| /* |
| * Copyright (c) 2013 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2004-2005 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Ali Saidi |
| * Andrew Schultz |
| * Miguel Serrano |
| */ |
| |
| /* @file |
| * A single PCI device configuration space entry. |
| */ |
| |
| #include <list> |
| #include <string> |
| #include <vector> |
| |
| #include "base/inifile.hh" |
| #include "base/intmath.hh" |
| #include "base/misc.hh" |
| #include "base/str.hh" |
| #include "base/trace.hh" |
| #include "debug/PCIDEV.hh" |
| #include "dev/alpha/tsunamireg.h" |
| #include "dev/pciconfigall.hh" |
| #include "dev/pcidev.hh" |
| #include "mem/packet.hh" |
| #include "mem/packet_access.hh" |
| #include "sim/byteswap.hh" |
| #include "sim/core.hh" |
| |
| |
| PciDevice::PciConfigPort::PciConfigPort(PciDevice *dev, int busid, int devid, |
| int funcid, Platform *p) |
| : SimpleTimingPort(dev->name() + "-pciconf", dev), device(dev), |
| platform(p), busId(busid), deviceId(devid), functionId(funcid) |
| { |
| configAddr = platform->calcPciConfigAddr(busId, deviceId, functionId); |
| } |
| |
| |
| Tick |
| PciDevice::PciConfigPort::recvAtomic(PacketPtr pkt) |
| { |
| assert(pkt->getAddr() >= configAddr && |
| pkt->getAddr() < configAddr + PCI_CONFIG_SIZE); |
| // @todo someone should pay for this |
| pkt->busFirstWordDelay = pkt->busLastWordDelay = 0; |
| return pkt->isRead() ? device->readConfig(pkt) : device->writeConfig(pkt); |
| } |
| |
| AddrRangeList |
| PciDevice::PciConfigPort::getAddrRanges() const |
| { |
| AddrRangeList ranges; |
| if (configAddr != ULL(-1)) |
| ranges.push_back(RangeSize(configAddr, PCI_CONFIG_SIZE+1)); |
| return ranges; |
| } |
| |
| |
| PciDevice::PciDevice(const Params *p) |
| : DmaDevice(p), |
| PMCAP_BASE(p->PMCAPBaseOffset), |
| MSICAP_BASE(p->MSICAPBaseOffset), |
| MSIXCAP_BASE(p->MSIXCAPBaseOffset), |
| PXCAP_BASE(p->PXCAPBaseOffset), |
| platform(p->platform), |
| pioDelay(p->pio_latency), |
| configDelay(p->config_latency), |
| configPort(this, params()->pci_bus, params()->pci_dev, |
| params()->pci_func, params()->platform) |
| { |
| config.vendor = htole(p->VendorID); |
| config.device = htole(p->DeviceID); |
| config.command = htole(p->Command); |
| config.status = htole(p->Status); |
| config.revision = htole(p->Revision); |
| config.progIF = htole(p->ProgIF); |
| config.subClassCode = htole(p->SubClassCode); |
| config.classCode = htole(p->ClassCode); |
| config.cacheLineSize = htole(p->CacheLineSize); |
| config.latencyTimer = htole(p->LatencyTimer); |
| config.headerType = htole(p->HeaderType); |
| config.bist = htole(p->BIST); |
| |
| config.baseAddr[0] = htole(p->BAR0); |
| config.baseAddr[1] = htole(p->BAR1); |
| config.baseAddr[2] = htole(p->BAR2); |
| config.baseAddr[3] = htole(p->BAR3); |
| config.baseAddr[4] = htole(p->BAR4); |
| config.baseAddr[5] = htole(p->BAR5); |
| config.cardbusCIS = htole(p->CardbusCIS); |
| config.subsystemVendorID = htole(p->SubsystemVendorID); |
