src/dev/storage/ide_ctrl.cc - testing/jenkins-gem5-prod - Git at Google

 /*
  * Copyright (c) 2013 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
  * not be construed as granting a license to any other intellectual
  * property including but not limited to intellectual property relating
  * to a hardware implementation of the functionality of the software
  * licensed hereunder.  You may use the software subject to the license
  * terms below provided that you ensure that this notice is replicated
  * unmodified and in its entirety in all distributions of the software,
  * modified or unmodified, in source code or in binary form.
  *
  * Copyright (c) 2004-2005 The Regents of The University of Michigan
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met: redistributions of source code must retain the above copyright
  * notice, this list of conditions and the following disclaimer;
  * redistributions in binary form must reproduce the above copyright
  * notice, this list of conditions and the following disclaimer in the
  * documentation and/or other materials provided with the distribution;
  * neither the name of the copyright holders nor the names of its
  * contributors may be used to endorse or promote products derived from
  * this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Authors: Andrew Schultz
  *          Ali Saidi
  *          Miguel Serrano
  */

 #include "dev/storage/ide_ctrl.hh"

 #include <string>

 #include "cpu/intr_control.hh"
 #include "debug/IdeCtrl.hh"
 #include "dev/storage/ide_disk.hh"
 #include "mem/packet.hh"
 #include "mem/packet_access.hh"
 #include "params/IdeController.hh"
 #include "sim/byteswap.hh"

 // clang complains about std::set being overloaded with Packet::set if
 // we open up the entire namespace std
 using std::string;

 // Bus master IDE registers
 enum BMIRegOffset {
     BMICommand = 0x0,
     BMIStatus = 0x2,
     BMIDescTablePtr = 0x4
 };

 // PCI config space registers
 enum ConfRegOffset {
     PrimaryTiming = 0x40,
     SecondaryTiming = 0x42,
     DeviceTiming = 0x44,
     UDMAControl = 0x48,
     UDMATiming = 0x4A,
     IDEConfig = 0x54
 };

 static const uint16_t timeRegWithDecodeEn = 0x8000;

 IdeController::Channel::Channel(
         string newName, Addr _cmdSize, Addr _ctrlSize) :
     _name(newName),
     cmdAddr(0), cmdSize(_cmdSize), ctrlAddr(0), ctrlSize(_ctrlSize),
     master(NULL), slave(NULL), selected(NULL)
 {
     bmiRegs.reset();
     bmiRegs.status.dmaCap0 = 1;
     bmiRegs.status.dmaCap1 = 1;
 }

 IdeController::Channel::~Channel()
 {
 }

 IdeController::IdeController(Params *p)
     : PciDevice(p), primary(name() + ".primary", BARSize[0], BARSize[1]),
     secondary(name() + ".secondary", BARSize[2], BARSize[3]),
     bmiAddr(0), bmiSize(BARSize[4]),
     primaryTiming(htole(timeRegWithDecodeEn)),
     secondaryTiming(htole(timeRegWithDecodeEn)),
     deviceTiming(0), udmaControl(0), udmaTiming(0), ideConfig(0),
     ioEnabled(false), bmEnabled(false),
     ioShift(p->io_shift), ctrlOffset(p->ctrl_offset)
 {

     // Assign the disks to channels
     for (int i = 0; i < params()->disks.size(); i++) {
         if (!params()->disks[i])
             continue;
         switch (i) {
           case 0:
             primary.master = params()->disks[0];
             break;
           case 1:
             primary.slave = params()->disks[1];
             break;
           case 2:
             secondary.master = params()->disks[2];
             break;
           case 3:
             secondary.slave = params()->disks[3];
             break;
           default:
             panic("IDE controllers support a maximum "
                   "of 4 devices attached!\n");
         }
         params()->disks[i]->setController(this);
     }

     primary.select(false);
     secondary.select(false);

     if ((BARAddrs[0] & ~BAR_IO_MASK) && (!legacyIO[0] || ioShift)) {
         primary.cmdAddr = BARAddrs[0];  primary.cmdSize = BARSize[0];
         primary.ctrlAddr = BARAddrs[1]; primary.ctrlSize = BARSize[1];
     }
     if ((BARAddrs[2] & ~BAR_IO_MASK) && (!legacyIO[2] || ioShift)) {
         secondary.cmdAddr = BARAddrs[2];  secondary.cmdSize = BARSize[2];
         secondary.ctrlAddr = BARAddrs[3]; secondary.ctrlSize = BARSize[3];
     }

     ioEnabled = (config.command & htole(PCI_CMD_IOSE));
     bmEnabled = (config.command & htole(PCI_CMD_BME));
 }

 bool
 IdeController::isDiskSelected(IdeDisk *diskPtr)
 {
     return (primary.selected == diskPtr || secondary.selected == diskPtr);
 }

 void
 IdeController::intrPost()
 {
     primary.bmiRegs.status.intStatus = 1;
     PciDevice::intrPost();
 }

 void
 IdeController::setDmaComplete(IdeDisk *disk)
 {
     Channel *channel;
     if (disk == primary.master || disk == primary.slave) {
         channel = &primary;
     } else if (disk == secondary.master || disk == secondary.slave) {
         channel = &secondary;
     } else {
         panic("Unable to find disk based on pointer %#x\n", disk);
     }

     channel->bmiRegs.command.startStop = 0;
     channel->bmiRegs.status.active = 0;
     channel->bmiRegs.status.intStatus = 1;
 }

