| /* |
| * Copyright (c) 2010-2018 ARM Limited |
| * All rights reserved. |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2002-2005 The Regents of The University of Michigan |
| * Copyright (c) 2010,2015 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Erik Hallnor |
| * Dave Greene |
| * Nathan Binkert |
| * Steve Reinhardt |
| * Ron Dreslinski |
| * Andreas Sandberg |
| * Nikos Nikoleris |
| */ |
| |
| /** |
| * @file |
| * Cache definitions. |
| */ |
| |
| #include "mem/cache/cache.hh" |
| |
| #include "base/logging.hh" |
| #include "base/types.hh" |
| #include "debug/Cache.hh" |
| #include "debug/CachePort.hh" |
| #include "debug/CacheTags.hh" |
| #include "debug/CacheVerbose.hh" |
| #include "mem/cache/blk.hh" |
| #include "mem/cache/mshr.hh" |
| #include "mem/cache/prefetch/base.hh" |
| #include "sim/sim_exit.hh" |
| |
| Cache::Cache(const CacheParams *p) |
| : BaseCache(p, p->system->cacheLineSize()), |
| tags(p->tags), |
| prefetcher(p->prefetcher), |
| doFastWrites(true), |
| prefetchOnAccess(p->prefetch_on_access), |
| clusivity(p->clusivity), |
| writebackClean(p->writeback_clean), |
| tempBlockWriteback(nullptr), |
| writebackTempBlockAtomicEvent([this]{ writebackTempBlockAtomic(); }, |
| name(), false, |
| EventBase::Delayed_Writeback_Pri) |
| { |
| tempBlock = new CacheBlk(); |
| tempBlock->data = new uint8_t[blkSize]; |
| |
| cpuSidePort = new CpuSidePort(p->name + ".cpu_side", this, |
| "CpuSidePort"); |
| memSidePort = new MemSidePort(p->name + ".mem_side", this, |
| "MemSidePort"); |
| |
| tags->setCache(this); |
| if (prefetcher) |
| prefetcher->setCache(this); |
| } |
| |
| Cache::~Cache() |
| { |
| delete [] tempBlock->data; |
| delete tempBlock; |
| |
| delete cpuSidePort; |
| delete memSidePort; |
| } |
| |
| void |
| Cache::regStats() |
| { |
| BaseCache::regStats(); |
| } |
| |
| void |
| Cache::cmpAndSwap(CacheBlk *blk, PacketPtr pkt) |
| { |
| assert(pkt->isRequest()); |
| |
| uint64_t overwrite_val; |
| bool overwrite_mem; |
| uint64_t condition_val64; |
| uint32_t condition_val32; |
| |
| int offset = tags->extractBlkOffset(pkt->getAddr()); |
| uint8_t *blk_data = blk->data + offset; |
| |
| assert(sizeof(uint64_t) >= pkt->getSize()); |
| |
| overwrite_mem = true; |
| // keep a copy of our possible write value, and copy what is at the |
| // memory address into the packet |
| pkt->writeData((uint8_t *)&overwrite_val); |
| pkt->setData(blk_data); |
| |
| if (pkt->req->isCondSwap()) { |
| if (pkt->getSize() == sizeof(uint64_t)) { |
| condition_val64 = pkt->req->getExtraData(); |
| overwrite_mem = !std::memcmp(&condition_val64, blk_data, |
| sizeof(uint64_t)); |
| } else if (pkt->getSize() == sizeof(uint32_t)) { |
| condition_val32 = (uint32_t)pkt->req->getExtraData(); |
| overwrite_mem = !std::memcmp(&condition_val32, blk_data, |
| sizeof(uint32_t)); |
| } else |
| panic("Invalid size for conditional read/write\n"); |
| } |
| |
| if (overwrite_mem) { |
| std::memcpy(blk_data, &overwrite_val, pkt->getSize()); |
| blk->status |= BlkDirty; |
| } |
| } |
| |
| |
| void |
| Cache::satisfyRequest(PacketPtr pkt, CacheBlk *blk, |
| bool deferred_response, bool pending_downgrade) |
| { |
| assert(pkt->isRequest()); |
| |
| assert(blk && blk->isValid()); |
| // Occasionally this is not true... if we are a lower-level cache |
| // satisfying a string of Read and ReadEx requests from |
| // upper-level caches, a Read will mark the block as shared but we |
| // can satisfy a following ReadEx anyway since we can rely on the |
| // Read requester(s) to have buffered the ReadEx snoop and to |
| // invalidate their blocks after receiving them. |
| // assert(!pkt->needsWritable() || blk->isWritable()); |
| assert(pkt->getOffset(blkSize) + pkt->getSize() <= blkSize); |
| |
| // Check RMW operations first since both isRead() and |
| // isWrite() will be true for them |
| if (pkt->cmd == MemCmd::SwapReq) { |
| cmpAndSwap(blk, pkt); |
| } else if (pkt->isWrite()) { |
| // we have the block in a writable state and can go ahead, |
| // note that the line may be also be considered writable in |
| // downstream caches along the path to memory, but always |
| // Exclusive, and never Modified |
| assert(blk->isWritable()); |
| // Write or WriteLine at the first cache with block in writable state |
| if (blk->checkWrite(pkt)) { |
| pkt->writeDataToBlock(blk->data, blkSize); |
| } |
| // Always mark the line as dirty (and thus transition to the |
| // Modified state) even if we are a failed StoreCond so we |
| // supply data to any snoops that have appended themselves to |
| // this cache before knowing the store will fail. |
| blk->status |= BlkDirty; |
| DPRINTF(CacheVerbose, "%s for %s (write)\n", __func__, pkt->print()); |
| } else if (pkt->isRead()) { |
| if (pkt->isLLSC()) { |
| blk->trackLoadLocked(pkt); |
| } |
| |
| // all read responses have a data payload |
| assert(pkt->hasRespData()); |
| pkt->setDataFromBlock(blk->data, blkSize); |
| |
| // determine if this read is from a (coherent) cache or not |
| if (pkt->fromCache()) { |
| assert(pkt->getSize() == blkSize); |
| // special handling for coherent block requests from |
| // upper-level caches |
| if (pkt->needsWritable()) { |
| // sanity check |
| assert(pkt->cmd == MemCmd::ReadExReq || |
| pkt->cmd == MemCmd::SCUpgradeFailReq); |
| assert(!pkt->hasSharers()); |
| |
| // if we have a dirty copy, make sure the recipient |
| // keeps it marked dirty (in the modified state) |
| if (blk->isDirty()) { |
| pkt->setCacheResponding(); |
| blk->status &= ~BlkDirty; |
| } |
| } else if (blk->isWritable() && !pending_downgrade && |
| !pkt->hasSharers() && |
| pkt->cmd != MemCmd::ReadCleanReq) { |
| // we can give the requester a writable copy on a read |
| // request if: |
| // - we have a writable copy at this level (& below) |
| // - we don't have a pending snoop from below |
| // signaling another read request |
| // - no other cache above has a copy (otherwise it |
| // would have set hasSharers flag when |
| // snooping the packet) |
| // - the read has explicitly asked for a clean |
| // copy of the line |
| if (blk->isDirty()) { |
| // special considerations if we're owner: |
| if (!deferred_response) { |
| // respond with the line in Modified state |
| // (cacheResponding set, hasSharers not set) |
| pkt->setCacheResponding(); |
| |
| // if this cache is mostly inclusive, we |
| // keep the block in the Exclusive state, |
| // and pass it upwards as Modified |
| // (writable and dirty), hence we have |
| // multiple caches, all on the same path |
| // towards memory, all considering the |
| // same block writable, but only one |
| // considering it Modified |
| |
| // we get away with multiple caches (on |
| // the same path to memory) considering |
| // the block writeable as we always enter |
| // the cache hierarchy through a cache, |
| // and first snoop upwards in all other |
| // branches |
| blk->status &= ~BlkDirty; |
| } else { |
| // if we're responding after our own miss, |
| // there's a window where the recipient didn't |
| // know it was getting ownership and may not |
| // have responded to snoops correctly, so we |
| // have to respond with a shared line |
| pkt->setHasSharers(); |
| } |
| } |
| } else { |
| // otherwise only respond with a shared copy |
| pkt->setHasSharers(); |
| } |
| } |
| } else if (pkt->isUpgrade()) { |
| // sanity check |
| assert(!pkt->hasSharers()); |
| |
| if (blk->isDirty()) { |
| // we were in the Owned state, and a cache above us that |
| // has the line in Shared state needs to be made aware |
| // that the data it already has is in fact dirty |
| pkt->setCacheResponding(); |
| blk->status &= ~BlkDirty; |
| } |
| } else { |
| assert(pkt->isInvalidate()); |
| invalidateBlock(blk); |
| DPRINTF(CacheVerbose, "%s for %s (invalidation)\n", __func__, |
| pkt->print()); |
| } |
| } |
| |
| ///////////////////////////////////////////////////// |
| // |
| // Access path: requests coming in from the CPU side |
| // |
| ///////////////////////////////////////////////////// |
| |
| bool |
| Cache::access(PacketPtr pkt, CacheBlk *&blk, Cycles &lat, |
| PacketList &writebacks) |
| { |
| // sanity check |
| assert(pkt->isRequest()); |
| |
| chatty_assert(!(isReadOnly && pkt->isWrite()), |
| "Should never see a write in a read-only cache %s\n", |
| name()); |
| |
| DPRINTF(CacheVerbose, "%s for %s\n", __func__, pkt->print()); |
| |
| if (pkt->req->isUncacheable()) { |
| DPRINTF(Cache, "uncacheable: %s\n", pkt->print()); |
| |
| // flush and invalidate any existing block |
| CacheBlk *old_blk(tags->findBlock(pkt->getAddr(), pkt->isSecure())); |
| if (old_blk && old_blk->isValid()) { |
| if (old_blk->isDirty() || writebackClean) |
| writebacks.push_back(writebackBlk(old_blk)); |
| else |
| writebacks.push_back(cleanEvictBlk(old_blk)); |
| invalidateBlock(old_blk); |
| } |
| |
| blk = nullptr; |
| // lookupLatency is the latency in case the request is uncacheable. |
| lat = lookupLatency; |
| return false; |
| } |
| |
| // Here lat is the value passed as parameter to accessBlock() function |
| // that can modify its value. |
| blk = tags->accessBlock(pkt->getAddr(), pkt->isSecure(), lat); |
| |
| DPRINTF(Cache, "%s %s\n", pkt->print(), |
| blk ? "hit " + blk->print() : "miss"); |
| |
| if (pkt->req->isCacheMaintenance()) { |
| // A cache maintenance operation is always forwarded to the |
| // memory below even if the block is found in dirty state. |
| |
| // We defer any changes to the state of the block until we |
| // create and mark as in service the mshr for the downstream |
| // packet. |
| return false; |
| } |
| |
| if (pkt->isEviction()) { |
| // We check for presence of block in above caches before issuing |
| // Writeback or CleanEvict to write buffer. Therefore the only |
| // possible cases can be of a CleanEvict packet coming from above |
| // encountering a Writeback generated in this cache peer cache and |
| // waiting in the write buffer. Cases of upper level peer caches |
| // generating CleanEvict and Writeback or simply CleanEvict and |
| // CleanEvict almost simultaneously will be caught by snoops sent out |
| // by crossbar. |
| WriteQueueEntry *wb_entry = writeBuffer.findMatch(pkt->getAddr(), |
| pkt->isSecure()); |
| if (wb_entry) { |
| assert(wb_entry->getNumTargets() == 1); |
| PacketPtr wbPkt = wb_entry->getTarget()->pkt; |
| assert(wbPkt->isWriteback()); |
| |
| if (pkt->isCleanEviction()) { |
| // The CleanEvict and WritebackClean snoops into other |
| // peer caches of the same level while traversing the |
| // crossbar. If a copy of the block is found, the |
| // packet is deleted in the crossbar. Hence, none of |
| // the other upper level caches connected to this |
| // cache have the block, so we can clear the |
| // BLOCK_CACHED flag in the Writeback if set and |
| // discard the CleanEvict by returning true. |
| wbPkt->clearBlockCached(); |
| return true; |
| } else { |
| assert(pkt->cmd == MemCmd::WritebackDirty); |
| // Dirty writeback from above trumps our clean |
| // writeback... discard here |
| // Note: markInService will remove entry from writeback buffer. |
| markInService(wb_entry); |
| delete wbPkt; |
| } |
| } |
| } |
| |
| // Writeback handling is special case. We can write the block into |
| // the cache without having a writeable copy (or any copy at all). |
| if (pkt->isWriteback()) { |
| assert(blkSize == pkt->getSize()); |
| |
| // we could get a clean writeback while we are having |
| // outstanding accesses to a block, do the simple thing for |
| // now and drop the clean writeback so that we do not upset |
| // any ordering/decisions about ownership already taken |
| if (pkt->cmd == MemCmd::WritebackClean && |
| mshrQueue.findMatch(pkt->getAddr(), pkt->isSecure())) { |
| DPRINTF(Cache, "Clean writeback %#llx to block with MSHR, " |
| "dropping\n", pkt->getAddr()); |
| return true; |
| } |
| |
| if (blk == nullptr) { |
| // need to do a replacement |
| blk = allocateBlock(pkt->getAddr(), pkt->isSecure(), writebacks); |
| if (blk == nullptr) { |
| // no replaceable block available: give up, fwd to next level. |
| incMissCount(pkt); |
| return false; |
| } |
| tags->insertBlock(pkt, blk); |
| |
| blk->status = (BlkValid | BlkReadable); |
| if (pkt->isSecure()) { |
| blk->status |= BlkSecure; |
| } |
| } |
| // only mark the block dirty if we got a writeback command, |
| // and leave it as is for a clean writeback |