| config.subsystemID = htole(p->SubsystemID); |
| config.expansionROM = htole(p->ExpansionROM); |
| config.capabilityPtr = htole(p->CapabilityPtr); |
| // Zero out the 7 bytes of reserved space in the PCI Config space register. |
| bzero(config.reserved, 7*sizeof(uint8_t)); |
| config.interruptLine = htole(p->InterruptLine); |
| config.interruptPin = htole(p->InterruptPin); |
| config.minimumGrant = htole(p->MinimumGrant); |
| config.maximumLatency = htole(p->MaximumLatency); |
| |
| // Initialize the capability lists |
| // These structs are bitunions, meaning the data is stored in host |
| // endianess and must be converted to Little Endian when accessed |
| // by the guest |
| // PMCAP |
| pmcap.pid.cid = p->PMCAPCapId; |
| pmcap.pid.next = p->PMCAPNextCapability; |
| pmcap.pc = p->PMCAPCapabilities; |
| pmcap.pmcs = p->PMCAPCtrlStatus; |
| |
| // MSICAP |
| msicap.mid.cid = p->MSICAPCapId; |
| msicap.mid.next = p->MSICAPNextCapability; |
| msicap.mc = p->MSICAPMsgCtrl; |
| msicap.ma = p->MSICAPMsgAddr; |
| msicap.mua = p->MSICAPMsgUpperAddr; |
| msicap.md = p->MSICAPMsgData; |
| msicap.mmask = p->MSICAPMaskBits; |
| msicap.mpend = p->MSICAPPendingBits; |
| |
| // MSIXCAP |
| msixcap.mxid.cid = p->MSIXCAPCapId; |
| msixcap.mxid.next = p->MSIXCAPNextCapability; |
| msixcap.mxc = p->MSIXMsgCtrl; |
| msixcap.mtab = p->MSIXTableOffset; |
| msixcap.mpba = p->MSIXPbaOffset; |
| |
| // allocate MSIX structures if MSIXCAP_BASE |
| // indicates the MSIXCAP is being used by having a |
| // non-zero base address. |
| // The MSIX tables are stored by the guest in |
| // little endian byte-order as according the |
| // PCIe specification. Make sure to take the proper |
| // actions when manipulating these tables on the host |
| if (MSIXCAP_BASE != 0x0) { |
| int msix_vecs = msixcap.mxc.ts + 1; |
| MSIXTable tmp1 = {{0UL,0UL,0UL,0UL}}; |
| msix_table.resize(msix_vecs, tmp1); |
| |
| MSIXPbaEntry tmp2 = {0}; |
| int pba_size = msix_vecs / MSIXVECS_PER_PBA; |
| if ((msix_vecs % MSIXVECS_PER_PBA) > 0) { |
| pba_size++; |
| } |
| msix_pba.resize(pba_size, tmp2); |
| } |
| |
| // PXCAP |
| pxcap.pxid.cid = p->PXCAPCapId; |
| pxcap.pxid.next = p->PXCAPNextCapability; |
| pxcap.pxcap = p->PXCAPCapabilities; |
| pxcap.pxdcap = p->PXCAPDevCapabilities; |
| pxcap.pxdc = p->PXCAPDevCtrl; |
| pxcap.pxds = p->PXCAPDevStatus; |
| pxcap.pxlcap = p->PXCAPLinkCap; |
| pxcap.pxlc = p->PXCAPLinkCtrl; |
| pxcap.pxls = p->PXCAPLinkStatus; |
| pxcap.pxdcap2 = p->PXCAPDevCap2; |
| pxcap.pxdc2 = p->PXCAPDevCtrl2; |
| |
| BARSize[0] = p->BAR0Size; |
| BARSize[1] = p->BAR1Size; |
| BARSize[2] = p->BAR2Size; |
| BARSize[3] = p->BAR3Size; |
| BARSize[4] = p->BAR4Size; |
| BARSize[5] = p->BAR5Size; |
| |
| legacyIO[0] = p->BAR0LegacyIO; |
| legacyIO[1] = p->BAR1LegacyIO; |
| legacyIO[2] = p->BAR2LegacyIO; |
| legacyIO[3] = p->BAR3LegacyIO; |
| legacyIO[4] = p->BAR4LegacyIO; |
| legacyIO[5] = p->BAR5LegacyIO; |
| |
| for (int i = 0; i < 6; ++i) { |
| if (legacyIO[i]) { |
