| /* |
| * Copyright (c) 2011-2012, 2014, 2018 ARM Limited |
| * Copyright (c) 2013 Advanced Micro Devices, Inc. |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2004-2006 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Korey Sewell |
| */ |
| |
| #ifndef __CPU_O3_LSQ_HH__ |
| #define __CPU_O3_LSQ_HH__ |
| |
| #include <map> |
| #include <queue> |
| |
| #include "arch/generic/tlb.hh" |
| #include "cpu/inst_seq.hh" |
| #include "cpu/o3/lsq_unit.hh" |
| #include "enums/SMTQueuePolicy.hh" |
| #include "mem/port.hh" |
| #include "sim/sim_object.hh" |
| |
| struct DerivO3CPUParams; |
| |
| template <class Impl> |
| class LSQ |
| |
| { |
| public: |
| typedef typename Impl::O3CPU O3CPU; |
| typedef typename Impl::DynInstPtr DynInstPtr; |
| typedef typename Impl::CPUPol::IEW IEW; |
| typedef typename Impl::CPUPol::LSQUnit LSQUnit; |
| |
| class LSQRequest; |
| /** Derived class to hold any sender state the LSQ needs. */ |
| class LSQSenderState : public Packet::SenderState |
| { |
| protected: |
| /** The senderState needs to know the LSQRequest who owns it. */ |
| LSQRequest* _request; |
| |
| /** Default constructor. */ |
| LSQSenderState(LSQRequest* request, bool isLoad_) |
| : _request(request), mainPkt(nullptr), pendingPacket(nullptr), |
| outstanding(0), isLoad(isLoad_), needWB(isLoad_), isSplit(false), |
| pktToSend(false), deleted(false) |
| { } |
| public: |
| |
| /** Instruction which initiated the access to memory. */ |
| DynInstPtr inst; |
| /** The main packet from a split load, used during writeback. */ |
| PacketPtr mainPkt; |
| /** A second packet from a split store that needs sending. */ |
| PacketPtr pendingPacket; |
| /** Number of outstanding packets to complete. */ |
| uint8_t outstanding; |
| /** Whether or not it is a load. */ |
| bool isLoad; |
| /** Whether or not the instruction will need to writeback. */ |
| bool needWB; |
| /** Whether or not this access is split in two. */ |
| bool isSplit; |
| /** Whether or not there is a packet that needs sending. */ |
| bool pktToSend; |
| /** Has the request been deleted? |
| * LSQ entries can be squashed before the response comes back. in that |
| * case the SenderState knows. |
| */ |
| bool deleted; |
| ContextID contextId() { return inst->contextId(); } |
| |
| /** Completes a packet and returns whether the access is finished. */ |
| inline bool isComplete() { return outstanding == 0; } |
| inline void deleteRequest() { deleted = true; } |
| inline bool alive() { return !deleted; } |
| LSQRequest* request() { return _request; } |
| virtual void complete() = 0; |
| void writebackDone() { _request->writebackDone(); } |
| }; |
| |
| /** Memory operation metadata. |
| * This class holds the information about a memory operation. It lives |
| * from initiateAcc to resource deallocation at commit or squash. |
| * LSQRequest objects are owned by the LQ/SQ Entry in the LSQUnit that |
| * holds the operation. It is also used by the LSQSenderState. In addition, |
| * the LSQRequest is a TranslationState, therefore, upon squash, there must |
| * be a defined ownership transferal in case the LSQ resources are |
| * deallocated before the TLB is done using the TranslationState. If that |
| * happens, the LSQRequest will be self-owned, and responsible to detect |
| * that its services are no longer required and self-destruct. |
| * |
| * Lifetime of a LSQRequest: |
| * +--------------------+ |
| * |LSQ creates and owns| |
| * +--------------------+ |
| * | |
| * +--------------------+ |
| * | Initate translation| |
| * +--------------------+ |
| * | |
| * ___^___ |
| * ___/ \___ |
| * ______/ Squashed? \ |
| * | \___ ___/ |