 Tick
 IdeController::readConfig(PacketPtr pkt)
 {
     int offset = pkt->getAddr() & PCI_CONFIG_SIZE;
     if (offset < PCI_DEVICE_SPECIFIC) {
         return PciDevice::readConfig(pkt);
     }

     switch (pkt->getSize()) {
       case sizeof(uint8_t):
         switch (offset) {
           case DeviceTiming:
             pkt->setLE<uint8_t>(deviceTiming);
             break;
           case UDMAControl:
             pkt->setLE<uint8_t>(udmaControl);
             break;
           case PrimaryTiming + 1:
             pkt->setLE<uint8_t>(bits(htole(primaryTiming), 15, 8));
             break;
           case SecondaryTiming + 1:
             pkt->setLE<uint8_t>(bits(htole(secondaryTiming), 15, 8));
             break;
           case IDEConfig:
             pkt->setLE<uint8_t>(bits(htole(ideConfig), 7, 0));
             break;
           case IDEConfig + 1:
             pkt->setLE<uint8_t>(bits(htole(ideConfig), 15, 8));
             break;
           default:
             panic("Invalid PCI configuration read for size 1 at offset: %#x!\n",
                     offset);
         }
         DPRINTF(IdeCtrl, "PCI read offset: %#x size: 1 data: %#x\n", offset,
                 (uint32_t)pkt->getLE<uint8_t>());
         break;
       case sizeof(uint16_t):
         switch (offset) {
           case UDMAControl:
             pkt->setLE<uint16_t>(udmaControl);
             break;
           case PrimaryTiming:
             pkt->setLE<uint16_t>(primaryTiming);
             break;
           case SecondaryTiming:
             pkt->setLE<uint16_t>(secondaryTiming);
             break;
           case UDMATiming:
             pkt->setLE<uint16_t>(udmaTiming);
             break;
           case IDEConfig:
             pkt->setLE<uint16_t>(ideConfig);
             break;
           default:
             panic("Invalid PCI configuration read for size 2 offset: %#x!\n",
                     offset);
         }
         DPRINTF(IdeCtrl, "PCI read offset: %#x size: 2 data: %#x\n", offset,
                 (uint32_t)pkt->getLE<uint16_t>());
         break;
       case sizeof(uint32_t):
         switch (offset) {
           case PrimaryTiming:
             pkt->setLE<uint32_t>(primaryTiming);
             break;
           case IDEConfig:
             pkt->setLE<uint32_t>(ideConfig);
             break;
           default:
             panic("No 32bit reads implemented for this device.");
         }
         DPRINTF(IdeCtrl, "PCI read offset: %#x size: 4 data: %#x\n", offset,
                 (uint32_t)pkt->getLE<uint32_t>());
         break;
       default:
         panic("invalid access size(?) for PCI configspace!\n");
     }
     pkt->makeAtomicResponse();
     return configDelay;
 }


 Tick
 IdeController::writeConfig(PacketPtr pkt)
 {
     int offset = pkt->getAddr() & PCI_CONFIG_SIZE;
     if (offset < PCI_DEVICE_SPECIFIC) {
         PciDevice::writeConfig(pkt);
     } else {
         switch (pkt->getSize()) {
           case sizeof(uint8_t):
             switch (offset) {
               case DeviceTiming:
                 deviceTiming = pkt->getLE<uint8_t>();
                 break;
               case UDMAControl:
                 udmaControl = pkt->getLE<uint8_t>();
                 break;
               case IDEConfig:
                 replaceBits(ideConfig, 7, 0, pkt->getLE<uint8_t>());
                 break;
               case IDEConfig + 1:
                 replaceBits(ideConfig, 15, 8, pkt->getLE<uint8_t>());
                 break;
               default:
                 panic("Invalid PCI configuration write "
                         "for size 1 offset: %#x!\n", offset);
             }
             DPRINTF(IdeCtrl, "PCI write offset: %#x size: 1 data: %#x\n",
                     offset, (uint32_t)pkt->getLE<uint8_t>());
             break;
           case sizeof(uint16_t):
             switch (offset) {
               case UDMAControl:
                 udmaControl = pkt->getLE<uint16_t>();
                 break;
               case PrimaryTiming:
                 primaryTiming = pkt->getLE<uint16_t>();
                 break;
               case SecondaryTiming:
                 secondaryTiming = pkt->getLE<uint16_t>();
                 break;
               case UDMATiming:
                 udmaTiming = pkt->getLE<uint16_t>();
                 break;
               case IDEConfig:
                 ideConfig = pkt->getLE<uint16_t>();
                 break;
               default:
                 panic("Invalid PCI configuration write "
                         "for size 2 offset: %#x!\n",
                         offset);
             }
             DPRINTF(IdeCtrl, "PCI write offset: %#x size: 2 data: %#x\n",
                     offset, (uint32_t)pkt->getLE<uint16_t>());
             break;
           case sizeof(uint32_t):
             switch (offset) {
               case PrimaryTiming:
                 primaryTiming = pkt->getLE<uint32_t>();
                 break;
               case IDEConfig:
                 ideConfig = pkt->getLE<uint32_t>();
                 break;
               default:
                 panic("Write of unimplemented PCI config. register: %x\n", offset);
             }
             break;
           default:
             panic("invalid access size(?) for PCI configspace!\n");
         }
         pkt->makeAtomicResponse();
     }

