/*
 * Copyright (c) 2011 Google
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Gabe Black
 */

#include "arch/x86/decoder.hh"

#include "arch/x86/regs/misc.hh"
#include "base/misc.hh"
#include "base/trace.hh"
#include "base/types.hh"
#include "debug/Decoder.hh"

namespace X86ISA
{

Decoder::State
Decoder::doResetState()
{
    origPC = basePC + offset;
    DPRINTF(Decoder, "Setting origPC to %#x\n", origPC);
    instBytes = &decodePages->lookup(origPC);
    chunkIdx = 0;

    emi.rex = 0;
    emi.legacy = 0;
    emi.vex = 0;

    emi.opcode.type = BadOpcode;
    emi.opcode.op = 0;

    immediateCollected = 0;
    emi.immediate = 0;
    emi.displacement = 0;
    emi.dispSize = 0;

    emi.modRM = 0;
    emi.sib = 0;

    if (instBytes->si) {
        return FromCacheState;
    } else {
        instBytes->chunks.clear();
        return PrefixState;
    }
}

void
Decoder::process()
{
    //This function drives the decoder state machine.

    //Some sanity checks. You shouldn't try to process more bytes if
    //there aren't any, and you shouldn't overwrite an already
    //decoder ExtMachInst.
    assert(!outOfBytes);
    assert(!instDone);

    if (state == ResetState)
        state = doResetState();
    if (state == FromCacheState) {
        state = doFromCacheState();
    } else {
        instBytes->chunks.push_back(fetchChunk);
    }

    //While there's still something to do...
    while (!instDone && !outOfBytes) {
        uint8_t nextByte = getNextByte();
        switch (state) {
          case PrefixState:
            state = doPrefixState(nextByte);
            break;

          case TwoByteVexState:
            state = doTwoByteVexState(nextByte);
            break;

          case ThreeByteVexFirstState:
            state = doThreeByteVexFirstState(nextByte);
            break;

          case ThreeByteVexSecondState:
            state = doThreeByteVexSecondState(nextByte);
            break;

          case OneByteOpcodeState:
            state = doOneByteOpcodeState(nextByte);
            break;
          case TwoByteOpcodeState:
            state = doTwoByteOpcodeState(nextByte);
            break;
          case ThreeByte0F38OpcodeState:
            state = doThreeByte0F38OpcodeState(nextByte);
            break;
          case ThreeByte0F3AOpcodeState:
            state = doThreeByte0F3AOpcodeState(nextByte);
            break;
          case ModRMState:
            state = doModRMState(nextByte);
            break;
          case SIBState:
            state = doSIBState(nextByte);
            break;
          case DisplacementState:
            state = doDisplacementState();
            break;
          case ImmediateState:
            state = doImmediateState();
            break;
          case ErrorState:
            panic("Went to the error state in the decoder.\n");
          default:
            panic("Unrecognized state! %d\n", state);
        }
    }
}

Decoder::State
Decoder::doFromCacheState()
{
    DPRINTF(Decoder, "Looking at cache state.\n");
    if ((fetchChunk & instBytes->masks[chunkIdx]) !=
            instBytes->chunks[chunkIdx]) {
        DPRINTF(Decoder, "Decode cache miss.\n");
        // The chached chunks didn't match what was fetched. Fall back to the
        // predecoder.
        instBytes->chunks[chunkIdx] = fetchChunk;
        instBytes->chunks.resize(chunkIdx + 1);
        instBytes->si = NULL;
        chunkIdx = 0;
        fetchChunk = instBytes->chunks[0];
        offset = origPC % sizeof(MachInst);
        basePC = origPC - offset;
        return PrefixState;
    } else if (chunkIdx == instBytes->chunks.size() - 1) {
        // We matched the cache, so use its value.
        instDone = true;
        offset = instBytes->lastOffset;
        if (offset == sizeof(MachInst))
            outOfBytes = true;
        return ResetState;
    } else {
        // We matched so far, but need to check more chunks.
        chunkIdx++;
        outOfBytes = true;
        return FromCacheState;
    }
}

