| /* | |
| * Copyright (c) 2009 Princeton University | |
| * Copyright (c) 2009 The Regents of the University of California | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Authors: Hangsheng Wang (Orion 1.0, Princeton) | |
| * Xinping Zhu (Orion 1.0, Princeton) | |
| * Xuning Chen (Orion 1.0, Princeton) | |
| * Bin Li (Orion 2.0, Princeton) | |
| * Kambiz Samadi (Orion 2.0, UC San Diego) | |
| */ | |
| #include "mem/ruby/network/orion/Clock.hh" | |
| #include "mem/ruby/network/orion/OrionConfig.hh" | |
| #include "mem/ruby/network/orion/TechParameter.hh" | |
| #include "mem/ruby/network/orion/Wire.hh" | |
| Clock::Clock( | |
| bool is_in_buf_, | |
| bool is_in_shared_switch_, | |
| bool is_out_buf_, | |
| bool is_out_shared_switch_, | |
| const OrionConfig* orion_cfg_ptr_ | |
| ) | |
| { | |
| m_is_in_buf = is_in_buf_; | |
| m_is_in_shared_switch = is_in_shared_switch_; | |
| m_is_out_buf = is_out_buf_; | |
| m_is_out_shared_switch = is_out_shared_switch_; | |
| m_orion_cfg_ptr = orion_cfg_ptr_; | |
| init(); | |
| } | |
| Clock::~Clock() | |
| {} | |
| double Clock::get_dynamic_energy() const | |
| { | |
| return (m_e_pipe_reg + m_e_htree); | |
| } | |
| double Clock::get_static_power() const | |
| { | |
| double vdd = m_tech_param_ptr->get_vdd(); | |
| return (m_i_static*vdd); | |
| } | |
| void Clock::init() | |
| { | |
| m_tech_param_ptr = m_orion_cfg_ptr->get_tech_param_ptr(); | |
| double e_factor = m_tech_param_ptr->get_EnergyFactor(); | |
| // Pipeline registers capacitive load on clock network | |
| uint32_t num_in_port = m_orion_cfg_ptr->get_num_in_port(); | |
| uint32_t num_out_port = m_orion_cfg_ptr->get_num_out_port(); | |
| uint32_t num_vclass = m_orion_cfg_ptr->get_num_vclass(); | |
| uint32_t num_vchannel = m_orion_cfg_ptr->get_num_vchannel(); | |
| uint32_t flit_width = m_orion_cfg_ptr->get_flit_width(); | |
| uint32_t num_pipe_reg = 0; | |
| // pipeline registers after the link traversal stage | |
| num_pipe_reg += num_in_port*flit_width; | |
| // pipeline registers for input buffer | |
| if (m_is_in_buf) | |
| { | |
| if (m_is_in_shared_switch) | |
| { | |
| num_pipe_reg += num_in_port*flit_width; | |
| } | |
| else | |
| { | |
| num_pipe_reg += num_in_port*num_vclass*num_vchannel*flit_width; | |
| } | |
| } | |
| // pipeline registers for crossbar | |
| if (m_is_out_shared_switch) | |
| { | |
| num_pipe_reg += num_out_port*flit_width; | |
| } | |
| else | |
| { | |
| num_pipe_reg += num_out_port*num_vclass*num_vchannel*flit_width; | |
| } | |
| // pipeline registers for output buffer | |
| if (m_is_out_buf) // assume output buffers share links | |
| { | |
| num_pipe_reg += num_out_port*flit_width; | |
| } | |
| double cap_clock = m_tech_param_ptr->get_ClockCap(); | |
| m_e_pipe_reg = num_pipe_reg*cap_clock*e_factor; | |
| //========================H_tree wiring load ========================*/ | |
| // The 1e-6 factor is to convert the "router_diagonal" back to meters. | |
| // To be consistent we use micro-meters unit for our inputs, but | |
| // the functions, internally, use meters. */ | |
| double i_static_nmos = 0; | |
| double i_static_pmos = 0; | |
| bool is_htree = m_orion_cfg_ptr->get<bool>("IS_HTREE_CLOCK"); | |
| if(is_htree) | |
| { | |
| const string& width_spacing_model_str = m_orion_cfg_ptr->get<string>("WIRE_WIDTH_SPACING"); | |
| const string& buf_scheme_str = m_orion_cfg_ptr->get<string>("WIRE_BUFFERING_MODEL"); | |
| bool is_shielding = m_orion_cfg_ptr->get<bool>("WIRE_IS_SHIELDING"); | |
| Wire wire(width_spacing_model_str, buf_scheme_str, is_shielding, m_tech_param_ptr); | |
| double router_diagonal = m_orion_cfg_ptr->get<double>("ROUTER_DIAGONAL"); | |
| double Clockwire = m_tech_param_ptr->get_ClockCap(); | |
| double htree_clockcap; | |
| int k; | |
| double h; | |
| double BufferNMOSOffCurrent = m_tech_param_ptr->get_BufferNMOSOffCurrent(); | |
| double BufferPMOSOffCurrent = m_tech_param_ptr->get_BufferPMOSOffCurrent(); | |
| if (m_tech_param_ptr->is_trans_type_hvt() || m_tech_param_ptr->is_trans_type_nvt()) | |
| { | |
| htree_clockcap = (4+4+2+2)*(router_diagonal*1e-6)*Clockwire; | |
| wire.calc_opt_buffering(&k, &h, ((4+4+2+2)*router_diagonal*1e-6)); | |
| i_static_nmos = BufferNMOSOffCurrent*h*k*15; | |
| i_static_pmos = BufferPMOSOffCurrent*h*k*15; | |
| } | |
| else | |
| { | |
| htree_clockcap = (8+4+4+4+4)*(router_diagonal*1e-6)*Clockwire; | |
| wire.calc_opt_buffering(&k, &h, ((4+4+2+2)*router_diagonal*1e-6)); | |
| i_static_nmos = BufferNMOSOffCurrent*h*k*29; | |
| i_static_pmos = BufferPMOSOffCurrent*h*k*15; | |
| } | |
| m_e_htree = (htree_clockcap+cap_clock)*e_factor; | |
| } | |
| else | |
| { | |
| m_e_htree = 0; | |
| } | |
| double SCALE_S = m_tech_param_ptr->get_SCALE_S(); | |
| double DFF_TAB_0 = m_tech_param_ptr->get_DFF_TAB(0); | |
| double Wdff = m_tech_param_ptr->get_Wdff(); | |
| m_i_static = (((i_static_nmos+i_static_pmos)/2)/SCALE_S + (num_pipe_reg*DFF_TAB_0*Wdff)); | |
| } |