blob: 4fe065a3f1dc7086c9154caf9b4eb963255e081d [file] [log] [blame]
/*
* Copyright (c) 1999-2008 Mark D. Hill and David A. Wood
* Copyright (c) 2013 Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* These are the functions that exported to slicc from ruby.
*/
#ifndef __MEM_RUBY_SLICC_INTERFACE_RUBYSLICCUTIL_HH__
#define __MEM_RUBY_SLICC_INTERFACE_RUBYSLICCUTIL_HH__
#include <cassert>
#include "debug/RubySlicc.hh"
#include "mem/packet.hh"
#include "mem/ruby/common/Address.hh"
#include "mem/ruby/common/BoolVec.hh"
#include "mem/ruby/common/DataBlock.hh"
#include "mem/ruby/common/TypeDefines.hh"
#include "mem/ruby/common/WriteMask.hh"
inline Cycles zero_time() { return Cycles(0); }
inline NodeID
intToID(int nodenum)
{
NodeID id = nodenum;
return id;
}
inline int
IDToInt(NodeID id)
{
int nodenum = id;
return nodenum;
}
inline int
addressToInt(Addr addr)
{
assert(!(addr & 0xffffffff00000000));
return addr;
}
inline Addr
intToAddress(int addr)
{
assert(!(addr & 0xffffffff00000000));
return addr;
}
inline int
mod(int val, int mod)
{
return val % mod;
}
inline int max_tokens()
{
return 1024;
}
/**
* This function accepts an address, a data block and a packet. If the address
* range for the data block contains the address which the packet needs to
* read, then the data from the data block is written to the packet. True is
* returned if the data block was read, otherwise false is returned.
*
* This is used during a functional access "search the world" operation. The
* functional access looks in every place that might hold a valid data block
* and, if it finds one, checks to see if it is holding the address the access
* is searching for. During the access check, the WriteMask could be in any
* state, including empty.
*/
inline bool
testAndRead(Addr addr, DataBlock& blk, Packet *pkt)
{
Addr pktLineAddr = makeLineAddress(pkt->getAddr());
Addr lineAddr = makeLineAddress(addr);
if (pktLineAddr == lineAddr) {
uint8_t *data = pkt->getPtr<uint8_t>();
unsigned int size_in_bytes = pkt->getSize();
unsigned startByte = pkt->getAddr() - lineAddr;
for (unsigned i = 0; i < size_in_bytes; ++i) {
data[i] = blk.getByte(i + startByte);
}
return true;
}
return false;
}
/**
* This function accepts an address, a data block, a write mask and a packet.
* If the valid address range for the data block contains the address which
* the packet needs to read, then the data from the data block is written to
* the packet. True is returned if any part of the data block was read,
* otherwise false is returned.
*/
inline bool
testAndReadMask(Addr addr, DataBlock& blk, WriteMask& mask, Packet *pkt)
{
Addr pktLineAddr = makeLineAddress(pkt->getAddr());
Addr lineAddr = makeLineAddress(addr);
if (pktLineAddr == lineAddr) {
uint8_t *data = pkt->getPtr<uint8_t>();
unsigned int size_in_bytes = pkt->getSize();
unsigned startByte = pkt->getAddr() - lineAddr;
bool was_read = false;
for (unsigned i = 0; i < size_in_bytes; ++i) {
if (mask.test(i + startByte)) {
was_read = true;
data[i] = blk.getByte(i + startByte);
}
}
return was_read;
}
return false;
}
/**
* This function accepts an address, a data block and a packet. If the address
* range for the data block contains the address which the packet needs to
* write, then the data from the packet is written to the data block. True is
* returned if the data block was written, otherwise false is returned.
*/
inline bool
testAndWrite(Addr addr, DataBlock& blk, Packet *pkt)
{
Addr pktLineAddr = makeLineAddress(pkt->getAddr());
Addr lineAddr = makeLineAddress(addr);
if (pktLineAddr == lineAddr) {
const uint8_t *data = pkt->getConstPtr<uint8_t>();
unsigned int size_in_bytes = pkt->getSize();
unsigned startByte = pkt->getAddr() - lineAddr;
for (unsigned i = 0; i < size_in_bytes; ++i) {
blk.setByte(i + startByte, data[i]);
}
return true;
}
return false;
}
inline int
countBoolVec(BoolVec bVec)
{
int count = 0;
for (const auto &it: bVec) {
if (it) {
count++;
}
}
return count;
}
#endif // __MEM_RUBY_SLICC_INTERFACE_RUBYSLICCUTIL_HH__