//Either get a prefix and record it in the ExtMachInst, or send the
//state machine on to get the opcode(s).
Decoder::State
Decoder::doPrefixState(uint8_t nextByte)
{
    uint8_t prefix = Prefixes[nextByte];
    State nextState = PrefixState;
    // REX prefixes are only recognized in 64 bit mode.
    if (prefix == RexPrefix && emi.mode.submode != SixtyFourBitMode)
        prefix = 0;
    if (prefix)
        consumeByte();
    switch(prefix)
    {
        //Operand size override prefixes
      case OperandSizeOverride:
        DPRINTF(Decoder, "Found operand size override prefix.\n");
        emi.legacy.op = true;
        break;
      case AddressSizeOverride:
        DPRINTF(Decoder, "Found address size override prefix.\n");
        emi.legacy.addr = true;
        break;
        //Segment override prefixes
      case CSOverride:
      case DSOverride:
      case ESOverride:
      case FSOverride:
      case GSOverride:
      case SSOverride:
        DPRINTF(Decoder, "Found segment override.\n");
        emi.legacy.seg = prefix;
        break;
      case Lock:
        DPRINTF(Decoder, "Found lock prefix.\n");
        emi.legacy.lock = true;
        break;
      case Rep:
        DPRINTF(Decoder, "Found rep prefix.\n");
        emi.legacy.rep = true;
        break;
      case Repne:
        DPRINTF(Decoder, "Found repne prefix.\n");
        emi.legacy.repne = true;
        break;
      case RexPrefix:
        DPRINTF(Decoder, "Found Rex prefix %#x.\n", nextByte);
        emi.rex = nextByte;
        break;

      case Vex2Prefix:
        DPRINTF(Decoder, "Found VEX two-byte prefix %#x.\n", nextByte);
        emi.vex.zero = nextByte;
        nextState = TwoByteVexState;
        break;

      case Vex3Prefix:
        DPRINTF(Decoder, "Found VEX three-byte prefix %#x.\n", nextByte);
        emi.vex.zero = nextByte;
        nextState = ThreeByteVexFirstState;
        break;

      case 0:
        nextState = OneByteOpcodeState;
        break;

      default:
        panic("Unrecognized prefix %#x\n", nextByte);
    }
    return nextState;
}

Decoder::State
Decoder::doTwoByteVexState(uint8_t nextByte)
{
    assert(emi.vex.zero == 0xc5);
    consumeByte();
    TwoByteVex tbe = 0;
    tbe.first = nextByte;

    emi.vex.first.r = tbe.first.r;
    emi.vex.first.x = 1;
    emi.vex.first.b = 1;
    emi.vex.first.map_select = 1;

    emi.vex.second.w = 0;
    emi.vex.second.vvvv = tbe.first.vvvv;
    emi.vex.second.l = tbe.first.l;
    emi.vex.second.pp = tbe.first.pp;

    emi.opcode.type = Vex;
    return OneByteOpcodeState;
}

Decoder::State
Decoder::doThreeByteVexFirstState(uint8_t nextByte)
{
    consumeByte();
    emi.vex.first = nextByte;
    return ThreeByteVexSecondState;
}

Decoder::State
Decoder::doThreeByteVexSecondState(uint8_t nextByte)
{
    consumeByte();
    emi.vex.second = nextByte;
    emi.opcode.type = Vex;
    return OneByteOpcodeState;
}

// Load the first opcode byte. Determine if there are more opcode bytes, and
// if not, what immediate and/or ModRM is needed.
Decoder::State
Decoder::doOneByteOpcodeState(uint8_t nextByte)
{
    State nextState = ErrorState;
    consumeByte();

    if (emi.vex.zero != 0) {
        DPRINTF(Decoder, "Found VEX opcode %#x.\n", nextByte);
        emi.opcode.op = nextByte;
        const uint8_t opcode_map = emi.vex.first.map_select;
        nextState = processExtendedOpcode(ImmediateTypeVex[opcode_map]);
    } else if (nextByte == 0x0f) {
        nextState = TwoByteOpcodeState;
        DPRINTF(Decoder, "Found opcode escape byte %#x.\n", nextByte);
    } else {
        DPRINTF(Decoder, "Found one byte opcode %#x.\n", nextByte);
        emi.opcode.type = OneByteOpcode;
        emi.opcode.op = nextByte;

        nextState = processOpcode(ImmediateTypeOneByte, UsesModRMOneByte,
                                  nextByte >= 0xA0 && nextByte <= 0xA3);
    }
    return nextState;
}

