| # Copyright (c) 2015 ARM Limited |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Copyright (c) 2005-2007 The Regents of The University of Michigan |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Authors: Nathan Binkert |
| |
| from m5.defines import buildEnv |
| from m5.SimObject import SimObject |
| from m5.params import * |
| from m5.proxy import * |
| from m5.objects.PciDevice import PciDevice |
| |
| class EtherObject(SimObject): |
| type = 'EtherObject' |
| abstract = True |
| cxx_header = "dev/net/etherobject.hh" |
| |
| class EtherLink(EtherObject): |
| type = 'EtherLink' |
| cxx_header = "dev/net/etherlink.hh" |
| int0 = SlavePort("interface 0") |
| int1 = SlavePort("interface 1") |
| delay = Param.Latency('0us', "packet transmit delay") |
| delay_var = Param.Latency('0ns', "packet transmit delay variability") |
| speed = Param.NetworkBandwidth('1Gbps', "link speed") |
| dump = Param.EtherDump(NULL, "dump object") |
| |
| class DistEtherLink(EtherObject): |
| type = 'DistEtherLink' |
| cxx_header = "dev/net/dist_etherlink.hh" |
| int0 = SlavePort("interface 0") |
| delay = Param.Latency('0us', "packet transmit delay") |
| delay_var = Param.Latency('0ns', "packet transmit delay variability") |
| speed = Param.NetworkBandwidth('1Gbps', "link speed") |
| dump = Param.EtherDump(NULL, "dump object") |
| dist_rank = Param.UInt32('0', "Rank of this gem5 process (dist run)") |
| dist_size = Param.UInt32('1', "Number of gem5 processes (dist run)") |
| sync_start = Param.Latency('5200000000000t', "first dist sync barrier") |
| sync_repeat = Param.Latency('10us', "dist sync barrier repeat") |
| server_name = Param.String('localhost', "Message server name") |
| server_port = Param.UInt32('2200', "Message server port") |
| is_switch = Param.Bool(False, "true if this a link in etherswitch") |
| dist_sync_on_pseudo_op = Param.Bool(False, "Start sync with pseudo_op") |
| num_nodes = Param.UInt32('2', "Number of simulate nodes") |
| |
| class EtherBus(EtherObject): |
| type = 'EtherBus' |
| cxx_header = "dev/net/etherbus.hh" |
| loopback = Param.Bool(True, "send packet back to the sending interface") |
| dump = Param.EtherDump(NULL, "dump object") |
| speed = Param.NetworkBandwidth('100Mbps', "bus speed in bits per second") |
| |
| class EtherSwitch(EtherObject): |
| type = 'EtherSwitch' |
| cxx_header = "dev/net/etherswitch.hh" |
| dump = Param.EtherDump(NULL, "dump object") |
| fabric_speed = Param.NetworkBandwidth('10Gbps', "switch fabric speed in bits " |
| "per second") |
| interface = VectorMasterPort("Ethernet Interface") |
| output_buffer_size = Param.MemorySize('1MB', "size of output port buffers") |
| delay = Param.Latency('0us', "packet transmit delay") |
| delay_var = Param.Latency('0ns', "packet transmit delay variability") |
| time_to_live = Param.Latency('10ms', "time to live of MAC address maping") |
| |
| class EtherTapBase(EtherObject): |
| type = 'EtherTapBase' |
| abstract = True |
| cxx_header = "dev/net/ethertap.hh" |
| bufsz = Param.Int(10000, "tap buffer size") |