| if (pkt->cmd == MemCmd::WritebackDirty) { |
| assert(!blk->isDirty()); |
| blk->status |= BlkDirty; |
| } |
| // if the packet does not have sharers, it is passing |
| // writable, and we got the writeback in Modified or Exclusive |
| // state, if not we are in the Owned or Shared state |
| if (!pkt->hasSharers()) { |
| blk->status |= BlkWritable; |
| } |
| // nothing else to do; writeback doesn't expect response |
| assert(!pkt->needsResponse()); |
| std::memcpy(blk->data, pkt->getConstPtr<uint8_t>(), blkSize); |
| DPRINTF(Cache, "%s new state is %s\n", __func__, blk->print()); |
| incHitCount(pkt); |
| return true; |
| } else if (pkt->cmd == MemCmd::CleanEvict) { |
| if (blk != nullptr) { |
| // Found the block in the tags, need to stop CleanEvict from |
| // propagating further down the hierarchy. Returning true will |
| // treat the CleanEvict like a satisfied write request and delete |
| // it. |
| return true; |
| } |
| // We didn't find the block here, propagate the CleanEvict further |
| // down the memory hierarchy. Returning false will treat the CleanEvict |
| // like a Writeback which could not find a replaceable block so has to |
| // go to next level. |
| return false; |
| } else if (pkt->cmd == MemCmd::WriteClean) { |
| // WriteClean handling is a special case. We can allocate a |
| // block directly if it doesn't exist and we can update the |
| // block immediately. The WriteClean transfers the ownership |
| // of the block as well. |
| assert(blkSize == pkt->getSize()); |
| |
| if (!blk) { |
| if (pkt->writeThrough()) { |
| // if this is a write through packet, we don't try to |
| // allocate if the block is not present |
| return false; |
| } else { |
| // a writeback that misses needs to allocate a new block |
| blk = allocateBlock(pkt->getAddr(), pkt->isSecure(), |
| writebacks); |
| if (!blk) { |
| // no replaceable block available: give up, fwd to |
| // next level. |
| incMissCount(pkt); |
| return false; |
| } |
| tags->insertBlock(pkt, blk); |
| |
| blk->status = (BlkValid | BlkReadable); |
| if (pkt->isSecure()) { |
| blk->status |= BlkSecure; |
| } |
| } |
| } |
| |
| // at this point either this is a writeback or a write-through |
| // write clean operation and the block is already in this |
| // cache, we need to update the data and the block flags |
| assert(blk); |
| assert(!blk->isDirty()); |
| if (!pkt->writeThrough()) { |
| blk->status |= BlkDirty; |
| } |
| // nothing else to do; writeback doesn't expect response |
| assert(!pkt->needsResponse()); |
| std::memcpy(blk->data, pkt->getConstPtr<uint8_t>(), blkSize); |
| DPRINTF(Cache, "%s new state is %s\n", __func__, blk->print()); |
| |
| incHitCount(pkt); |
| // populate the time when the block will be ready to access. |
| blk->whenReady = clockEdge(fillLatency) + pkt->headerDelay + |
| pkt->payloadDelay; |
| // if this a write-through packet it will be sent to cache |
| // below |
| return !pkt->writeThrough(); |
| } else if (blk && (pkt->needsWritable() ? blk->isWritable() : |
| blk->isReadable())) { |
| // OK to satisfy access |
| incHitCount(pkt); |
| satisfyRequest(pkt, blk); |
| maintainClusivity(pkt->fromCache(), blk); |
| |
| return true; |
| } |
| |
| // Can't satisfy access normally... either no block (blk == nullptr) |
| // or have block but need writable |
| |
| incMissCount(pkt); |
| |
| if (blk == nullptr && pkt->isLLSC() && pkt->isWrite()) { |
| // complete miss on store conditional... just give up now |
| pkt->req->setExtraData(0); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void |
| Cache::maintainClusivity(bool from_cache, CacheBlk *blk) |
| { |
| if (from_cache && blk && blk->isValid() && !blk->isDirty() && |
| clusivity == Enums::mostly_excl) { |
| // if we have responded to a cache, and our block is still |
| // valid, but not dirty, and this cache is mostly exclusive |
| // with respect to the cache above, drop the block |
| invalidateBlock(blk); |
| } |
| } |
| |
| void |
| Cache::doWritebacks(PacketList& writebacks, Tick forward_time) |
| { |
| while (!writebacks.empty()) { |
| PacketPtr wbPkt = writebacks.front(); |
| // We use forwardLatency here because we are copying writebacks to |
| // write buffer. |
| |
| // Call isCachedAbove for Writebacks, CleanEvicts and |
| // WriteCleans to discover if the block is cached above. |
| if (isCachedAbove(wbPkt)) { |
| if (wbPkt->cmd == MemCmd::CleanEvict) { |
| // Delete CleanEvict because cached copies exist above. The |
| // packet destructor will delete the request object because |
| // this is a non-snoop request packet which does not require a |
| // response. |
| delete wbPkt; |
| } else if (wbPkt->cmd == MemCmd::WritebackClean) { |
| // clean writeback, do not send since the block is |
| // still cached above |
| assert(writebackClean); |
| delete wbPkt; |
| } else { |
| assert(wbPkt->cmd == MemCmd::WritebackDirty || |
| wbPkt->cmd == MemCmd::WriteClean); |
| // Set BLOCK_CACHED flag in Writeback and send below, so that |
| // the Writeback does not reset the bit corresponding to this |
| // address in the snoop filter below. |
| wbPkt->setBlockCached(); |
| allocateWriteBuffer(wbPkt, forward_time); |
| } |
| } else { |
| // If the block is not cached above, send packet below. Both |
| // CleanEvict and Writeback with BLOCK_CACHED flag cleared will |
| // reset the bit corresponding to this address in the snoop filter |
| // below. |
| allocateWriteBuffer(wbPkt, forward_time); |
| } |
| writebacks.pop_front(); |
| } |
| } |
| |
| void |
| Cache::doWritebacksAtomic(PacketList& writebacks) |
| { |
| while (!writebacks.empty()) { |
| PacketPtr wbPkt = writebacks.front(); |
| // Call isCachedAbove for both Writebacks and CleanEvicts. If |
| // isCachedAbove returns true we set BLOCK_CACHED flag in Writebacks |
| // and discard CleanEvicts. |
| if (isCachedAbove(wbPkt, false)) { |
| if (wbPkt->cmd == MemCmd::WritebackDirty || |
| wbPkt->cmd == MemCmd::WriteClean) { |
| // Set BLOCK_CACHED flag in Writeback and send below, |
| // so that the Writeback does not reset the bit |
| // corresponding to this address in the snoop filter |
| // below. We can discard CleanEvicts because cached |
| // copies exist above. Atomic mode isCachedAbove |
| // modifies packet to set BLOCK_CACHED flag |
| memSidePort->sendAtomic(wbPkt); |
| } |
| } else { |
| // If the block is not cached above, send packet below. Both |
| // CleanEvict and Writeback with BLOCK_CACHED flag cleared will |
| // reset the bit corresponding to this address in the snoop filter |
| // below. |
| memSidePort->sendAtomic(wbPkt); |
| } |
| writebacks.pop_front(); |
| // In case of CleanEvicts, the packet destructor will delete the |
| // request object because this is a non-snoop request packet which |
| // does not require a response. |
| delete wbPkt; |
| } |
| } |
| |
| |
| void |
| Cache::recvTimingSnoopResp(PacketPtr pkt) |
| { |
| DPRINTF(Cache, "%s for %s\n", __func__, pkt->print()); |
| |
| assert(pkt->isResponse()); |
| assert(!system->bypassCaches()); |
| |
| // determine if the response is from a snoop request we created |
| // (in which case it should be in the outstandingSnoop), or if we |
| // merely forwarded someone else's snoop request |
| const bool forwardAsSnoop = outstandingSnoop.find(pkt->req) == |
| outstandingSnoop.end(); |
| |
| if (!forwardAsSnoop) { |
| // the packet came from this cache, so sink it here and do not |
| // forward it |
| assert(pkt->cmd == MemCmd::HardPFResp); |
| |
| outstandingSnoop.erase(pkt->req); |
| |
| DPRINTF(Cache, "Got prefetch response from above for addr " |
| "%#llx (%s)\n", pkt->getAddr(), pkt->isSecure() ? "s" : "ns"); |
| recvTimingResp(pkt); |
| return; |
| } |
| |
| // forwardLatency is set here because there is a response from an |
| // upper level cache. |
| // To pay the delay that occurs if the packet comes from the bus, |
| // we charge also headerDelay. |
| Tick snoop_resp_time = clockEdge(forwardLatency) + pkt->headerDelay; |
| // Reset the timing of the packet. |
| pkt->headerDelay = pkt->payloadDelay = 0; |
| memSidePort->schedTimingSnoopResp(pkt, snoop_resp_time); |
| } |
| |
| void |
| Cache::promoteWholeLineWrites(PacketPtr pkt) |
| { |
| // Cache line clearing instructions |
| if (doFastWrites && (pkt->cmd == MemCmd::WriteReq) && |
| (pkt->getSize() == blkSize) && (pkt->getOffset(blkSize) == 0)) { |
| pkt->cmd = MemCmd::WriteLineReq; |
| DPRINTF(Cache, "packet promoted from Write to WriteLineReq\n"); |
| } |
| } |
| |
| bool |
| Cache::recvTimingReq(PacketPtr pkt) |
| { |
| DPRINTF(CacheTags, "%s tags:\n%s\n", __func__, tags->print()); |
| |
| assert(pkt->isRequest()); |
| |
| // Just forward the packet if caches are disabled. |
| if (system->bypassCaches()) { |
| // @todo This should really enqueue the packet rather |
| bool M5_VAR_USED success = memSidePort->sendTimingReq(pkt); |
| assert(success); |
| return true; |
| } |
| |
| promoteWholeLineWrites(pkt); |
| |
| // Cache maintenance operations have to visit all the caches down |
| // to the specified xbar (PoC, PoU, etc.). Even if a cache above |
| // is responding we forward the packet to the memory below rather |
| // than creating an express snoop. |
| if (pkt->cacheResponding()) { |
| // a cache above us (but not where the packet came from) is |
| // responding to the request, in other words it has the line |
| // in Modified or Owned state |
| DPRINTF(Cache, "Cache above responding to %s: not responding\n", |
| pkt->print()); |
| |
| // if the packet needs the block to be writable, and the cache |
| // that has promised to respond (setting the cache responding |
| // flag) is not providing writable (it is in Owned rather than |
| // the Modified state), we know that there may be other Shared |
| // copies in the system; go out and invalidate them all |
| assert(pkt->needsWritable() && !pkt->responderHadWritable()); |
| |
| // an upstream cache that had the line in Owned state |
| // (dirty, but not writable), is responding and thus |
| // transferring the dirty line from one branch of the |
| // cache hierarchy to another |
| |
| // send out an express snoop and invalidate all other |
| // copies (snooping a packet that needs writable is the |
| // same as an invalidation), thus turning the Owned line |
| // into a Modified line, note that we don't invalidate the |
| // block in the current cache or any other cache on the |
| // path to memory |
| |
| // create a downstream express snoop with cleared packet |
| // flags, there is no need to allocate any data as the |
| // packet is merely used to co-ordinate state transitions |
| Packet *snoop_pkt = new Packet(pkt, true, false); |
| |
| // also reset the bus time that the original packet has |
| // not yet paid for |
| snoop_pkt->headerDelay = snoop_pkt->payloadDelay = 0; |
| |
| // make this an instantaneous express snoop, and let the |
| // other caches in the system know that the another cache |
| // is responding, because we have found the authorative |
| // copy (Modified or Owned) that will supply the right |
| // data |
| snoop_pkt->setExpressSnoop(); |
| snoop_pkt->setCacheResponding(); |
| |
| // this express snoop travels towards the memory, and at |
| // every crossbar it is snooped upwards thus reaching |
| // every cache in the system |
| bool M5_VAR_USED success = memSidePort->sendTimingReq(snoop_pkt); |
| // express snoops always succeed |
| assert(success); |
| |
| // main memory will delete the snoop packet |
| |
| // queue for deletion, as opposed to immediate deletion, as |
| // the sending cache is still relying on the packet |
| pendingDelete.reset(pkt); |
| |
| // no need to take any further action in this particular cache |
| // as an upstram cache has already committed to responding, |
| // and we have already sent out any express snoops in the |
| // section above to ensure all other copies in the system are |
| // invalidated |
| return true; |
| } |
| |
| // anything that is merely forwarded pays for the forward latency and |
| // the delay provided by the crossbar |
| Tick forward_time = clockEdge(forwardLatency) + pkt->headerDelay; |
| |
| // We use lookupLatency here because it is used to specify the latency |
| // to access. |
| Cycles lat = lookupLatency; |
| CacheBlk *blk = nullptr; |
| bool satisfied = false; |
| { |
| PacketList writebacks; |
| // Note that lat is passed by reference here. The function |