| BARAddrs[i] = platform->calcPciIOAddr(letoh(config.baseAddr[i])); |
| config.baseAddr[i] = 0; |
| } else { |
| BARAddrs[i] = 0; |
| uint32_t barsize = BARSize[i]; |
| if (barsize != 0 && !isPowerOf2(barsize)) { |
| fatal("BAR %d size %d is not a power of 2\n", i, BARSize[i]); |
| } |
| } |
| } |
| |
| platform->registerPciDevice(p->pci_bus, p->pci_dev, p->pci_func, |
| letoh(config.interruptLine)); |
| } |
| |
| void |
| PciDevice::init() |
| { |
| if (!configPort.isConnected()) |
| panic("PCI config port on %s not connected to anything!\n", name()); |
| configPort.sendRangeChange(); |
| DmaDevice::init(); |
| } |
| |
| unsigned int |
| PciDevice::drain(DrainManager *dm) |
| { |
| unsigned int count; |
| count = pioPort.drain(dm) + dmaPort.drain(dm) + configPort.drain(dm); |
| if (count) |
| setDrainState(Drainable::Draining); |
| else |
| setDrainState(Drainable::Drained); |
| return count; |
| } |
| |
| Tick |
| PciDevice::readConfig(PacketPtr pkt) |
| { |
| int offset = pkt->getAddr() & PCI_CONFIG_SIZE; |
| if (offset >= PCI_DEVICE_SPECIFIC) |
| panic("Device specific PCI config space not implemented!\n"); |
| |
| pkt->allocate(); |
| |
| switch (pkt->getSize()) { |
| case sizeof(uint8_t): |
| pkt->set<uint8_t>(config.data[offset]); |
| DPRINTF(PCIDEV, |
| "readConfig: dev %#x func %#x reg %#x 1 bytes: data = %#x\n", |
| params()->pci_dev, params()->pci_func, offset, |
| (uint32_t)pkt->get<uint8_t>()); |
| break; |
| case sizeof(uint16_t): |
| pkt->set<uint16_t>(*(uint16_t*)&config.data[offset]); |
| DPRINTF(PCIDEV, |
| "readConfig: dev %#x func %#x reg %#x 2 bytes: data = %#x\n", |
| params()->pci_dev, params()->pci_func, offset, |
| (uint32_t)pkt->get<uint16_t>()); |
| break; |
| case sizeof(uint32_t): |
| pkt->set<uint32_t>(*(uint32_t*)&config.data[offset]); |
| DPRINTF(PCIDEV, |
| "readConfig: dev %#x func %#x reg %#x 4 bytes: data = %#x\n", |
| params()->pci_dev, params()->pci_func, offset, |
| (uint32_t)pkt->get<uint32_t>()); |
| break; |
| default: |
| panic("invalid access size(?) for PCI configspace!\n"); |
| } |
| pkt->makeAtomicResponse(); |
| return configDelay; |
| |
| } |
| |
| AddrRangeList |
| PciDevice::getAddrRanges() const |
| { |
| AddrRangeList ranges; |
| int x = 0; |
| for (x = 0; x < 6; x++) |
| if (BARAddrs[x] != 0) |
| ranges.push_back(RangeSize(BARAddrs[x],BARSize[x])); |
| return ranges; |
| } |
| |
| Tick |
| PciDevice::writeConfig(PacketPtr pkt) |
| { |
| int offset = pkt->getAddr() & PCI_CONFIG_SIZE; |
| if (offset >= PCI_DEVICE_SPECIFIC) |
| panic("Device specific PCI config space not implemented!\n"); |
| |
| switch (pkt->getSize()) { |
| case sizeof(uint8_t): |
| switch (offset) { |
| case PCI0_INTERRUPT_LINE: |
| config.interruptLine = pkt->get<uint8_t>(); |
| break; |
| case PCI_CACHE_LINE_SIZE: |
| config.cacheLineSize = pkt->get<uint8_t>(); |
| break; |
| case PCI_LATENCY_TIMER: |
| config.latencyTimer = pkt->get<uint8_t>(); |
| break; |
| /* Do nothing for these read-only registers */ |