| * | \___ ___/ |
| * | v |
| * | | |
| * | +--------------------+ |
| * | | Translation done | |
| * | +--------------------+ |
| * | | |
| * | +--------------------+ |
| * | | Send packet |<------+ |
| * | +--------------------+ | |
| * | | | |
| * | ___^___ | |
| * | ___/ \___ | |
| * | ____/ Squashed? \ | |
| * | | \___ ___/ | |
| * | | \___ ___/ | |
| * | | v | |
| * | | | | |
| * | | ___^___ | |
| * | | ___/ \___ | |
| * | | / Done? \__________| |
| * | | \___ ___/ |
| * | | \___ ___/ |
| * | | v |
| * | | | |
| * | | +--------------------+ |
| * | | | Manage stuff | |
| * | | | Free resources | |
| * | | +--------------------+ |
| * | | |
| * | | +--------------------+ |
| * | | | senderState owns | |
| * | +->| onRecvTimingResp | |
| * | | free resources | |
| * | +--------------------+ |
| * | |
| * | +----------------------+ |
| * | | self owned (Trans) | |
| * +-->| on TranslationFinish | |
| * | free resources | |
| * +----------------------+ |
| * |
| * |
| */ |
| class LSQRequest : public BaseTLB::Translation |
| { |
| protected: |
| typedef uint32_t FlagsStorage; |
| typedef ::Flags<FlagsStorage> FlagsType; |
| |
| enum Flag : FlagsStorage |
| { |
| IsLoad = 0x00000001, |
| /** True if this is a store/atomic that writes registers (SC). */ |
| WbStore = 0x00000002, |
| Delayed = 0x00000004, |
| IsSplit = 0x00000008, |
| /** True if any translation has been sent to TLB. */ |
| TranslationStarted = 0x00000010, |
| /** True if there are un-replied outbound translations.. */ |
| TranslationFinished = 0x00000020, |
| Sent = 0x00000040, |
| Retry = 0x00000080, |
| Complete = 0x00000100, |
| /** Ownership tracking flags. */ |
| /** Translation squashed. */ |
| TranslationSquashed = 0x00000200, |
| /** Request discarded */ |
| Discarded = 0x00000400, |
| /** LSQ resources freed. */ |
| LSQEntryFreed = 0x00000800, |
| /** Store written back. */ |
| WritebackScheduled = 0x00001000, |
| WritebackDone = 0x00002000, |
| /** True if this is an atomic request */ |
| IsAtomic = 0x00004000 |
| }; |
| FlagsType flags; |
| |
| enum class State |
| { |
| NotIssued, |
| Translation, |
| Request, |
| Complete, |
| Squashed, |
| Fault, |
| }; |
| State _state; |
| LSQSenderState* _senderState; |
| void setState(const State& newState) { _state = newState; } |
| |
| uint32_t numTranslatedFragments; |
| uint32_t numInTranslationFragments; |
| |
| /** LQ/SQ entry idx. */ |
| uint32_t _entryIdx; |
| |
| void markDelayed() override { flags.set(Flag::Delayed); } |
| bool isDelayed() { return flags.isSet(Flag::Delayed); } |
| |
| public: |
| LSQUnit& _port; |
| const DynInstPtr _inst; |
| uint32_t _taskId; |
| PacketDataPtr _data; |
| std::vector<PacketPtr> _packets; |
| std::vector<RequestPtr> _requests; |
| std::vector<Fault> _fault; |
| uint64_t* _res; |
| const Addr _addr; |
| const uint32_t _size; |
| const Request::Flags _flags; |
| uint32_t _numOutstandingPackets; |
| AtomicOpFunctor *_amo_op; |
| protected: |
| LSQUnit* lsqUnit() { return &_port; } |
| LSQRequest(LSQUnit* port, const DynInstPtr& inst, bool isLoad) : |
| _state(State::NotIssued), _senderState(nullptr), |
| _port(*port), _inst(inst), _data(nullptr), |
| _res(nullptr), _addr(0), _size(0), _flags(0), |
| _numOutstandingPackets(0), _amo_op(nullptr) |
| { |
| flags.set(Flag::IsLoad, isLoad); |
| flags.set(Flag::WbStore, |
| _inst->isStoreConditional() || _inst->isAtomic()); |
| flags.set(Flag::IsAtomic, _inst->isAtomic()); |
| install(); |
| } |
| LSQRequest(LSQUnit* port, const DynInstPtr& inst, bool isLoad, |
| const Addr& addr, const uint32_t& size, |
| const Request::Flags& flags_, |
| PacketDataPtr data = nullptr, uint64_t* res = nullptr, |
