| /* | |
| * Copyright (c) 2010 Massachusetts Institute of Technology | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Authors: Chia-Hsin Owen Chen | |
| * Tushar Krishna | |
| */ | |
| #include "mem/ruby/common/Global.hh" | |
| #include "mem/ruby/network/orion/NetworkPower.hh" | |
| #include "mem/ruby/network/orion/OrionConfig.hh" | |
| #include "mem/ruby/network/orion/OrionLink.hh" | |
| #include "mem/ruby/network/orion/OrionRouter.hh" | |
| void | |
| Router_d::calculate_power() | |
| { | |
| //Network Activities from garnet | |
| calculate_performance_numbers(); | |
| double sim_cycles = curCycle() - g_ruby_start; | |
| // Number of virtual networks/message classes declared in Ruby | |
| // maybe greater than active virtual networks. | |
| // Estimate active virtual networks for correct power estimates | |
| int num_active_vclass = 0; | |
| std::vector<bool > active_vclass_ary; | |
| active_vclass_ary.resize(m_virtual_networks); | |
| std::vector<double > vc_local_arbit_count_active; | |
| std::vector<double > vc_global_arbit_count_active; | |
| std::vector<double > buf_read_count_active; | |
| std::vector<double > buf_write_count_active; | |
| for (int i =0; i < m_virtual_networks; i++) { | |
| active_vclass_ary[i] = (get_net_ptr())->validVirtualNetwork(i); | |
| if (active_vclass_ary[i]) { | |
| num_active_vclass++; | |
| vc_local_arbit_count_active.push_back(vc_local_arbit_count[i]); | |
| vc_global_arbit_count_active.push_back(vc_global_arbit_count[i]); | |
| buf_read_count_active.push_back(buf_read_count[i]); | |
| buf_write_count_active.push_back(buf_write_count[i]); | |
| } | |
| else { | |
| // Inactive vclass | |
| assert(vc_global_arbit_count[i] == 0); | |
| assert(vc_local_arbit_count[i] == 0); | |
| } | |
| } | |
| // Orion Initialization | |
| OrionConfig* orion_cfg_ptr; | |
| OrionRouter* orion_rtr_ptr; | |
| static double freq_Hz; | |
| const string cfg_fn = "src/mem/ruby/network/orion/router.cfg"; | |
| orion_cfg_ptr = new OrionConfig(cfg_fn); | |
| freq_Hz = orion_cfg_ptr->get<double>("FREQUENCY"); | |
| uint32_t num_in_port = m_input_unit.size(); | |
| uint32_t num_out_port = m_output_unit.size(); | |
| uint32_t num_vclass = num_active_vclass; | |
| std::vector<uint32_t > vclass_type_ary; | |
| for (int i = 0; i < m_virtual_networks; i++) { | |
| if (active_vclass_ary[i]) { | |
| int temp_vc = i*m_vc_per_vnet; | |
| vclass_type_ary.push_back((uint32_t) | |
| m_network_ptr->get_vnet_type(temp_vc)); | |
| } | |
| } | |
| assert(vclass_type_ary.size() == num_active_vclass); | |
| uint32_t num_vc_per_vclass = m_vc_per_vnet; | |
| uint32_t in_buf_per_data_vc = m_network_ptr->getBuffersPerDataVC(); | |
| uint32_t in_buf_per_ctrl_vc = m_network_ptr->getBuffersPerCtrlVC(); | |
| //flit width in bits | |
| uint32_t flit_width_bits = m_network_ptr->getNiFlitSize() * 8; | |
| orion_rtr_ptr = new OrionRouter( | |
| num_in_port, | |
| num_out_port, | |
| num_vclass, | |
| vclass_type_ary, | |
| num_vc_per_vclass, | |
| in_buf_per_data_vc, | |
| in_buf_per_ctrl_vc, | |
| flit_width_bits, | |
| orion_cfg_ptr | |
| ); | |
| //Power Calculation | |
| double Pbuf_wr_dyn = 0.0; | |
| double Pbuf_rd_dyn = 0.0; | |
| double Pvc_arb_local_dyn = 0.0; | |
| double Pvc_arb_global_dyn = 0.0; | |
| double Psw_arb_local_dyn = 0.0; | |
| double Psw_arb_global_dyn = 0.0; | |
| double Pxbar_dyn = 0.0; | |
| double Pbuf_sta = 0.0; | |
| double Pvc_arb_sta = 0.0; | |
| double Psw_arb_sta = 0.0; | |
| double Pxbar_sta = 0.0; | |
| //Dynamic Power | |
| // Note: For each active arbiter in vc_arb or sw_arb of size T:1, | |
| // assuming half the requests (T/2) are high on average. | |
| // TODO: estimate expected value of requests from simulation. | |
| for (int i = 0; i < num_vclass; i++) { | |
| // Buffer Write | |
| Pbuf_wr_dyn += | |
