# Copyright (c) 2010 Advanced Micro Devices, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Brad Beckmann

from m5.params import *
from m5.objects import *

from BaseTopology import SimpleTopology

# Creates a Mesh topology with 4 directories, one at each corner.
# One L1 (and L2, depending on the protocol) are connected to each router.
# XY routing is enforced (using link weights) to guarantee deadlock freedom.

class MeshDirCorners_XY(SimpleTopology):
    description='MeshDirCorners_XY'

    def __init__(self, controllers):
        self.nodes = controllers

    def makeTopology(self, options, network, IntLink, ExtLink, Router):
        nodes = self.nodes

        num_routers = options.num_cpus
        num_rows = options.mesh_rows

        # default values for link latency and router latency.
        # Can be over-ridden on a per link/router basis
        link_latency = options.link_latency # used by simple and garnet
        router_latency = options.router_latency # only used by garnet


        # First determine which nodes are cache cntrls vs. dirs vs. dma
        cache_nodes = []
        dir_nodes = []
        dma_nodes = []
        for node in nodes:
            if node.type == 'L1Cache_Controller' or \
            node.type == 'L2Cache_Controller':
                cache_nodes.append(node)
            elif node.type == 'Directory_Controller':
                dir_nodes.append(node)
            elif node.type == 'DMA_Controller':
                dma_nodes.append(node)

        # Obviously the number or rows must be <= the number of routers
        # and evenly divisible.  Also the number of caches must be a
        # multiple of the number of routers and the number of directories
        # must be four.
        assert(num_rows > 0 and num_rows <= num_routers)
        num_columns = int(num_routers / num_rows)
        assert(num_columns * num_rows == num_routers)
        caches_per_router, remainder = divmod(len(cache_nodes), num_routers)
        assert(remainder == 0)
        assert(len(dir_nodes) == 4)

        # Create the routers in the mesh
        routers = [Router(router_id=i, latency = router_latency) \
            for i in range(num_routers)]
        network.routers = routers

        # link counter to set unique link ids
        link_count = 0

        # Connect each cache controller to the appropriate router
        ext_links = []
        for (i, n) in enumerate(cache_nodes):
            cntrl_level, router_id = divmod(i, num_routers)
            assert(cntrl_level < caches_per_router)
            ext_links.append(ExtLink(link_id=link_count, ext_node=n,
                                    int_node=routers[router_id],
                                    latency = link_latency))
            link_count += 1

        # Connect the dir nodes to the corners.
        ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[0],
                                int_node=routers[0],
                                latency = link_latency))
        link_count += 1
        ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[1],
                                int_node=routers[num_columns - 1],
                                latency = link_latency))
        link_count += 1
        ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[2],
                                int_node=routers[num_routers - num_columns],
                                latency = link_latency))
        link_count += 1
        ext_links.append(ExtLink(link_id=link_count, ext_node=dir_nodes[3],
                                int_node=routers[num_routers - 1],
                                latency = link_latency))
        link_count += 1

        # Connect the dma nodes to router 0.  These should only be DMA nodes.
        for (i, node) in enumerate(dma_nodes):
            assert(node.type == 'DMA_Controller')
            ext_links.append(ExtLink(link_id=link_count, ext_node=node,
                                     int_node=routers[0],
                                     latency = link_latency))

        network.ext_links = ext_links

        # Create the mesh links.
        int_links = []

        # East output to West input links (weight = 1)
        for row in range(num_rows):
            for col in range(num_columns):
                if (col + 1 < num_columns):
                    east_out = col + (row * num_columns)
                    west_in = (col + 1) + (row * num_columns)
                    int_links.append(IntLink(link_id=link_count,
                                             src_node=routers[east_out],
                                             dst_node=routers[west_in],
                                             src_outport="East",
                                             dst_inport="West",
                                             latency = link_latency,
                                             weight=1))
                    link_count += 1

        # West output to East input links (weight = 1)
        for row in range(num_rows):
            for col in range(num_columns):
                if (col + 1 < num_columns):
                    east_in = col + (row * num_columns)
                    west_out = (col + 1) + (row * num_columns)
                    int_links.append(IntLink(link_id=link_count,
                                             src_node=routers[west_out],
                                             dst_node=routers[east_in],
                                             src_outport="West",
                                             dst_inport="East",
                                             latency = link_latency,
                                             weight=1))
                    link_count += 1

        # North output to South input links (weight = 2)
        for col in range(num_columns):
            for row in range(num_rows):
                if (row + 1 < num_rows):
                    north_out = col + (row * num_columns)
                    south_in = col + ((row + 1) * num_columns)
                    int_links.append(IntLink(link_id=link_count,
                                             src_node=routers[north_out],
                                             dst_node=routers[south_in],
                                             src_outport="North",
                                             dst_inport="South",
                                             latency = link_latency,
                                             weight=2))
                    link_count += 1

        # South output to North input links (weight = 2)
        for col in range(num_columns):
            for row in range(num_rows):
                if (row + 1 < num_rows):
                    north_in = col + (row * num_columns)
                    south_out = col + ((row + 1) * num_columns)
                    int_links.append(IntLink(link_id=link_count,
                                             src_node=routers[south_out],
                                             dst_node=routers[north_in],
                                             src_outport="South",
                                             dst_inport="North",
                                             latency = link_latency,
                                             weight=2))
                    link_count += 1


        network.int_links = int_links