| AtomicOpFunctor* amo_op = nullptr) |
| : _state(State::NotIssued), _senderState(nullptr), |
| numTranslatedFragments(0), |
| numInTranslationFragments(0), |
| _port(*port), _inst(inst), _data(data), |
| _res(res), _addr(addr), _size(size), |
| _flags(flags_), |
| _numOutstandingPackets(0), |
| _amo_op(amo_op) |
| { |
| flags.set(Flag::IsLoad, isLoad); |
| flags.set(Flag::WbStore, |
| _inst->isStoreConditional() || _inst->isAtomic()); |
| flags.set(Flag::IsAtomic, _inst->isAtomic()); |
| install(); |
| } |
| |
| bool |
| isLoad() const |
| { |
| return flags.isSet(Flag::IsLoad); |
| } |
| |
| bool |
| isAtomic() const |
| { |
| return flags.isSet(Flag::IsAtomic); |
| } |
| |
| /** Install the request in the LQ/SQ. */ |
| void install() |
| { |
| if (isLoad()) { |
| _port.loadQueue[_inst->lqIdx].setRequest(this); |
| } else { |
| // Store, StoreConditional, and Atomic requests are pushed |
| // to this storeQueue |
| _port.storeQueue[_inst->sqIdx].setRequest(this); |
| } |
| } |
| virtual bool |
| squashed() const override |
| { |
| return _inst->isSquashed(); |
| } |
| |
| /** |
| * Test if the LSQRequest has been released, i.e. self-owned. |
| * An LSQRequest manages itself when the resources on the LSQ are freed |
| * but the translation is still going on and the LSQEntry was freed. |
| */ |
| bool |
| isReleased() |
| { |
| return flags.isSet(Flag::LSQEntryFreed) || |
| flags.isSet(Flag::Discarded); |
| } |
| |
| /** Release the LSQRequest. |
| * Notify the sender state that the request it points to is not valid |
| * anymore. Understand if the request is orphan (self-managed) and if |
| * so, mark it as freed, else destroy it, as this means |
| * the end of its life cycle. |
| * An LSQRequest is orphan when its resources are released |
| * but there is any in-flight translation request to the TLB or access |
| * request to the memory. |
| */ |
| void release(Flag reason) |
| { |
| assert(reason == Flag::LSQEntryFreed || reason == Flag::Discarded); |
| if (!isAnyOutstandingRequest()) { |
| delete this; |
| } else { |
| if (_senderState) { |
| _senderState->deleteRequest(); |
| } |
| flags.set(reason); |
| } |
| } |
| |
| /** Destructor. |
| * The LSQRequest owns the request. If the packet has already been |
| * sent, the sender state will be deleted upon receiving the reply. |
| */ |
| virtual ~LSQRequest() |
| { |
| assert(!isAnyOutstandingRequest()); |
| _inst->savedReq = nullptr; |
| if (_senderState) |
| delete _senderState; |
| |
| for (auto r: _packets) |
| delete r; |
| }; |
| |
| |
| public: |
| /** Convenience getters/setters. */ |
| /** @{ */ |
| /** Set up Context numbers. */ |
| void |
| setContext(const ContextID& context_id) |
| { |
| request()->setContext(context_id); |
| } |
| |
| const DynInstPtr& |
| instruction() |
| { |
| return _inst; |
| } |
| |
| /** Set up virtual request. |
| * For a previously allocated Request objects. |
| */ |
| void |
| setVirt(int asid, Addr vaddr, unsigned size, Request::Flags flags_, |
| MasterID mid, Addr pc) |
| { |
| request()->setVirt(asid, vaddr, size, flags_, mid, pc); |
| } |
| |
| void |
| taskId(const uint32_t& v) |
| { |
| _taskId = v; |
| for (auto& r: _requests) |
| r->taskId(v); |
| } |
| |
| uint32_t taskId() const { return _taskId; } |
| RequestPtr request(int idx = 0) { return _requests.at(idx); } |
| |
| const RequestPtr |
| request(int idx = 0) const |
| { |
| return _requests.at(idx); |
| } |
| |
| Addr getVaddr(int idx = 0) const { return request(idx)->getVaddr(); } |
| virtual void initiateTranslation() = 0; |
| |
| PacketPtr packet(int idx = 0) { return _packets.at(idx); } |
| |
| virtual PacketPtr |
