| /* |
| * Copyright (c) 2012-2013, 2015, 2018 ARM Limited |
| * Copyright (c) 2016 Google Inc. |
| * Copyright (c) 2017, Centre National de la Recherche Scientifique |
| * All rights reserved. |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Thomas Grass |
| * Andreas Hansson |
| * Rahul Thakur |
| * Pierre-Yves Peneau |
| */ |
| |
| #include "mem/comm_monitor.hh" |
| |
| #include "base/trace.hh" |
| #include "debug/CommMonitor.hh" |
| #include "sim/stats.hh" |
| |
| CommMonitor::CommMonitor(Params* params) |
| : MemObject(params), |
| masterPort(name() + "-master", *this), |
| slavePort(name() + "-slave", *this), |
| samplePeriodicEvent([this]{ samplePeriodic(); }, name()), |
| samplePeriodTicks(params->sample_period), |
| samplePeriod(params->sample_period / SimClock::Float::s), |
| stats(params) |
| { |
| DPRINTF(CommMonitor, |
| "Created monitor %s with sample period %d ticks (%f ms)\n", |
| name(), samplePeriodTicks, samplePeriod * 1E3); |
| } |
| |
| CommMonitor* |
| CommMonitorParams::create() |
| { |
| return new CommMonitor(this); |
| } |
| |
| void |
| CommMonitor::init() |
| { |
| // make sure both sides of the monitor are connected |
| if (!slavePort.isConnected() || !masterPort.isConnected()) |
| fatal("Communication monitor is not connected on both sides.\n"); |
| } |
| |
| void |
| CommMonitor::regProbePoints() |
| { |
| ppPktReq.reset(new ProbePoints::Packet(getProbeManager(), "PktRequest")); |
| ppPktResp.reset(new ProbePoints::Packet(getProbeManager(), "PktResponse")); |
| } |
| |
| Port & |
| CommMonitor::getPort(const std::string &if_name, PortID idx) |
| { |
| if (if_name == "master") { |
| return masterPort; |
| } else if (if_name == "slave") { |
| return slavePort; |
| } else { |
| return MemObject::getPort(if_name, idx); |
| } |
| } |
| |
| void |
| CommMonitor::recvFunctional(PacketPtr pkt) |
| { |
| masterPort.sendFunctional(pkt); |
| } |
| |
| void |
| CommMonitor::recvFunctionalSnoop(PacketPtr pkt) |
| { |
| slavePort.sendFunctionalSnoop(pkt); |
| } |
| |
| void |
| CommMonitor::MonitorStats::updateReqStats( |
| const ProbePoints::PacketInfo& pkt_info, bool is_atomic, |
| bool expects_response) |
| { |
| if (pkt_info.cmd.isRead()) { |
| // Increment number of observed read transactions |
| if (!disableTransactionHists) |
| ++readTrans; |
| |
| // Get sample of burst length |
| if (!disableBurstLengthHists) |
| readBurstLengthHist.sample(pkt_info.size); |
| |
| // Sample the masked address |
| if (!disableAddrDists) |
| readAddrDist.sample(pkt_info.addr & readAddrMask); |
| |
| if (!disableITTDists) { |
| // Sample value of read-read inter transaction time |
| if (timeOfLastRead != 0) |
| ittReadRead.sample(curTick() - timeOfLastRead); |
| timeOfLastRead = curTick(); |
| |
| // Sample value of req-req inter transaction time |
| if (timeOfLastReq != 0) |
| ittReqReq.sample(curTick() - timeOfLastReq); |
| timeOfLastReq = curTick(); |
| } |
| if (!is_atomic && !disableOutstandingHists && expects_response) |
| ++outstandingReadReqs; |
| |
| } else if (pkt_info.cmd.isWrite()) { |
| // Same as for reads |
| if (!disableTransactionHists) |
| ++writeTrans; |
| |
| if (!disableBurstLengthHists) |
| writeBurstLengthHist.sample(pkt_info.size); |
| |
| // Update the bandwidth stats on the request |
| if (!disableBandwidthHists) { |
| writtenBytes += pkt_info.size; |
| totalWrittenBytes += pkt_info.size; |
| } |
| |
| // Sample the masked write address |
| if (!disableAddrDists) |
| writeAddrDist.sample(pkt_info.addr & writeAddrMask); |
| |
| if (!disableITTDists) { |
| // Sample value of write-to-write inter transaction time |
| if (timeOfLastWrite != 0) |
| ittWriteWrite.sample(curTick() - timeOfLastWrite); |
| timeOfLastWrite = curTick(); |
| |
| // Sample value of req-to-req inter transaction time |
| if (timeOfLastReq != 0) |