| // access() calls accessBlock() which can modify lat value. |
| satisfied = access(pkt, blk, lat, writebacks); |
| |
| // copy writebacks to write buffer here to ensure they logically |
| // proceed anything happening below |
| doWritebacks(writebacks, forward_time); |
| } |
| |
| // Here we charge the headerDelay that takes into account the latencies |
| // of the bus, if the packet comes from it. |
| // The latency charged it is just lat that is the value of lookupLatency |
| // modified by access() function, or if not just lookupLatency. |
| // In case of a hit we are neglecting response latency. |
| // In case of a miss we are neglecting forward latency. |
| Tick request_time = clockEdge(lat) + pkt->headerDelay; |
| // Here we reset the timing of the packet. |
| pkt->headerDelay = pkt->payloadDelay = 0; |
| |
| // track time of availability of next prefetch, if any |
| Tick next_pf_time = MaxTick; |
| |
| bool needsResponse = pkt->needsResponse(); |
| |
| if (satisfied) { |
| // should never be satisfying an uncacheable access as we |
| // flush and invalidate any existing block as part of the |
| // lookup |
| assert(!pkt->req->isUncacheable()); |
| |
| // hit (for all other request types) |
| |
| if (prefetcher && (prefetchOnAccess || |
| (blk && blk->wasPrefetched()))) { |
| if (blk) |
| blk->status &= ~BlkHWPrefetched; |
| |
| // Don't notify on SWPrefetch |
| if (!pkt->cmd.isSWPrefetch()) { |
| assert(!pkt->req->isCacheMaintenance()); |
| next_pf_time = prefetcher->notify(pkt); |
| } |
| } |
| |
| if (needsResponse) { |
| pkt->makeTimingResponse(); |
| // @todo: Make someone pay for this |
| pkt->headerDelay = pkt->payloadDelay = 0; |
| |
| // In this case we are considering request_time that takes |
| // into account the delay of the xbar, if any, and just |
| // lat, neglecting responseLatency, modelling hit latency |
| // just as lookupLatency or or the value of lat overriden |
| // by access(), that calls accessBlock() function. |
| cpuSidePort->schedTimingResp(pkt, request_time, true); |
| } else { |
| DPRINTF(Cache, "%s satisfied %s, no response needed\n", __func__, |
| pkt->print()); |
| |
| // queue the packet for deletion, as the sending cache is |
| // still relying on it; if the block is found in access(), |
| // CleanEvict and Writeback messages will be deleted |
| // here as well |
| pendingDelete.reset(pkt); |
| } |
| } else { |
| // miss |
| |
| Addr blk_addr = pkt->getBlockAddr(blkSize); |
| |
| // ignore any existing MSHR if we are dealing with an |
| // uncacheable request |
| MSHR *mshr = pkt->req->isUncacheable() ? nullptr : |
| mshrQueue.findMatch(blk_addr, pkt->isSecure()); |
| |
| // Software prefetch handling: |
| // To keep the core from waiting on data it won't look at |
| // anyway, send back a response with dummy data. Miss handling |
| // will continue asynchronously. Unfortunately, the core will |
| // insist upon freeing original Packet/Request, so we have to |
| // create a new pair with a different lifecycle. Note that this |
| // processing happens before any MSHR munging on the behalf of |
| // this request because this new Request will be the one stored |
| // into the MSHRs, not the original. |
| if (pkt->cmd.isSWPrefetch()) { |
| assert(needsResponse); |
| assert(pkt->req->hasPaddr()); |
| assert(!pkt->req->isUncacheable()); |
| |
| // There's no reason to add a prefetch as an additional target |
| // to an existing MSHR. If an outstanding request is already |
| // in progress, there is nothing for the prefetch to do. |
| // If this is the case, we don't even create a request at all. |
| PacketPtr pf = nullptr; |
| |
| if (!mshr) { |
| // copy the request and create a new SoftPFReq packet |
| RequestPtr req = new Request(pkt->req->getPaddr(), |
| pkt->req->getSize(), |
| pkt->req->getFlags(), |
| pkt->req->masterId()); |
| pf = new Packet(req, pkt->cmd); |
| pf->allocate(); |
| assert(pf->getAddr() == pkt->getAddr()); |
| assert(pf->getSize() == pkt->getSize()); |
| } |
| |
| pkt->makeTimingResponse(); |
| |
| // request_time is used here, taking into account lat and the delay |
| // charged if the packet comes from the xbar. |
| cpuSidePort->schedTimingResp(pkt, request_time, true); |
| |
| // If an outstanding request is in progress (we found an |
| // MSHR) this is set to null |
| pkt = pf; |
| } |
| |
| if (mshr) { |
| /// MSHR hit |
| /// @note writebacks will be checked in getNextMSHR() |
| /// for any conflicting requests to the same block |
| |
| //@todo remove hw_pf here |
| |
| // Coalesce unless it was a software prefetch (see above). |
| if (pkt) { |
| assert(!pkt->isWriteback()); |
| // CleanEvicts corresponding to blocks which have |
| // outstanding requests in MSHRs are simply sunk here |
| if (pkt->cmd == MemCmd::CleanEvict) { |
| pendingDelete.reset(pkt); |
| } else if (pkt->cmd == MemCmd::WriteClean) { |
| // A WriteClean should never coalesce with any |
| // outstanding cache maintenance requests. |
| |
| // We use forward_time here because there is an |
| // uncached memory write, forwarded to WriteBuffer. |
| allocateWriteBuffer(pkt, forward_time); |
| } else { |
| DPRINTF(Cache, "%s coalescing MSHR for %s\n", __func__, |
| pkt->print()); |
| |
| assert(pkt->req->masterId() < system->maxMasters()); |
| mshr_hits[pkt->cmdToIndex()][pkt->req->masterId()]++; |
| // We use forward_time here because it is the same |
| // considering new targets. We have multiple |
| // requests for the same address here. It |
| // specifies the latency to allocate an internal |
| // buffer and to schedule an event to the queued |
| // port and also takes into account the additional |
| // delay of the xbar. |
| mshr->allocateTarget(pkt, forward_time, order++, |
| allocOnFill(pkt->cmd)); |
| if (mshr->getNumTargets() == numTarget) { |
| noTargetMSHR = mshr; |
| setBlocked(Blocked_NoTargets); |
| // need to be careful with this... if this mshr isn't |
| // ready yet (i.e. time > curTick()), we don't want to |
| // move it ahead of mshrs that are ready |
| // mshrQueue.moveToFront(mshr); |
| } |
| } |
| // We should call the prefetcher reguardless if the request is |
| // satisfied or not, reguardless if the request is in the MSHR |
| // or not. The request could be a ReadReq hit, but still not |
| // satisfied (potentially because of a prior write to the same |
| // cache line. So, even when not satisfied, tehre is an MSHR |
| // already allocated for this, we need to let the prefetcher |
| // know about the request |
| if (prefetcher) { |
| // Don't notify on SWPrefetch |
| if (!pkt->cmd.isSWPrefetch() && |
| !pkt->req->isCacheMaintenance()) |
| next_pf_time = prefetcher->notify(pkt); |
| } |
| } |
| } else { |
| // no MSHR |
| assert(pkt->req->masterId() < system->maxMasters()); |
| if (pkt->req->isUncacheable()) { |
| mshr_uncacheable[pkt->cmdToIndex()][pkt->req->masterId()]++; |
| } else { |
| mshr_misses[pkt->cmdToIndex()][pkt->req->masterId()]++; |
| } |
| |
| if (pkt->isEviction() || pkt->cmd == MemCmd::WriteClean || |
| (pkt->req->isUncacheable() && pkt->isWrite())) { |
| // We use forward_time here because there is an |
| // uncached memory write, forwarded to WriteBuffer. |
| allocateWriteBuffer(pkt, forward_time); |
| } else { |
| if (blk && blk->isValid()) { |
| // should have flushed and have no valid block |
| assert(!pkt->req->isUncacheable()); |
| |
| // If we have a write miss to a valid block, we |
| // need to mark the block non-readable. Otherwise |
| // if we allow reads while there's an outstanding |
| // write miss, the read could return stale data |
| // out of the cache block... a more aggressive |
| // system could detect the overlap (if any) and |
| // forward data out of the MSHRs, but we don't do |
| // that yet. Note that we do need to leave the |
| // block valid so that it stays in the cache, in |
| // case we get an upgrade response (and hence no |
| // new data) when the write miss completes. |
| // As long as CPUs do proper store/load forwarding |
| // internally, and have a sufficiently weak memory |
| // model, this is probably unnecessary, but at some |
| // point it must have seemed like we needed it... |
| assert((pkt->needsWritable() && !blk->isWritable()) || |
| pkt->req->isCacheMaintenance()); |
| blk->status &= ~BlkReadable; |
| } |
| // Here we are using forward_time, modelling the latency of |
| // a miss (outbound) just as forwardLatency, neglecting the |
| // lookupLatency component. |
| allocateMissBuffer(pkt, forward_time); |
| } |
| |
| if (prefetcher) { |
| // Don't notify on SWPrefetch |
| if (!pkt->cmd.isSWPrefetch() && |
| !pkt->req->isCacheMaintenance()) |
| next_pf_time = prefetcher->notify(pkt); |
| } |
| } |
| } |
| |
| if (next_pf_time != MaxTick) |
| schedMemSideSendEvent(next_pf_time); |
| |
| return true; |
| } |
| |
| PacketPtr |
| Cache::createMissPacket(PacketPtr cpu_pkt, CacheBlk *blk, |
| bool needsWritable) const |
| { |
| // should never see evictions here |
| assert(!cpu_pkt->isEviction()); |
| |
| bool blkValid = blk && blk->isValid(); |
| |
| if (cpu_pkt->req->isUncacheable() || |
| (!blkValid && cpu_pkt->isUpgrade()) || |
| cpu_pkt->cmd == MemCmd::InvalidateReq || cpu_pkt->isClean()) { |
| // uncacheable requests and upgrades from upper-level caches |
| // that missed completely just go through as is |
| return nullptr; |
| } |
| |
| assert(cpu_pkt->needsResponse()); |
| |
| MemCmd cmd; |
| // @TODO make useUpgrades a parameter. |
| // Note that ownership protocols require upgrade, otherwise a |
| // write miss on a shared owned block will generate a ReadExcl, |
| // which will clobber the owned copy. |
| const bool useUpgrades = true; |
| if (cpu_pkt->cmd == MemCmd::WriteLineReq) { |
| assert(!blkValid || !blk->isWritable()); |
| // forward as invalidate to all other caches, this gives us |
| // the line in Exclusive state, and invalidates all other |
| // copies |
| cmd = MemCmd::InvalidateReq; |
| } else if (blkValid && useUpgrades) { |
| // only reason to be here is that blk is read only and we need |
| // it to be writable |
| assert(needsWritable); |
| assert(!blk->isWritable()); |
| cmd = cpu_pkt->isLLSC() ? MemCmd::SCUpgradeReq : MemCmd::UpgradeReq; |
| } else if (cpu_pkt->cmd == MemCmd::SCUpgradeFailReq || |
| cpu_pkt->cmd == MemCmd::StoreCondFailReq) { |
| // Even though this SC will fail, we still need to send out the |
| // request and get the data to supply it to other snoopers in the case |
| // where the determination the StoreCond fails is delayed due to |
| // all caches not being on the same local bus. |
| cmd = MemCmd::SCUpgradeFailReq; |
| } else { |
| // block is invalid |
| |
| // If the request does not need a writable there are two cases |
| // where we need to ensure the response will not fetch the |
| // block in dirty state: |
| // * this cache is read only and it does not perform |
| // writebacks, |
| // * this cache is mostly exclusive and will not fill (since |
| // it does not fill it will have to writeback the dirty data |
| // immediately which generates uneccesary writebacks). |
| bool force_clean_rsp = isReadOnly || clusivity == Enums::mostly_excl; |
| cmd = needsWritable ? MemCmd::ReadExReq : |
| (force_clean_rsp ? MemCmd::ReadCleanReq : MemCmd::ReadSharedReq); |
| } |
| PacketPtr pkt = new Packet(cpu_pkt->req, cmd, blkSize); |
| |
| // if there are upstream caches that have already marked the |
| // packet as having sharers (not passing writable), pass that info |
| // downstream |
| if (cpu_pkt->hasSharers() && !needsWritable) { |
| // note that cpu_pkt may have spent a considerable time in the |
| // MSHR queue and that the information could possibly be out |
| // of date, however, there is no harm in conservatively |
| // assuming the block has sharers |
| pkt->setHasSharers(); |
| DPRINTF(Cache, "%s: passing hasSharers from %s to %s\n", |
| __func__, cpu_pkt->print(), pkt->print()); |
| } |
| |
| // the packet should be block aligned |
| assert(pkt->getAddr() == pkt->getBlockAddr(blkSize)); |
| |
| pkt->allocate(); |
| DPRINTF(Cache, "%s: created %s from %s\n", __func__, pkt->print(), |
| cpu_pkt->print()); |
| return pkt; |
| } |
| |
| |
| Tick |
| Cache::recvAtomic(PacketPtr pkt) |
| { |
| // We are in atomic mode so we pay just for lookupLatency here. |
| Cycles lat = lookupLatency; |
| |
| // Forward the request if the system is in cache bypass mode. |
| if (system->bypassCaches()) |