| orion_rtr_ptr->calc_dynamic_energy_buf(i, WRITE_MODE, false)* | |
| (buf_write_count_active[i]/sim_cycles)*freq_Hz; | |
| // Buffer Read | |
| Pbuf_rd_dyn += | |
| orion_rtr_ptr->calc_dynamic_energy_buf(i, READ_MODE, false)* | |
| (buf_read_count_active[i]/sim_cycles)*freq_Hz; | |
| // VC arbitration local | |
| // Each input VC arbitrates for one output VC (in its vclass) | |
| // at its output port. | |
| // Arbiter size: num_vc_per_vclass:1 | |
| Pvc_arb_local_dyn += | |
| orion_rtr_ptr->calc_dynamic_energy_local_vc_arb(i, | |
| num_vc_per_vclass/2, false)* | |
| (vc_local_arbit_count_active[i]/sim_cycles)* | |
| freq_Hz; | |
| // VC arbitration global | |
| // Each output VC chooses one input VC out of all possible requesting | |
| // VCs (within vclass) at all input ports | |
| // Arbiter size: num_in_port*num_vc_per_vclass:1 | |
| // Round-robin at each input VC for outvcs in the local stage will | |
| // try to keep outvc conflicts to the minimum. | |
| // Assuming conflicts due to request for same outvc from | |
| // num_in_port/2 requests. | |
| // TODO: use garnet to estimate this | |
| Pvc_arb_global_dyn += | |
| orion_rtr_ptr->calc_dynamic_energy_global_vc_arb(i, | |
| num_in_port/2, false)* | |
| (vc_global_arbit_count_active[i]/sim_cycles)* | |
| freq_Hz; | |
| } | |
| // Switch Allocation Local | |
| // Each input port chooses one input VC as requestor | |
| // Arbiter size: num_vclass*num_vc_per_vclass:1 | |
| Psw_arb_local_dyn = | |
| orion_rtr_ptr->calc_dynamic_energy_local_sw_arb( | |
| num_vclass*num_vc_per_vclass/2, false)* | |
| (sw_local_arbit_count/sim_cycles)* | |
| freq_Hz; | |
| // Switch Allocation Global | |
| // Each output port chooses one input port as winner | |
| // Arbiter size: num_in_port:1 | |
| Psw_arb_global_dyn = | |
| orion_rtr_ptr->calc_dynamic_energy_global_sw_arb( | |
| num_in_port/2, false)* | |
| (sw_global_arbit_count/sim_cycles)* | |
| freq_Hz; | |
| // Crossbar | |
| Pxbar_dyn = | |
| orion_rtr_ptr->calc_dynamic_energy_xbar(false)* | |
| (crossbar_count/sim_cycles)*freq_Hz; | |
| // Total | |
| m_power_dyn = Pbuf_wr_dyn + Pbuf_rd_dyn + | |
| Pvc_arb_local_dyn + Pvc_arb_global_dyn + | |
| Psw_arb_local_dyn + Psw_arb_global_dyn + | |
| Pxbar_dyn; | |
| // Clock Power | |
| m_clk_power = orion_rtr_ptr->calc_dynamic_energy_clock()*freq_Hz; | |
| // Static Power | |
| Pbuf_sta = orion_rtr_ptr->get_static_power_buf(); | |
| Pvc_arb_sta = orion_rtr_ptr->get_static_power_va(); | |
| Psw_arb_sta = orion_rtr_ptr->get_static_power_sa(); | |
| Pxbar_sta = orion_rtr_ptr->get_static_power_xbar(); | |
| m_power_sta = Pbuf_sta + Pvc_arb_sta + Psw_arb_sta + Pxbar_sta; | |
| } | |
| void | |
| NetworkLink_d::calculate_power(double sim_cycles) | |
| { | |
| OrionConfig* orion_cfg_ptr; | |
| OrionLink* orion_link_ptr; | |
| static double freq_Hz; | |
| double link_length; | |
| // Initialization | |
| const string cfg_fn = "src/mem/ruby/network/orion/router.cfg"; | |
| orion_cfg_ptr = new OrionConfig(cfg_fn); | |
| freq_Hz = orion_cfg_ptr->get<double>("FREQUENCY"); | |
| link_length = orion_cfg_ptr->get<double>("LINK_LENGTH"); | |
| int channel_width_bits = channel_width*8; | |
| orion_link_ptr = new OrionLink( | |
| link_length, | |
| channel_width_bits, | |
| orion_cfg_ptr); | |
| // Dynamic Power | |
| // Assume half the bits flipped on every link activity | |
| double link_dynamic_energy = | |
| orion_link_ptr->calc_dynamic_energy(channel_width_bits/2); | |
| m_power_dyn = link_dynamic_energy * (m_link_utilized / sim_cycles) * | |
| freq_Hz; | |
| // Static Power | |
| // Calculates number of repeaters needed in link, and their static power | |
| // For short links, like 1mm, no repeaters are needed so static power is 0 | |
| m_power_sta = orion_link_ptr->get_static_power(); | |
| delete orion_link_ptr; | |
| delete orion_cfg_ptr; | |
| } |