| /* | |
| * Copyright (c) 2012-2014 ARM Limited | |
| * All rights reserved. | |
| * | |
| * The license below extends only to copyright in the software and shall | |
| * not be construed as granting a license to any other intellectual | |
| * property including but not limited to intellectual property relating | |
| * to a hardware implementation of the functionality of the software | |
| * licensed hereunder. You may use the software subject to the license | |
| * terms below provided that you ensure that this notice is replicated | |
| * unmodified and in its entirety in all distributions of the software, | |
| * modified or unmodified, in source code or in binary form. | |
| * | |
| * Copyright (c) 2003-2005 The Regents of The University of Michigan | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are | |
| * met: redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer; | |
| * redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution; | |
| * neither the name of the copyright holders nor the names of its | |
| * contributors may be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * Authors: Erik Hallnor | |
| * Andreas Sandberg | |
| */ | |
| /** @file | |
| * Definitions of a simple cache block class. | |
| */ | |
| #ifndef __CACHE_BLK_HH__ | |
| #define __CACHE_BLK_HH__ | |
| #include <list> | |
| #include "base/printable.hh" | |
| #include "mem/packet.hh" | |
| #include "mem/request.hh" | |
| #include "sim/core.hh" // for Tick | |
| /** | |
| * Cache block status bit assignments | |
| */ | |
| enum CacheBlkStatusBits { | |
| /** valid, readable */ | |
| BlkValid = 0x01, | |
| /** write permission */ | |
| BlkWritable = 0x02, | |
| /** read permission (yes, block can be valid but not readable) */ | |
| BlkReadable = 0x04, | |
| /** dirty (modified) */ | |
| BlkDirty = 0x08, | |
| /** block was referenced */ | |
| BlkReferenced = 0x10, | |
| /** block was a hardware prefetch yet unaccessed*/ | |
| BlkHWPrefetched = 0x20, | |
| /** block holds data from the secure memory space */ | |
| BlkSecure = 0x40, | |
| }; | |
| /** | |
| * A Basic Cache block. | |
| * Contains the tag, status, and a pointer to data. | |
| */ | |
| class CacheBlk | |
| { | |
| public: | |
| /** Task Id associated with this block */ | |
| uint32_t task_id; | |
| /** The address space ID of this block. */ | |
| int asid; | |
| /** Data block tag value. */ | |
| Addr tag; | |
| /** | |
| * Contains a copy of the data in this block for easy access. This is used | |
| * for efficient execution when the data could be actually stored in | |
| * another format (COW, compressed, sub-blocked, etc). In all cases the | |
| * data stored here should be kept consistant with the actual data | |
| * referenced by this block. | |
| */ | |
| uint8_t *data; | |
| /** the number of bytes stored in this block. */ | |
| int size; | |
| /** block state: OR of CacheBlkStatusBit */ | |
| typedef unsigned State; | |
| /** The current status of this block. @sa CacheBlockStatusBits */ | |
| State status; | |
| /** Which curTick() will this block be accessable */ | |
| Tick whenReady; | |
| /** | |
| * The set this block belongs to. | |
| * @todo Move this into subclasses when we fix CacheTags to use them. | |
| */ | |
| int set; | |
| /** whether this block has been touched */ | |
| bool isTouched; | |
| /** Number of references to this block since it was brought in. */ | |
| int refCount; | |
| /** holds the source requestor ID for this block. */ | |
| int srcMasterId; | |
| Tick tickInserted; | |
| protected: | |
| /** | |
| * Represents that the indicated thread context has a "lock" on | |
| * the block, in the LL/SC sense. | |
| */ | |
| class Lock { | |
| public: | |
| int contextId; // locking context | |
| Addr lowAddr; // low address of lock range | |
| Addr highAddr; // high address of lock range | |
| // check for matching execution context | |
| bool matchesContext(Request *req) | |
| { | |
| Addr req_low = req->getPaddr(); | |
| Addr req_high = req_low + req->getSize() -1; | |
| return (contextId == req->contextId()) && | |
| (req_low >= lowAddr) && (req_high <= highAddr); | |
| } | |
| bool overlapping(Request *req) | |
| { | |