| mainPacket() |
| { |
| assert (_packets.size() == 1); |
| return packet(); |
| } |
| |
| virtual RequestPtr |
| mainRequest() |
| { |
| assert (_requests.size() == 1); |
| return request(); |
| } |
| |
| void |
| senderState(LSQSenderState* st) |
| { |
| _senderState = st; |
| for (auto& pkt: _packets) { |
| if (pkt) |
| pkt->senderState = st; |
| } |
| } |
| |
| const LSQSenderState* |
| senderState() const |
| { |
| return _senderState; |
| } |
| |
| /** |
| * Mark senderState as discarded. This will cause to discard response |
| * packets from the cache. |
| */ |
| void |
| discardSenderState() |
| { |
| assert(_senderState); |
| _senderState->deleteRequest(); |
| } |
| |
| /** |
| * Test if there is any in-flight translation or mem access request |
| */ |
| bool |
| isAnyOutstandingRequest() |
| { |
| return numInTranslationFragments > 0 || |
| _numOutstandingPackets > 0 || |
| (flags.isSet(Flag::WritebackScheduled) && |
| !flags.isSet(Flag::WritebackDone)); |
| } |
| |
| bool |
| isSplit() const |
| { |
| return flags.isSet(Flag::IsSplit); |
| } |
| /** @} */ |
| virtual bool recvTimingResp(PacketPtr pkt) = 0; |
| virtual void sendPacketToCache() = 0; |
| virtual void buildPackets() = 0; |
| |
| /** |
| * Memory mapped IPR accesses |
| */ |
| virtual void handleIprWrite(ThreadContext *thread, PacketPtr pkt) = 0; |
| virtual Cycles handleIprRead(ThreadContext *thread, PacketPtr pkt) = 0; |
| |
| /** |
| * Test if the request accesses a particular cache line. |
| */ |
| virtual bool isCacheBlockHit(Addr blockAddr, Addr cacheBlockMask) = 0; |
| |
| /** Update the status to reflect that a packet was sent. */ |
| void |
| packetSent() |
| { |
| flags.set(Flag::Sent); |
| } |
| /** Update the status to reflect that a packet was not sent. |
| * When a packet fails to be sent, we mark the request as needing a |
| * retry. Note that Retry flag is sticky. |
| */ |
| void |
| packetNotSent() |
| { |
| flags.set(Flag::Retry); |
| flags.clear(Flag::Sent); |
| } |
| |
| void sendFragmentToTranslation(int i); |
| bool |
| isComplete() |
| { |
| return flags.isSet(Flag::Complete); |
| } |
| |
| bool |
| isInTranslation() |
| { |
| return _state == State::Translation; |
| } |
| |
| bool |
| isTranslationComplete() |
| { |
| return flags.isSet(Flag::TranslationStarted) && |
| !isInTranslation(); |
| } |
| |
| bool |
| isTranslationBlocked() |
| { |
| return _state == State::Translation && |
| flags.isSet(Flag::TranslationStarted) && |
| !flags.isSet(Flag::TranslationFinished); |
| } |
| |
| bool |
| isSent() |
| { |
| return flags.isSet(Flag::Sent); |
| } |
| |
| /** |
| * The LSQ entry is cleared |
| */ |
| void |
| freeLSQEntry() |
| { |
| release(Flag::LSQEntryFreed); |
| } |
| |
| /** |
| * The request is discarded (e.g. partial store-load forwarding) |
| */ |
| void |
| discard() |
| { |
| release(Flag::Discarded); |
| } |
| |
| void |
| packetReplied() |
| { |
| assert(_numOutstandingPackets > 0); |
| _numOutstandingPackets--; |
| if (_numOutstandingPackets == 0 && isReleased()) |
| delete this; |
| } |
| |
| void |
| writebackScheduled() |
| { |
| assert(!flags.isSet(Flag::WritebackScheduled)); |
| flags.set(Flag::WritebackScheduled); |
| } |
| |
| void |
| writebackDone() |
| { |
| flags.set(Flag::WritebackDone); |
| /* If the lsq resources are already free */ |
| if (isReleased()) { |
| delete this; |
| } |
| } |
| |
| void |
| squashTranslation() |
| { |
| assert(numInTranslationFragments == 0); |
| flags.set(Flag::TranslationSquashed); |
| /* If we are on our own, self-destruct. */ |
| if (isReleased()) { |
| delete this; |
| } |
| } |
| |
| void |
| complete() |
| { |