| return ticksToCycles(memSidePort->sendAtomic(pkt)); |
| |
| promoteWholeLineWrites(pkt); |
| |
| // follow the same flow as in recvTimingReq, and check if a cache |
| // above us is responding |
| if (pkt->cacheResponding() && !pkt->isClean()) { |
| assert(!pkt->req->isCacheInvalidate()); |
| DPRINTF(Cache, "Cache above responding to %s: not responding\n", |
| pkt->print()); |
| |
| // if a cache is responding, and it had the line in Owned |
| // rather than Modified state, we need to invalidate any |
| // copies that are not on the same path to memory |
| assert(pkt->needsWritable() && !pkt->responderHadWritable()); |
| lat += ticksToCycles(memSidePort->sendAtomic(pkt)); |
| |
| return lat * clockPeriod(); |
| } |
| |
| // should assert here that there are no outstanding MSHRs or |
| // writebacks... that would mean that someone used an atomic |
| // access in timing mode |
| |
| CacheBlk *blk = nullptr; |
| PacketList writebacks; |
| bool satisfied = access(pkt, blk, lat, writebacks); |
| |
| if (pkt->isClean() && blk && blk->isDirty()) { |
| // A cache clean opearation is looking for a dirty |
| // block. If a dirty block is encountered a WriteClean |
| // will update any copies to the path to the memory |
| // until the point of reference. |
| DPRINTF(CacheVerbose, "%s: packet %s found block: %s\n", |
| __func__, pkt->print(), blk->print()); |
| PacketPtr wb_pkt = writecleanBlk(blk, pkt->req->getDest(), pkt->id); |
| writebacks.push_back(wb_pkt); |
| pkt->setSatisfied(); |
| } |
| |
| // handle writebacks resulting from the access here to ensure they |
| // logically proceed anything happening below |
| doWritebacksAtomic(writebacks); |
| |
| if (!satisfied) { |
| // MISS |
| |
| // deal with the packets that go through the write path of |
| // the cache, i.e. any evictions and writes |
| if (pkt->isEviction() || pkt->cmd == MemCmd::WriteClean || |
| (pkt->req->isUncacheable() && pkt->isWrite())) { |
| lat += ticksToCycles(memSidePort->sendAtomic(pkt)); |
| return lat * clockPeriod(); |
| } |
| // only misses left |
| |
| PacketPtr bus_pkt = createMissPacket(pkt, blk, pkt->needsWritable()); |
| |
| bool is_forward = (bus_pkt == nullptr); |
| |
| if (is_forward) { |
| // just forwarding the same request to the next level |
| // no local cache operation involved |
| bus_pkt = pkt; |
| } |
| |
| DPRINTF(Cache, "%s: Sending an atomic %s\n", __func__, |
| bus_pkt->print()); |
| |
| #if TRACING_ON |
| CacheBlk::State old_state = blk ? blk->status : 0; |
| #endif |
| |
| lat += ticksToCycles(memSidePort->sendAtomic(bus_pkt)); |
| |
| bool is_invalidate = bus_pkt->isInvalidate(); |
| |
| // We are now dealing with the response handling |
| DPRINTF(Cache, "%s: Receive response: %s in state %i\n", __func__, |
| bus_pkt->print(), old_state); |
| |
| // If packet was a forward, the response (if any) is already |
| // in place in the bus_pkt == pkt structure, so we don't need |
| // to do anything. Otherwise, use the separate bus_pkt to |
| // generate response to pkt and then delete it. |
| if (!is_forward) { |
| if (pkt->needsResponse()) { |
| assert(bus_pkt->isResponse()); |
| if (bus_pkt->isError()) { |
| pkt->makeAtomicResponse(); |
| pkt->copyError(bus_pkt); |
| } else if (pkt->cmd == MemCmd::WriteLineReq) { |
| // note the use of pkt, not bus_pkt here. |
| |
| // write-line request to the cache that promoted |
| // the write to a whole line |
| blk = handleFill(pkt, blk, writebacks, |
| allocOnFill(pkt->cmd)); |
| assert(blk != NULL); |
| is_invalidate = false; |
| satisfyRequest(pkt, blk); |
| } else if (bus_pkt->isRead() || |
| bus_pkt->cmd == MemCmd::UpgradeResp) { |
| // we're updating cache state to allow us to |
| // satisfy the upstream request from the cache |
| blk = handleFill(bus_pkt, blk, writebacks, |
| allocOnFill(pkt->cmd)); |
| satisfyRequest(pkt, blk); |
| maintainClusivity(pkt->fromCache(), blk); |
| } else { |
| // we're satisfying the upstream request without |
| // modifying cache state, e.g., a write-through |
| pkt->makeAtomicResponse(); |
| } |
| } |
| delete bus_pkt; |
| } |
| |
| if (is_invalidate && blk && blk->isValid()) { |
| invalidateBlock(blk); |
| } |
| } |
| |
| // Note that we don't invoke the prefetcher at all in atomic mode. |
| // It's not clear how to do it properly, particularly for |
| // prefetchers that aggressively generate prefetch candidates and |
| // rely on bandwidth contention to throttle them; these will tend |
| // to pollute the cache in atomic mode since there is no bandwidth |
| // contention. If we ever do want to enable prefetching in atomic |
| // mode, though, this is the place to do it... see timingAccess() |
| // for an example (though we'd want to issue the prefetch(es) |
| // immediately rather than calling requestMemSideBus() as we do |
| // there). |
| |
| // do any writebacks resulting from the response handling |
| doWritebacksAtomic(writebacks); |
| |
| // if we used temp block, check to see if its valid and if so |
| // clear it out, but only do so after the call to recvAtomic is |
| // finished so that any downstream observers (such as a snoop |
| // filter), first see the fill, and only then see the eviction |
| if (blk == tempBlock && tempBlock->isValid()) { |
| // the atomic CPU calls recvAtomic for fetch and load/store |
| // sequentuially, and we may already have a tempBlock |
| // writeback from the fetch that we have not yet sent |
| if (tempBlockWriteback) { |
| // if that is the case, write the prevoius one back, and |
| // do not schedule any new event |
| writebackTempBlockAtomic(); |
| } else { |
| // the writeback/clean eviction happens after the call to |
| // recvAtomic has finished (but before any successive |
| // calls), so that the response handling from the fill is |
| // allowed to happen first |
| schedule(writebackTempBlockAtomicEvent, curTick()); |
| } |
| |
| tempBlockWriteback = (blk->isDirty() || writebackClean) ? |
| writebackBlk(blk) : cleanEvictBlk(blk); |
| invalidateBlock(blk); |
| } |
| |
| if (pkt->needsResponse()) { |
| pkt->makeAtomicResponse(); |
| } |
| |
| return lat * clockPeriod(); |
| } |
| |
| |
| void |
| Cache::functionalAccess(PacketPtr pkt, bool fromCpuSide) |
| { |
| if (system->bypassCaches()) { |
| // Packets from the memory side are snoop request and |
| // shouldn't happen in bypass mode. |
| assert(fromCpuSide); |
| |
| // The cache should be flushed if we are in cache bypass mode, |
| // so we don't need to check if we need to update anything. |
| memSidePort->sendFunctional(pkt); |
| return; |
| } |
| |
| Addr blk_addr = pkt->getBlockAddr(blkSize); |
| bool is_secure = pkt->isSecure(); |
| CacheBlk *blk = tags->findBlock(pkt->getAddr(), is_secure); |
| MSHR *mshr = mshrQueue.findMatch(blk_addr, is_secure); |
| |
| pkt->pushLabel(name()); |
| |
| CacheBlkPrintWrapper cbpw(blk); |
| |
| // Note that just because an L2/L3 has valid data doesn't mean an |
| // L1 doesn't have a more up-to-date modified copy that still |
| // needs to be found. As a result we always update the request if |
| // we have it, but only declare it satisfied if we are the owner. |
| |
| // see if we have data at all (owned or otherwise) |
| bool have_data = blk && blk->isValid() |
| && pkt->checkFunctional(&cbpw, blk_addr, is_secure, blkSize, |
| blk->data); |
| |
| // data we have is dirty if marked as such or if we have an |
| // in-service MSHR that is pending a modified line |
| bool have_dirty = |
| have_data && (blk->isDirty() || |
| (mshr && mshr->inService && mshr->isPendingModified())); |
| |
| bool done = have_dirty |
| || cpuSidePort->checkFunctional(pkt) |
| || mshrQueue.checkFunctional(pkt, blk_addr) |
| || writeBuffer.checkFunctional(pkt, blk_addr) |
| || memSidePort->checkFunctional(pkt); |
| |
| DPRINTF(CacheVerbose, "%s: %s %s%s%s\n", __func__, pkt->print(), |
| (blk && blk->isValid()) ? "valid " : "", |
| have_data ? "data " : "", done ? "done " : ""); |
| |
| // We're leaving the cache, so pop cache->name() label |
| pkt->popLabel(); |
| |
| if (done) { |
| pkt->makeResponse(); |
| } else { |
| // if it came as a request from the CPU side then make sure it |
| // continues towards the memory side |
| if (fromCpuSide) { |
| memSidePort->sendFunctional(pkt); |
| } else if (cpuSidePort->isSnooping()) { |
| // if it came from the memory side, it must be a snoop request |
| // and we should only forward it if we are forwarding snoops |
| cpuSidePort->sendFunctionalSnoop(pkt); |
| } |
| } |
| } |
| |
| |
| ///////////////////////////////////////////////////// |
| // |
| // Response handling: responses from the memory side |
| // |
| ///////////////////////////////////////////////////// |
| |
| |
| void |
| Cache::handleUncacheableWriteResp(PacketPtr pkt) |
| { |
| Tick completion_time = clockEdge(responseLatency) + |
| pkt->headerDelay + pkt->payloadDelay; |
| |
| // Reset the bus additional time as it is now accounted for |
| pkt->headerDelay = pkt->payloadDelay = 0; |
| |
| cpuSidePort->schedTimingResp(pkt, completion_time, true); |
| } |
| |
| void |
| Cache::recvTimingResp(PacketPtr pkt) |
| { |
| assert(pkt->isResponse()); |
| |
| // all header delay should be paid for by the crossbar, unless |
| // this is a prefetch response from above |
| panic_if(pkt->headerDelay != 0 && pkt->cmd != MemCmd::HardPFResp, |
| "%s saw a non-zero packet delay\n", name()); |
| |
| bool is_error = pkt->isError(); |
| |
| if (is_error) { |
| DPRINTF(Cache, "%s: Cache received %s with error\n", __func__, |
| pkt->print()); |
| } |
| |
| DPRINTF(Cache, "%s: Handling response %s\n", __func__, |
| pkt->print()); |
| |
| // if this is a write, we should be looking at an uncacheable |
| // write |
| if (pkt->isWrite()) { |
| assert(pkt->req->isUncacheable()); |
| handleUncacheableWriteResp(pkt); |
| return; |
| } |
| |
| // we have dealt with any (uncacheable) writes above, from here on |
| // we know we are dealing with an MSHR due to a miss or a prefetch |
| MSHR *mshr = dynamic_cast<MSHR*>(pkt->popSenderState()); |
| assert(mshr); |
| |
| if (mshr == noTargetMSHR) { |
| // we always clear at least one target |
| clearBlocked(Blocked_NoTargets); |
| noTargetMSHR = nullptr; |
| } |
| |
| // Initial target is used just for stats |
| MSHR::Target *initial_tgt = mshr->getTarget(); |
| int stats_cmd_idx = initial_tgt->pkt->cmdToIndex(); |
| Tick miss_latency = curTick() - initial_tgt->recvTime; |
| |
| if (pkt->req->isUncacheable()) { |
| assert(pkt->req->masterId() < system->maxMasters()); |
| mshr_uncacheable_lat[stats_cmd_idx][pkt->req->masterId()] += |
| miss_latency; |
| } else { |
| assert(pkt->req->masterId() < system->maxMasters()); |
| mshr_miss_latency[stats_cmd_idx][pkt->req->masterId()] += |
| miss_latency; |
| } |
| |
| bool wasFull = mshrQueue.isFull(); |
| |
| PacketList writebacks; |
| |
| Tick forward_time = clockEdge(forwardLatency) + pkt->headerDelay; |
| |
| bool is_fill = !mshr->isForward && |
| (pkt->isRead() || pkt->cmd == MemCmd::UpgradeResp); |
| |
| CacheBlk *blk = tags->findBlock(pkt->getAddr(), pkt->isSecure()); |
| const bool valid_blk = blk && blk->isValid(); |
| // If the response indicates that there are no sharers and we |
| // either had the block already or the response is filling we can |
| // promote our copy to writable |
| if (!pkt->hasSharers() && |
| (is_fill || (valid_blk && !pkt->req->isCacheInvalidate()))) { |
| mshr->promoteWritable(); |
| } |
| |
| if (is_fill && !is_error) { |
| DPRINTF(Cache, "Block for addr %#llx being updated in Cache\n", |
| pkt->getAddr()); |
| |
| blk = handleFill(pkt, blk, writebacks, mshr->allocOnFill()); |
| assert(blk != nullptr); |
| } |
| |
| // allow invalidation responses originating from write-line |
| // requests to be discarded |
| bool is_invalidate = pkt->isInvalidate(); |
| |
| // The block was marked as not readable while there was a pending |
| // cache maintenance operation, restore its flag. |
| if (pkt->isClean() && !is_invalidate && valid_blk) { |
| blk->status |= BlkReadable; |
| } |
| |
| // First offset for critical word first calculations |
| int initial_offset = initial_tgt->pkt->getOffset(blkSize); |
| |
| bool from_cache = false; |
| MSHR::TargetList targets = mshr->extractServiceableTargets(pkt); |
| for (auto &target: targets) { |
| Packet *tgt_pkt = target.pkt; |
| switch (target.source) { |
| case MSHR::Target::FromCPU: |
| Tick completion_time; |
| // Here we charge on completion_time the delay of the xbar if the |
