
}
// Must stall load and force it to retry, so long as it's the
// oldest load that needs to do so.
if (!stalled ||
(stalled &&
load_inst->seqNum <
loadQueue[stallingLoadIdx].instruction()->seqNum)) {
stalled = true;
stallingStoreIsn = store_it->instruction()->seqNum;
stallingLoadIdx = load_idx;
}
// Tell IQ/mem dep unit that this instruction will need to be
// rescheduled eventually
iewStage->rescheduleMemInst(load_inst);
load_inst->clearIssued();
load_inst->effAddrValid(false);
++lsqRescheduledLoads;
// Do not generate a writeback event as this instruction is not
// complete.
DPRINTF(LSQUnit, "Load-store forwarding mis-match. "
"Store idx %i to load addr %#x\n",
store_it._idx, req->mainRequest()->getVaddr());
// Must discard the request.
req->discard();
load_req.setRequest(nullptr);
return NoFault;
}
}
}
// If there's no forwarding case, then go access memory
DPRINTF(LSQUnit, "Doing memory access for inst [sn:%lli] PC %s\n",
load_inst->seqNum, load_inst->pcState());
// Allocate memory if this is the first time a load is issued.
if (!load_inst->memData) {
load_inst->memData = new uint8_t[req->mainRequest()->getSize()];
}
// For now, load throughput is constrained by the number of
// load FUs only, and loads do not consume a cache port (only
// stores do).
// @todo We should account for cache port contention
// and arbitrate between loads and stores.
// if we the cache is not blocked, do cache access
if (req->senderState() == nullptr) {
LQSenderState *state = new LQSenderState(
loadQueue.getIterator(load_idx));
state->isLoad = true;
state->inst = load_inst;
state->isSplit = req->isSplit();
req->senderState(state);
}
req->buildPackets();
req->sendPacketToCache();
if (!req->isSent())
iewStage->blockMemInst(load_inst);
return NoFault;
}
template <class Impl>
Fault
LSQUnit<Impl>::write(LSQRequest *req, uint8_t *data, int store_idx)
{
assert(storeQueue[store_idx].valid());
DPRINTF(LSQUnit, "Doing write to store idx %i, addr %#x | storeHead:%i "
"[sn:%i]\n",
store_idx - 1, req->request()->getPaddr(), storeQueue.head() - 1,
storeQueue[store_idx].instruction()->seqNum);
storeQueue[store_idx].setRequest(req);
unsigned size = req->_size;
storeQueue[store_idx].size() = size;
bool store_no_data =
req->mainRequest()->getFlags() & Request::STORE_NO_DATA;
storeQueue[store_idx].isAllZeros() = store_no_data;
assert(size <= SQEntry::DataSize || store_no_data);
// copy data into the storeQueue only if the store request has valid data
if (!(req->request()->getFlags() & Request::CACHE_BLOCK_ZERO) &&
!req->request()->isCacheMaintenance() &&
!req->request()->isAtomic())
memcpy(storeQueue[store_idx].data(), data, size);
// This function only writes the data to the store queue, so no fault
// can happen here.
return NoFault;
}
#endif // __CPU_O3_LSQ_UNIT_HH__