| flags.set(Flag::Complete); |
| } |
| }; |
| |
| class SingleDataRequest : public LSQRequest |
| { |
| protected: |
| /* Given that we are inside templates, children need explicit |
| * declaration of the names in the parent class. */ |
| using Flag = typename LSQRequest::Flag; |
| using State = typename LSQRequest::State; |
| using LSQRequest::_fault; |
| using LSQRequest::_inst; |
| using LSQRequest::_packets; |
| using LSQRequest::_port; |
| using LSQRequest::_res; |
| using LSQRequest::_senderState; |
| using LSQRequest::_state; |
| using LSQRequest::flags; |
| using LSQRequest::isLoad; |
| using LSQRequest::isTranslationComplete; |
| using LSQRequest::lsqUnit; |
| using LSQRequest::request; |
| using LSQRequest::sendFragmentToTranslation; |
| using LSQRequest::setState; |
| using LSQRequest::numInTranslationFragments; |
| using LSQRequest::numTranslatedFragments; |
| using LSQRequest::_numOutstandingPackets; |
| using LSQRequest::_amo_op; |
| public: |
| SingleDataRequest(LSQUnit* port, const DynInstPtr& inst, bool isLoad, |
| const Addr& addr, const uint32_t& size, |
| const Request::Flags& flags_, |
| PacketDataPtr data = nullptr, |
| uint64_t* res = nullptr, |
| AtomicOpFunctor* amo_op = nullptr) : |
| LSQRequest(port, inst, isLoad, addr, size, flags_, data, res, |
| amo_op) |
| { |
| LSQRequest::_requests.push_back( |
| std::make_shared<Request>(inst->getASID(), addr, size, |
| flags_, inst->masterId(), inst->instAddr(), |
| inst->contextId(), amo_op)); |
| LSQRequest::_requests.back()->setReqInstSeqNum(inst->seqNum); |
| } |
| inline virtual ~SingleDataRequest() {} |
| virtual void initiateTranslation(); |
| virtual void finish(const Fault &fault, const RequestPtr &req, |
| ThreadContext* tc, BaseTLB::Mode mode); |
| virtual bool recvTimingResp(PacketPtr pkt); |
| virtual void sendPacketToCache(); |
| virtual void buildPackets(); |
| virtual void handleIprWrite(ThreadContext *thread, PacketPtr pkt); |
| virtual Cycles handleIprRead(ThreadContext *thread, PacketPtr pkt); |
| virtual bool isCacheBlockHit(Addr blockAddr, Addr cacheBlockMask); |
| }; |
| |
| class SplitDataRequest : public LSQRequest |
| { |
| protected: |
| /* Given that we are inside templates, children need explicit |
| * declaration of the names in the parent class. */ |
| using Flag = typename LSQRequest::Flag; |
| using State = typename LSQRequest::State; |
| using LSQRequest::_addr; |
| using LSQRequest::_data; |
| using LSQRequest::_fault; |
| using LSQRequest::_flags; |
| using LSQRequest::_inst; |
| using LSQRequest::_packets; |
| using LSQRequest::_port; |
| using LSQRequest::_requests; |
| using LSQRequest::_res; |
| using LSQRequest::_senderState; |
| using LSQRequest::_size; |
| using LSQRequest::_state; |
| using LSQRequest::_taskId; |
| using LSQRequest::flags; |
| using LSQRequest::isLoad; |
| using LSQRequest::isTranslationComplete; |
| using LSQRequest::lsqUnit; |
| using LSQRequest::numInTranslationFragments; |
| using LSQRequest::numTranslatedFragments; |
| using LSQRequest::request; |
| using LSQRequest::sendFragmentToTranslation; |
| using LSQRequest::setState; |
| using LSQRequest::_numOutstandingPackets; |
| |
| uint32_t numFragments; |
| uint32_t numReceivedPackets; |
| RequestPtr mainReq; |
| PacketPtr _mainPacket; |
| |
| |
| public: |
| SplitDataRequest(LSQUnit* port, const DynInstPtr& inst, bool isLoad, |
| const Addr& addr, const uint32_t& size, |
| const Request::Flags & flags_, |
| PacketDataPtr data = nullptr, |
| uint64_t* res = nullptr) : |
| LSQRequest(port, inst, isLoad, addr, size, flags_, data, res), |
| numFragments(0), |
| numReceivedPackets(0), |
| mainReq(nullptr), |