     /* Trap command register writes and enable IO/BM as appropriate as well as
      * BARs. */
     switch(offset) {
       case PCI0_BASE_ADDR0:
         if (BARAddrs[0] != 0)
             primary.cmdAddr = BARAddrs[0];
         break;

       case PCI0_BASE_ADDR1:
         if (BARAddrs[1] != 0)
             primary.ctrlAddr = BARAddrs[1];
         break;

       case PCI0_BASE_ADDR2:
         if (BARAddrs[2] != 0)
             secondary.cmdAddr = BARAddrs[2];
         break;

       case PCI0_BASE_ADDR3:
         if (BARAddrs[3] != 0)
             secondary.ctrlAddr = BARAddrs[3];
         break;

       case PCI0_BASE_ADDR4:
         if (BARAddrs[4] != 0)
             bmiAddr = BARAddrs[4];
         break;

       case PCI_COMMAND:
         DPRINTF(IdeCtrl, "Writing to PCI Command val: %#x\n", config.command);
         ioEnabled = (config.command & htole(PCI_CMD_IOSE));
         bmEnabled = (config.command & htole(PCI_CMD_BME));
         break;
     }
     return configDelay;
 }

 void
 IdeController::Channel::accessCommand(Addr offset,
         int size, uint8_t *data, bool read)
 {
     const Addr SelectOffset = 6;
     const uint8_t SelectDevBit = 0x10;

     if (!read && offset == SelectOffset)
         select(*data & SelectDevBit);

     if (selected == NULL) {
         assert(size == sizeof(uint8_t));
         *data = 0;
     } else if (read) {
         selected->readCommand(offset, size, data);
     } else {
         selected->writeCommand(offset, size, data);
     }
 }

 void
 IdeController::Channel::accessControl(Addr offset,
         int size, uint8_t *data, bool read)
 {
     if (selected == NULL) {
         assert(size == sizeof(uint8_t));
         *data = 0;
     } else if (read) {
         selected->readControl(offset, size, data);
     } else {
         selected->writeControl(offset, size, data);
     }
 }

 void
 IdeController::Channel::accessBMI(Addr offset,
         int size, uint8_t *data, bool read)
 {
     assert(offset + size <= sizeof(BMIRegs));
     if (read) {
         memcpy(data, (uint8_t *)&bmiRegs + offset, size);
     } else {
         switch (offset) {
           case BMICommand:
             {
                 if (size != sizeof(uint8_t))
                     panic("Invalid BMIC write size: %x\n", size);

                 BMICommandReg oldVal = bmiRegs.command;
                 BMICommandReg newVal = *data;

                 // if a DMA transfer is in progress, R/W control cannot change
                 if (oldVal.startStop && oldVal.rw != newVal.rw)
                     oldVal.rw = newVal.rw;

                 if (oldVal.startStop != newVal.startStop) {
                     if (selected == NULL)
                         panic("DMA start for disk which does not exist\n");

                     if (oldVal.startStop) {
                         DPRINTF(IdeCtrl, "Stopping DMA transfer\n");
                         bmiRegs.status.active = 0;

                         selected->abortDma();
                     } else {
                         DPRINTF(IdeCtrl, "Starting DMA transfer\n");
                         bmiRegs.status.active = 1;

                         selected->startDma(letoh(bmiRegs.bmidtp));
                     }
                 }

                 bmiRegs.command = newVal;
             }
             break;
           case BMIStatus:
             {
                 if (size != sizeof(uint8_t))
                     panic("Invalid BMIS write size: %x\n", size);

                 BMIStatusReg oldVal = bmiRegs.status;
                 BMIStatusReg newVal = *data;

                 // the BMIDEA bit is read only
                 newVal.active = oldVal.active;

                 // to reset (set 0) IDEINTS and IDEDMAE, write 1 to each
                 if ((oldVal.intStatus == 1) && (newVal.intStatus == 1)) {
                     newVal.intStatus = 0; // clear the interrupt?
                 } else {
                     // Assigning two bitunion fields to each other does not
                     // work as intended, so we need to use this temporary variable
                     // to get around the bug.
                     uint8_t tmp = oldVal.intStatus;
                     newVal.intStatus = tmp;
                 }
                 if ((oldVal.dmaError == 1) && (newVal.dmaError == 1)) {
                     newVal.dmaError = 0;
                 } else {
                     uint8_t tmp = oldVal.dmaError;
                     newVal.dmaError = tmp;
                 }

                 bmiRegs.status = newVal;
             }
             break;
           case BMIDescTablePtr:
             if (size != sizeof(uint32_t))
                 panic("Invalid BMIDTP write size: %x\n", size);
             bmiRegs.bmidtp = htole(*(uint32_t *)data & ~0x3);
             break;
           default:
             if (size != sizeof(uint8_t) && size != sizeof(uint16_t) &&
                     size != sizeof(uint32_t))
                 panic("IDE controller write of invalid write size: %x\n", size);
             memcpy((uint8_t *)&bmiRegs + offset, data, size);
         }
     }
 }

 void
 IdeController::dispatchAccess(PacketPtr pkt, bool read)
 {
     if (pkt->getSize() != 1 && pkt->getSize() != 2 && pkt->getSize() !=4)
          panic("Bad IDE read size: %d\n", pkt->getSize());

     if (!ioEnabled) {
         pkt->makeAtomicResponse();
         DPRINTF(IdeCtrl, "io not enabled\n");
         return;
     }

