| /* | |
| * Copyright (c) 2009 Princeton University | |
| * Copyright (c) 2009 The Regents of the University of California | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Authors: Hangsheng Wang (Orion 1.0, Princeton) | |
| * Xinping Zhu (Orion 1.0, Princeton) | |
| * Xuning Chen (Orion 1.0, Princeton) | |
| * Bin Li (Orion 2.0, Princeton) | |
| * Kambiz Samadi (Orion 2.0, UC San Diego) | |
| */ | |
| #include "base/misc.hh" | |
| #include "mem/ruby/network/orion/Buffer/BitlineUnit.hh" | |
| #include "mem/ruby/network/orion/Buffer/SRAM.hh" | |
| #include "mem/ruby/network/orion/TechParameter.hh" | |
| BitlineUnit::BitlineUnit( | |
| const string bl_model_str_, | |
| const SRAM* sram_ptr_, | |
| const TechParameter* tech_param_ptr_ | |
| ) | |
| { | |
| if (bl_model_str_ == "RW_BITLINE") | |
| { | |
| m_bl_model = RW_BITLINE; | |
| } | |
| else if (bl_model_str_ == "WO_BITLINE") | |
| { | |
| m_bl_model = WO_BITLINE; | |
| } | |
| else | |
| { | |
| m_bl_model = NO_MODEL; | |
| } | |
| if (m_bl_model != NO_MODEL) | |
| { | |
| m_sram_ptr = sram_ptr_; | |
| m_tech_param_ptr = tech_param_ptr_; | |
| init(); | |
| } | |
| } | |
| BitlineUnit::~BitlineUnit() | |
| {} | |
| void BitlineUnit::init() | |
| { | |
| uint32_t num_port = m_sram_ptr->get_num_port(); | |
| uint32_t num_data_end = m_sram_ptr->get_num_data_end(); | |
| double bl_cmetal; | |
| if ((num_port > 1) || (num_data_end == 2)) | |
| { | |
| bl_cmetal = m_tech_param_ptr->get_CC3M2metal(); | |
| } | |
| else | |
| { | |
| bl_cmetal = m_tech_param_ptr->get_CM2metal(); | |
| } | |
| uint32_t num_row = m_sram_ptr->get_num_row(); | |
| double RegCellHeight = m_tech_param_ptr->get_RegCellHeight(); | |
| double WordlineSpacing = m_tech_param_ptr->get_WordlineSpacing(); | |
| m_bl_len = num_row*(RegCellHeight + num_port*WordlineSpacing); | |
| m_bl_wire_cap = m_bl_len * bl_cmetal; | |
| double e_factor = m_tech_param_ptr->get_EnergyFactor(); | |
| double sense_e_factor = m_tech_param_ptr->get_SenseEnergyFactor(); | |
| switch(m_bl_model) | |
| { | |
| case RW_BITLINE: | |
| if (num_data_end == 2) | |
| { | |
| m_e_col_sel = calc_col_select_cap() * e_factor; | |
| m_e_col_read = calc_col_read_cap() * sense_e_factor; | |
| } | |
| else | |
| { | |
| m_e_col_sel = 0; | |
| m_e_col_read = calc_col_read_cap() * e_factor; | |
| } | |
| m_e_col_write = calc_col_write_cap() * e_factor; | |
| m_i_static = calc_i_static(); | |
| break; | |
| case WO_BITLINE: | |
| m_e_col_sel = m_e_col_read = 0; | |
| m_e_col_write = calc_col_write_cap() * e_factor; | |
| //FIXME - no static power? | |
| break; | |
| default: | |
| fatal("Error in BITLINE model.\n"); | |
| } | |
| return; | |
| } | |
| double BitlineUnit::calc_col_select_cap() | |
| { | |
| double Wbitmuxn = m_tech_param_ptr->get_Wbitmuxn(); | |
| return m_tech_param_ptr->calc_gatecap(Wbitmuxn, 1); | |
| } | |
| double BitlineUnit::calc_col_read_cap() | |
| { | |
| double total_cap = 0; | |
| // part 1: drain cap of precharge tx's | |