| ittReqReq.sample(curTick() - timeOfLastReq); |
| timeOfLastReq = curTick(); |
| } |
| |
| if (!is_atomic && !disableOutstandingHists && expects_response) |
| ++outstandingWriteReqs; |
| } |
| } |
| |
| void |
| CommMonitor::MonitorStats::updateRespStats( |
| const ProbePoints::PacketInfo& pkt_info, Tick latency, bool is_atomic) |
| { |
| if (pkt_info.cmd.isRead()) { |
| // Decrement number of outstanding read requests |
| if (!is_atomic && !disableOutstandingHists) { |
| assert(outstandingReadReqs != 0); |
| --outstandingReadReqs; |
| } |
| |
| if (!disableLatencyHists) |
| readLatencyHist.sample(latency); |
| |
| // Update the bandwidth stats based on responses for reads |
| if (!disableBandwidthHists) { |
| readBytes += pkt_info.size; |
| totalReadBytes += pkt_info.size; |
| } |
| |
| } else if (pkt_info.cmd.isWrite()) { |
| // Decrement number of outstanding write requests |
| if (!is_atomic && !disableOutstandingHists) { |
| assert(outstandingWriteReqs != 0); |
| --outstandingWriteReqs; |
| } |
| |
| if (!disableLatencyHists) |
| writeLatencyHist.sample(latency); |
| } |
| } |
| |
| Tick |
| CommMonitor::recvAtomic(PacketPtr pkt) |
| { |
| const bool expects_response(pkt->needsResponse() && |
| !pkt->cacheResponding()); |
| ProbePoints::PacketInfo req_pkt_info(pkt); |
| ppPktReq->notify(req_pkt_info); |
| |
| const Tick delay(masterPort.sendAtomic(pkt)); |
| |
| stats.updateReqStats(req_pkt_info, true, expects_response); |
| if (expects_response) |
| stats.updateRespStats(req_pkt_info, delay, true); |
| |
| assert(pkt->isResponse()); |
| ProbePoints::PacketInfo resp_pkt_info(pkt); |
| ppPktResp->notify(resp_pkt_info); |
| return delay; |
| } |
| |
| Tick |
| CommMonitor::recvAtomicSnoop(PacketPtr pkt) |
| { |
| return slavePort.sendAtomicSnoop(pkt); |
| } |
| |
| bool |
| CommMonitor::recvTimingReq(PacketPtr pkt) |
| { |
| // should always see a request |
| assert(pkt->isRequest()); |
| |
| // Store relevant fields of packet, because packet may be modified |
| // or even deleted when sendTiming() is called. |
| const ProbePoints::PacketInfo pkt_info(pkt); |
| |
| const bool expects_response(pkt->needsResponse() && |
| !pkt->cacheResponding()); |
| |
| // If a cache miss is served by a cache, a monitor near the memory |
| // would see a request which needs a response, but this response |
| // would not come back from the memory. Therefore we additionally |
| // have to check the cacheResponding flag |
| if (expects_response && !stats.disableLatencyHists) { |
| pkt->pushSenderState(new CommMonitorSenderState(curTick())); |
| } |
| |
| // Attempt to send the packet |
| bool successful = masterPort.sendTimingReq(pkt); |
| |
| // If not successful, restore the sender state |
| if (!successful && expects_response && !stats.disableLatencyHists) { |
| delete pkt->popSenderState(); |
| } |
| |
| if (successful) { |
| ppPktReq->notify(pkt_info); |
| } |
| |
| if (successful) { |
| DPRINTF(CommMonitor, "Forwarded %s request\n", pkt->isRead() ? "read" : |
| pkt->isWrite() ? "write" : "non read/write"); |
| stats.updateReqStats(pkt_info, false, expects_response); |
| } |
| return successful; |
| } |
| |
| bool |
| CommMonitor::recvTimingResp(PacketPtr pkt) |
| { |
| // should always see responses |
| assert(pkt->isResponse()); |
| |
| // Store relevant fields of packet, because packet may be modified |
| // or even deleted when sendTiming() is called. |
| const ProbePoints::PacketInfo pkt_info(pkt); |
| |
| Tick latency = 0; |
| CommMonitorSenderState* received_state = |
| dynamic_cast<CommMonitorSenderState*>(pkt->senderState); |
| |
| if (!stats.disableLatencyHists) { |
| // Restore initial sender state |
| if (received_state == NULL) |
| panic("Monitor got a response without monitor sender state\n"); |
| |
| // Restore the sate |