     Addr addr = pkt->getAddr();
     int size = pkt->getSize();
     uint8_t *dataPtr = pkt->getPtr<uint8_t>();

     if (addr >= primary.cmdAddr &&
             addr < (primary.cmdAddr + primary.cmdSize)) {
         addr -= primary.cmdAddr;
         // linux may have shifted the address by ioShift,
         // here we shift it back, similarly for ctrlOffset.
         addr >>= ioShift;
         primary.accessCommand(addr, size, dataPtr, read);
     } else if (addr >= primary.ctrlAddr &&
                addr < (primary.ctrlAddr + primary.ctrlSize)) {
         addr -= primary.ctrlAddr;
         addr += ctrlOffset;
         primary.accessControl(addr, size, dataPtr, read);
     } else if (addr >= secondary.cmdAddr &&
                addr < (secondary.cmdAddr + secondary.cmdSize)) {
         addr -= secondary.cmdAddr;
         secondary.accessCommand(addr, size, dataPtr, read);
     } else if (addr >= secondary.ctrlAddr &&
                addr < (secondary.ctrlAddr + secondary.ctrlSize)) {
         addr -= secondary.ctrlAddr;
         secondary.accessControl(addr, size, dataPtr, read);
     } else if (addr >= bmiAddr && addr < (bmiAddr + bmiSize)) {
         if (!read && !bmEnabled)
             return;
         addr -= bmiAddr;
         if (addr < sizeof(Channel::BMIRegs)) {
             primary.accessBMI(addr, size, dataPtr, read);
         } else {
             addr -= sizeof(Channel::BMIRegs);
             secondary.accessBMI(addr, size, dataPtr, read);
         }
     } else {
         panic("IDE controller access to invalid address: %#x\n", addr);
     }

 #ifndef NDEBUG
     uint32_t data;
     if (pkt->getSize() == 1)
         data = pkt->getLE<uint8_t>();
     else if (pkt->getSize() == 2)
         data = pkt->getLE<uint16_t>();
     else
         data = pkt->getLE<uint32_t>();
     DPRINTF(IdeCtrl, "%s from offset: %#x size: %#x data: %#x\n",
             read ? "Read" : "Write", pkt->getAddr(), pkt->getSize(), data);
 #endif

     pkt->makeAtomicResponse();
 }

 Tick
 IdeController::read(PacketPtr pkt)
 {
     dispatchAccess(pkt, true);
     return pioDelay;
 }

 Tick
 IdeController::write(PacketPtr pkt)
 {
     dispatchAccess(pkt, false);
     return pioDelay;
 }

 void
 IdeController::serialize(CheckpointOut &cp) const
 {
     // Serialize the PciDevice base class
     PciDevice::serialize(cp);

     // Serialize channels
     primary.serialize("primary", cp);
     secondary.serialize("secondary", cp);

     // Serialize config registers
     SERIALIZE_SCALAR(primaryTiming);
     SERIALIZE_SCALAR(secondaryTiming);
     SERIALIZE_SCALAR(deviceTiming);
     SERIALIZE_SCALAR(udmaControl);
     SERIALIZE_SCALAR(udmaTiming);
     SERIALIZE_SCALAR(ideConfig);

     // Serialize internal state
     SERIALIZE_SCALAR(ioEnabled);
     SERIALIZE_SCALAR(bmEnabled);
     SERIALIZE_SCALAR(bmiAddr);
     SERIALIZE_SCALAR(bmiSize);
 }

 void
 IdeController::Channel::serialize(const std::string &base,
                                   CheckpointOut &cp) const
 {
     paramOut(cp, base + ".cmdAddr", cmdAddr);
     paramOut(cp, base + ".cmdSize", cmdSize);
     paramOut(cp, base + ".ctrlAddr", ctrlAddr);
     paramOut(cp, base + ".ctrlSize", ctrlSize);
     uint8_t command = bmiRegs.command;
     paramOut(cp, base + ".bmiRegs.command", command);
     paramOut(cp, base + ".bmiRegs.reserved0", bmiRegs.reserved0);
     uint8_t status = bmiRegs.status;
     paramOut(cp, base + ".bmiRegs.status", status);
     paramOut(cp, base + ".bmiRegs.reserved1", bmiRegs.reserved1);
     paramOut(cp, base + ".bmiRegs.bmidtp", bmiRegs.bmidtp);
     paramOut(cp, base + ".selectBit", selectBit);
 }

 void
 IdeController::unserialize(CheckpointIn &cp)
 {
     // Unserialize the PciDevice base class
     PciDevice::unserialize(cp);

     // Unserialize channels
     primary.unserialize("primary", cp);
     secondary.unserialize("secondary", cp);

     // Unserialize config registers
     UNSERIALIZE_SCALAR(primaryTiming);
     UNSERIALIZE_SCALAR(secondaryTiming);
     UNSERIALIZE_SCALAR(deviceTiming);
     UNSERIALIZE_SCALAR(udmaControl);
     UNSERIALIZE_SCALAR(udmaTiming);
     UNSERIALIZE_SCALAR(ideConfig);

     // Unserialize internal state
     UNSERIALIZE_SCALAR(ioEnabled);
     UNSERIALIZE_SCALAR(bmEnabled);
     UNSERIALIZE_SCALAR(bmiAddr);
     UNSERIALIZE_SCALAR(bmiSize);
 }

 void
 IdeController::Channel::unserialize(const std::string &base, CheckpointIn &cp)
 {
     paramIn(cp, base + ".cmdAddr", cmdAddr);
     paramIn(cp, base + ".cmdSize", cmdSize);
     paramIn(cp, base + ".ctrlAddr", ctrlAddr);
     paramIn(cp, base + ".ctrlSize", ctrlSize);
     uint8_t command;
     paramIn(cp, base +".bmiRegs.command", command);
     bmiRegs.command = command;
     paramIn(cp, base + ".bmiRegs.reserved0", bmiRegs.reserved0);
     uint8_t status;
     paramIn(cp, base + ".bmiRegs.status", status);
     bmiRegs.status = status;
     paramIn(cp, base + ".bmiRegs.reserved1", bmiRegs.reserved1);
     paramIn(cp, base + ".bmiRegs.bmidtp", bmiRegs.bmidtp);
     paramIn(cp, base + ".selectBit", selectBit);
     select(selectBit);
 }