| Addr req_low = req->getPaddr(); | |
| Addr req_high = req_low + req->getSize() - 1; | |
| return (req_low <= highAddr) && (req_high >= lowAddr); | |
| } | |
| Lock(Request *req) | |
| : contextId(req->contextId()), | |
| lowAddr(req->getPaddr()), | |
| highAddr(lowAddr + req->getSize() - 1) | |
| { | |
| } | |
| }; | |
| /** List of thread contexts that have performed a load-locked (LL) | |
| * on the block since the last store. */ | |
| std::list<Lock> lockList; | |
| public: | |
| CacheBlk() | |
| : task_id(ContextSwitchTaskId::Unknown), | |
| asid(-1), tag(0), data(0) ,size(0), status(0), whenReady(0), | |
| set(-1), isTouched(false), refCount(0), | |
| srcMasterId(Request::invldMasterId), | |
| tickInserted(0) | |
| {} | |
| /** | |
| * Copy the state of the given block into this one. | |
| * @param rhs The block to copy. | |
| * @return a const reference to this block. | |
| */ | |
| const CacheBlk& operator=(const CacheBlk& rhs) | |
| { | |
| asid = rhs.asid; | |
| tag = rhs.tag; | |
| data = rhs.data; | |
| size = rhs.size; | |
| status = rhs.status; | |
| whenReady = rhs.whenReady; | |
| set = rhs.set; | |
| refCount = rhs.refCount; | |
| task_id = rhs.task_id; | |
| return *this; | |
| } | |
| /** | |
| * Checks the write permissions of this block. | |
| * @return True if the block is writable. | |
| */ | |
| bool isWritable() const | |
| { | |
| const State needed_bits = BlkWritable | BlkValid; | |
| return (status & needed_bits) == needed_bits; | |
| } | |
| /** | |
| * Checks the read permissions of this block. Note that a block | |
| * can be valid but not readable if there is an outstanding write | |
| * upgrade miss. | |
| * @return True if the block is readable. | |
| */ | |
| bool isReadable() const | |
| { | |
| const State needed_bits = BlkReadable | BlkValid; | |
| return (status & needed_bits) == needed_bits; | |
| } | |
| /** | |
| * Checks that a block is valid. | |
| * @return True if the block is valid. | |
| */ | |
| bool isValid() const | |
| { | |
| return (status & BlkValid) != 0; | |
| } | |
| /** | |
| * Invalidate the block and clear all state. | |
| */ | |
| void invalidate() | |
| { | |
| status = 0; | |
| isTouched = false; | |
| clearLoadLocks(); | |
| } | |
| /** | |
| * Check to see if a block has been written. | |
| * @return True if the block is dirty. | |
| */ | |
| bool isDirty() const | |
| { | |
| return (status & BlkDirty) != 0; | |
| } | |
| /** | |
| * Check if this block has been referenced. | |
| * @return True if the block has been referenced. | |
| */ | |
| bool isReferenced() const | |
| { | |
| return (status & BlkReferenced) != 0; | |
| } | |
| /** | |
| * Check if this block was the result of a hardware prefetch, yet to | |
| * be touched. | |
| * @return True if the block was a hardware prefetch, unaccesed. | |
| */ | |
| bool wasPrefetched() const | |
| { | |
| return (status & BlkHWPrefetched) != 0; | |
| } | |
| /** | |
| * Check if this block holds data from the secure memory space. | |
| * @return True if the block holds data from the secure memory space. | |
| */ | |
| bool isSecure() const | |
| { | |
| return (status & BlkSecure) != 0; | |
| } | |
| /** | |
| * Track the fact that a local locked was issued to the block. If | |
| * multiple LLs get issued from the same context we could have | |
| * redundant records on the list, but that's OK, as they'll all | |
| * get blown away at the next store. | |
| */ | |
| void trackLoadLocked(PacketPtr pkt) | |
| { | |
| assert(pkt->isLLSC()); | |
| lockList.push_front(Lock(pkt->req)); | |
| } | |
| /** | |
| * Clear the list of valid load locks. Should be called whenever | |
| * block is written to or invalidated. | |
| */ | |
| void clearLoadLocks(Request *req = NULL) | |
| { | |
| if (!req) { | |
| // No request, invaldate all locks to this line | |
| lockList.clear(); | |
| } else { | |
| // Only invalidate locks that overlap with this request | |
| std::list<Lock>::iterator lock_itr = lockList.begin(); | |
| while (lock_itr != lockList.end()) { | |
| if (lock_itr->overlapping(req)) { | |
| lock_itr = lockList.erase(lock_itr); | |
| } else { | |
| ++lock_itr; | |
| } | |
| } | |
| } | |
| } | |
| /** | |
