blob: 578cba1055f67c2e537980166bf20225ee5f7f5b [file] [log] [blame]
/*
* Copyright (c) 2018 Metempsy Technology Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Jairo Balart
*/
#ifndef __DEV_ARM_GICV3_REDISTRIBUTOR_H__
#define __DEV_ARM_GICV3_REDISTRIBUTOR_H__
#include "base/addr_range.hh"
#include "dev/arm/gic_v3.hh"
#include "sim/serialize.hh"
class Gicv3CPUInterface;
class Gicv3Distributor;
class Gicv3Redistributor : public Serializable
{
private:
friend class Gicv3CPUInterface;
friend class Gicv3Distributor;
protected:
Gicv3 * gic;
Gicv3Distributor * distributor;
Gicv3CPUInterface * cpuInterface;
uint32_t cpuId;
/*
* GICv3 defines 2 contiguous 64KB frames for each redistributor.
* Order of frames must be RD_base, SGI_base.
*/
static const uint32_t RD_base = 0x0;
static const uint32_t SGI_base = 0x10000;
enum {
// Control Register
GICR_CTLR = RD_base + 0x0000,
// Implementer Identification Register
GICR_IIDR = RD_base + 0x0004,
// Type Register
GICR_TYPER = RD_base + 0x0008,
// Wake Register
GICR_WAKER = RD_base + 0x0014,
// Peripheral ID0 Register
GICR_PIDR0 = RD_base + 0xffe0,
// Peripheral ID1 Register
GICR_PIDR1 = RD_base + 0xffe4,
// Peripheral ID2 Register
GICR_PIDR2 = RD_base + 0xffe8,
// Peripheral ID3 Register
GICR_PIDR3 = RD_base + 0xffec,
// Peripheral ID4 Register
GICR_PIDR4 = RD_base + 0xffd0,
// Peripheral ID5 Register
GICR_PIDR5 = RD_base + 0xffd4,
// Peripheral ID6 Register
GICR_PIDR6 = RD_base + 0xffd8,
// Peripheral ID7 Register
GICR_PIDR7 = RD_base + 0xffdc,
};
static const uint32_t GICR_WAKER_ProcessorSleep = 1 << 1;
static const uint32_t GICR_WAKER_ChildrenAsleep = 1 << 2;
bool peInLowPowerState;
enum {
// Interrupt Group Register 0
GICR_IGROUPR0 = SGI_base + 0x0080,
// Interrupt Set-Enable Register 0
GICR_ISENABLER0 = SGI_base + 0x0100,
// Interrupt Clear-Enable Register 0
GICR_ICENABLER0 = SGI_base + 0x0180,
// Interrupt Set-Pending Register 0
GICR_ISPENDR0 = SGI_base + 0x0200,
// Interrupt Clear-Pending Register 0
GICR_ICPENDR0 = SGI_base + 0x0280,
// Interrupt Set-Active Register 0
GICR_ISACTIVER0 = SGI_base + 0x0300,
// Interrupt Clear-Active Register 0
GICR_ICACTIVER0 = SGI_base + 0x0380,
// SGI Configuration Register
GICR_ICFGR0 = SGI_base + 0x0c00,
// PPI Configuration Register
GICR_ICFGR1 = SGI_base + 0x0c04,
// Interrupt Group Modifier Register 0
GICR_IGRPMODR0 = SGI_base + 0x0d00,
// Non-secure Access Control Register
GICR_NSACR = SGI_base + 0x0e00,
};
// Interrupt Priority Registers
static const AddrRange GICR_IPRIORITYR;
// GIC physical LPI Redistributor register
enum {
// Set LPI Pending Register
GICR_SETLPIR = RD_base + 0x0040,
// Clear LPI Pending Register
GICR_CLRLPIR = RD_base + 0x0048,
//Redistributor Properties Base Address Register
GICR_PROPBASER = RD_base + 0x0070,
// Redistributor LPI Pending Table Base Address Register
GICR_PENDBASER = RD_base + 0x0078,
// Redistributor Invalidate LPI Register
GICR_INVLPIR = RD_base + 0x00A0,
// Redistributor Invalidate All Register
GICR_INVALLR = RD_base + 0x00B0,
// Redistributor Synchronize Register
GICR_SYNCR = RD_base + 0x00C0,
};
std::vector <uint8_t> irqGroup;
std::vector <bool> irqEnabled;
std::vector <bool> irqPending;
std::vector <bool> irqActive;
std::vector <uint8_t> irqPriority;
std::vector <Gicv3::IntTriggerType> irqConfig;
std::vector <uint8_t> irqGrpmod;
std::vector <uint8_t> irqNsacr;
bool DPG1S;
bool DPG1NS;
bool DPG0;
bool EnableLPIs;
Addr lpiConfigurationTablePtr;
uint8_t lpiIDBits;
Addr lpiPendingTablePtr;
BitUnion8(LPIConfigurationTableEntry)
Bitfield<7, 2> priority;
Bitfield<1> res1;
Bitfield<0> enable;
EndBitUnion(LPIConfigurationTableEntry)
std::vector<LPIConfigurationTableEntry> lpiConfigurationTable;
static const uint32_t GICR_CTLR_ENABLE_LPIS = 1 << 0;
static const uint32_t GICR_CTLR_DPG0 = 1 << 24;
static const uint32_t GICR_CTLR_DPG1NS = 1 << 25;
static const uint32_t GICR_CTLR_DPG1S = 1 << 26;
public:
/*
* GICv3 defines only 2 64K consecutive frames for the redistributor
* (RD_base and SGI_base) but we are using 2 extra 64K stride frames
* to match GICv4 that defines 4 64K consecutive frames for them.
* Note this must match with DTB/DTS GIC node definition and boot
* loader code.
*/
static const uint32_t ADDR_RANGE_SIZE = 0x40000;
static const uint32_t SMALLEST_LPI_ID = 8192;
void activateIRQ(uint32_t int_id);
bool canBeSelectedFor1toNInterrupt(Gicv3::GroupId group) const;
void deactivateIRQ(uint32_t int_id);
inline Gicv3CPUInterface *
getCPUInterface() const
{
return cpuInterface;
}
Gicv3::GroupId getIntGroup(int int_id) const;
Gicv3::IntStatus intStatus(uint32_t int_id) const;
void setClrLPI(uint64_t data, bool set);
void reset();
void sendSGI(uint32_t int_id, Gicv3::GroupId group, bool ns);
void serialize(CheckpointOut & cp) const override;
void unserialize(CheckpointIn & cp) override;
void update();
void updateAndInformCPUInterface();
public:
Gicv3Redistributor(Gicv3 * gic, uint32_t cpu_id);
void invalLpiConfig(uint32_t lpi_entry_index);
uint32_t getAffinity() const;
void init();
void initState();
uint64_t read(Addr addr, size_t size, bool is_secure_access);
void sendPPInt(uint32_t int_id);
void write(Addr addr, uint64_t data, size_t size, bool is_secure_access);
};
#endif //__DEV_ARM_GICV3_REDISTRIBUTOR_H__