| case PCI0_INTERRUPT_PIN: |
| case PCI0_MINIMUM_GRANT: |
| case PCI0_MAXIMUM_LATENCY: |
| case PCI_CLASS_CODE: |
| case PCI_REVISION_ID: |
| break; |
| default: |
| panic("writing to a read only register"); |
| } |
| DPRINTF(PCIDEV, |
| "writeConfig: dev %#x func %#x reg %#x 1 bytes: data = %#x\n", |
| params()->pci_dev, params()->pci_func, offset, |
| (uint32_t)pkt->get<uint8_t>()); |
| break; |
| case sizeof(uint16_t): |
| switch (offset) { |
| case PCI_COMMAND: |
| config.command = pkt->get<uint8_t>(); |
| break; |
| case PCI_STATUS: |
| config.status = pkt->get<uint8_t>(); |
| break; |
| case PCI_CACHE_LINE_SIZE: |
| config.cacheLineSize = pkt->get<uint8_t>(); |
| break; |
| default: |
| panic("writing to a read only register"); |
| } |
| DPRINTF(PCIDEV, |
| "writeConfig: dev %#x func %#x reg %#x 2 bytes: data = %#x\n", |
| params()->pci_dev, params()->pci_func, offset, |
| (uint32_t)pkt->get<uint16_t>()); |
| break; |
| case sizeof(uint32_t): |
| switch (offset) { |
| case PCI0_BASE_ADDR0: |
| case PCI0_BASE_ADDR1: |
| case PCI0_BASE_ADDR2: |
| case PCI0_BASE_ADDR3: |
| case PCI0_BASE_ADDR4: |
| case PCI0_BASE_ADDR5: |
| { |
| int barnum = BAR_NUMBER(offset); |
| |
| if (!legacyIO[barnum]) { |
| // convert BAR values to host endianness |
| uint32_t he_old_bar = letoh(config.baseAddr[barnum]); |
| uint32_t he_new_bar = letoh(pkt->get<uint32_t>()); |
| |
| uint32_t bar_mask = |
| BAR_IO_SPACE(he_old_bar) ? BAR_IO_MASK : BAR_MEM_MASK; |
| |
| // Writing 0xffffffff to a BAR tells the card to set the |
| // value of the bar to a bitmask indicating the size of |
| // memory it needs |
| if (he_new_bar == 0xffffffff) { |
| he_new_bar = ~(BARSize[barnum] - 1); |
| } else { |
| // does it mean something special to write 0 to a BAR? |
| he_new_bar &= ~bar_mask; |
| if (he_new_bar) { |
| BARAddrs[barnum] = BAR_IO_SPACE(he_old_bar) ? |
| platform->calcPciIOAddr(he_new_bar) : |
| platform->calcPciMemAddr(he_new_bar); |
| pioPort.sendRangeChange(); |
| } |
| } |
| config.baseAddr[barnum] = htole((he_new_bar & ~bar_mask) | |
| (he_old_bar & bar_mask)); |
| } |
| } |
| break; |
| |
| case PCI0_ROM_BASE_ADDR: |
| if (letoh(pkt->get<uint32_t>()) == 0xfffffffe) |
| config.expansionROM = htole((uint32_t)0xffffffff); |
| else |
| config.expansionROM = pkt->get<uint32_t>(); |
| break; |
| |
| case PCI_COMMAND: |
| // This could also clear some of the error bits in the Status |
| // register. However they should never get set, so lets ignore |
| // it for now |
| config.command = pkt->get<uint32_t>(); |
| break; |
| |
| default: |
| DPRINTF(PCIDEV, "Writing to a read only register"); |
| } |
| DPRINTF(PCIDEV, |
| "writeConfig: dev %#x func %#x reg %#x 4 bytes: data = %#x\n", |
| params()->pci_dev, params()->pci_func, offset, |
| (uint32_t)pkt->get<uint32_t>()); |
| break; |
| default: |
| panic("invalid access size(?) for PCI configspace!\n"); |
| } |
| pkt->makeAtomicResponse(); |
| return configDelay; |
| } |
| |
| void |
| PciDevice::serialize(std::ostream &os) |
