| # Copyright (c) 2012-2013 ARM Limited |
| # All rights reserved. |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Authors: Andreas Hansson |
| # Ani Udipi |
| |
| from m5.params import * |
| from AbstractMemory import * |
| |
| # Enum for memory scheduling algorithms, currently First-Come |
| # First-Served and a First-Row Hit then First-Come First-Served |
| class MemSched(Enum): vals = ['fcfs', 'frfcfs'] |
| |
| # Enum for the address mapping, currently corresponding to either |
| # optimising for sequential accesses hitting in the open row, or |
| # striping across banks. |
| class AddrMap(Enum): vals = ['openmap', 'closemap'] |
| |
| # Enum for the page policy, either open or close. |
| class PageManage(Enum): vals = ['open', 'close'] |
| |
| # SimpleDRAM is a single-channel single-ported DRAM controller model |
| # that aims to model the most important system-level performance |
| # effects of a DRAM without getting into too much detail of the DRAM |
| # itself. |
| class SimpleDRAM(AbstractMemory): |
| type = 'SimpleDRAM' |
| cxx_header = "mem/simple_dram.hh" |
| |
| @classmethod |
| def makeMultiChannel(cls, nbr_mem_ctrls, mem_start_addr, mem_size, |
| intlv_high_bit = 11): |
| """ |
| Make a multi-channel configuration of this class. |
| |
| Create multiple instances of the specific class and set their |
| parameters such that the address range is interleaved between |
| them. |
| |
| Returns a list of controllers. |
| """ |
| import math |
| from m5.util import fatal |
| intlv_bits = int(math.log(nbr_mem_ctrls, 2)) |
| if 2 ** intlv_bits != nbr_mem_ctrls: |
| fatal("Number of memory channels must be a power of 2") |
| mem_ctrls = [] |
| for i in xrange(nbr_mem_ctrls): |
| # The default interleaving granularity is tuned to match a |
| # row buffer size of 32 cache lines of 64 bytes (starting |
| # at bit 11 for 2048 bytes). There is unfortunately no |
| # good way of checking this at instantiation time. |
| mem_ctrls.append(cls(range = AddrRange(mem_start_addr, |
| size = mem_size, |
| intlvHighBit = \ |
| intlv_high_bit, |
| intlvBits = intlv_bits, |
| intlvMatch = i), |
| channels = nbr_mem_ctrls)) |
| return mem_ctrls |
| |
| # single-ported on the system interface side, instantiate with a |
| # bus in front of the controller for multiple ports |
| port = SlavePort("Slave port") |
| |
| # the basic configuration of the controller architecture |
| write_buffer_size = Param.Unsigned(32, "Number of read queue entries") |
| read_buffer_size = Param.Unsigned(32, "Number of write queue entries") |
| |
| # threshold in percent for when to trigger writes and start |
| # emptying the write buffer as it starts to get full |
| write_thresh_perc = Param.Percent(70, "Threshold to trigger writes") |
| |
| # scheduler, address map and page policy |
| mem_sched_policy = Param.MemSched('frfcfs', "Memory scheduling policy") |
| addr_mapping = Param.AddrMap('openmap', "Address mapping policy") |
| page_policy = Param.PageManage('open', "Page closure management policy") |
| |
| # the physical organisation of the DRAM |
| lines_per_rowbuffer = Param.Unsigned("Row buffer size in cache lines") |
| ranks_per_channel = Param.Unsigned("Number of ranks per channel") |
| banks_per_rank = Param.Unsigned("Number of banks per rank") |
| # only used for the address mapping as the controller by |
| # construction is a single channel and multiple controllers have |
| # to be instantiated for a multi-channel configuration |
| channels = Param.Unsigned(1, "Number of channels") |
| |
| # timing behaviour and constraints - all in nanoseconds |
| |
| # the amount of time in nanoseconds from issuing an activate command |
| # to the data being available in the row buffer for a read/write |
| tRCD = Param.Latency("RAS to CAS delay") |
| |
| # the time from issuing a read/write command to seeing the actual data |