| dump = Param.EtherDump(NULL, "dump object") |
| tap = SlavePort("Ethernet interface to connect to gem5's network") |
| |
| if buildEnv['USE_TUNTAP']: |
| class EtherTap(EtherTapBase): |
| type = 'EtherTap' |
| cxx_header = "dev/net/ethertap.hh" |
| tun_clone_device = Param.String('/dev/net/tun', |
| "Path to the tun clone device node") |
| tap_device_name = Param.String('gem5-tap', "Tap device name") |
| |
| class EtherTapStub(EtherTapBase): |
| type = 'EtherTapStub' |
| cxx_header = "dev/net/ethertap.hh" |
| port = Param.UInt16(3500, "Port helper should send packets to") |
| |
| class EtherDump(SimObject): |
| type = 'EtherDump' |
| cxx_header = "dev/net/etherdump.hh" |
| file = Param.String("dump file") |
| maxlen = Param.Int(96, "max portion of packet data to dump") |
| |
| class EtherDevice(PciDevice): |
| type = 'EtherDevice' |
| abstract = True |
| cxx_header = "dev/net/etherdevice.hh" |
| interface = MasterPort("Ethernet Interface") |
| |
| class IGbE(EtherDevice): |
| # Base class for two IGbE adapters listed above |
| type = 'IGbE' |
| cxx_header = "dev/net/i8254xGBe.hh" |
| hardware_address = Param.EthernetAddr(NextEthernetAddr, |
| "Ethernet Hardware Address") |
| rx_fifo_size = Param.MemorySize('384kB', "Size of the rx FIFO") |
| tx_fifo_size = Param.MemorySize('384kB', "Size of the tx FIFO") |
| rx_desc_cache_size = Param.Int(64, |
| "Number of enteries in the rx descriptor cache") |
| tx_desc_cache_size = Param.Int(64, |
| "Number of enteries in the rx descriptor cache") |
| VendorID = 0x8086 |
| SubsystemID = 0x1008 |
| SubsystemVendorID = 0x8086 |
| Status = 0x0000 |
| SubClassCode = 0x00 |
| ClassCode = 0x02 |
| ProgIF = 0x00 |
| BAR0 = 0x00000000 |
| BAR1 = 0x00000000 |
| BAR2 = 0x00000000 |
| BAR3 = 0x00000000 |
| BAR4 = 0x00000000 |
| BAR5 = 0x00000000 |
| MaximumLatency = 0x00 |
| MinimumGrant = 0xff |
| InterruptLine = 0x1e |
| InterruptPin = 0x01 |
| BAR0Size = '128kB' |
| wb_delay = Param.Latency('10ns', "delay before desc writeback occurs") |
| fetch_delay = Param.Latency('10ns', "delay before desc fetch occurs") |
| fetch_comp_delay = Param.Latency('10ns', "delay after desc fetch occurs") |
| wb_comp_delay = Param.Latency('10ns', "delay after desc wb occurs") |
| tx_read_delay = Param.Latency('0ns', "delay after tx dma read") |
| rx_write_delay = Param.Latency('0ns', "delay after rx dma read") |
| phy_pid = Param.UInt16("Phy PID that corresponds to device ID") |
| phy_epid = Param.UInt16("Phy EPID that corresponds to device ID") |
| |
| class IGbE_e1000(IGbE): |
| # Older Intel 8254x based gigabit ethernet adapter |
| # Uses Intel e1000 driver |
| DeviceID = 0x1075 |
| phy_pid = 0x02A8 |
| phy_epid = 0x0380 |
| |
| class IGbE_igb(IGbE): |
| # Newer Intel 8257x based gigabit ethernet adapter |
| # Uses Intel igb driver and in theory supports packet splitting and LRO |
| DeviceID = 0x10C9 |
| phy_pid = 0x0141 |
| phy_epid = 0x0CC0 |
| |
| class EtherDevBase(EtherDevice): |
| type = 'EtherDevBase' |
| abstract = True |
| cxx_header = "dev/net/etherdevice.hh" |
| |