| //total_cap = m_num_bl_pre * Util::calc_draincap(m_pre_size, Util::PCH, 1); | |
| // part 2: drain cap of pass tx's | |
| double Wmemcellr = m_tech_param_ptr->get_Wmemcellr(); | |
| uint32_t num_row = m_sram_ptr->get_num_row(); | |
| total_cap = num_row * m_tech_param_ptr->calc_draincap(Wmemcellr, TechParameter::NCH, 1); | |
| // part 3: metal cap | |
| total_cap += m_bl_wire_cap; | |
| m_pre_unit_load = total_cap; | |
| // part 4: bitline inverter | |
| uint32_t num_data_end = m_sram_ptr->get_num_data_end(); | |
| if (num_data_end == 1) | |
| { | |
| // FIXME: magic numbers | |
| double MSCALE = m_tech_param_ptr->get_MSCALE(); | |
| total_cap += m_tech_param_ptr->calc_gatecap(MSCALE * (29.9 + 7.8), 0) + m_tech_param_ptr->calc_gatecap(MSCALE * (47.0 + 12.0), 0); | |
| } | |
| // part 5: gate cap of sense amplifier or output driver | |
| bool is_outdrv = m_sram_ptr->get_is_outdrv(); | |
| if (num_data_end == 2) | |
| { // sense amplifier | |
| double WsenseQ1to4 = m_tech_param_ptr->get_WsenseQ1to4(); | |
| total_cap += 2 * m_tech_param_ptr->calc_gatecap(WsenseQ1to4, 10); | |
| } | |
| else if (is_outdrv) | |
| { | |
| double Woutdrvnandn = m_tech_param_ptr->get_Woutdrvnandn(); | |
| double Woutdrvnandp = m_tech_param_ptr->get_Woutdrvnandp(); | |
| double Woutdrvnorn = m_tech_param_ptr->get_Woutdrvnorn(); | |
| double Woutdrvnorp = m_tech_param_ptr->get_Woutdrvnorp(); | |
| total_cap += m_tech_param_ptr->calc_gatecap(Woutdrvnandn, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnandp, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnorn, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnorp, 1); | |
| } | |
| return total_cap; | |
| } | |
| double BitlineUnit::calc_col_write_cap() | |
| { | |
| double total_cap, psize, nsize; | |
| // part 1: line cap, including drain cap of pass tx's and metal cap | |
| uint32_t num_row = m_sram_ptr->get_num_row(); | |
| double Wmemcellw = m_tech_param_ptr->get_Wmemcellw(); | |
| total_cap = num_row * m_tech_param_ptr->calc_draincap(Wmemcellw, TechParameter::NCH, 1) + m_bl_wire_cap; | |
| // part 2: write driver | |
| double period = m_tech_param_ptr->get_period(); | |
| psize = m_tech_param_ptr->calc_driver_psize(total_cap, period / 8.0); | |
| double Wdecinvn = m_tech_param_ptr->get_Wdecinvn(); | |
| double Wdecinvp = m_tech_param_ptr->get_Wdecinvp(); | |
| nsize = psize * Wdecinvn / Wdecinvp; | |
| total_cap += m_tech_param_ptr->calc_draincap(psize, TechParameter::PCH, 1) + m_tech_param_ptr->calc_draincap(nsize, TechParameter::NCH, 1) + m_tech_param_ptr->calc_gatecap(psize + nsize, 1); | |
| return total_cap; | |
| } | |
| double BitlineUnit::calc_i_static() | |
| { | |
| double Wdecinvn = m_tech_param_ptr->get_Wdecinvn(); | |
| double Wdecinvp = m_tech_param_ptr->get_Wdecinvp(); | |
| double NMOS_TAB_0 = m_tech_param_ptr->get_NMOS_TAB(0); | |
| double PMOS_TAB_0 = m_tech_param_ptr->get_PMOS_TAB(0); | |
| return (2*(Wdecinvn*NMOS_TAB_0+Wdecinvp*PMOS_TAB_0)); | |
| } |