// Load the second opcode byte. Determine if there are more opcode bytes, and
// if not, what immediate and/or ModRM is needed.
Decoder::State
Decoder::doTwoByteOpcodeState(uint8_t nextByte)
{
    State nextState = ErrorState;
    consumeByte();
    if (nextByte == 0x38) {
        nextState = ThreeByte0F38OpcodeState;
        DPRINTF(Decoder, "Found opcode escape byte %#x.\n", nextByte);
    } else if (nextByte == 0x3a) {
        nextState = ThreeByte0F3AOpcodeState;
        DPRINTF(Decoder, "Found opcode escape byte %#x.\n", nextByte);
    } else {
        DPRINTF(Decoder, "Found two byte opcode %#x.\n", nextByte);
        emi.opcode.type = TwoByteOpcode;
        emi.opcode.op = nextByte;

        nextState = processOpcode(ImmediateTypeTwoByte, UsesModRMTwoByte);
    }
    return nextState;
}

// Load the third opcode byte and determine what immediate and/or ModRM is
// needed.
Decoder::State
Decoder::doThreeByte0F38OpcodeState(uint8_t nextByte)
{
    consumeByte();

    DPRINTF(Decoder, "Found three byte 0F38 opcode %#x.\n", nextByte);
    emi.opcode.type = ThreeByte0F38Opcode;
    emi.opcode.op = nextByte;

    return processOpcode(ImmediateTypeThreeByte0F38, UsesModRMThreeByte0F38);
}

// Load the third opcode byte and determine what immediate and/or ModRM is
// needed.
Decoder::State
Decoder::doThreeByte0F3AOpcodeState(uint8_t nextByte)
{
    consumeByte();

    DPRINTF(Decoder, "Found three byte 0F3A opcode %#x.\n", nextByte);
    emi.opcode.type = ThreeByte0F3AOpcode;
    emi.opcode.op = nextByte;

    return processOpcode(ImmediateTypeThreeByte0F3A, UsesModRMThreeByte0F3A);
}

// Generic opcode processing which determines the immediate size, and whether
// or not there's a modrm byte.
Decoder::State
Decoder::processOpcode(ByteTable &immTable, ByteTable &modrmTable,
                       bool addrSizedImm)
{
    State nextState = ErrorState;
    const uint8_t opcode = emi.opcode.op;

    //Figure out the effective operand size. This can be overriden to
    //a fixed value at the decoder level.
    int logOpSize;
    if (emi.rex.w)
        logOpSize = 3; // 64 bit operand size
    else if (emi.legacy.op)
        logOpSize = altOp;
    else
        logOpSize = defOp;

    //Set the actual op size
    emi.opSize = 1 << logOpSize;

    //Figure out the effective address size. This can be overriden to
    //a fixed value at the decoder level.
    int logAddrSize;
    if (emi.legacy.addr)
        logAddrSize = altAddr;
    else
        logAddrSize = defAddr;

    //Set the actual address size
    emi.addrSize = 1 << logAddrSize;

    //Figure out the effective stack width. This can be overriden to
    //a fixed value at the decoder level.
    emi.stackSize = 1 << stack;

    //Figure out how big of an immediate we'll retreive based
    //on the opcode.
    int immType = immTable[opcode];
    if (addrSizedImm)
        immediateSize = SizeTypeToSize[logAddrSize - 1][immType];
    else
        immediateSize = SizeTypeToSize[logOpSize - 1][immType];

    //Determine what to expect next
    if (modrmTable[opcode]) {
        nextState = ModRMState;
    } else {
        if (immediateSize) {
            nextState = ImmediateState;
        } else {
            instDone = true;
            nextState = ResetState;
        }
    }
    return nextState;
}