| { |
| SERIALIZE_ARRAY(BARSize, sizeof(BARSize) / sizeof(BARSize[0])); |
| SERIALIZE_ARRAY(BARAddrs, sizeof(BARAddrs) / sizeof(BARAddrs[0])); |
| SERIALIZE_ARRAY(config.data, sizeof(config.data) / sizeof(config.data[0])); |
| |
| // serialize the capability list registers |
| paramOut(os, csprintf("pmcap.pid"), uint16_t(pmcap.pid)); |
| paramOut(os, csprintf("pmcap.pc"), uint16_t(pmcap.pc)); |
| paramOut(os, csprintf("pmcap.pmcs"), uint16_t(pmcap.pmcs)); |
| |
| paramOut(os, csprintf("msicap.mid"), uint16_t(msicap.mid)); |
| paramOut(os, csprintf("msicap.mc"), uint16_t(msicap.mc)); |
| paramOut(os, csprintf("msicap.ma"), uint32_t(msicap.ma)); |
| SERIALIZE_SCALAR(msicap.mua); |
| paramOut(os, csprintf("msicap.md"), uint16_t(msicap.md)); |
| SERIALIZE_SCALAR(msicap.mmask); |
| SERIALIZE_SCALAR(msicap.mpend); |
| |
| paramOut(os, csprintf("msixcap.mxid"), uint16_t(msixcap.mxid)); |
| paramOut(os, csprintf("msixcap.mxc"), uint16_t(msixcap.mxc)); |
| paramOut(os, csprintf("msixcap.mtab"), uint32_t(msixcap.mtab)); |
| paramOut(os, csprintf("msixcap.mpba"), uint32_t(msixcap.mpba)); |
| |
| // Only serialize if we have a non-zero base address |
| if (MSIXCAP_BASE != 0x0) { |
| int msix_array_size = msixcap.mxc.ts + 1; |
| int pba_array_size = msix_array_size/MSIXVECS_PER_PBA; |
| if ((msix_array_size % MSIXVECS_PER_PBA) > 0) { |
| pba_array_size++; |
| } |
| |
| SERIALIZE_SCALAR(msix_array_size); |
| SERIALIZE_SCALAR(pba_array_size); |
| |
| for (int i = 0; i < msix_array_size; i++) { |
| paramOut(os, csprintf("msix_table[%d].addr_lo", i), |
| msix_table[i].fields.addr_lo); |
| paramOut(os, csprintf("msix_table[%d].addr_hi", i), |
| msix_table[i].fields.addr_hi); |
| paramOut(os, csprintf("msix_table[%d].msg_data", i), |
| msix_table[i].fields.msg_data); |
| paramOut(os, csprintf("msix_table[%d].vec_ctrl", i), |
| msix_table[i].fields.vec_ctrl); |
| } |
| for (int i = 0; i < pba_array_size; i++) { |
| paramOut(os, csprintf("msix_pba[%d].bits", i), |
| msix_pba[i].bits); |
| } |
| } |
| |
| paramOut(os, csprintf("pxcap.pxid"), uint16_t(pxcap.pxid)); |
| paramOut(os, csprintf("pxcap.pxcap"), uint16_t(pxcap.pxcap)); |
| paramOut(os, csprintf("pxcap.pxdcap"), uint32_t(pxcap.pxdcap)); |
| paramOut(os, csprintf("pxcap.pxdc"), uint16_t(pxcap.pxdc)); |
| paramOut(os, csprintf("pxcap.pxds"), uint16_t(pxcap.pxds)); |
| paramOut(os, csprintf("pxcap.pxlcap"), uint32_t(pxcap.pxlcap)); |
| paramOut(os, csprintf("pxcap.pxlc"), uint16_t(pxcap.pxlc)); |
| paramOut(os, csprintf("pxcap.pxls"), uint16_t(pxcap.pxls)); |
| paramOut(os, csprintf("pxcap.pxdcap2"), uint32_t(pxcap.pxdcap2)); |
| paramOut(os, csprintf("pxcap.pxdc2"), uint32_t(pxcap.pxdc2)); |
| } |
| |
| void |
| PciDevice::unserialize(Checkpoint *cp, const std::string §ion) |
| { |
| UNSERIALIZE_ARRAY(BARSize, sizeof(BARSize) / sizeof(BARSize[0])); |
| UNSERIALIZE_ARRAY(BARAddrs, sizeof(BARAddrs) / sizeof(BARAddrs[0])); |
| UNSERIALIZE_ARRAY(config.data, |
| sizeof(config.data) / sizeof(config.data[0])); |