| _mainPacket(nullptr) |
| { |
| flags.set(Flag::IsSplit); |
| } |
| virtual ~SplitDataRequest() |
| { |
| if (mainReq) { |
| mainReq = nullptr; |
| } |
| if (_mainPacket) { |
| delete _mainPacket; |
| _mainPacket = nullptr; |
| } |
| } |
| virtual void finish(const Fault &fault, const RequestPtr &req, |
| ThreadContext* tc, BaseTLB::Mode mode); |
| virtual bool recvTimingResp(PacketPtr pkt); |
| virtual void initiateTranslation(); |
| virtual void sendPacketToCache(); |
| virtual void buildPackets(); |
| |
| virtual void handleIprWrite(ThreadContext *thread, PacketPtr pkt); |
| virtual Cycles handleIprRead(ThreadContext *thread, PacketPtr pkt); |
| virtual bool isCacheBlockHit(Addr blockAddr, Addr cacheBlockMask); |
| |
| virtual RequestPtr mainRequest(); |
| virtual PacketPtr mainPacket(); |
| }; |
| |
| /** Constructs an LSQ with the given parameters. */ |
| LSQ(O3CPU *cpu_ptr, IEW *iew_ptr, DerivO3CPUParams *params); |
| ~LSQ() { } |
| |
| /** Returns the name of the LSQ. */ |
| std::string name() const; |
| |
| /** Registers statistics of each LSQ unit. */ |
| void regStats(); |
| |
| /** Sets the pointer to the list of active threads. */ |
| void setActiveThreads(std::list<ThreadID> *at_ptr); |
| |
| /** Perform sanity checks after a drain. */ |
| void drainSanityCheck() const; |
| /** Has the LSQ drained? */ |
| bool isDrained() const; |
| /** Takes over execution from another CPU's thread. */ |
| void takeOverFrom(); |
| |
| /** Number of entries needed for the given amount of threads.*/ |
| int entryAmount(ThreadID num_threads); |
| |
| /** Ticks the LSQ. */ |
| void tick(); |
| |
| /** Inserts a load into the LSQ. */ |
| void insertLoad(const DynInstPtr &load_inst); |
| /** Inserts a store into the LSQ. */ |
| void insertStore(const DynInstPtr &store_inst); |
| |
| /** Executes a load. */ |
| Fault executeLoad(const DynInstPtr &inst); |
| |
| /** Executes a store. */ |
| Fault executeStore(const DynInstPtr &inst); |
| |
| /** |
| * Commits loads up until the given sequence number for a specific thread. |
| */ |
| void commitLoads(InstSeqNum &youngest_inst, ThreadID tid) |
| { thread.at(tid).commitLoads(youngest_inst); } |
| |
| /** |
| * Commits stores up until the given sequence number for a specific thread. |
| */ |
| void commitStores(InstSeqNum &youngest_inst, ThreadID tid) |
| { thread.at(tid).commitStores(youngest_inst); } |
| |
| /** |
| * Attempts to write back stores until all cache ports are used or the |
| * interface becomes blocked. |
| */ |
| void writebackStores(); |
| /** Same as above, but only for one thread. */ |
| void writebackStores(ThreadID tid); |
| |
| /** |
| * Squash instructions from a thread until the specified sequence number. |
| */ |
| void |
| squash(const InstSeqNum &squashed_num, ThreadID tid) |
| { |
| thread.at(tid).squash(squashed_num); |
| } |
| |
| /** Returns whether or not there was a memory ordering violation. */ |
| bool violation(); |
| /** |
| * Returns whether or not there was a memory ordering violation for a |
| * specific thread. |
| */ |
| bool violation(ThreadID tid) { return thread.at(tid).violation(); } |
| |
| /** Gets the instruction that caused the memory ordering violation. */ |
| DynInstPtr |
| getMemDepViolator(ThreadID tid) |
| { |
| return thread.at(tid).getMemDepViolator(); |
| } |
| |
| /** Returns the head index of the load queue for a specific thread. */ |
| int getLoadHead(ThreadID tid) { return thread.at(tid).getLoadHead(); } |
| |
| /** Returns the sequence number of the head of the load queue. */ |
| InstSeqNum |
| getLoadHeadSeqNum(ThreadID tid) |
| { |
| return thread.at(tid).getLoadHeadSeqNum(); |
| } |
| |