 IdeController *
 IdeControllerParams::create()
 {
     return new IdeController(this);
 }
	/*
	* Copyright (c) 2013 ARM Limited
	* All rights reserved
	*
	* The license below extends only to copyright in the software and shall
	* not be construed as granting a license to any other intellectual
	* property including but not limited to intellectual property relating
	* to a hardware implementation of the functionality of the software
	* licensed hereunder. You may use the software subject to the license
	* terms below provided that you ensure that this notice is replicated
	* unmodified and in its entirety in all distributions of the software,
	* modified or unmodified, in source code or in binary form.
	*
	* Copyright (c) 2004-2005 The Regents of The University of Michigan
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met: redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer;
	* redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution;
	* neither the name of the copyright holders nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* Authors: Andrew Schultz
	* Ali Saidi
	* Miguel Serrano
	*/

	#include "dev/storage/ide_ctrl.hh"

	#include <string>

	#include "cpu/intr_control.hh"
	#include "debug/IdeCtrl.hh"
	#include "dev/storage/ide_disk.hh"
	#include "mem/packet.hh"
	#include "mem/packet_access.hh"
	#include "params/IdeController.hh"
	#include "sim/byteswap.hh"

	// clang complains about std::set being overloaded with Packet::set if
	// we open up the entire namespace std
	using std::string;

	// Bus master IDE registers
	enum BMIRegOffset {
	BMICommand = 0x0,
	BMIStatus = 0x2,
	BMIDescTablePtr = 0x4
	};

	// PCI config space registers
	enum ConfRegOffset {
	PrimaryTiming = 0x40,
	SecondaryTiming = 0x42,
	DeviceTiming = 0x44,
	UDMAControl = 0x48,
	UDMATiming = 0x4A,
	IDEConfig = 0x54
	};

	static const uint16_t timeRegWithDecodeEn = 0x8000;

	IdeController::Channel::Channel(
	string newName, Addr _cmdSize, Addr _ctrlSize) :
	_name(newName),
	cmdAddr(0), cmdSize(_cmdSize), ctrlAddr(0), ctrlSize(_ctrlSize),
	master(NULL), slave(NULL), selected(NULL)
	{
	bmiRegs.reset();
	bmiRegs.status.dmaCap0 = 1;
	bmiRegs.status.dmaCap1 = 1;
	}

	IdeController::Channel::~Channel()
	{
	}

	IdeController::IdeController(Params *p)
	: PciDevice(p), primary(name() + ".primary", BARSize[0], BARSize[1]),
	secondary(name() + ".secondary", BARSize[2], BARSize[3]),
	bmiAddr(0), bmiSize(BARSize[4]),
	primaryTiming(htole(timeRegWithDecodeEn)),
	secondaryTiming(htole(timeRegWithDecodeEn)),
	deviceTiming(0), udmaControl(0), udmaTiming(0), ideConfig(0),
	ioEnabled(false), bmEnabled(false),
	ioShift(p->io_shift), ctrlOffset(p->ctrl_offset)
	{

	// Assign the disks to channels
	for (int i = 0; i < params()->disks.size(); i++) {
	if (!params()->disks[i])
	continue;
	switch (i) {
	case 0:
	primary.master = params()->disks[0];
	break;
	case 1:
	primary.slave = params()->disks[1];
	break;
	case 2:
	secondary.master = params()->disks[2];
	break;
	case 3:
	secondary.slave = params()->disks[3];
	break;
	default:
	panic("IDE controllers support a maximum "
	"of 4 devices attached!\n");
	}
	params()->disks[i]->setController(this);
	}

	primary.select(false);
	secondary.select(false);

	if ((BARAddrs[0] & ~BAR_IO_MASK) && (!legacyIO[0] \|\| ioShift)) {
	primary.cmdAddr = BARAddrs[0]; primary.cmdSize = BARSize[0];
	primary.ctrlAddr = BARAddrs[1]; primary.ctrlSize = BARSize[1];
	}
	if ((BARAddrs[2] & ~BAR_IO_MASK) && (!legacyIO[2] \|\| ioShift)) {
	secondary.cmdAddr = BARAddrs[2]; secondary.cmdSize = BARSize[2];
	secondary.ctrlAddr = BARAddrs[3]; secondary.ctrlSize = BARSize[3];
	}

	ioEnabled = (config.command & htole(PCI_CMD_IOSE));
	bmEnabled = (config.command & htole(PCI_CMD_BME));
	}

	bool
	IdeController::isDiskSelected(IdeDisk *diskPtr)
	{
	return (primary.selected == diskPtr \|\| secondary.selected == diskPtr);
	}

	void
	IdeController::intrPost()
	{
	primary.bmiRegs.status.intStatus = 1;
	PciDevice::intrPost();
	}

	void
	IdeController::setDmaComplete(IdeDisk *disk)
	{
	Channel *channel;
	if (disk == primary.master \|\| disk == primary.slave) {
	channel = &primary;
	} else if (disk == secondary.master \|\| disk == secondary.slave) {
	channel = &secondary;
	} else {
	panic("Unable to find disk based on pointer %#x\n", disk);
	}

	channel->bmiRegs.command.startStop = 0;
	channel->bmiRegs.status.active = 0;
	channel->bmiRegs.status.intStatus = 1;
	}

