| /* | |
| * Copyright (c) 2009 Princeton University | |
| * Copyright (c) 2009 The Regents of the University of California | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Authors: Hangsheng Wang (Orion 1.0, Princeton) | |
| * Xinping Zhu (Orion 1.0, Princeton) | |
| * Xuning Chen (Orion 1.0, Princeton) | |
| * Bin Li (Orion 2.0, Princeton) | |
| * Kambiz Samadi (Orion 2.0, UC San Diego) | |
| */ | |
| #include <cmath> | |
| #include "mem/ruby/network/orion/Buffer/DecoderUnit.hh" | |
| #include "mem/ruby/network/orion/TechParameter.hh" | |
| using namespace std; | |
| DecoderUnit::DecoderUnit( | |
| const string& dec_model_str_, | |
| uint32_t dec_width_, | |
| const TechParameter* tech_param_ptr_ | |
| ) | |
| { | |
| if (dec_model_str_.compare("GENERIC_DEC") == 0) | |
| { | |
| m_dec_model = GENERIC_DEC; | |
| } | |
| else | |
| { | |
| m_dec_model = NO_MODEL; | |
| } | |
| if (m_dec_model != NO_MODEL) | |
| { | |
| m_dec_width = dec_width_; | |
| m_tech_param_ptr = tech_param_ptr_; | |
| init(); | |
| } | |
| } | |
| DecoderUnit::~DecoderUnit() | |
| { | |
| } | |
| void DecoderUnit::init() | |
| { | |
| if (m_dec_width >= 4) | |
| { // 2-level decoder | |
| m_num_in_1st = (m_dec_width == 4)? 2:3; | |
| m_num_out_0th = 1 << (m_num_in_1st - 1); | |
| m_num_in_2nd = (uint32_t)ceil((double)m_dec_width/(double)m_num_in_1st); | |
| m_num_out_1st = 1 << (m_dec_width - m_num_in_1st); | |
| } | |
| else if (m_dec_width >= 2) | |
| { // 1-level decoder | |
| m_num_in_1st = m_dec_width; | |
| m_num_out_0th = 1 << (m_num_in_1st - 1); | |
| m_num_in_2nd = m_num_out_1st = 0; | |
| } | |
| else | |
| { | |
| m_num_in_1st = m_num_out_0th = m_num_in_2nd = m_num_out_1st = 0; | |
| } | |
| // compute energy constants | |
| double e_factor = m_tech_param_ptr->get_vdd() * m_tech_param_ptr->get_vdd(); | |
| if (m_dec_width >= 4) | |
| { | |
| m_e_chg_l1 = calc_chgl1_cap() * e_factor; | |
| m_e_chg_output = calc_select_cap() * e_factor; | |
| } | |
| else if (m_dec_width >= 2) | |
| { | |
| m_e_chg_l1 = calc_chgl1_cap() * e_factor; | |
| m_e_chg_output = 0; | |
| } | |
| else | |
| { | |
| m_e_chg_l1 = m_e_chg_output = 0; | |
| } | |
| m_e_chg_addr = calc_chgaddr_cap() * e_factor; | |
| return; | |
| } | |
| double DecoderUnit::calc_chgl1_cap() | |
| { | |
| double total_cap; | |
| // part 1: drain cap of level-1 decoder | |
| double Wdec3to8p = m_tech_param_ptr->get_Wdec3to8p(); | |
| double Wdec3to8n = m_tech_param_ptr->get_Wdec3to8n(); | |
| total_cap = m_num_in_1st * m_tech_param_ptr->calc_draincap(Wdec3to8p, TechParameter::PCH, 1) + m_tech_param_ptr->calc_draincap(Wdec3to8n, TechParameter::NCH, m_num_in_1st); | |
| /* part 2: gate cap of level-2 decoder */ | |
| /* WHS: 40 and 20 should go to PARM */ | |
| double WdecNORn = m_tech_param_ptr->get_WdecNORn(); | |
| double WdecNORp = m_tech_param_ptr->get_WdecNORp(); | |
| total_cap += m_num_out_0th*m_tech_param_ptr->calc_gatecap((WdecNORn+WdecNORp), m_num_in_2nd*40 + 20); | |
| return total_cap; | |
| } | |
| double DecoderUnit::calc_select_cap() | |
| { | |
| double total_cap; | |
| // part 1: drain cap of last level decoders | |
| double WdecNORp = m_tech_param_ptr->get_WdecNORp(); | |
| double WdecNORn = m_tech_param_ptr->get_WdecNORn(); | |
| total_cap = m_num_in_2nd * m_tech_param_ptr->calc_draincap(WdecNORn, TechParameter::NCH, 1) + m_tech_param_ptr->calc_draincap(WdecNORp, TechParameter::PCH, m_num_in_2nd); | |
| // part 2: output inverter | |
| // WHS: 20 should go to PARM | |
| double Wdecinvp = m_tech_param_ptr->get_Wdecinvp(); | |
| double Wdecinvn = m_tech_param_ptr->get_Wdecinvn(); | |
| total_cap += m_tech_param_ptr->calc_draincap(Wdecinvn, TechParameter::NCH, 1) + m_tech_param_ptr->calc_draincap(Wdecinvp, TechParameter::PCH, 1) + m_tech_param_ptr->calc_gatecap(Wdecinvn + Wdecinvp, 20); | |
| return total_cap; | |
| } | |
| double DecoderUnit::calc_chgaddr_cap() | |
| { | |
| double total_cap; | |
| // stage 1: input driver | |
| double Wdecdrivep = m_tech_param_ptr->get_Wdecdrivep(); | |
| double Wdecdriven = m_tech_param_ptr->get_Wdecdriven(); | |
| total_cap = m_tech_param_ptr->calc_draincap(Wdecdrivep, TechParameter::PCH, 1) + m_tech_param_ptr->calc_draincap(Wdecdriven, TechParameter::NCH, 1) + m_tech_param_ptr->calc_gatecap(Wdecdriven, 1); | |
| /* inverter to produce complement addr, this needs 1/2 */ | |
| /* WHS: assume Wdecinv(np) for this inverter */ | |
| double Wdecinvp = m_tech_param_ptr->get_Wdecinvp(); | |
| double Wdecinvn = m_tech_param_ptr->get_Wdecinvn(); | |
| total_cap += (m_tech_param_ptr->calc_draincap(Wdecinvp, TechParameter::PCH, 1) + m_tech_param_ptr->calc_draincap(Wdecinvn, TechParameter::NCH, 1) + m_tech_param_ptr->calc_gatecap(Wdecinvp, 1) + m_tech_param_ptr->calc_gatecap(Wdecinvn, 1)) / 2; | |
| /* stage 2: gate cap of level-1 decoder */ | |
| /* WHS: 10 should go to PARM */ | |
| double Wdec3to8p = m_tech_param_ptr->get_Wdec3to8p(); | |
| double Wdec3to8n = m_tech_param_ptr->get_Wdec3to8n(); | |
| total_cap += m_num_out_0th*m_tech_param_ptr->calc_gatecap( Wdec3to8n + Wdec3to8p, 10 ); | |
| return total_cap; | |
| } | |