| /** Returns the head index of the store queue. */ |
| int getStoreHead(ThreadID tid) { return thread.at(tid).getStoreHead(); } |
| |
| /** Returns the sequence number of the head of the store queue. */ |
| InstSeqNum |
| getStoreHeadSeqNum(ThreadID tid) |
| { |
| return thread.at(tid).getStoreHeadSeqNum(); |
| } |
| |
| /** Returns the number of instructions in all of the queues. */ |
| int getCount(); |
| /** Returns the number of instructions in the queues of one thread. */ |
| int getCount(ThreadID tid) { return thread.at(tid).getCount(); } |
| |
| /** Returns the total number of loads in the load queue. */ |
| int numLoads(); |
| /** Returns the total number of loads for a single thread. */ |
| int numLoads(ThreadID tid) { return thread.at(tid).numLoads(); } |
| |
| /** Returns the total number of stores in the store queue. */ |
| int numStores(); |
| /** Returns the total number of stores for a single thread. */ |
| int numStores(ThreadID tid) { return thread.at(tid).numStores(); } |
| |
| /** Returns the number of free load entries. */ |
| unsigned numFreeLoadEntries(); |
| |
| /** Returns the number of free store entries. */ |
| unsigned numFreeStoreEntries(); |
| |
| /** Returns the number of free entries for a specific thread. */ |
| unsigned numFreeEntries(ThreadID tid); |
| |
| /** Returns the number of free entries in the LQ for a specific thread. */ |
| unsigned numFreeLoadEntries(ThreadID tid); |
| |
| /** Returns the number of free entries in the SQ for a specific thread. */ |
| unsigned numFreeStoreEntries(ThreadID tid); |
| |
| /** Returns if the LSQ is full (either LQ or SQ is full). */ |
| bool isFull(); |
| /** |
| * Returns if the LSQ is full for a specific thread (either LQ or SQ is |
| * full). |
| */ |
| bool isFull(ThreadID tid); |
| |
| /** Returns if the LSQ is empty (both LQ and SQ are empty). */ |
| bool isEmpty() const; |
| /** Returns if all of the LQs are empty. */ |
| bool lqEmpty() const; |
| /** Returns if all of the SQs are empty. */ |
| bool sqEmpty() const; |
| |
| /** Returns if any of the LQs are full. */ |
| bool lqFull(); |
| /** Returns if the LQ of a given thread is full. */ |
| bool lqFull(ThreadID tid); |
| |
| /** Returns if any of the SQs are full. */ |
| bool sqFull(); |
| /** Returns if the SQ of a given thread is full. */ |
| bool sqFull(ThreadID tid); |
| |
| /** |
| * Returns if the LSQ is stalled due to a memory operation that must be |
| * replayed. |
| */ |
| bool isStalled(); |
| /** |
| * Returns if the LSQ of a specific thread is stalled due to a memory |
| * operation that must be replayed. |
| */ |
| bool isStalled(ThreadID tid); |
| |
| /** Returns whether or not there are any stores to write back to memory. */ |
| bool hasStoresToWB(); |
| |
| /** Returns whether or not a specific thread has any stores to write back |
| * to memory. |
| */ |
| bool hasStoresToWB(ThreadID tid) { return thread.at(tid).hasStoresToWB(); } |
| |
| /** Returns the number of stores a specific thread has to write back. */ |
| int numStoresToWB(ThreadID tid) { return thread.at(tid).numStoresToWB(); } |
| |
| /** Returns if the LSQ will write back to memory this cycle. */ |
| bool willWB(); |
| /** Returns if the LSQ of a specific thread will write back to memory this |
| * cycle. |
| */ |
| bool willWB(ThreadID tid) { return thread.at(tid).willWB(); } |
| |
| /** Debugging function to print out all instructions. */ |
| void dumpInsts() const; |
| /** Debugging function to print out instructions from a specific thread. */ |
| void dumpInsts(ThreadID tid) const { thread.at(tid).dumpInsts(); } |
| |
| /** Executes a read operation, using the load specified at the load |