| // packet comes from it, charged on headerDelay. |
| completion_time = pkt->headerDelay; |
| |
| // Software prefetch handling for cache closest to core |
| if (tgt_pkt->cmd.isSWPrefetch()) { |
| // a software prefetch would have already been ack'd |
| // immediately with dummy data so the core would be able to |
| // retire it. This request completes right here, so we |
| // deallocate it. |
| delete tgt_pkt->req; |
| delete tgt_pkt; |
| break; // skip response |
| } |
| |
| // keep track of whether we have responded to another |
| // cache |
| from_cache = from_cache || tgt_pkt->fromCache(); |
| |
| // unlike the other packet flows, where data is found in other |
| // caches or memory and brought back, write-line requests always |
| // have the data right away, so the above check for "is fill?" |
| // cannot actually be determined until examining the stored MSHR |
| // state. We "catch up" with that logic here, which is duplicated |
| // from above. |
| if (tgt_pkt->cmd == MemCmd::WriteLineReq) { |
| assert(!is_error); |
| // we got the block in a writable state, so promote |
| // any deferred targets if possible |
| mshr->promoteWritable(); |
| // NB: we use the original packet here and not the response! |
| blk = handleFill(tgt_pkt, blk, writebacks, |
| targets.allocOnFill); |
| assert(blk != nullptr); |
| |
| // treat as a fill, and discard the invalidation |
| // response |
| is_fill = true; |
| is_invalidate = false; |
| } |
| |
| if (is_fill) { |
| satisfyRequest(tgt_pkt, blk, true, mshr->hasPostDowngrade()); |
| |
| // How many bytes past the first request is this one |
| int transfer_offset = |
| tgt_pkt->getOffset(blkSize) - initial_offset; |
| if (transfer_offset < 0) { |
| transfer_offset += blkSize; |
| } |
| |
| // If not critical word (offset) return payloadDelay. |
| // responseLatency is the latency of the return path |
| // from lower level caches/memory to an upper level cache or |
| // the core. |
| completion_time += clockEdge(responseLatency) + |
| (transfer_offset ? pkt->payloadDelay : 0); |
| |
| assert(!tgt_pkt->req->isUncacheable()); |
| |
| assert(tgt_pkt->req->masterId() < system->maxMasters()); |
| missLatency[tgt_pkt->cmdToIndex()][tgt_pkt->req->masterId()] += |
| completion_time - target.recvTime; |
| } else if (pkt->cmd == MemCmd::UpgradeFailResp) { |
| // failed StoreCond upgrade |
| assert(tgt_pkt->cmd == MemCmd::StoreCondReq || |
| tgt_pkt->cmd == MemCmd::StoreCondFailReq || |
| tgt_pkt->cmd == MemCmd::SCUpgradeFailReq); |
| // responseLatency is the latency of the return path |
| // from lower level caches/memory to an upper level cache or |
| // the core. |
| completion_time += clockEdge(responseLatency) + |
| pkt->payloadDelay; |
| tgt_pkt->req->setExtraData(0); |
| } else { |
| // We are about to send a response to a cache above |
| // that asked for an invalidation; we need to |
| // invalidate our copy immediately as the most |
| // up-to-date copy of the block will now be in the |
| // cache above. It will also prevent this cache from |
| // responding (if the block was previously dirty) to |
| // snoops as they should snoop the caches above where |
| // they will get the response from. |
| if (is_invalidate && blk && blk->isValid()) { |
| invalidateBlock(blk); |
| } |
| // not a cache fill, just forwarding response |
| // responseLatency is the latency of the return path |
| // from lower level cahces/memory to the core. |
| completion_time += clockEdge(responseLatency) + |
| pkt->payloadDelay; |
| if (pkt->isRead() && !is_error) { |
| // sanity check |
| assert(pkt->getAddr() == tgt_pkt->getAddr()); |
| assert(pkt->getSize() >= tgt_pkt->getSize()); |
| |
| tgt_pkt->setData(pkt->getConstPtr<uint8_t>()); |
| } |
| } |
| tgt_pkt->makeTimingResponse(); |
| // if this packet is an error copy that to the new packet |
| if (is_error) |
| tgt_pkt->copyError(pkt); |
| if (tgt_pkt->cmd == MemCmd::ReadResp && |
| (is_invalidate || mshr->hasPostInvalidate())) { |
| // If intermediate cache got ReadRespWithInvalidate, |
| // propagate that. Response should not have |
| // isInvalidate() set otherwise. |
| tgt_pkt->cmd = MemCmd::ReadRespWithInvalidate; |
| DPRINTF(Cache, "%s: updated cmd to %s\n", __func__, |
| tgt_pkt->print()); |
| } |
| // Reset the bus additional time as it is now accounted for |
| tgt_pkt->headerDelay = tgt_pkt->payloadDelay = 0; |
| cpuSidePort->schedTimingResp(tgt_pkt, completion_time, true); |
| break; |
| |
| case MSHR::Target::FromPrefetcher: |
| assert(tgt_pkt->cmd == MemCmd::HardPFReq); |
| if (blk) |
| blk->status |= BlkHWPrefetched; |
| delete tgt_pkt->req; |
| delete tgt_pkt; |
| break; |
| |
| case MSHR::Target::FromSnoop: |
| // I don't believe that a snoop can be in an error state |
| assert(!is_error); |
| // response to snoop request |
| DPRINTF(Cache, "processing deferred snoop...\n"); |
| // If the response is invalidating, a snooping target can |
| // be satisfied if it is also invalidating. If the reponse is, not |
| // only invalidating, but more specifically an InvalidateResp and |
| // the MSHR was created due to an InvalidateReq then a cache above |
| // is waiting to satisfy a WriteLineReq. In this case even an |
| // non-invalidating snoop is added as a target here since this is |
| // the ordering point. When the InvalidateResp reaches this cache, |
| // the snooping target will snoop further the cache above with the |
| // WriteLineReq. |
| assert(!is_invalidate || pkt->cmd == MemCmd::InvalidateResp || |
| pkt->req->isCacheMaintenance() || |
| mshr->hasPostInvalidate()); |
| handleSnoop(tgt_pkt, blk, true, true, mshr->hasPostInvalidate()); |
| break; |
| |
| default: |
| panic("Illegal target->source enum %d\n", target.source); |
| } |
| } |
| |
| maintainClusivity(from_cache, blk); |
| |
| if (blk && blk->isValid()) { |
| // an invalidate response stemming from a write line request |
| // should not invalidate the block, so check if the |
| // invalidation should be discarded |
| if (is_invalidate || mshr->hasPostInvalidate()) { |
| invalidateBlock(blk); |
| } else if (mshr->hasPostDowngrade()) { |
| blk->status &= ~BlkWritable; |
| } |
| } |
| |
| if (mshr->promoteDeferredTargets()) { |
| // avoid later read getting stale data while write miss is |
| // outstanding.. see comment in timingAccess() |
| if (blk) { |
| blk->status &= ~BlkReadable; |
| } |
| mshrQueue.markPending(mshr); |
| schedMemSideSendEvent(clockEdge() + pkt->payloadDelay); |
| } else { |
| mshrQueue.deallocate(mshr); |
| if (wasFull && !mshrQueue.isFull()) { |
| clearBlocked(Blocked_NoMSHRs); |
| } |
| |
| // Request the bus for a prefetch if this deallocation freed enough |
| // MSHRs for a prefetch to take place |
| if (prefetcher && mshrQueue.canPrefetch()) { |
| Tick next_pf_time = std::max(prefetcher->nextPrefetchReadyTime(), |
| clockEdge()); |
| if (next_pf_time != MaxTick) |
| schedMemSideSendEvent(next_pf_time); |
| } |
| } |
| // reset the xbar additional timinig as it is now accounted for |
| pkt->headerDelay = pkt->payloadDelay = 0; |
| |
| // copy writebacks to write buffer |
| doWritebacks(writebacks, forward_time); |
| |
| // if we used temp block, check to see if its valid and then clear it out |
| if (blk == tempBlock && tempBlock->isValid()) { |
| // We use forwardLatency here because we are copying |
| // Writebacks/CleanEvicts to write buffer. It specifies the latency to |
| // allocate an internal buffer and to schedule an event to the |
| // queued port. |
| if (blk->isDirty() || writebackClean) { |
| PacketPtr wbPkt = writebackBlk(blk); |
| allocateWriteBuffer(wbPkt, forward_time); |
| // Set BLOCK_CACHED flag if cached above. |
| if (isCachedAbove(wbPkt)) |
| wbPkt->setBlockCached(); |
| } else { |
| PacketPtr wcPkt = cleanEvictBlk(blk); |
| // Check to see if block is cached above. If not allocate |
| // write buffer |
| if (isCachedAbove(wcPkt)) |
| delete wcPkt; |
| else |
| allocateWriteBuffer(wcPkt, forward_time); |
| } |
| invalidateBlock(blk); |
| } |
| |
| DPRINTF(CacheVerbose, "%s: Leaving with %s\n", __func__, pkt->print()); |
| delete pkt; |
| } |
| |
| PacketPtr |
| Cache::writebackBlk(CacheBlk *blk) |
| { |
| chatty_assert(!isReadOnly || writebackClean, |
| "Writeback from read-only cache"); |
| assert(blk && blk->isValid() && (blk->isDirty() || writebackClean)); |
| |
| writebacks[Request::wbMasterId]++; |
| |
| Request *req = new Request(tags->regenerateBlkAddr(blk->tag, blk->set), |
| blkSize, 0, Request::wbMasterId); |
| if (blk->isSecure()) |
| req->setFlags(Request::SECURE); |
| |
| req->taskId(blk->task_id); |
| blk->task_id= ContextSwitchTaskId::Unknown; |
| blk->tickInserted = curTick(); |
| |
| PacketPtr pkt = |
| new Packet(req, blk->isDirty() ? |
| MemCmd::WritebackDirty : MemCmd::WritebackClean); |
| |
| DPRINTF(Cache, "Create Writeback %s writable: %d, dirty: %d\n", |
| pkt->print(), blk->isWritable(), blk->isDirty()); |
| |
| if (blk->isWritable()) { |
| // not asserting shared means we pass the block in modified |
| // state, mark our own block non-writeable |
| blk->status &= ~BlkWritable; |
| } else { |
| // we are in the Owned state, tell the receiver |
| pkt->setHasSharers(); |
| } |
| |
| // make sure the block is not marked dirty |
| blk->status &= ~BlkDirty; |
| |
| pkt->allocate(); |
| std::memcpy(pkt->getPtr<uint8_t>(), blk->data, blkSize); |
| |
| return pkt; |
| } |
| |
| PacketPtr |
| Cache::writecleanBlk(CacheBlk *blk, Request::Flags dest, PacketId id) |
| { |
| Request *req = new Request(tags->regenerateBlkAddr(blk->tag, blk->set), |
| blkSize, 0, Request::wbMasterId); |
| if (blk->isSecure()) { |
| req->setFlags(Request::SECURE); |
| } |
| req->taskId(blk->task_id); |
| |
| PacketPtr pkt = new Packet(req, MemCmd::WriteClean, blkSize, id); |
| |
| if (dest) { |
| req->setFlags(dest); |
| pkt->setWriteThrough(); |
| } |
| |
| DPRINTF(Cache, "Create %s writable: %d, dirty: %d\n", pkt->print(), |
| blk->isWritable(), blk->isDirty()); |
| |
| if (blk->isWritable()) { |
| // not asserting shared means we pass the block in modified |
| // state, mark our own block non-writeable |
| blk->status &= ~BlkWritable; |
| } else { |
| // we are in the Owned state, tell the receiver |
| pkt->setHasSharers(); |
| } |
| |
| // make sure the block is not marked dirty |
| blk->status &= ~BlkDirty; |
| |
| pkt->allocate(); |
| std::memcpy(pkt->getPtr<uint8_t>(), blk->data, blkSize); |
| |
| return pkt; |
| } |
| |
| |
| PacketPtr |
| Cache::cleanEvictBlk(CacheBlk *blk) |
| { |
| assert(!writebackClean); |
| assert(blk && blk->isValid() && !blk->isDirty()); |
| // Creating a zero sized write, a message to the snoop filter |
| Request *req = |
| new Request(tags->regenerateBlkAddr(blk->tag, blk->set), blkSize, 0, |
| Request::wbMasterId); |
| if (blk->isSecure()) |
| req->setFlags(Request::SECURE); |
| |
| req->taskId(blk->task_id); |
| blk->task_id = ContextSwitchTaskId::Unknown; |
| blk->tickInserted = curTick(); |
| |
| PacketPtr pkt = new Packet(req, MemCmd::CleanEvict); |
| pkt->allocate(); |
| DPRINTF(Cache, "Create CleanEvict %s\n", pkt->print()); |
| |
| return pkt; |
| } |
| |
| void |
| Cache::memWriteback() |
| { |
| CacheBlkVisitorWrapper visitor(*this, &Cache::writebackVisitor); |
| tags->forEachBlk(visitor); |
| } |
| |
| void |
| Cache::memInvalidate() |
| { |
| CacheBlkVisitorWrapper visitor(*this, &Cache::invalidateVisitor); |
| tags->forEachBlk(visitor); |
| } |
| |
| bool |
| Cache::isDirty() const |
| { |
| CacheBlkIsDirtyVisitor visitor; |
| tags->forEachBlk(visitor); |
| |
| return visitor.isDirty(); |
| } |
| |
| bool |
| Cache::writebackVisitor(CacheBlk &blk) |
| { |
| if (blk.isDirty()) { |
| assert(blk.isValid()); |
| |
| Request request(tags->regenerateBlkAddr(blk.tag, blk.set), |
| blkSize, 0, Request::funcMasterId); |
| request.taskId(blk.task_id); |
| if (blk.isSecure()) { |
| request.setFlags(Request::SECURE); |
| } |
| |
| Packet packet(&request, MemCmd::WriteReq); |
| packet.dataStatic(blk.data); |
| |
| memSidePort->sendFunctional(&packet); |
| |
| blk.status &= ~BlkDirty; |
| } |
| |
| return true; |
| } |
| |
| bool |
| Cache::invalidateVisitor(CacheBlk &blk) |
| { |
| |
| if (blk.isDirty()) |
| warn_once("Invalidating dirty cache lines. Expect things to break.\n"); |
| |
| if (blk.isValid()) { |
| assert(!blk.isDirty()); |
| invalidateBlock(&blk); |
| } |
| |
| return true; |
| } |
| |
| CacheBlk* |