| tCL = Param.Latency("CAS latency") |
| |
| # minimum time between a precharge and subsequent activate |
| tRP = Param.Latency("Row precharge time") |
| |
| # time to complete a burst transfer, typically the burst length |
| # divided by two due to the DDR bus, but by making it a parameter |
| # it is easier to also evaluate SDR memories like WideIO. |
| # This parameter has to account for bus width and burst length. |
| # Adjustment also necessary if cache line size is greater than |
| # data size read/written by one full burst. |
| tBURST = Param.Latency("Burst duration (for DDR burst length / 2 cycles)") |
| |
| # time taken to complete one refresh cycle (N rows in all banks) |
| tRFC = Param.Latency("Refresh cycle time") |
| |
| # refresh command interval, how often a "ref" command needs |
| # to be sent. It is 7.8 us for a 64ms refresh requirement |
| tREFI = Param.Latency("Refresh command interval") |
| |
| # write-to-read turn around penalty, assumed same as read-to-write |
| tWTR = Param.Latency("Write to read switching time") |
| |
| # time window in which a maximum number of activates are allowed |
| # to take place, set to 0 to disable |
| tXAW = Param.Latency("X activation window") |
| activation_limit = Param.Unsigned("Max number of activates in window") |
| |
| # Currently rolled into other params |
| ###################################################################### |
| |
| # the minimum amount of time between a row being activated, and |
| # precharged (de-activated) |
| # tRAS - assumed to be 3 * tRP |
| |
| # tRC - assumed to be 4 * tRP |
| |
| # burst length for an access derived from peerBlockSize |
| |
| # High-level model of a single DDR3 x64 interface (one command and |
| # address bus), with default timings based on a DDR3-1600 4 Gbit part, |
| # which would amount to 4 Gbyte of memory in 8x8 or 8 GByte in 16x4 |
| # configuration. |
| class SimpleDDR3(SimpleDRAM): |
| # Assuming 64 byte cache lines, use a 2kbyte page size, this |
| # depends on the memory density |
| lines_per_rowbuffer = 32 |
| |
| # Use two ranks |
| ranks_per_channel = 2 |
| |
| # DDR3 has 8 banks in all configurations |
| banks_per_rank = 8 |
| |
| # DDR3-1600 11-11-11 |
| tRCD = '13.75ns' |
| tCL = '13.75ns' |
| tRP = '13.75ns' |
| |
| # Assuming 64 byte cache lines, across an x64 (8x8 or 16x4) |
| # interface, translates to BL8, 4 clocks @ 800 MHz |
| tBURST = '5ns' |
| |
| # DDR3, 4 Gb has a tRFC of 240 CK and tCK = 1.25 ns |
| tRFC = '300ns' |
| |
| # DDR3, <=85C, half for >85C |
| tREFI = '7.8us' |
| |
| # Greater of 4 CK or 7.5 ns, 4 CK @ 800 MHz = 5 ns |
| tWTR = '7.5ns' |
| |
| # With a 2kbyte page size, DDR3-1600 lands around 40 ns |
| tXAW = '40ns' |
| activation_limit = 4 |
| |
| |
| # High-level model of a single LPDDR2-S4 x64 interface (one |
| # command/address bus), with default timings based on a LPDDR2-1066 |
| # 4Gbit part, which whould amount to 1 GByte of memory in 2x32 or |
| # 2GByte in 4x16 configuration. |
| class SimpleLPDDR2_S4(SimpleDRAM): |
| # Assuming 64 byte cache lines, use a 2kbyte page size, this |
| # depends on the memory density |
| lines_per_rowbuffer = 32 |
| |
| # Use two ranks |
| ranks_per_channel = 2 |
| |
| # LPDDR2-S4 has 8 banks in all configurations |
| banks_per_rank = 8 |
| |
| # Fixed at 15 ns |
| tRCD = '15ns' |
| |
| # 8 CK read latency, 4 CK write latency @ 533 MHz, 1.876 ns cycle time |
| tCL = '15ns' |
| |
| # Pre-charge one bank 15 ns and all banks 18 ns |
| tRP = '18ns' |
| |
| # Assuming 64 byte cache lines, across a x64 interface (2x32 or |
| # 4x16), translates to BL8, 4 clocks @ 533 MHz |
| tBURST = '7.5ns' |
| |
| # LPDDR2-S4, 4 Gb |
| tRFC = '130ns' |
| tREFI = '3.9us' |
| |
| # Irrespective of speed grade, tWTR is 7.5 ns |
| tWTR = '7.5ns' |
| |
| # Irrespective of size, tFAW is 50 ns |
| tXAW = '50ns' |
| activation_limit = 4 |