	Tick
	IdeController::readConfig(PacketPtr pkt)
	{
	int offset = pkt->getAddr() & PCI_CONFIG_SIZE;
	if (offset < PCI_DEVICE_SPECIFIC) {
	return PciDevice::readConfig(pkt);
	}

	switch (pkt->getSize()) {
	case sizeof(uint8_t):
	switch (offset) {
	case DeviceTiming:
	pkt->setLE<uint8_t>(deviceTiming);
	break;
	case UDMAControl:
	pkt->setLE<uint8_t>(udmaControl);
	break;
	case PrimaryTiming + 1:
	pkt->setLE<uint8_t>(bits(htole(primaryTiming), 15, 8));
	break;
	case SecondaryTiming + 1:
	pkt->setLE<uint8_t>(bits(htole(secondaryTiming), 15, 8));
	break;
	case IDEConfig:
	pkt->setLE<uint8_t>(bits(htole(ideConfig), 7, 0));
	break;
	case IDEConfig + 1:
	pkt->setLE<uint8_t>(bits(htole(ideConfig), 15, 8));
	break;
	default:
	panic("Invalid PCI configuration read for size 1 at offset: %#x!\n",
	offset);
	}
	DPRINTF(IdeCtrl, "PCI read offset: %#x size: 1 data: %#x\n", offset,
	(uint32_t)pkt->getLE<uint8_t>());
	break;
	case sizeof(uint16_t):
	switch (offset) {
	case UDMAControl:
	pkt->setLE<uint16_t>(udmaControl);
	break;
	case PrimaryTiming:
	pkt->setLE<uint16_t>(primaryTiming);
	break;
	case SecondaryTiming:
	pkt->setLE<uint16_t>(secondaryTiming);
	break;
	case UDMATiming:
	pkt->setLE<uint16_t>(udmaTiming);
	break;
	case IDEConfig:
	pkt->setLE<uint16_t>(ideConfig);
	break;
	default:
	panic("Invalid PCI configuration read for size 2 offset: %#x!\n",
	offset);
	}
	DPRINTF(IdeCtrl, "PCI read offset: %#x size: 2 data: %#x\n", offset,
	(uint32_t)pkt->getLE<uint16_t>());
	break;
	case sizeof(uint32_t):
	switch (offset) {
	case PrimaryTiming:
	pkt->setLE<uint32_t>(primaryTiming);
	break;
	case IDEConfig:
	pkt->setLE<uint32_t>(ideConfig);
	break;
	default:
	panic("No 32bit reads implemented for this device.");
	}
	DPRINTF(IdeCtrl, "PCI read offset: %#x size: 4 data: %#x\n", offset,
	(uint32_t)pkt->getLE<uint32_t>());
	break;
	default:
	panic("invalid access size(?) for PCI configspace!\n");
	}
	pkt->makeAtomicResponse();
	return configDelay;
	}


	Tick
	IdeController::writeConfig(PacketPtr pkt)
	{
	int offset = pkt->getAddr() & PCI_CONFIG_SIZE;
	if (offset < PCI_DEVICE_SPECIFIC) {
	PciDevice::writeConfig(pkt);
	} else {
	switch (pkt->getSize()) {
	case sizeof(uint8_t):
	switch (offset) {
	case DeviceTiming:
	deviceTiming = pkt->getLE<uint8_t>();
	break;
	case UDMAControl:
	udmaControl = pkt->getLE<uint8_t>();
	break;
	case IDEConfig:
	replaceBits(ideConfig, 7, 0, pkt->getLE<uint8_t>());
	break;
	case IDEConfig + 1:
	replaceBits(ideConfig, 15, 8, pkt->getLE<uint8_t>());
	break;
	default:
	panic("Invalid PCI configuration write "
	"for size 1 offset: %#x!\n", offset);
	}
	DPRINTF(IdeCtrl, "PCI write offset: %#x size: 1 data: %#x\n",
	offset, (uint32_t)pkt->getLE<uint8_t>());
	break;
	case sizeof(uint16_t):
	switch (offset) {
	case UDMAControl:
	udmaControl = pkt->getLE<uint16_t>();
	break;
	case PrimaryTiming:
	primaryTiming = pkt->getLE<uint16_t>();
	break;
	case SecondaryTiming:
	secondaryTiming = pkt->getLE<uint16_t>();
	break;
	case UDMATiming:
	udmaTiming = pkt->getLE<uint16_t>();
	break;
	case IDEConfig:
	ideConfig = pkt->getLE<uint16_t>();
	break;
	default:
	panic("Invalid PCI configuration write "
	"for size 2 offset: %#x!\n",
	offset);
	}
	DPRINTF(IdeCtrl, "PCI write offset: %#x size: 2 data: %#x\n",
	offset, (uint32_t)pkt->getLE<uint16_t>());
	break;
	case sizeof(uint32_t):
	switch (offset) {
	case PrimaryTiming:
	primaryTiming = pkt->getLE<uint32_t>();
	break;
	case IDEConfig:
	ideConfig = pkt->getLE<uint32_t>();
	break;
	default:
	panic("Write of unimplemented PCI config. register: %x\n", offset);
	}
	break;
	default:
	panic("invalid access size(?) for PCI configspace!\n");
	}
	pkt->makeAtomicResponse();
	}