| Cache::allocateBlock(Addr addr, bool is_secure, PacketList &writebacks) |
| { |
| CacheBlk *blk = tags->findVictim(addr); |
| |
| // It is valid to return nullptr if there is no victim |
| if (!blk) |
| return nullptr; |
| |
| if (blk->isValid()) { |
| Addr repl_addr = tags->regenerateBlkAddr(blk->tag, blk->set); |
| MSHR *repl_mshr = mshrQueue.findMatch(repl_addr, blk->isSecure()); |
| if (repl_mshr) { |
| // must be an outstanding upgrade request |
| // on a block we're about to replace... |
| assert(!blk->isWritable() || blk->isDirty()); |
| assert(repl_mshr->needsWritable()); |
| // too hard to replace block with transient state |
| // allocation failed, block not inserted |
| return nullptr; |
| } else { |
| DPRINTF(Cache, "replacement: replacing %#llx (%s) with %#llx " |
| "(%s): %s\n", repl_addr, blk->isSecure() ? "s" : "ns", |
| addr, is_secure ? "s" : "ns", |
| blk->isDirty() ? "writeback" : "clean"); |
| |
| if (blk->wasPrefetched()) { |
| unusedPrefetches++; |
| } |
| // Will send up Writeback/CleanEvict snoops via isCachedAbove |
| // when pushing this writeback list into the write buffer. |
| if (blk->isDirty() || writebackClean) { |
| // Save writeback packet for handling by caller |
| writebacks.push_back(writebackBlk(blk)); |
| } else { |
| writebacks.push_back(cleanEvictBlk(blk)); |
| } |
| } |
| } |
| |
| return blk; |
| } |
| |
| void |
| Cache::invalidateBlock(CacheBlk *blk) |
| { |
| if (blk != tempBlock) |
| tags->invalidate(blk); |
| blk->invalidate(); |
| } |
| |
| // Note that the reason we return a list of writebacks rather than |
| // inserting them directly in the write buffer is that this function |
| // is called by both atomic and timing-mode accesses, and in atomic |
| // mode we don't mess with the write buffer (we just perform the |
| // writebacks atomically once the original request is complete). |
| CacheBlk* |
| Cache::handleFill(PacketPtr pkt, CacheBlk *blk, PacketList &writebacks, |
| bool allocate) |
| { |
| assert(pkt->isResponse() || pkt->cmd == MemCmd::WriteLineReq); |
| Addr addr = pkt->getAddr(); |
| bool is_secure = pkt->isSecure(); |
| #if TRACING_ON |
| CacheBlk::State old_state = blk ? blk->status : 0; |
| #endif |
| |
| // When handling a fill, we should have no writes to this line. |
| assert(addr == pkt->getBlockAddr(blkSize)); |
| assert(!writeBuffer.findMatch(addr, is_secure)); |
| |
| if (blk == nullptr) { |
| // better have read new data... |
| assert(pkt->hasData()); |
| |
| // only read responses and write-line requests have data; |
| // note that we don't write the data here for write-line - that |
| // happens in the subsequent call to satisfyRequest |
| assert(pkt->isRead() || pkt->cmd == MemCmd::WriteLineReq); |
| |
| // need to do a replacement if allocating, otherwise we stick |
| // with the temporary storage |
| blk = allocate ? allocateBlock(addr, is_secure, writebacks) : nullptr; |
| |
| if (blk == nullptr) { |
| // No replaceable block or a mostly exclusive |
| // cache... just use temporary storage to complete the |
| // current request and then get rid of it |
| assert(!tempBlock->isValid()); |
| blk = tempBlock; |
| tempBlock->set = tags->extractSet(addr); |
| tempBlock->tag = tags->extractTag(addr); |
| // @todo: set security state as well... |
| DPRINTF(Cache, "using temp block for %#llx (%s)\n", addr, |
| is_secure ? "s" : "ns"); |
| } else { |
| tags->insertBlock(pkt, blk); |
| } |
| |
| // we should never be overwriting a valid block |
| assert(!blk->isValid()); |
| } else { |
| // existing block... probably an upgrade |
| assert(blk->tag == tags->extractTag(addr)); |
| // either we're getting new data or the block should already be valid |
| assert(pkt->hasData() || blk->isValid()); |
| // don't clear block status... if block is already dirty we |
| // don't want to lose that |
| } |
| |
| if (is_secure) |
| blk->status |= BlkSecure; |
| blk->status |= BlkValid | BlkReadable; |
| |
| // sanity check for whole-line writes, which should always be |
| // marked as writable as part of the fill, and then later marked |
| // dirty as part of satisfyRequest |
| if (pkt->cmd == MemCmd::WriteLineReq) { |
| assert(!pkt->hasSharers()); |
| } |
| |
| // here we deal with setting the appropriate state of the line, |
| // and we start by looking at the hasSharers flag, and ignore the |
| // cacheResponding flag (normally signalling dirty data) if the |
| // packet has sharers, thus the line is never allocated as Owned |
| // (dirty but not writable), and always ends up being either |
| // Shared, Exclusive or Modified, see Packet::setCacheResponding |
| // for more details |
| if (!pkt->hasSharers()) { |
| // we could get a writable line from memory (rather than a |
| // cache) even in a read-only cache, note that we set this bit |
| // even for a read-only cache, possibly revisit this decision |
| blk->status |= BlkWritable; |
| |
| // check if we got this via cache-to-cache transfer (i.e., from a |
| // cache that had the block in Modified or Owned state) |
| if (pkt->cacheResponding()) { |
| // we got the block in Modified state, and invalidated the |
| // owners copy |
| blk->status |= BlkDirty; |
| |
| chatty_assert(!isReadOnly, "Should never see dirty snoop response " |
| "in read-only cache %s\n", name()); |
| } |
| } |
| |
| DPRINTF(Cache, "Block addr %#llx (%s) moving from state %x to %s\n", |
| addr, is_secure ? "s" : "ns", old_state, blk->print()); |
| |
| // if we got new data, copy it in (checking for a read response |
| // and a response that has data is the same in the end) |
| if (pkt->isRead()) { |
| // sanity checks |
| assert(pkt->hasData()); |
| assert(pkt->getSize() == blkSize); |
| |
| std::memcpy(blk->data, pkt->getConstPtr<uint8_t>(), blkSize); |
| } |
| // We pay for fillLatency here. |
| blk->whenReady = clockEdge() + fillLatency * clockPeriod() + |
| pkt->payloadDelay; |
| |
| return blk; |
| } |
| |
| |
| ///////////////////////////////////////////////////// |
| // |
| // Snoop path: requests coming in from the memory side |
| // |
| ///////////////////////////////////////////////////// |
| |
| void |
| Cache::doTimingSupplyResponse(PacketPtr req_pkt, const uint8_t *blk_data, |
| bool already_copied, bool pending_inval) |
| { |
| // sanity check |
| assert(req_pkt->isRequest()); |
| assert(req_pkt->needsResponse()); |
| |
| DPRINTF(Cache, "%s: for %s\n", __func__, req_pkt->print()); |
| // timing-mode snoop responses require a new packet, unless we |
| // already made a copy... |
| PacketPtr pkt = req_pkt; |
| if (!already_copied) |
| // do not clear flags, and allocate space for data if the |
| // packet needs it (the only packets that carry data are read |
| // responses) |
| pkt = new Packet(req_pkt, false, req_pkt->isRead()); |
| |
| assert(req_pkt->req->isUncacheable() || req_pkt->isInvalidate() || |
| pkt->hasSharers()); |
| pkt->makeTimingResponse(); |
| if (pkt->isRead()) { |
| pkt->setDataFromBlock(blk_data, blkSize); |
| } |
| if (pkt->cmd == MemCmd::ReadResp && pending_inval) { |
| // Assume we defer a response to a read from a far-away cache |
| // A, then later defer a ReadExcl from a cache B on the same |
| // bus as us. We'll assert cacheResponding in both cases, but |
| // in the latter case cacheResponding will keep the |
| // invalidation from reaching cache A. This special response |
| // tells cache A that it gets the block to satisfy its read, |
| // but must immediately invalidate it. |
| pkt->cmd = MemCmd::ReadRespWithInvalidate; |
| } |
| // Here we consider forward_time, paying for just forward latency and |
| // also charging the delay provided by the xbar. |
| // forward_time is used as send_time in next allocateWriteBuffer(). |
| Tick forward_time = clockEdge(forwardLatency) + pkt->headerDelay; |
| // Here we reset the timing of the packet. |
| pkt->headerDelay = pkt->payloadDelay = 0; |
| DPRINTF(CacheVerbose, "%s: created response: %s tick: %lu\n", __func__, |
| pkt->print(), forward_time); |
| memSidePort->schedTimingSnoopResp(pkt, forward_time, true); |
| } |
| |
| uint32_t |
| Cache::handleSnoop(PacketPtr pkt, CacheBlk *blk, bool is_timing, |
| bool is_deferred, bool pending_inval) |
| { |
| DPRINTF(CacheVerbose, "%s: for %s\n", __func__, pkt->print()); |
| // deferred snoops can only happen in timing mode |
| assert(!(is_deferred && !is_timing)); |
| // pending_inval only makes sense on deferred snoops |
| assert(!(pending_inval && !is_deferred)); |
| assert(pkt->isRequest()); |
| |
| // the packet may get modified if we or a forwarded snooper |
| // responds in atomic mode, so remember a few things about the |
| // original packet up front |
| bool invalidate = pkt->isInvalidate(); |
| bool M5_VAR_USED needs_writable = pkt->needsWritable(); |
| |
| // at the moment we could get an uncacheable write which does not |
| // have the invalidate flag, and we need a suitable way of dealing |
| // with this case |
| panic_if(invalidate && pkt->req->isUncacheable(), |
| "%s got an invalidating uncacheable snoop request %s", |
| name(), pkt->print()); |
| |
| uint32_t snoop_delay = 0; |
| |
| if (forwardSnoops) { |
| // first propagate snoop upward to see if anyone above us wants to |
| // handle it. save & restore packet src since it will get |
| // rewritten to be relative to cpu-side bus (if any) |
| bool alreadyResponded = pkt->cacheResponding(); |
| if (is_timing) { |
| // copy the packet so that we can clear any flags before |
| // forwarding it upwards, we also allocate data (passing |
| // the pointer along in case of static data), in case |
| // there is a snoop hit in upper levels |
| Packet snoopPkt(pkt, true, true); |
| snoopPkt.setExpressSnoop(); |
| // the snoop packet does not need to wait any additional |
| // time |
| snoopPkt.headerDelay = snoopPkt.payloadDelay = 0; |
| cpuSidePort->sendTimingSnoopReq(&snoopPkt); |
| |
| // add the header delay (including crossbar and snoop |
| // delays) of the upward snoop to the snoop delay for this |
| // cache |
| snoop_delay += snoopPkt.headerDelay; |
| |
| if (snoopPkt.cacheResponding()) { |
| // cache-to-cache response from some upper cache |
| assert(!alreadyResponded); |
| pkt->setCacheResponding(); |
| } |
| // upstream cache has the block, or has an outstanding |
| // MSHR, pass the flag on |
| if (snoopPkt.hasSharers()) { |
| pkt->setHasSharers(); |
| } |
| // If this request is a prefetch or clean evict and an upper level |
| // signals block present, make sure to propagate the block |
| // presence to the requester. |
| if (snoopPkt.isBlockCached()) { |
| pkt->setBlockCached(); |
| } |
| // If the request was satisfied by snooping the cache |
| // above, mark the original packet as satisfied too. |
| if (snoopPkt.satisfied()) { |
| pkt->setSatisfied(); |
| } |
| } else { |
| cpuSidePort->sendAtomicSnoop(pkt); |
| if (!alreadyResponded && pkt->cacheResponding()) { |
| // cache-to-cache response from some upper cache: |
| // forward response to original requester |
| assert(pkt->isResponse()); |
| } |
| } |
| } |
| |
| bool respond = false; |
| bool blk_valid = blk && blk->isValid(); |
| if (pkt->isClean()) { |
| if (blk_valid && blk->isDirty()) { |
| DPRINTF(CacheVerbose, "%s: packet (snoop) %s found block: %s\n", |
| __func__, pkt->print(), blk->print()); |
| PacketPtr wb_pkt = writecleanBlk(blk, pkt->req->getDest(), pkt->id); |
| PacketList writebacks; |
| writebacks.push_back(wb_pkt); |
| |
| if (is_timing) { |
| // anything that is merely forwarded pays for the forward |
| // latency and the delay provided by the crossbar |
| Tick forward_time = clockEdge(forwardLatency) + |
| pkt->headerDelay; |
| doWritebacks(writebacks, forward_time); |
| } else { |
| doWritebacksAtomic(writebacks); |
| } |
| pkt->setSatisfied(); |
| } |
| } else if (!blk_valid) { |
| DPRINTF(CacheVerbose, "%s: snoop miss for %s\n", __func__, |
| pkt->print()); |
| if (is_deferred) { |
| // we no longer have the block, and will not respond, but a |
| // packet was allocated in MSHR::handleSnoop and we have |
| // to delete it |
| assert(pkt->needsResponse()); |
| |
| // we have passed the block to a cache upstream, that |
| // cache should be responding |
| assert(pkt->cacheResponding()); |
| |
| delete pkt; |
| } |
| return snoop_delay; |
| } else { |
| DPRINTF(Cache, "%s: snoop hit for %s, old state is %s\n", __func__, |
| pkt->print(), blk->print()); |
| |
| // We may end up modifying both the block state and the packet (if |