| * index. |
| */ |
| Fault read(LSQRequest* req, int load_idx); |
| |
| /** Executes a store operation, using the store specified at the store |
| * index. |
| */ |
| Fault write(LSQRequest* req, uint8_t *data, int store_idx); |
| |
| /** |
| * Retry the previous send that failed. |
| */ |
| void recvReqRetry(); |
| |
| void completeDataAccess(PacketPtr pkt); |
| /** |
| * Handles writing back and completing the load or store that has |
| * returned from memory. |
| * |
| * @param pkt Response packet from the memory sub-system |
| */ |
| bool recvTimingResp(PacketPtr pkt); |
| |
| void recvTimingSnoopReq(PacketPtr pkt); |
| |
| Fault pushRequest(const DynInstPtr& inst, bool isLoad, uint8_t *data, |
| unsigned int size, Addr addr, Request::Flags flags, |
| uint64_t *res, AtomicOpFunctor *amo_op); |
| |
| /** The CPU pointer. */ |
| O3CPU *cpu; |
| |
| /** The IEW stage pointer. */ |
| IEW *iewStage; |
| |
| /** Is D-cache blocked? */ |
| bool cacheBlocked() const; |
| /** Set D-cache blocked status */ |
| void cacheBlocked(bool v); |
| /** Is any store port available to use? */ |
| bool cachePortAvailable(bool is_load) const; |
| /** Another store port is in use */ |
| void cachePortBusy(bool is_load); |
| |
| protected: |
| /** D-cache is blocked */ |
| bool _cacheBlocked; |
| /** The number of cache ports available each cycle (stores only). */ |
| int cacheStorePorts; |
| /** The number of used cache ports in this cycle by stores. */ |
| int usedStorePorts; |
| /** The number of cache ports available each cycle (loads only). */ |
| int cacheLoadPorts; |
| /** The number of used cache ports in this cycle by loads. */ |
| int usedLoadPorts; |
| |
| |
| /** The LSQ policy for SMT mode. */ |
| SMTQueuePolicy lsqPolicy; |
| |
| /** Auxiliary function to calculate per-thread max LSQ allocation limit. |
| * Depending on a policy, number of entries and possibly number of threads |
| * and threshold, this function calculates how many resources each thread |
| * can occupy at most. |
| */ |
| static uint32_t |
| maxLSQAllocation(SMTQueuePolicy pol, uint32_t entries, |
| uint32_t numThreads, uint32_t SMTThreshold) |
| { |
| if (pol == SMTQueuePolicy::Dynamic) { |
| return entries; |
| } else if (pol == SMTQueuePolicy::Partitioned) { |
| //@todo:make work if part_amt doesnt divide evenly. |
| return entries / numThreads; |
| } else if (pol == SMTQueuePolicy::Threshold) { |
| //Divide up by threshold amount |
| //@todo: Should threads check the max and the total |
| //amount of the LSQ |
| return SMTThreshold; |
| } |
| return 0; |
| } |
| |
| /** List of Active Threads in System. */ |
| std::list<ThreadID> *activeThreads; |
| |
| /** Total Size of LQ Entries. */ |
| unsigned LQEntries; |
| /** Total Size of SQ Entries. */ |
| unsigned SQEntries; |
| |
| /** Max LQ Size - Used to Enforce Sharing Policies. */ |
| unsigned maxLQEntries; |
| |
| /** Max SQ Size - Used to Enforce Sharing Policies. */ |
| unsigned maxSQEntries; |
| |
| /** The LSQ units for individual threads. */ |
| std::vector<LSQUnit> thread; |
| |
| /** Number of Threads. */ |
| ThreadID numThreads; |
| }; |
| |
| template <class Impl> |
| Fault |
| LSQ<Impl>::read(LSQRequest* req, int load_idx) |
| { |
| ThreadID tid = cpu->contextToThread(req->request()->contextId()); |
| |
| return thread.at(tid).read(req, load_idx); |
| } |
| |
| template <class Impl> |
| Fault |
| LSQ<Impl>::write(LSQRequest* req, uint8_t *data, int store_idx) |
| { |
| ThreadID tid = cpu->contextToThread(req->request()->contextId()); |
| |
| return thread.at(tid).write(req, data, store_idx); |
| } |
| |
| #endif // __CPU_O3_LSQ_HH__ |