| |
| // unserialize the capability list registers |
| uint16_t tmp16; |
| uint32_t tmp32; |
| paramIn(cp, section, csprintf("pmcap.pid"), tmp16); |
| pmcap.pid = tmp16; |
| paramIn(cp, section, csprintf("pmcap.pc"), tmp16); |
| pmcap.pc = tmp16; |
| paramIn(cp, section, csprintf("pmcap.pmcs"), tmp16); |
| pmcap.pmcs = tmp16; |
| |
| paramIn(cp, section, csprintf("msicap.mid"), tmp16); |
| msicap.mid = tmp16; |
| paramIn(cp, section, csprintf("msicap.mc"), tmp16); |
| msicap.mc = tmp16; |
| paramIn(cp, section, csprintf("msicap.ma"), tmp32); |
| msicap.ma = tmp32; |
| UNSERIALIZE_SCALAR(msicap.mua); |
| paramIn(cp, section, csprintf("msicap.md"), tmp16);; |
| msicap.md = tmp16; |
| UNSERIALIZE_SCALAR(msicap.mmask); |
| UNSERIALIZE_SCALAR(msicap.mpend); |
| |
| paramIn(cp, section, csprintf("msixcap.mxid"), tmp16); |
| msixcap.mxid = tmp16; |
| paramIn(cp, section, csprintf("msixcap.mxc"), tmp16); |
| msixcap.mxc = tmp16; |
| paramIn(cp, section, csprintf("msixcap.mtab"), tmp32); |
| msixcap.mtab = tmp32; |
| paramIn(cp, section, csprintf("msixcap.mpba"), tmp32); |
| msixcap.mpba = tmp32; |
| |
| // Only allocate if MSIXCAP_BASE is not 0x0 |
| if (MSIXCAP_BASE != 0x0) { |
| int msix_array_size; |
| int pba_array_size; |
| |
| UNSERIALIZE_SCALAR(msix_array_size); |
| UNSERIALIZE_SCALAR(pba_array_size); |
| |
| MSIXTable tmp1 = {{0UL, 0UL, 0UL, 0UL}}; |
| msix_table.resize(msix_array_size, tmp1); |
| |
| MSIXPbaEntry tmp2 = {0}; |
| msix_pba.resize(pba_array_size, tmp2); |
| |
| for (int i = 0; i < msix_array_size; i++) { |
| paramIn(cp, section, csprintf("msix_table[%d].addr_lo", i), |
| msix_table[i].fields.addr_lo); |
| paramIn(cp, section, csprintf("msix_table[%d].addr_hi", i), |
| msix_table[i].fields.addr_hi); |
| paramIn(cp, section, csprintf("msix_table[%d].msg_data", i), |
| msix_table[i].fields.msg_data); |
| paramIn(cp, section, csprintf("msix_table[%d].vec_ctrl", i), |
| msix_table[i].fields.vec_ctrl); |
| } |
| for (int i = 0; i < pba_array_size; i++) { |
| paramIn(cp, section, csprintf("msix_pba[%d].bits", i), |
| msix_pba[i].bits); |
| } |
| } |
| |
| paramIn(cp, section, csprintf("pxcap.pxid"), tmp16); |
| pxcap.pxid = tmp16; |
| paramIn(cp, section, csprintf("pxcap.pxcap"), tmp16); |
| pxcap.pxcap = tmp16; |
| paramIn(cp, section, csprintf("pxcap.pxdcap"), tmp32); |
| pxcap.pxdcap = tmp32; |
| paramIn(cp, section, csprintf("pxcap.pxdc"), tmp16); |
| pxcap.pxdc = tmp16; |
| paramIn(cp, section, csprintf("pxcap.pxds"), tmp16); |
| pxcap.pxds = tmp16; |
| paramIn(cp, section, csprintf("pxcap.pxlcap"), tmp32); |
| pxcap.pxlcap = tmp32; |
| paramIn(cp, section, csprintf("pxcap.pxlc"), tmp16); |
| pxcap.pxlc = tmp16; |
| paramIn(cp, section, csprintf("pxcap.pxls"), tmp16); |
| pxcap.pxls = tmp16; |
| paramIn(cp, section, csprintf("pxcap.pxdcap2"), tmp32); |
| pxcap.pxdcap2 = tmp32; |
| paramIn(cp, section, csprintf("pxcap.pxdc2"), tmp32); |
| pxcap.pxdc2 = tmp32; |
| pioPort.sendRangeChange(); |
| } |
| |