Decoder::State
Decoder::processExtendedOpcode(ByteTable &immTable)
{
    //Figure out the effective operand size. This can be overriden to
    //a fixed value at the decoder level.
    int logOpSize;
    if (emi.vex.second.w)
        logOpSize = 3; // 64 bit operand size
    else if (emi.vex.second.pp == 1)
        logOpSize = altOp;
    else
        logOpSize = defOp;

    //Set the actual op size
    emi.opSize = 1 << logOpSize;

    //Figure out the effective address size. This can be overriden to
    //a fixed value at the decoder level.
    int logAddrSize;
    if (emi.legacy.addr)
        logAddrSize = altAddr;
    else
        logAddrSize = defAddr;

    //Set the actual address size
    emi.addrSize = 1 << logAddrSize;

    //Figure out the effective stack width. This can be overriden to
    //a fixed value at the decoder level.
    emi.stackSize = 1 << stack;

    //Figure out how big of an immediate we'll retreive based
    //on the opcode.
    const uint8_t opcode = emi.opcode.op;

    if (emi.vex.zero == 0xc5 || emi.vex.zero == 0xc4) {
        int immType = immTable[opcode];
        // Assume 64-bit mode;
        immediateSize = SizeTypeToSize[2][immType];
    }

    if (opcode == 0x77) {
        instDone = true;
        return ResetState;
    }
    return ModRMState;
}

//Get the ModRM byte and determine what displacement, if any, there is.
//Also determine whether or not to get the SIB byte, displacement, or
//immediate next.
Decoder::State
Decoder::doModRMState(uint8_t nextByte)
{
    State nextState = ErrorState;
    ModRM modRM = nextByte;
    DPRINTF(Decoder, "Found modrm byte %#x.\n", nextByte);
    if (defOp == 1) {
        //figure out 16 bit displacement size
        if ((modRM.mod == 0 && modRM.rm == 6) || modRM.mod == 2)
            displacementSize = 2;
        else if (modRM.mod == 1)
            displacementSize = 1;
        else
            displacementSize = 0;
    } else {
        //figure out 32/64 bit displacement size
        if ((modRM.mod == 0 && modRM.rm == 5) || modRM.mod == 2)
            displacementSize = 4;
        else if (modRM.mod == 1)
            displacementSize = 1;
        else
            displacementSize = 0;
    }

    // The "test" instruction in group 3 needs an immediate, even though
    // the other instructions with the same actual opcode don't.
    if (emi.opcode.type == OneByteOpcode && (modRM.reg & 0x6) == 0) {
       if (emi.opcode.op == 0xF6)
           immediateSize = 1;
       else if (emi.opcode.op == 0xF7)
           immediateSize = (emi.opSize == 8) ? 4 : emi.opSize;
    }

    //If there's an SIB, get that next.
    //There is no SIB in 16 bit mode.
    if (modRM.rm == 4 && modRM.mod != 3) {
            // && in 32/64 bit mode)
        nextState = SIBState;
    } else if (displacementSize) {
        nextState = DisplacementState;
    } else if (immediateSize) {
        nextState = ImmediateState;
    } else {
        instDone = true;
        nextState = ResetState;
    }
    //The ModRM byte is consumed no matter what
    consumeByte();
    emi.modRM = modRM;
    return nextState;
}

//Get the SIB byte. We don't do anything with it at this point, other
//than storing it in the ExtMachInst. Determine if we need to get a
//displacement or immediate next.
Decoder::State
Decoder::doSIBState(uint8_t nextByte)
{
    State nextState = ErrorState;
    emi.sib = nextByte;
    DPRINTF(Decoder, "Found SIB byte %#x.\n", nextByte);
    consumeByte();
    if (emi.modRM.mod == 0 && emi.sib.base == 5)
        displacementSize = 4;
    if (displacementSize) {
        nextState = DisplacementState;
    } else if (immediateSize) {
        nextState = ImmediateState;
    } else {
        instDone = true;
        nextState = ResetState;
    }
    return nextState;
}