| // we respond in atomic mode), so just figure out what to do now |
| // and then do it later. We respond to all snoops that need |
| // responses provided we have the block in dirty state. The |
| // invalidation itself is taken care of below. We don't respond to |
| // cache maintenance operations as this is done by the destination |
| // xbar. |
| respond = blk->isDirty() && pkt->needsResponse(); |
| |
| chatty_assert(!(isReadOnly && blk->isDirty()), "Should never have " |
| "a dirty block in a read-only cache %s\n", name()); |
| } |
| |
| // Invalidate any prefetch's from below that would strip write permissions |
| // MemCmd::HardPFReq is only observed by upstream caches. After missing |
| // above and in it's own cache, a new MemCmd::ReadReq is created that |
| // downstream caches observe. |
| if (pkt->mustCheckAbove()) { |
| DPRINTF(Cache, "Found addr %#llx in upper level cache for snoop %s " |
| "from lower cache\n", pkt->getAddr(), pkt->print()); |
| pkt->setBlockCached(); |
| return snoop_delay; |
| } |
| |
| if (pkt->isRead() && !invalidate) { |
| // reading without requiring the line in a writable state |
| assert(!needs_writable); |
| pkt->setHasSharers(); |
| |
| // if the requesting packet is uncacheable, retain the line in |
| // the current state, otherwhise unset the writable flag, |
| // which means we go from Modified to Owned (and will respond |
| // below), remain in Owned (and will respond below), from |
| // Exclusive to Shared, or remain in Shared |
| if (!pkt->req->isUncacheable()) |
| blk->status &= ~BlkWritable; |
| DPRINTF(Cache, "new state is %s\n", blk->print()); |
| } |
| |
| if (respond) { |
| // prevent anyone else from responding, cache as well as |
| // memory, and also prevent any memory from even seeing the |
| // request |
| pkt->setCacheResponding(); |
| if (!pkt->isClean() && blk->isWritable()) { |
| // inform the cache hierarchy that this cache had the line |
| // in the Modified state so that we avoid unnecessary |
| // invalidations (see Packet::setResponderHadWritable) |
| pkt->setResponderHadWritable(); |
| |
| // in the case of an uncacheable request there is no point |
| // in setting the responderHadWritable flag, but since the |
| // recipient does not care there is no harm in doing so |
| } else { |
| // if the packet has needsWritable set we invalidate our |
| // copy below and all other copies will be invalidates |
| // through express snoops, and if needsWritable is not set |
| // we already called setHasSharers above |
| } |
| |
| // if we are returning a writable and dirty (Modified) line, |
| // we should be invalidating the line |
| panic_if(!invalidate && !pkt->hasSharers(), |
| "%s is passing a Modified line through %s, " |
| "but keeping the block", name(), pkt->print()); |
| |
| if (is_timing) { |
| doTimingSupplyResponse(pkt, blk->data, is_deferred, pending_inval); |
| } else { |
| pkt->makeAtomicResponse(); |
| // packets such as upgrades do not actually have any data |
| // payload |
| if (pkt->hasData()) |
| pkt->setDataFromBlock(blk->data, blkSize); |
| } |
| } |
| |
| if (!respond && is_deferred) { |
| assert(pkt->needsResponse()); |
| |
| // if we copied the deferred packet with the intention to |
| // respond, but are not responding, then a cache above us must |
| // be, and we can use this as the indication of whether this |
| // is a packet where we created a copy of the request or not |
| if (!pkt->cacheResponding()) { |
| delete pkt->req; |
| } |
| |
| delete pkt; |
| } |
| |
| // Do this last in case it deallocates block data or something |
| // like that |
| if (blk_valid && invalidate) { |
| invalidateBlock(blk); |
| DPRINTF(Cache, "new state is %s\n", blk->print()); |
| } |
| |
| return snoop_delay; |
| } |
| |
| |
| void |
| Cache::recvTimingSnoopReq(PacketPtr pkt) |
| { |
| DPRINTF(CacheVerbose, "%s: for %s\n", __func__, pkt->print()); |
| |
| // Snoops shouldn't happen when bypassing caches |
| assert(!system->bypassCaches()); |
| |
| // no need to snoop requests that are not in range |
| if (!inRange(pkt->getAddr())) { |
| return; |
| } |
| |
| bool is_secure = pkt->isSecure(); |
| CacheBlk *blk = tags->findBlock(pkt->getAddr(), is_secure); |
| |
| Addr blk_addr = pkt->getBlockAddr(blkSize); |
| MSHR *mshr = mshrQueue.findMatch(blk_addr, is_secure); |
| |
| // Update the latency cost of the snoop so that the crossbar can |
| // account for it. Do not overwrite what other neighbouring caches |
| // have already done, rather take the maximum. The update is |
| // tentative, for cases where we return before an upward snoop |
| // happens below. |
| pkt->snoopDelay = std::max<uint32_t>(pkt->snoopDelay, |
| lookupLatency * clockPeriod()); |
| |
| // Inform request(Prefetch, CleanEvict or Writeback) from below of |
| // MSHR hit, set setBlockCached. |
| if (mshr && pkt->mustCheckAbove()) { |
| DPRINTF(Cache, "Setting block cached for %s from lower cache on " |
| "mshr hit\n", pkt->print()); |
| pkt->setBlockCached(); |
| return; |
| } |
| |
| // Bypass any existing cache maintenance requests if the request |
| // has been satisfied already (i.e., the dirty block has been |
| // found). |
| if (mshr && pkt->req->isCacheMaintenance() && pkt->satisfied()) { |
| return; |
| } |
| |
| // Let the MSHR itself track the snoop and decide whether we want |
| // to go ahead and do the regular cache snoop |
| if (mshr && mshr->handleSnoop(pkt, order++)) { |
| DPRINTF(Cache, "Deferring snoop on in-service MSHR to blk %#llx (%s)." |
| "mshrs: %s\n", blk_addr, is_secure ? "s" : "ns", |
| mshr->print()); |
| |
| if (mshr->getNumTargets() > numTarget) |
| warn("allocating bonus target for snoop"); //handle later |
| return; |
| } |
| |
| //We also need to check the writeback buffers and handle those |
| WriteQueueEntry *wb_entry = writeBuffer.findMatch(blk_addr, is_secure); |
| if (wb_entry) { |
| DPRINTF(Cache, "Snoop hit in writeback to addr %#llx (%s)\n", |
| pkt->getAddr(), is_secure ? "s" : "ns"); |
| // Expect to see only Writebacks and/or CleanEvicts here, both of |
| // which should not be generated for uncacheable data. |
| assert(!wb_entry->isUncacheable()); |
| // There should only be a single request responsible for generating |
| // Writebacks/CleanEvicts. |
| assert(wb_entry->getNumTargets() == 1); |
| PacketPtr wb_pkt = wb_entry->getTarget()->pkt; |
| assert(wb_pkt->isEviction() || wb_pkt->cmd == MemCmd::WriteClean); |
| |
| if (pkt->isEviction()) { |
| // if the block is found in the write queue, set the BLOCK_CACHED |
| // flag for Writeback/CleanEvict snoop. On return the snoop will |
| // propagate the BLOCK_CACHED flag in Writeback packets and prevent |
| // any CleanEvicts from travelling down the memory hierarchy. |
| pkt->setBlockCached(); |
| DPRINTF(Cache, "%s: Squashing %s from lower cache on writequeue " |
| "hit\n", __func__, pkt->print()); |
| return; |
| } |
| |
| // conceptually writebacks are no different to other blocks in |
| // this cache, so the behaviour is modelled after handleSnoop, |
| // the difference being that instead of querying the block |
| // state to determine if it is dirty and writable, we use the |
| // command and fields of the writeback packet |
| bool respond = wb_pkt->cmd == MemCmd::WritebackDirty && |
| pkt->needsResponse(); |
| bool have_writable = !wb_pkt->hasSharers(); |
| bool invalidate = pkt->isInvalidate(); |
| |
| if (!pkt->req->isUncacheable() && pkt->isRead() && !invalidate) { |
| assert(!pkt->needsWritable()); |
| pkt->setHasSharers(); |
| wb_pkt->setHasSharers(); |
| } |
| |
| if (respond) { |
| pkt->setCacheResponding(); |
| |
| if (have_writable) { |
| pkt->setResponderHadWritable(); |
| } |
| |
| doTimingSupplyResponse(pkt, wb_pkt->getConstPtr<uint8_t>(), |
| false, false); |
| } |
| |
| if (invalidate && wb_pkt->cmd != MemCmd::WriteClean) { |
| // Invalidation trumps our writeback... discard here |
| // Note: markInService will remove entry from writeback buffer. |
| markInService(wb_entry); |
| delete wb_pkt; |
| } |
| } |
| |
| // If this was a shared writeback, there may still be |
| // other shared copies above that require invalidation. |
| // We could be more selective and return here if the |
| // request is non-exclusive or if the writeback is |
| // exclusive. |
| uint32_t snoop_delay = handleSnoop(pkt, blk, true, false, false); |
| |
| // Override what we did when we first saw the snoop, as we now |
| // also have the cost of the upwards snoops to account for |
| pkt->snoopDelay = std::max<uint32_t>(pkt->snoopDelay, snoop_delay + |
| lookupLatency * clockPeriod()); |
| } |
| |
| bool |
| Cache::CpuSidePort::recvTimingSnoopResp(PacketPtr pkt) |
| { |
| // Express snoop responses from master to slave, e.g., from L1 to L2 |
| cache->recvTimingSnoopResp(pkt); |
| return true; |
| } |
| |
| Tick |
| Cache::recvAtomicSnoop(PacketPtr pkt) |
| { |
| // Snoops shouldn't happen when bypassing caches |
| assert(!system->bypassCaches()); |
| |
| // no need to snoop requests that are not in range. |
| if (!inRange(pkt->getAddr())) { |
| return 0; |
| } |
| |
| CacheBlk *blk = tags->findBlock(pkt->getAddr(), pkt->isSecure()); |
| uint32_t snoop_delay = handleSnoop(pkt, blk, false, false, false); |
| return snoop_delay + lookupLatency * clockPeriod(); |
| } |
| |
| |
| QueueEntry* |
| Cache::getNextQueueEntry() |
| { |
| // Check both MSHR queue and write buffer for potential requests, |
| // note that null does not mean there is no request, it could |
| // simply be that it is not ready |
| MSHR *miss_mshr = mshrQueue.getNext(); |
| WriteQueueEntry *wq_entry = writeBuffer.getNext(); |
| |
| // If we got a write buffer request ready, first priority is a |
| // full write buffer, otherwise we favour the miss requests |
| if (wq_entry && (writeBuffer.isFull() || !miss_mshr)) { |
| // need to search MSHR queue for conflicting earlier miss. |
| MSHR *conflict_mshr = |
| mshrQueue.findPending(wq_entry->blkAddr, |
| wq_entry->isSecure); |
| |
| if (conflict_mshr && conflict_mshr->order < wq_entry->order) { |
| // Service misses in order until conflict is cleared. |
| return conflict_mshr; |
| |
| // @todo Note that we ignore the ready time of the conflict here |
| } |
| |
| // No conflicts; issue write |
| return wq_entry; |
| } else if (miss_mshr) { |
| // need to check for conflicting earlier writeback |
| WriteQueueEntry *conflict_mshr = |
| writeBuffer.findPending(miss_mshr->blkAddr, |
| miss_mshr->isSecure); |
| if (conflict_mshr) { |
| // not sure why we don't check order here... it was in the |
| // original code but commented out. |
| |
| // The only way this happens is if we are |
| // doing a write and we didn't have permissions |
| // then subsequently saw a writeback (owned got evicted) |
| // We need to make sure to perform the writeback first |
| // To preserve the dirty data, then we can issue the write |
| |
| // should we return wq_entry here instead? I.e. do we |
| // have to flush writes in order? I don't think so... not |
| // for Alpha anyway. Maybe for x86? |
| return conflict_mshr; |
| |
| // @todo Note that we ignore the ready time of the conflict here |
| } |
| |
| // No conflicts; issue read |
| return miss_mshr; |
| } |
| |
| // fall through... no pending requests. Try a prefetch. |
| assert(!miss_mshr && !wq_entry); |
| if (prefetcher && mshrQueue.canPrefetch()) { |
| // If we have a miss queue slot, we can try a prefetch |
| PacketPtr pkt = prefetcher->getPacket(); |
| if (pkt) { |
| Addr pf_addr = pkt->getBlockAddr(blkSize); |
| if (!tags->findBlock(pf_addr, pkt->isSecure()) && |
| !mshrQueue.findMatch(pf_addr, pkt->isSecure()) && |
| !writeBuffer.findMatch(pf_addr, pkt->isSecure())) { |
| // Update statistic on number of prefetches issued |
| // (hwpf_mshr_misses) |
| assert(pkt->req->masterId() < system->maxMasters()); |
| mshr_misses[pkt->cmdToIndex()][pkt->req->masterId()]++; |
| |
| // allocate an MSHR and return it, note |
| // that we send the packet straight away, so do not |
| // schedule the send |
| return allocateMissBuffer(pkt, curTick(), false); |
| } else { |
| // free the request and packet |
| delete pkt->req; |
| delete pkt; |
| } |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| bool |
| Cache::isCachedAbove(PacketPtr pkt, bool is_timing) const |
| { |
| if (!forwardSnoops) |
| return false; |
| // Mirroring the flow of HardPFReqs, the cache sends CleanEvict and |