| pkt->senderState = received_state->predecessor; |
| } |
| |
| // Attempt to send the packet |
| bool successful = slavePort.sendTimingResp(pkt); |
| |
| if (!stats.disableLatencyHists) { |
| // If packet successfully send, sample value of latency, |
| // afterwards delete sender state, otherwise restore state |
| if (successful) { |
| latency = curTick() - received_state->transmitTime; |
| DPRINTF(CommMonitor, "Latency: %d\n", latency); |
| delete received_state; |
| } else { |
| // Don't delete anything and let the packet look like we |
| // did not touch it |
| pkt->senderState = received_state; |
| } |
| } |
| |
| if (successful) { |
| ppPktResp->notify(pkt_info); |
| DPRINTF(CommMonitor, "Received %s response\n", pkt->isRead() ? "read" : |
| pkt->isWrite() ? "write" : "non read/write"); |
| stats.updateRespStats(pkt_info, latency, false); |
| } |
| return successful; |
| } |
| |
| void |
| CommMonitor::recvTimingSnoopReq(PacketPtr pkt) |
| { |
| slavePort.sendTimingSnoopReq(pkt); |
| } |
| |
| bool |
| CommMonitor::recvTimingSnoopResp(PacketPtr pkt) |
| { |
| return masterPort.sendTimingSnoopResp(pkt); |
| } |
| |
| void |
| CommMonitor::recvRetrySnoopResp() |
| { |
| slavePort.sendRetrySnoopResp(); |
| } |
| |
| bool |
| CommMonitor::isSnooping() const |
| { |
| // check if the connected master port is snooping |
| return slavePort.isSnooping(); |
| } |
| |
| AddrRangeList |
| CommMonitor::getAddrRanges() const |
| { |
| // get the address ranges of the connected slave port |
| return masterPort.getAddrRanges(); |
| } |
| |
| void |
| CommMonitor::recvReqRetry() |
| { |
| slavePort.sendRetryReq(); |
| } |
| |
| void |
| CommMonitor::recvRespRetry() |
| { |
| masterPort.sendRetryResp(); |
| } |
| |
| bool |
| CommMonitor::tryTiming(PacketPtr pkt) |
| { |
| return masterPort.tryTiming(pkt); |
| } |
| |
| void |
| CommMonitor::recvRangeChange() |
| { |
| slavePort.sendRangeChange(); |
| } |
| |
| void |
| CommMonitor::regStats() |
| { |
| MemObject::regStats(); |
| |
| // Initialise all the monitor stats |
| using namespace Stats; |
| |
| stats.readBurstLengthHist |
| .init(params()->burst_length_bins) |
| .name(name() + ".readBurstLengthHist") |
| .desc("Histogram of burst lengths of transmitted packets") |
| .flags(stats.disableBurstLengthHists ? nozero : pdf); |
| |
| stats.writeBurstLengthHist |
| .init(params()->burst_length_bins) |
| .name(name() + ".writeBurstLengthHist") |
| .desc("Histogram of burst lengths of transmitted packets") |
| .flags(stats.disableBurstLengthHists ? nozero : pdf); |
| |
| // Stats based on received responses |
| stats.readBandwidthHist |
| .init(params()->bandwidth_bins) |
| .name(name() + ".readBandwidthHist") |
| .desc("Histogram of read bandwidth per sample period (bytes/s)") |
| .flags(stats.disableBandwidthHists ? nozero : pdf); |
| |
| stats.averageReadBW |
| .name(name() + ".averageReadBandwidth") |
| .desc("Average read bandwidth (bytes/s)") |
| .flags(stats.disableBandwidthHists ? nozero : pdf); |
| |
| stats.totalReadBytes |
| .name(name() + ".totalReadBytes") |
| .desc("Number of bytes read") |
| .flags(stats.disableBandwidthHists ? nozero : pdf); |
| |
| stats.averageReadBW = stats.totalReadBytes / simSeconds; |
| |
| // Stats based on successfully sent requests |
| stats.writeBandwidthHist |
| .init(params()->bandwidth_bins) |
| .name(name() + ".writeBandwidthHist") |
| .desc("Histogram of write bandwidth (bytes/s)") |
| .flags(stats.disableBandwidthHists ? (pdf | nozero) : pdf); |
| |
| stats.averageWriteBW |
| .name(name() + ".averageWriteBandwidth") |
| .desc("Average write bandwidth (bytes/s)") |
| .flags(stats.disableBandwidthHists ? nozero : pdf); |
| |
| stats.totalWrittenBytes |
| .name(name() + ".totalWrittenBytes") |
| .desc("Number of bytes written") |
| .flags(stats.disableBandwidthHists ? nozero : pdf); |