	/* Trap command register writes and enable IO/BM as appropriate as well as
	* BARs. */
	switch(offset) {
	case PCI0_BASE_ADDR0:
	if (BARAddrs[0] != 0)
	primary.cmdAddr = BARAddrs[0];
	break;

	case PCI0_BASE_ADDR1:
	if (BARAddrs[1] != 0)
	primary.ctrlAddr = BARAddrs[1];
	break;

	case PCI0_BASE_ADDR2:
	if (BARAddrs[2] != 0)
	secondary.cmdAddr = BARAddrs[2];
	break;

	case PCI0_BASE_ADDR3:
	if (BARAddrs[3] != 0)
	secondary.ctrlAddr = BARAddrs[3];
	break;

	case PCI0_BASE_ADDR4:
	if (BARAddrs[4] != 0)
	bmiAddr = BARAddrs[4];
	break;

	case PCI_COMMAND:
	DPRINTF(IdeCtrl, "Writing to PCI Command val: %#x\n", config.command);
	ioEnabled = (config.command & htole(PCI_CMD_IOSE));
	bmEnabled = (config.command & htole(PCI_CMD_BME));
	break;
	}
	return configDelay;
	}

	void
	IdeController::Channel::accessCommand(Addr offset,
	int size, uint8_t *data, bool read)
	{
	const Addr SelectOffset = 6;
	const uint8_t SelectDevBit = 0x10;

	if (!read && offset == SelectOffset)
	select(*data & SelectDevBit);

	if (selected == NULL) {
	assert(size == sizeof(uint8_t));
	*data = 0;
	} else if (read) {
	selected->readCommand(offset, size, data);
	} else {
	selected->writeCommand(offset, size, data);
	}
	}

	void
	IdeController::Channel::accessControl(Addr offset,
	int size, uint8_t *data, bool read)
	{
	if (selected == NULL) {
	assert(size == sizeof(uint8_t));
	*data = 0;
	} else if (read) {
	selected->readControl(offset, size, data);
	} else {
	selected->writeControl(offset, size, data);
	}
	}

	void
	IdeController::Channel::accessBMI(Addr offset,
	int size, uint8_t *data, bool read)
	{
	assert(offset + size <= sizeof(BMIRegs));
	if (read) {
	memcpy(data, (uint8_t *)&bmiRegs + offset, size);
	} else {
	switch (offset) {
	case BMICommand:
	{
	if (size != sizeof(uint8_t))
	panic("Invalid BMIC write size: %x\n", size);

	BMICommandReg oldVal = bmiRegs.command;
	BMICommandReg newVal = *data;

	// if a DMA transfer is in progress, R/W control cannot change
	if (oldVal.startStop && oldVal.rw != newVal.rw)
	oldVal.rw = newVal.rw;

	if (oldVal.startStop != newVal.startStop) {
	if (selected == NULL)
	panic("DMA start for disk which does not exist\n");

	if (oldVal.startStop) {
	DPRINTF(IdeCtrl, "Stopping DMA transfer\n");
	bmiRegs.status.active = 0;

	selected->abortDma();
	} else {
	DPRINTF(IdeCtrl, "Starting DMA transfer\n");
	bmiRegs.status.active = 1;

	selected->startDma(letoh(bmiRegs.bmidtp));
	}
	}

	bmiRegs.command = newVal;
	}
	break;
	case BMIStatus:
	{
	if (size != sizeof(uint8_t))
	panic("Invalid BMIS write size: %x\n", size);

	BMIStatusReg oldVal = bmiRegs.status;
	BMIStatusReg newVal = *data;

	// the BMIDEA bit is read only
	newVal.active = oldVal.active;

	// to reset (set 0) IDEINTS and IDEDMAE, write 1 to each
	if ((oldVal.intStatus == 1) && (newVal.intStatus == 1)) {
	newVal.intStatus = 0; // clear the interrupt?
	} else {
	// Assigning two bitunion fields to each other does not
	// work as intended, so we need to use this temporary variable
	// to get around the bug.
	uint8_t tmp = oldVal.intStatus;
	newVal.intStatus = tmp;
	}
	if ((oldVal.dmaError == 1) && (newVal.dmaError == 1)) {
	newVal.dmaError = 0;
	} else {
	uint8_t tmp = oldVal.dmaError;
	newVal.dmaError = tmp;
	}

	bmiRegs.status = newVal;
	}
	break;
	case BMIDescTablePtr:
	if (size != sizeof(uint32_t))
	panic("Invalid BMIDTP write size: %x\n", size);
	bmiRegs.bmidtp = htole((uint32_t )data & ~0x3);
	break;
	default:
	if (size != sizeof(uint8_t) && size != sizeof(uint16_t) &&
	size != sizeof(uint32_t))
	panic("IDE controller write of invalid write size: %x\n", size);
	memcpy((uint8_t *)&bmiRegs + offset, data, size);
	}
	}
	}

	void
	IdeController::dispatchAccess(PacketPtr pkt, bool read)
	{
	if (pkt->getSize() != 1 && pkt->getSize() != 2 && pkt->getSize() !=4)
	panic("Bad IDE read size: %d\n", pkt->getSize());

	if (!ioEnabled) {
	pkt->makeAtomicResponse();
	DPRINTF(IdeCtrl, "io not enabled\n");
	return;
	}