| // Writeback snoops into upper level caches to check for copies of the |
| // same block. Using the BLOCK_CACHED flag with the Writeback/CleanEvict |
| // packet, the cache can inform the crossbar below of presence or absence |
| // of the block. |
| if (is_timing) { |
| Packet snoop_pkt(pkt, true, false); |
| snoop_pkt.setExpressSnoop(); |
| // Assert that packet is either Writeback or CleanEvict and not a |
| // prefetch request because prefetch requests need an MSHR and may |
| // generate a snoop response. |
| assert(pkt->isEviction() || pkt->cmd == MemCmd::WriteClean); |
| snoop_pkt.senderState = nullptr; |
| cpuSidePort->sendTimingSnoopReq(&snoop_pkt); |
| // Writeback/CleanEvict snoops do not generate a snoop response. |
| assert(!(snoop_pkt.cacheResponding())); |
| return snoop_pkt.isBlockCached(); |
| } else { |
| cpuSidePort->sendAtomicSnoop(pkt); |
| return pkt->isBlockCached(); |
| } |
| } |
| |
| Tick |
| Cache::nextQueueReadyTime() const |
| { |
| Tick nextReady = std::min(mshrQueue.nextReadyTime(), |
| writeBuffer.nextReadyTime()); |
| |
| // Don't signal prefetch ready time if no MSHRs available |
| // Will signal once enoguh MSHRs are deallocated |
| if (prefetcher && mshrQueue.canPrefetch()) { |
| nextReady = std::min(nextReady, |
| prefetcher->nextPrefetchReadyTime()); |
| } |
| |
| return nextReady; |
| } |
| |
| bool |
| Cache::sendMSHRQueuePacket(MSHR* mshr) |
| { |
| assert(mshr); |
| |
| // use request from 1st target |
| PacketPtr tgt_pkt = mshr->getTarget()->pkt; |
| |
| DPRINTF(Cache, "%s: MSHR %s\n", __func__, tgt_pkt->print()); |
| |
| CacheBlk *blk = tags->findBlock(mshr->blkAddr, mshr->isSecure); |
| |
| if (tgt_pkt->cmd == MemCmd::HardPFReq && forwardSnoops) { |
| // we should never have hardware prefetches to allocated |
| // blocks |
| assert(blk == nullptr); |
| |
| // We need to check the caches above us to verify that |
| // they don't have a copy of this block in the dirty state |
| // at the moment. Without this check we could get a stale |
| // copy from memory that might get used in place of the |
| // dirty one. |
| Packet snoop_pkt(tgt_pkt, true, false); |
| snoop_pkt.setExpressSnoop(); |
| // We are sending this packet upwards, but if it hits we will |
| // get a snoop response that we end up treating just like a |
| // normal response, hence it needs the MSHR as its sender |
| // state |
| snoop_pkt.senderState = mshr; |
| cpuSidePort->sendTimingSnoopReq(&snoop_pkt); |
| |
| // Check to see if the prefetch was squashed by an upper cache (to |
| // prevent us from grabbing the line) or if a Check to see if a |
| // writeback arrived between the time the prefetch was placed in |
| // the MSHRs and when it was selected to be sent or if the |
| // prefetch was squashed by an upper cache. |
| |
| // It is important to check cacheResponding before |
| // prefetchSquashed. If another cache has committed to |
| // responding, it will be sending a dirty response which will |
| // arrive at the MSHR allocated for this request. Checking the |
| // prefetchSquash first may result in the MSHR being |
| // prematurely deallocated. |
| if (snoop_pkt.cacheResponding()) { |
| auto M5_VAR_USED r = outstandingSnoop.insert(snoop_pkt.req); |
| assert(r.second); |
| |
| // if we are getting a snoop response with no sharers it |
| // will be allocated as Modified |
| bool pending_modified_resp = !snoop_pkt.hasSharers(); |
| markInService(mshr, pending_modified_resp); |
| |
| DPRINTF(Cache, "Upward snoop of prefetch for addr" |
| " %#x (%s) hit\n", |
| tgt_pkt->getAddr(), tgt_pkt->isSecure()? "s": "ns"); |
| return false; |
| } |
| |
| if (snoop_pkt.isBlockCached()) { |
| DPRINTF(Cache, "Block present, prefetch squashed by cache. " |
| "Deallocating mshr target %#x.\n", |
| mshr->blkAddr); |
| |
| // Deallocate the mshr target |
| if (mshrQueue.forceDeallocateTarget(mshr)) { |
| // Clear block if this deallocation resulted freed an |
| // mshr when all had previously been utilized |
| clearBlocked(Blocked_NoMSHRs); |
| } |
| |
| // given that no response is expected, delete Request and Packet |
| delete tgt_pkt->req; |
| delete tgt_pkt; |
| |
| return false; |
| } |
| } |
| |
| // either a prefetch that is not present upstream, or a normal |
| // MSHR request, proceed to get the packet to send downstream |
| PacketPtr pkt = createMissPacket(tgt_pkt, blk, mshr->needsWritable()); |
| |
| mshr->isForward = (pkt == nullptr); |
| |
| if (mshr->isForward) { |
| // not a cache block request, but a response is expected |
| // make copy of current packet to forward, keep current |
| // copy for response handling |
| pkt = new Packet(tgt_pkt, false, true); |
| assert(!pkt->isWrite()); |
| } |
| |
| // play it safe and append (rather than set) the sender state, |
| // as forwarded packets may already have existing state |
| pkt->pushSenderState(mshr); |
| |
| if (pkt->isClean() && blk && blk->isDirty()) { |
| // A cache clean opearation is looking for a dirty block. Mark |
| // the packet so that the destination xbar can determine that |
| // there will be a follow-up write packet as well. |
| pkt->setSatisfied(); |
| } |
| |
| if (!memSidePort->sendTimingReq(pkt)) { |
| // we are awaiting a retry, but we |
| // delete the packet and will be creating a new packet |
| // when we get the opportunity |
| delete pkt; |
| |
| // note that we have now masked any requestBus and |
| // schedSendEvent (we will wait for a retry before |
| // doing anything), and this is so even if we do not |
| // care about this packet and might override it before |
| // it gets retried |
| return true; |
| } else { |
| // As part of the call to sendTimingReq the packet is |
| // forwarded to all neighbouring caches (and any caches |
| // above them) as a snoop. Thus at this point we know if |
| // any of the neighbouring caches are responding, and if |
| // so, we know it is dirty, and we can determine if it is |
| // being passed as Modified, making our MSHR the ordering |
| // point |
| bool pending_modified_resp = !pkt->hasSharers() && |
| pkt->cacheResponding(); |
| markInService(mshr, pending_modified_resp); |
| if (pkt->isClean() && blk && blk->isDirty()) { |
| // A cache clean opearation is looking for a dirty |
| // block. If a dirty block is encountered a WriteClean |
| // will update any copies to the path to the memory |
| // until the point of reference. |
| DPRINTF(CacheVerbose, "%s: packet %s found block: %s\n", |
| __func__, pkt->print(), blk->print()); |
| PacketPtr wb_pkt = writecleanBlk(blk, pkt->req->getDest(), |
| pkt->id); |
| PacketList writebacks; |
| writebacks.push_back(wb_pkt); |
| doWritebacks(writebacks, 0); |
| } |
| |
| return false; |
| } |
| } |
| |
| bool |
| Cache::sendWriteQueuePacket(WriteQueueEntry* wq_entry) |
| { |
| assert(wq_entry); |
| |
| // always a single target for write queue entries |
| PacketPtr tgt_pkt = wq_entry->getTarget()->pkt; |
| |
| DPRINTF(Cache, "%s: write %s\n", __func__, tgt_pkt->print()); |
| |
| // forward as is, both for evictions and uncacheable writes |
| if (!memSidePort->sendTimingReq(tgt_pkt)) { |
| // note that we have now masked any requestBus and |
| // schedSendEvent (we will wait for a retry before |
| // doing anything), and this is so even if we do not |
| // care about this packet and might override it before |
| // it gets retried |
| return true; |
| } else { |
| markInService(wq_entry); |
| return false; |
| } |
| } |
| |
| void |
| Cache::serialize(CheckpointOut &cp) const |
| { |
| bool dirty(isDirty()); |
| |
| if (dirty) { |
| warn("*** The cache still contains dirty data. ***\n"); |
| warn(" Make sure to drain the system using the correct flags.\n"); |
| warn(" This checkpoint will not restore correctly and dirty data " |
| " in the cache will be lost!\n"); |
| } |
| |
| // Since we don't checkpoint the data in the cache, any dirty data |
| // will be lost when restoring from a checkpoint of a system that |
| // wasn't drained properly. Flag the checkpoint as invalid if the |
| // cache contains dirty data. |
| bool bad_checkpoint(dirty); |
| SERIALIZE_SCALAR(bad_checkpoint); |
| } |
| |
| void |
| Cache::unserialize(CheckpointIn &cp) |
| { |
| bool bad_checkpoint; |
| UNSERIALIZE_SCALAR(bad_checkpoint); |
| if (bad_checkpoint) { |
| fatal("Restoring from checkpoints with dirty caches is not supported " |
| "in the classic memory system. Please remove any caches or " |
| " drain them properly before taking checkpoints.\n"); |
| } |
| } |
| |
| /////////////// |
| // |
| // CpuSidePort |
| // |
| /////////////// |
| |
| AddrRangeList |
| Cache::CpuSidePort::getAddrRanges() const |
| { |
| return cache->getAddrRanges(); |
| } |
| |
| bool |
| Cache::CpuSidePort::tryTiming(PacketPtr pkt) |
| { |
| assert(!cache->system->bypassCaches()); |
| |
| // always let express snoop packets through if even if blocked |
| if (pkt->isExpressSnoop()) { |
| return true; |
| } else if (isBlocked() || mustSendRetry) { |
| // either already committed to send a retry, or blocked |
| mustSendRetry = true; |
| return false; |
| } |
| mustSendRetry = false; |
| return true; |
| } |
| |
| bool |
| Cache::CpuSidePort::recvTimingReq(PacketPtr pkt) |
| { |
| assert(!cache->system->bypassCaches()); |
| |
| // always let express snoop packets through if even if blocked |
| if (pkt->isExpressSnoop()) { |
| bool M5_VAR_USED bypass_success = cache->recvTimingReq(pkt); |
| assert(bypass_success); |
| return true; |
| } |
| |
| return tryTiming(pkt) && cache->recvTimingReq(pkt); |
| } |
| |
| Tick |
| Cache::CpuSidePort::recvAtomic(PacketPtr pkt) |
| { |
| return cache->recvAtomic(pkt); |
| } |
| |
| void |
| Cache::CpuSidePort::recvFunctional(PacketPtr pkt) |
| { |
| // functional request |
| cache->functionalAccess(pkt, true); |
| } |
| |
| Cache:: |
| CpuSidePort::CpuSidePort(const std::string &_name, Cache *_cache, |
| const std::string &_label) |
| : BaseCache::CacheSlavePort(_name, _cache, _label), cache(_cache) |
| { |
| } |
| |
| Cache* |
| CacheParams::create() |
| { |
| assert(tags); |
| |
| return new Cache(this); |
| } |
| /////////////// |
| // |
| // MemSidePort |
| // |
| /////////////// |
| |
| bool |
| Cache::MemSidePort::recvTimingResp(PacketPtr pkt) |
| { |
| cache->recvTimingResp(pkt); |
| return true; |
| } |
| |
| // Express snooping requests to memside port |
| void |
| Cache::MemSidePort::recvTimingSnoopReq(PacketPtr pkt) |
| { |
| // handle snooping requests |
| cache->recvTimingSnoopReq(pkt); |
| } |
| |
| Tick |
| Cache::MemSidePort::recvAtomicSnoop(PacketPtr pkt) |
| { |
| return cache->recvAtomicSnoop(pkt); |
| } |
| |
| void |
| Cache::MemSidePort::recvFunctionalSnoop(PacketPtr pkt) |
| { |
| // functional snoop (note that in contrast to atomic we don't have |
| // a specific functionalSnoop method, as they have the same |
| // behaviour regardless) |
| cache->functionalAccess(pkt, false); |
| } |
| |
| void |
| Cache::CacheReqPacketQueue::sendDeferredPacket() |
| { |
| // sanity check |
| assert(!waitingOnRetry); |
| |
| // there should never be any deferred request packets in the |
| // queue, instead we resly on the cache to provide the packets |
| // from the MSHR queue or write queue |
| assert(deferredPacketReadyTime() == MaxTick); |
| |
| // check for request packets (requests & writebacks) |
| QueueEntry* entry = cache.getNextQueueEntry(); |
| |
| if (!entry) { |
| // can happen if e.g. we attempt a writeback and fail, but |
| // before the retry, the writeback is eliminated because |
| // we snoop another cache's ReadEx. |
| } else { |
| // let our snoop responses go first if there are responses to |
| // the same addresses |
| if (checkConflictingSnoop(entry->blkAddr)) { |
| return; |
| } |
| waitingOnRetry = entry->sendPacket(cache); |
| } |
| |
| // if we succeeded and are not waiting for a retry, schedule the |
| // next send considering when the next queue is ready, note that |
| // snoop responses have their own packet queue and thus schedule |
| // their own events |
| if (!waitingOnRetry) { |
| schedSendEvent(cache.nextQueueReadyTime()); |
| } |
| } |
| |
| Cache:: |
| MemSidePort::MemSidePort(const std::string &_name, Cache *_cache, |
| const std::string &_label) |
| : BaseCache::CacheMasterPort(_name, _cache, _reqQueue, _snoopRespQueue), |
| _reqQueue(*_cache, *this, _snoopRespQueue, _label), |
| _snoopRespQueue(*_cache, *this, _label), cache(_cache) |
| { |
| } |