| * Pretty-print a tag, and interpret state bits to readable form | |
| * including mapping to a MOESI stat. | |
| * | |
| * @return string with basic state information | |
| */ | |
| std::string print() const | |
| { | |
| /** | |
| * state M O E S I | |
| * writable 1 0 1 0 0 | |
| * dirty 1 1 0 0 0 | |
| * valid 1 1 1 1 0 | |
| * | |
| * state writable dirty valid | |
| * M 1 1 1 | |
| * O 0 1 1 | |
| * E 1 0 1 | |
| * S 0 0 1 | |
| * I 0 0 0 | |
| **/ | |
| unsigned state = isWritable() << 2 | isDirty() << 1 | isValid(); | |
| char s = '?'; | |
| switch (state) { | |
| case 0b111: s = 'M'; break; | |
| case 0b011: s = 'O'; break; | |
| case 0b101: s = 'E'; break; | |
| case 0b001: s = 'S'; break; | |
| case 0b000: s = 'I'; break; | |
| default: s = 'T'; break; // @TODO add other types | |
| } | |
| return csprintf("state: %x (%c) valid: %d writable: %d readable: %d " | |
| "dirty: %d tag: %x", status, s, isValid(), | |
| isWritable(), isReadable(), isDirty(), tag); | |
| } | |
| /** | |
| * Handle interaction of load-locked operations and stores. | |
| * @return True if write should proceed, false otherwise. Returns | |
| * false only in the case of a failed store conditional. | |
| */ | |
| bool checkWrite(PacketPtr pkt) | |
| { | |
| Request *req = pkt->req; | |
| if (pkt->isLLSC()) { | |
| // it's a store conditional... have to check for matching | |
| // load locked. | |
| bool success = false; | |
| for (std::list<Lock>::iterator i = lockList.begin(); | |
| i != lockList.end(); ++i) | |
| { | |
| if (i->matchesContext(req)) { | |
| // it's a store conditional, and as far as the memory | |
| // system can tell, the requesting context's lock is | |
| // still valid. | |
| success = true; | |
| break; | |
| } | |
| } | |
| req->setExtraData(success ? 1 : 0); | |
| clearLoadLocks(req); | |
| return success; | |
| } else { | |
| // for *all* stores (conditional or otherwise) we have to | |
| // clear the list of load-locks as they're all invalid now. | |
| clearLoadLocks(req); | |
| return true; | |
| } | |
| } | |
| }; | |
| /** | |
| * Simple class to provide virtual print() method on cache blocks | |
| * without allocating a vtable pointer for every single cache block. | |
| * Just wrap the CacheBlk object in an instance of this before passing | |
| * to a function that requires a Printable object. | |
| */ | |
| class CacheBlkPrintWrapper : public Printable | |
| { | |
| CacheBlk *blk; | |
| public: | |
| CacheBlkPrintWrapper(CacheBlk *_blk) : blk(_blk) {} | |
| virtual ~CacheBlkPrintWrapper() {} | |
| void print(std::ostream &o, int verbosity = 0, | |
| const std::string &prefix = "") const; | |
| }; | |
| /** | |
| * Wrap a method and present it as a cache block visitor. | |
| * | |
| * For example the forEachBlk method in the tag arrays expects a | |
| * callable object/function as their parameter. This class wraps a | |
| * method in an object and presents callable object that adheres to | |
| * the cache block visitor protocol. | |
| */ | |
| template <typename T, typename BlkType> | |
| class CacheBlkVisitorWrapper | |
| { | |
| public: | |
| typedef bool (T::*visitorPtr)(BlkType &blk); | |
| CacheBlkVisitorWrapper(T &_obj, visitorPtr _visitor) | |
| : obj(_obj), visitor(_visitor) {} | |
| bool operator()(BlkType &blk) { | |
| return (obj.*visitor)(blk); | |
| } | |
| private: | |
| T &obj; | |
| visitorPtr visitor; | |
| }; | |
| /** | |
| * Cache block visitor that determines if there are dirty blocks in a | |
| * cache. | |
| * | |
| * Use with the forEachBlk method in the tag array to determine if the | |
| * array contains dirty blocks. | |
| */ | |
| template <typename BlkType> | |
| class CacheBlkIsDirtyVisitor | |
| { | |
| public: | |
| CacheBlkIsDirtyVisitor() | |
| : _isDirty(false) {} | |
| bool operator()(BlkType &blk) { | |
| if (blk.isDirty()) { | |
| _isDirty = true; | |
| return false; | |
| } else { | |
| return true; | |
| } | |
| } | |
| /** | |
| * Does the array contain a dirty line? | |
| * | |
| * \return true if yes, false otherwise. | |
| */ | |
| bool isDirty() const { return _isDirty; }; | |
| private: | |
| bool _isDirty; | |
| }; | |
| #endif //__CACHE_BLK_HH__ |