	Addr addr = pkt->getAddr();
	int size = pkt->getSize();
	uint8_t *dataPtr = pkt->getPtr<uint8_t>();

	if (addr >= primary.cmdAddr &&
	addr < (primary.cmdAddr + primary.cmdSize)) {
	addr -= primary.cmdAddr;
	// linux may have shifted the address by ioShift,
	// here we shift it back, similarly for ctrlOffset.
	addr >>= ioShift;
	primary.accessCommand(addr, size, dataPtr, read);
	} else if (addr >= primary.ctrlAddr &&
	addr < (primary.ctrlAddr + primary.ctrlSize)) {
	addr -= primary.ctrlAddr;
	addr += ctrlOffset;
	primary.accessControl(addr, size, dataPtr, read);
	} else if (addr >= secondary.cmdAddr &&
	addr < (secondary.cmdAddr + secondary.cmdSize)) {
	addr -= secondary.cmdAddr;
	secondary.accessCommand(addr, size, dataPtr, read);
	} else if (addr >= secondary.ctrlAddr &&
	addr < (secondary.ctrlAddr + secondary.ctrlSize)) {
	addr -= secondary.ctrlAddr;
	secondary.accessControl(addr, size, dataPtr, read);
	} else if (addr >= bmiAddr && addr < (bmiAddr + bmiSize)) {
	if (!read && !bmEnabled)
	return;
	addr -= bmiAddr;
	if (addr < sizeof(Channel::BMIRegs)) {
	primary.accessBMI(addr, size, dataPtr, read);
	} else {
	addr -= sizeof(Channel::BMIRegs);
	secondary.accessBMI(addr, size, dataPtr, read);
	}
	} else {
	panic("IDE controller access to invalid address: %#x\n", addr);
	}

	#ifndef NDEBUG
	uint32_t data;
	if (pkt->getSize() == 1)
	data = pkt->getLE<uint8_t>();
	else if (pkt->getSize() == 2)
	data = pkt->getLE<uint16_t>();
	else
	data = pkt->getLE<uint32_t>();
	DPRINTF(IdeCtrl, "%s from offset: %#x size: %#x data: %#x\n",
	read ? "Read" : "Write", pkt->getAddr(), pkt->getSize(), data);
	#endif

	pkt->makeAtomicResponse();
	}

	Tick
	IdeController::read(PacketPtr pkt)
	{
	dispatchAccess(pkt, true);
	return pioDelay;
	}

	Tick
	IdeController::write(PacketPtr pkt)
	{
	dispatchAccess(pkt, false);
	return pioDelay;
	}

	void
	IdeController::serialize(CheckpointOut &cp) const
	{
	// Serialize the PciDevice base class
	PciDevice::serialize(cp);

	// Serialize channels
	primary.serialize("primary", cp);
	secondary.serialize("secondary", cp);

	// Serialize config registers
	SERIALIZE_SCALAR(primaryTiming);
	SERIALIZE_SCALAR(secondaryTiming);
	SERIALIZE_SCALAR(deviceTiming);
	SERIALIZE_SCALAR(udmaControl);
	SERIALIZE_SCALAR(udmaTiming);
	SERIALIZE_SCALAR(ideConfig);

	// Serialize internal state
	SERIALIZE_SCALAR(ioEnabled);
	SERIALIZE_SCALAR(bmEnabled);
	SERIALIZE_SCALAR(bmiAddr);
	SERIALIZE_SCALAR(bmiSize);
	}

	void
	IdeController::Channel::serialize(const std::string &base,
	CheckpointOut &cp) const
	{
	paramOut(cp, base + ".cmdAddr", cmdAddr);
	paramOut(cp, base + ".cmdSize", cmdSize);
	paramOut(cp, base + ".ctrlAddr", ctrlAddr);
	paramOut(cp, base + ".ctrlSize", ctrlSize);
	uint8_t command = bmiRegs.command;
	paramOut(cp, base + ".bmiRegs.command", command);
	paramOut(cp, base + ".bmiRegs.reserved0", bmiRegs.reserved0);
	uint8_t status = bmiRegs.status;
	paramOut(cp, base + ".bmiRegs.status", status);
	paramOut(cp, base + ".bmiRegs.reserved1", bmiRegs.reserved1);
	paramOut(cp, base + ".bmiRegs.bmidtp", bmiRegs.bmidtp);
	paramOut(cp, base + ".selectBit", selectBit);
	}

	void
	IdeController::unserialize(CheckpointIn &cp)
	{
	// Unserialize the PciDevice base class
	PciDevice::unserialize(cp);

	// Unserialize channels
	primary.unserialize("primary", cp);
	secondary.unserialize("secondary", cp);

	// Unserialize config registers
	UNSERIALIZE_SCALAR(primaryTiming);
	UNSERIALIZE_SCALAR(secondaryTiming);
	UNSERIALIZE_SCALAR(deviceTiming);
	UNSERIALIZE_SCALAR(udmaControl);
	UNSERIALIZE_SCALAR(udmaTiming);
	UNSERIALIZE_SCALAR(ideConfig);

	// Unserialize internal state
	UNSERIALIZE_SCALAR(ioEnabled);
	UNSERIALIZE_SCALAR(bmEnabled);
	UNSERIALIZE_SCALAR(bmiAddr);
	UNSERIALIZE_SCALAR(bmiSize);
	}

	void
	IdeController::Channel::unserialize(const std::string &base, CheckpointIn &cp)
	{
	paramIn(cp, base + ".cmdAddr", cmdAddr);
	paramIn(cp, base + ".cmdSize", cmdSize);
	paramIn(cp, base + ".ctrlAddr", ctrlAddr);
	paramIn(cp, base + ".ctrlSize", ctrlSize);
	uint8_t command;
	paramIn(cp, base +".bmiRegs.command", command);
	bmiRegs.command = command;
	paramIn(cp, base + ".bmiRegs.reserved0", bmiRegs.reserved0);
	uint8_t status;
	paramIn(cp, base + ".bmiRegs.status", status);
	bmiRegs.status = status;
	paramIn(cp, base + ".bmiRegs.reserved1", bmiRegs.reserved1);
	paramIn(cp, base + ".bmiRegs.bmidtp", bmiRegs.bmidtp);
	paramIn(cp, base + ".selectBit", selectBit);
	select(selectBit);
	}

	IdeController *
	IdeControllerParams::create()
	{
	return new IdeController(this);
	}