| |
| stats.averageWriteBW = stats.totalWrittenBytes / simSeconds; |
| |
| stats.readLatencyHist |
| .init(params()->latency_bins) |
| .name(name() + ".readLatencyHist") |
| .desc("Read request-response latency") |
| .flags(stats.disableLatencyHists ? nozero : pdf); |
| |
| stats.writeLatencyHist |
| .init(params()->latency_bins) |
| .name(name() + ".writeLatencyHist") |
| .desc("Write request-response latency") |
| .flags(stats.disableLatencyHists ? nozero : pdf); |
| |
| stats.ittReadRead |
| .init(1, params()->itt_max_bin, params()->itt_max_bin / |
| params()->itt_bins) |
| .name(name() + ".ittReadRead") |
| .desc("Read-to-read inter transaction time") |
| .flags(stats.disableITTDists ? nozero : pdf); |
| |
| stats.ittWriteWrite |
| .init(1, params()->itt_max_bin, params()->itt_max_bin / |
| params()->itt_bins) |
| .name(name() + ".ittWriteWrite") |
| .desc("Write-to-write inter transaction time") |
| .flags(stats.disableITTDists ? nozero : pdf); |
| |
| stats.ittReqReq |
| .init(1, params()->itt_max_bin, params()->itt_max_bin / |
| params()->itt_bins) |
| .name(name() + ".ittReqReq") |
| .desc("Request-to-request inter transaction time") |
| .flags(stats.disableITTDists ? nozero : pdf); |
| |
| stats.outstandingReadsHist |
| .init(params()->outstanding_bins) |
| .name(name() + ".outstandingReadsHist") |
| .desc("Outstanding read transactions") |
| .flags(stats.disableOutstandingHists ? nozero : pdf); |
| |
| stats.outstandingWritesHist |
| .init(params()->outstanding_bins) |
| .name(name() + ".outstandingWritesHist") |
| .desc("Outstanding write transactions") |
| .flags(stats.disableOutstandingHists ? nozero : pdf); |
| |
| stats.readTransHist |
| .init(params()->transaction_bins) |
| .name(name() + ".readTransHist") |
| .desc("Histogram of read transactions per sample period") |
| .flags(stats.disableTransactionHists ? nozero : pdf); |
| |
| stats.writeTransHist |
| .init(params()->transaction_bins) |
| .name(name() + ".writeTransHist") |
| .desc("Histogram of write transactions per sample period") |
| .flags(stats.disableTransactionHists ? nozero : pdf); |
| |
| stats.readAddrDist |
| .init(0) |
| .name(name() + ".readAddrDist") |
| .desc("Read address distribution") |
| .flags(stats.disableAddrDists ? nozero : pdf); |
| |
| stats.writeAddrDist |
| .init(0) |
| .name(name() + ".writeAddrDist") |
| .desc("Write address distribution") |
| .flags(stats.disableAddrDists ? nozero : pdf); |
| } |
| |
| void |
| CommMonitor::samplePeriodic() |
| { |
| // the periodic stats update runs on the granularity of sample |
| // periods, but in combination with this there may also be a |
| // external resets and dumps of the stats (through schedStatEvent) |
| // causing the stats themselves to capture less than a sample |
| // period |
| |
| // only capture if we have not reset the stats during the last |
| // sample period |
| if (simTicks.value() >= samplePeriodTicks) { |
| if (!stats.disableTransactionHists) { |
| stats.readTransHist.sample(stats.readTrans); |
| stats.writeTransHist.sample(stats.writeTrans); |
| } |
| |
| if (!stats.disableBandwidthHists) { |
| stats.readBandwidthHist.sample(stats.readBytes / samplePeriod); |
| stats.writeBandwidthHist.sample(stats.writtenBytes / samplePeriod); |
| } |
| |
| if (!stats.disableOutstandingHists) { |
| stats.outstandingReadsHist.sample(stats.outstandingReadReqs); |
| stats.outstandingWritesHist.sample(stats.outstandingWriteReqs); |
| } |
| } |
| |
| // reset the sampled values |
| stats.readTrans = 0; |
| stats.writeTrans = 0; |
| |
| stats.readBytes = 0; |
| stats.writtenBytes = 0; |
| |
| schedule(samplePeriodicEvent, curTick() + samplePeriodTicks); |
| } |
| |
| void |
| CommMonitor::startup() |
| { |
| schedule(samplePeriodicEvent, curTick() + samplePeriodTicks); |
| } |
