/*
 * Copyright (c) 2018 Inria
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Daniel Carvalho
 */

/**
 * @file
 * Definitions of a skewed associative placement policy.
 */

#include "mem/cache/tags/skewed_assoc.hh"

#include <vector>

#include "base/bitfield.hh"
#include "base/logging.hh"

SkewedAssoc::SkewedAssoc(const Params *p)
    : BaseSetAssoc(p), msbShift(floorLog2(numSets) - 1)
{
    if (assoc > NUM_SKEWING_FUNCTIONS) {
        warn_once("Associativity higher than number of skewing functions. " \
                  "Expect sub-optimal skewing.\n");
    }

    // Check if set is too big to do skewing. If using big sets, rewrite
    // skewing functions accordingly to make good use of the hashing function
    panic_if(setShift + 2 * (msbShift + 1) > 64, "Unsuported number of bits " \
             "for the skewing functions.");

    // We must have more than two sets, otherwise the MSB and LSB are the same
    // bit, and the xor of them will always be 0
    fatal_if(numSets <= 2, "The number of sets must be greater than 2");
}

Addr
SkewedAssoc::hash(const Addr addr) const
{
    // Get relevant bits
    const uint8_t lsb = bits<Addr>(addr, 0);
    const uint8_t msb = bits<Addr>(addr, msbShift);
    const uint8_t xor_bit = msb ^ lsb;

    // Shift-off LSB and set new MSB as xor of old LSB and MSB
    return insertBits<Addr, uint8_t>(addr >> 1, msbShift, xor_bit);
}

Addr
SkewedAssoc::dehash(const Addr addr) const
{
    // Get relevant bits. The original MSB is one bit away on the current MSB
    // (which is the XOR bit). The original LSB can be retrieved from inverting
    // the xor that generated the XOR bit.
    const uint8_t msb = bits<Addr>(addr, msbShift - 1);
    const uint8_t xor_bit = bits<Addr>(addr, msbShift);
    const uint8_t lsb = msb ^ xor_bit;

    // Remove current MSB (XOR bit), shift left and add LSB back
    const Addr addr_no_msb = mbits<Addr>(addr, msbShift - 1, 0);
    return insertBits<Addr, uint8_t>(addr_no_msb << 1, 0, lsb);
}

Addr
SkewedAssoc::skew(const Addr addr, const unsigned way) const
{
    // Assume an address of size A bits can be decomposed into
    // {addr3, addr2, addr1, addr0}, where:
    //   addr0 (M bits) = Block offset;
    //   addr1 (N bits) = Set bits in conventional cache;
    //   addr3 (A - M - 2*N bits), addr2 (N bits) = Tag bits.
    // We use addr1 and addr2, as proposed in the original paper
    Addr addr1 = bits<Addr>(addr, msbShift, 0);
    const Addr addr2 = bits<Addr>(addr, 2 * (msbShift + 1) - 1, msbShift + 1);

    // Select and apply skewing function for given way
    switch (way % NUM_SKEWING_FUNCTIONS) {
      case 0:
        addr1 = hash(addr1) ^ hash(addr2) ^ addr2;
        break;
      case 1:
        addr1 = hash(addr1) ^ hash(addr2) ^ addr1;
        break;
      case 2:
        addr1 = hash(addr1) ^ dehash(addr2) ^ addr2;
        break;
      case 3:
        addr1 = hash(addr1) ^ dehash(addr2) ^ addr1;
        break;
      case 4:
        addr1 = dehash(addr1) ^ hash(addr2) ^ addr2;
        break;
      case 5:
        addr1 = dehash(addr1) ^ hash(addr2) ^ addr1;
        break;
      case 6:
        addr1 = dehash(addr1) ^ dehash(addr2) ^ addr2;
        break;
      case 7:
        addr1 = dehash(addr1) ^ dehash(addr2) ^ addr1;
        break;
      default:
        panic("A skewing function has not been implemented for this way.");
    }

    // If we have more than 8 ways, just pile them up on hashes. This is not
    // the optimal solution, and can be improved by adding more skewing
    // functions to the previous selector
    for (int i = 0; i < way/NUM_SKEWING_FUNCTIONS; i++) {
        addr1 = hash(addr1);
    }

    return addr1;
}

Addr
SkewedAssoc::deskew(const Addr addr, const unsigned way) const
{
    // Get relevant bits of the addr
    Addr addr1 = bits<Addr>(addr, msbShift, 0);
    const Addr addr2 = bits<Addr>(addr, 2 * (msbShift + 1) - 1, msbShift + 1);

    // If we have more than NUM_SKEWING_FUNCTIONS ways, unpile the hashes
    if (way >= NUM_SKEWING_FUNCTIONS) {
        for (int i = 0; i < way/NUM_SKEWING_FUNCTIONS; i++) {
            addr1 = dehash(addr1);
        }
    }

    // Select and apply skewing function for given way
    switch (way % 8) {
      case 0:
        return dehash(addr1 ^ hash(addr2) ^ addr2);
      case 1:
        addr1 = addr1 ^ hash(addr2);
        for (int i = 0; i < msbShift; i++) {
            addr1 = hash(addr1);
        }
        return addr1;
      case 2:
        return dehash(addr1 ^ dehash(addr2) ^ addr2);
      case 3:
        addr1 = addr1 ^ dehash(addr2);
        for (int i = 0; i < msbShift; i++) {
            addr1 = hash(addr1);
        }
        return addr1;
      case 4:
        return hash(addr1 ^ hash(addr2) ^ addr2);
      case 5:
        addr1 = addr1 ^ hash(addr2);
        for (int i = 0; i <= msbShift; i++) {
            addr1 = hash(addr1);
        }
        return addr1;
      case 6:
        return hash(addr1 ^ dehash(addr2) ^ addr2);
      case 7:
        addr1 = addr1 ^ dehash(addr2);
        for (int i = 0; i <= msbShift; i++) {
            addr1 = hash(addr1);
        }
        return addr1;
      default:
        panic("A skewing function has not been implemented for this way.");
    }
}

unsigned
SkewedAssoc::extractSet(Addr addr, unsigned way) const
{
    return skew(addr >> setShift, way) & setMask;
}

Addr
SkewedAssoc::regenerateBlkAddr(const CacheBlk* blk) const
{
    const Addr addr = (blk->tag << (msbShift + 1)) | blk->set;
    const Addr set = deskew(addr, blk->way) & setMask;
    return (blk->tag << tagShift) | (set << setShift);
}

const std::vector<CacheBlk*>
SkewedAssoc::getPossibleLocations(Addr addr) const
{
    std::vector<CacheBlk*> locations;

    // Parse all ways
    for (int way = 0; way < assoc; ++way) {
        // Apply hash to get set, and get way entry in it
        locations.push_back(sets[extractSet(addr, way)].blks[way]);
    }

    return locations;
}

CacheBlk*
SkewedAssoc::findBlock(Addr addr, bool is_secure) const
{
    // Extract block tag
    Addr tag = extractTag(addr);

    // Find possible locations for the given address
    std::vector<CacheBlk*> locations = getPossibleLocations(addr);

    // Search for block
    for (const auto& blk : locations) {
        if ((blk->tag == tag) && blk->isValid() &&
            (blk->isSecure() == is_secure)) {
            return blk;
        }
    }

    // Did not find block
    return nullptr;
}

SkewedAssoc *
SkewedAssocParams::create()
{
    return new SkewedAssoc(this);
}