//Gather up the displacement, or at least as much of it
//as we can get.
Decoder::State
Decoder::doDisplacementState()
{
    State nextState = ErrorState;

    getImmediate(immediateCollected,
            emi.displacement,
            displacementSize);

    DPRINTF(Decoder, "Collecting %d byte displacement, got %d bytes.\n",
            displacementSize, immediateCollected);

    if (displacementSize == immediateCollected) {
        //Reset this for other immediates.
        immediateCollected = 0;
        //Sign extend the displacement
        switch(displacementSize)
        {
          case 1:
            emi.displacement = sext<8>(emi.displacement);
            break;
          case 2:
            emi.displacement = sext<16>(emi.displacement);
            break;
          case 4:
            emi.displacement = sext<32>(emi.displacement);
            break;
          default:
            panic("Undefined displacement size!\n");
        }
        DPRINTF(Decoder, "Collected displacement %#x.\n",
                emi.displacement);
        if (immediateSize) {
            nextState = ImmediateState;
        } else {
            instDone = true;
            nextState = ResetState;
        }

        emi.dispSize = displacementSize;
    }
    else
        nextState = DisplacementState;
    return nextState;
}

//Gather up the immediate, or at least as much of it
//as we can get
Decoder::State
Decoder::doImmediateState()
{
    State nextState = ErrorState;

    getImmediate(immediateCollected,
            emi.immediate,
            immediateSize);

    DPRINTF(Decoder, "Collecting %d byte immediate, got %d bytes.\n",
            immediateSize, immediateCollected);

    if (immediateSize == immediateCollected)
    {
        //Reset this for other immediates.
        immediateCollected = 0;

        //XXX Warning! The following is an observed pattern and might
        //not always be true!

        //Instructions which use 64 bit operands but 32 bit immediates
        //need to have the immediate sign extended to 64 bits.
        //Instructions which use true 64 bit immediates won't be
        //affected, and instructions that use true 32 bit immediates
        //won't notice.
        switch(immediateSize)
        {
          case 4:
            emi.immediate = sext<32>(emi.immediate);
            break;
          case 1:
            emi.immediate = sext<8>(emi.immediate);
        }

        DPRINTF(Decoder, "Collected immediate %#x.\n",
                emi.immediate);
        instDone = true;
        nextState = ResetState;
    }
    else
        nextState = ImmediateState;
    return nextState;
}

Decoder::InstBytes Decoder::dummy;
Decoder::InstCacheMap Decoder::instCacheMap;

StaticInstPtr
Decoder::decode(ExtMachInst mach_inst, Addr addr)
{
    DecodeCache::InstMap::iterator iter = instMap->find(mach_inst);
    if (iter != instMap->end())
        return iter->second;

    StaticInstPtr si = decodeInst(mach_inst);
    (*instMap)[mach_inst] = si;
    return si;
}

StaticInstPtr
Decoder::decode(PCState &nextPC)
{
    if (!instDone)
        return NULL;
    instDone = false;
    updateNPC(nextPC);

    StaticInstPtr &si = instBytes->si;
    if (si)
        return si;

    // We didn't match in the AddrMap, but we still populated an entry. Fix
    // up its byte masks.
    const int chunkSize = sizeof(MachInst);

    instBytes->lastOffset = offset;

    Addr firstBasePC = basePC - (instBytes->chunks.size() - 1) * chunkSize;
    Addr firstOffset = origPC - firstBasePC;
    Addr totalSize = instBytes->lastOffset - firstOffset +
        (instBytes->chunks.size() - 1) * chunkSize;
    int start = firstOffset;
    instBytes->masks.clear();

    while (totalSize) {
        int end = start + totalSize;
        end = (chunkSize < end) ? chunkSize : end;
        int size = end - start;
        int idx = instBytes->masks.size();

        MachInst maskVal = mask(size * 8) << (start * 8);
        assert(maskVal);

        instBytes->masks.push_back(maskVal);
        instBytes->chunks[idx] &= instBytes->masks[idx];
        totalSize -= size;
        start = 0;
    }

    si = decode(emi, origPC);
    return si;
}

}