| /* | |
| * Copyright (c) 2009 Princeton University | |
| * Copyright (c) 2009 The Regents of the University of California | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Authors: Hangsheng Wang (Orion 1.0, Princeton) | |
| * Xinping Zhu (Orion 1.0, Princeton) | |
| * Xuning Chen (Orion 1.0, Princeton) | |
| * Bin Li (Orion 2.0, Princeton) | |
| * Kambiz Samadi (Orion 2.0, UC San Diego) | |
| */ | |
| #include "base/misc.hh" | |
| #include "mem/ruby/network/orion/Buffer/OutdrvUnit.hh" | |
| #include "mem/ruby/network/orion/Buffer/SRAM.hh" | |
| #include "mem/ruby/network/orion/TechParameter.hh" | |
| OutdrvUnit::OutdrvUnit( | |
| const string& outdrv_model_str_, | |
| const SRAM* sram_ptr_, | |
| const TechParameter* tech_param_ptr_ | |
| ) | |
| { | |
| if (outdrv_model_str_ == string("CACHE_OUTDRV")) | |
| { | |
| m_outdrv_model = CACHE_OUTDRV; | |
| } | |
| else if (outdrv_model_str_ == string("REG_OUTDRV")) | |
| { | |
| m_outdrv_model = REG_OUTDRV; | |
| } | |
| else | |
| { | |
| m_outdrv_model = NO_MODEL; | |
| } | |
| if (m_outdrv_model != NO_MODEL) | |
| { | |
| m_sram_ptr = sram_ptr_; | |
| m_tech_param_ptr = tech_param_ptr_; | |
| init(); | |
| } | |
| else | |
| { | |
| m_e_select = 0; | |
| m_e_out_1 = 0; | |
| m_e_out_0 = 0; | |
| m_e_chg_data = 0; | |
| } | |
| } | |
| OutdrvUnit::~OutdrvUnit() | |
| {} | |
| void OutdrvUnit::init() | |
| { | |
| double e_factor = m_tech_param_ptr->get_EnergyFactor(); | |
| m_e_select = calc_select_cap() * e_factor; | |
| m_e_out_1 = calc_outdata_cap(1) * e_factor; | |
| m_e_out_0 = calc_outdata_cap(0) * e_factor; | |
| switch(m_outdrv_model) | |
| { | |
| case CACHE_OUTDRV: | |
| m_e_chg_data = calc_chgdata_cap() * e_factor; | |
| break; | |
| case REG_OUTDRV: | |
| m_e_chg_data = 0; | |
| break; | |
| default: | |
| fatal("Incorrect OUTDRIVE model.\n"); | |
| } | |
| m_i_static = calc_i_static(); | |
| return; | |
| } | |
| double OutdrvUnit::calc_select_cap() | |
| { | |
| double total_cap; | |
| // stage 1: inverter | |
| double Woutdrvseln = m_tech_param_ptr->get_Woutdrvseln(); | |
| double Woutdrvselp = m_tech_param_ptr->get_Woutdrvselp(); | |
| total_cap = m_tech_param_ptr->calc_gatecap(Woutdrvseln, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvselp, 1) + m_tech_param_ptr->calc_draincap(Woutdrvseln, TechParameter::NCH, 1) + m_tech_param_ptr->calc_draincap(Woutdrvselp, TechParameter::PCH, 1); | |
| // stage 2: gate cap of nand gate and nor gate | |
| // only consider 1 gate cap because another and drain cap switch depends on data value | |
| uint32_t line_width = m_sram_ptr->get_line_width(); | |
| double Woutdrvnandn = m_tech_param_ptr->get_Woutdrvnandn(); | |
| double Woutdrvnandp = m_tech_param_ptr->get_Woutdrvnandp(); | |
| double Woutdrvnorn = m_tech_param_ptr->get_Woutdrvnorn(); | |
| double Woutdrvnorp = m_tech_param_ptr->get_Woutdrvnorp(); | |
| total_cap += line_width * (m_tech_param_ptr->calc_gatecap(Woutdrvnandn, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnandp, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnorn, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnorp, 1)); | |
| return total_cap; | |
| } | |
| double OutdrvUnit::calc_chgdata_cap() | |
| { | |
| double total_cap; | |
| double Woutdrvnandn = m_tech_param_ptr->get_Woutdrvnandn(); | |
| double Woutdrvnandp = m_tech_param_ptr->get_Woutdrvnandp(); | |
| double Woutdrvnorn = m_tech_param_ptr->get_Woutdrvnorn(); | |
| double Woutdrvnorp = m_tech_param_ptr->get_Woutdrvnorp(); | |
| total_cap = (m_tech_param_ptr->calc_gatecap(Woutdrvnandn, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnandp, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnorn, 1) + m_tech_param_ptr->calc_gatecap(Woutdrvnorp, 1)) / 2.0; | |
| return total_cap; | |
| } | |
| double OutdrvUnit::calc_outdata_cap(bool value_) | |
| { | |
| double total_cap = 0; | |
| // stage 1: drain cap of nand gate or nor gate | |
| if (value_) | |
| { | |
| //drain cap of nand gate | |
| double Woutdrvnandn = m_tech_param_ptr->get_Woutdrvnandn(); | |
| double Woutdrvnandp = m_tech_param_ptr->get_Woutdrvnandp(); | |
| total_cap = m_tech_param_ptr->calc_draincap(Woutdrvnandn, TechParameter::NCH, 2) + 2 * m_tech_param_ptr->calc_draincap(Woutdrvnandp, TechParameter::PCH, 1); | |
| } | |
| else | |
| { | |
| //drain cap of nor gate | |
| double Woutdrvnorn = m_tech_param_ptr->get_Woutdrvnorn(); | |
| double Woutdrvnorp = m_tech_param_ptr->get_Woutdrvnorp(); | |
| total_cap = 2 * m_tech_param_ptr->calc_draincap(Woutdrvnorn, TechParameter::NCH, 1) + m_tech_param_ptr->calc_draincap(Woutdrvnorp, TechParameter::PCH, 2); | |
| } | |
| // stage 2: gate cap of output inverter | |
| if (value_) | |
| { | |
| double Woutdriverp = m_tech_param_ptr->get_Woutdriverp(); | |
| total_cap += m_tech_param_ptr->calc_gatecap(Woutdriverp, 1); | |
| } | |
| else | |
| { | |
| double Woutdrivern = m_tech_param_ptr->get_Woutdrivern(); | |
| total_cap += m_tech_param_ptr->calc_gatecap(Woutdrivern, 1); | |
| } | |
| //drian cap of output inverter should be included into bus cap | |
| //TODO | |
| return total_cap; | |
| } | |
| double OutdrvUnit::calc_i_static() | |
| { | |
| //FIXME - add static power | |
| return 0; | |
| } | |