| hardware_address = Param.EthernetAddr(NextEthernetAddr, |
| "Ethernet Hardware Address") |
| |
| dma_read_delay = Param.Latency('0us', "fixed delay for dma reads") |
| dma_read_factor = Param.Latency('0us', "multiplier for dma reads") |
| dma_write_delay = Param.Latency('0us', "fixed delay for dma writes") |
| dma_write_factor = Param.Latency('0us', "multiplier for dma writes") |
| |
| rx_delay = Param.Latency('1us', "Receive Delay") |
| tx_delay = Param.Latency('1us', "Transmit Delay") |
| rx_fifo_size = Param.MemorySize('512kB', "max size of rx fifo") |
| tx_fifo_size = Param.MemorySize('512kB', "max size of tx fifo") |
| |
| rx_filter = Param.Bool(True, "Enable Receive Filter") |
| intr_delay = Param.Latency('10us', "Interrupt propagation delay") |
| rx_thread = Param.Bool(False, "dedicated kernel thread for transmit") |
| tx_thread = Param.Bool(False, "dedicated kernel threads for receive") |
| rss = Param.Bool(False, "Receive Side Scaling") |
| |
| class NSGigE(EtherDevBase): |
| type = 'NSGigE' |
| cxx_header = "dev/net/ns_gige.hh" |
| |
| dma_data_free = Param.Bool(False, "DMA of Data is free") |
| dma_desc_free = Param.Bool(False, "DMA of Descriptors is free") |
| dma_no_allocate = Param.Bool(True, "Should we allocate cache on read") |
| |
| VendorID = 0x100B |
| DeviceID = 0x0022 |
| Status = 0x0290 |
| SubClassCode = 0x00 |
| ClassCode = 0x02 |
| ProgIF = 0x00 |
| BAR0 = 0x00000001 |
| BAR1 = 0x00000000 |
| BAR2 = 0x00000000 |
| BAR3 = 0x00000000 |
| BAR4 = 0x00000000 |
| BAR5 = 0x00000000 |
| MaximumLatency = 0x34 |
| MinimumGrant = 0xb0 |
| InterruptLine = 0x1e |
| InterruptPin = 0x01 |
| BAR0Size = '256B' |
| BAR1Size = '4kB' |
| |
| |
| |
| class Sinic(EtherDevBase): |
| type = 'Sinic' |
| cxx_class = 'Sinic::Device' |
| cxx_header = "dev/net/sinic.hh" |
| |
| rx_max_copy = Param.MemorySize('1514B', "rx max copy") |
| tx_max_copy = Param.MemorySize('16kB', "tx max copy") |
| rx_max_intr = Param.UInt32(10, "max rx packets per interrupt") |
| rx_fifo_threshold = Param.MemorySize('384kB', "rx fifo high threshold") |
| rx_fifo_low_mark = Param.MemorySize('128kB', "rx fifo low threshold") |
| tx_fifo_high_mark = Param.MemorySize('384kB', "tx fifo high threshold") |
| tx_fifo_threshold = Param.MemorySize('128kB', "tx fifo low threshold") |
| virtual_count = Param.UInt32(1, "Virtualized SINIC") |
| zero_copy_size = Param.UInt32(64, "Bytes to copy if below threshold") |
| zero_copy_threshold = Param.UInt32(256, |
| "Only zero copy above this threshold") |
| zero_copy = Param.Bool(False, "Zero copy receive") |
| delay_copy = Param.Bool(False, "Delayed copy transmit") |
| virtual_addr = Param.Bool(False, "Virtual addressing") |
| |
| VendorID = 0x1291 |
| DeviceID = 0x1293 |
| Status = 0x0290 |
| SubClassCode = 0x00 |
| ClassCode = 0x02 |
| ProgIF = 0x00 |
| BAR0 = 0x00000000 |
| BAR1 = 0x00000000 |
| BAR2 = 0x00000000 |
| BAR3 = 0x00000000 |
| BAR4 = 0x00000000 |
| BAR5 = 0x00000000 |
| MaximumLatency = 0x34 |
| MinimumGrant = 0xb0 |
| InterruptLine = 0x1e |
| InterruptPin = 0x01 |
| BAR0Size = '64kB' |
| |
| |