| /* |
| * Copyright (c) 2012-2013 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2007 MIPS Technologies, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Korey Sewell |
| * |
| */ |
| |
| #ifndef __CPU_INORDER_CPU_HH__ |
| #define __CPU_INORDER_CPU_HH__ |
| |
| #include <iostream> |
| #include <list> |
| #include <queue> |
| #include <set> |
| #include <vector> |
| |
| #include "arch/isa_traits.hh" |
| #include "arch/registers.hh" |
| #include "arch/types.hh" |
| #include "base/statistics.hh" |
| #include "base/types.hh" |
| #include "config/the_isa.hh" |
| #include "cpu/inorder/inorder_dyn_inst.hh" |
| #include "cpu/inorder/pipeline_stage.hh" |
| #include "cpu/inorder/pipeline_traits.hh" |
| #include "cpu/inorder/reg_dep_map.hh" |
| #include "cpu/inorder/thread_state.hh" |
| #include "cpu/o3/dep_graph.hh" |
| #include "cpu/o3/rename_map.hh" |
| #include "cpu/activity.hh" |
| #include "cpu/base.hh" |
| #include "cpu/simple_thread.hh" |
| #include "cpu/timebuf.hh" |
| #include "mem/packet.hh" |
| #include "mem/port.hh" |
| #include "mem/request.hh" |
| #include "sim/eventq.hh" |
| #include "sim/process.hh" |
| |
| class CacheUnit; |
| class ThreadContext; |
| class MemInterface; |
| class MemObject; |
| class Process; |
| class ResourcePool; |
| |
| class InOrderCPU : public BaseCPU |
| { |
| |
| protected: |
| typedef ThePipeline::Params Params; |
| typedef InOrderThreadState Thread; |
| |
| //ISA TypeDefs |
| typedef TheISA::IntReg IntReg; |
| typedef TheISA::FloatReg FloatReg; |
| typedef TheISA::FloatRegBits FloatRegBits; |
| typedef TheISA::MiscReg MiscReg; |
| typedef TheISA::RegIndex RegIndex; |
| |
| //DynInstPtr TypeDefs |
| typedef ThePipeline::DynInstPtr DynInstPtr; |
| typedef std::list<DynInstPtr>::iterator ListIt; |
| |
| //TimeBuffer TypeDefs |
| typedef TimeBuffer<InterStageStruct> StageQueue; |
| |
| friend class Resource; |
| |
| public: |
| /** Constructs a CPU with the given parameters. */ |
| InOrderCPU(Params *params); |
| /* Destructor */ |
| ~InOrderCPU(); |
| |
| void verifyMemoryMode() const; |
| |
| /** Return a reference to the data port. */ |
| virtual MasterPort &getDataPort() { return dataPort; } |
| |
| /** Return a reference to the instruction port. */ |
| virtual MasterPort &getInstPort() { return instPort; } |
| |
| /** CPU ID */ |
| int cpu_id; |
| |
| // SE Mode ASIDs |
| ThreadID asid[ThePipeline::MaxThreads]; |
| |
| /** Type of core that this is */ |
| std::string coreType; |
| |
| // Only need for SE MODE |
| enum ThreadModel { |
| Single, |
| SMT, |
| SwitchOnCacheMiss |
| }; |
| |
| ThreadModel threadModel; |
| |
| int readCpuId() { return cpu_id; } |
| |
| void setCpuId(int val) { cpu_id = val; } |
| |
| Params *cpu_params; |
| |
| public: |
| enum Status { |
| Running, |
| Idle, |
| Halted, |
| Blocked, |
| SwitchedOut |
| }; |
| |
| /** Overall CPU status. */ |
| Status _status; |
| private: |
| |
| /** |
| * CachePort class for the in-order CPU, interacting with a |
| * specific CacheUnit in the pipeline. |
| */ |
| class CachePort : public MasterPort |
| { |
| |
| private: |
| /** Pointer to cache unit */ |
| CacheUnit *cacheUnit; |
| |
| public: |
| /** Default constructor. */ |
| CachePort(CacheUnit *_cacheUnit, const std::string& name); |
| |
| protected: |
| |
| /** Timing version of receive */ |
| bool recvTimingResp(PacketPtr pkt); |
| |
| /** Handles doing a retry of a failed timing request. */ |
| void recvRetry(); |
| |
| /** Ignoring snoops for now. */ |
| void recvTimingSnoopReq(PacketPtr pkt) { } |
| }; |
| |
| /** Define TickEvent for the CPU */ |
| class TickEvent : public Event |
| { |
| private: |
| /** Pointer to the CPU. */ |
| InOrderCPU *cpu; |
| |
| public: |
| /** Constructs a tick event. */ |
| TickEvent(InOrderCPU *c); |
| |
| /** Processes a tick event, calling tick() on the CPU. */ |
| void process(); |
| |
| /** Returns the description of the tick event. */ |
| const char *description() const; |
| }; |
| |
| /** The tick event used for scheduling CPU ticks. */ |
| TickEvent tickEvent; |
| |
| /** Schedule tick event, regardless of its current state. */ |
| void scheduleTickEvent(Cycles delay) |
| { |
| assert(!tickEvent.scheduled() || tickEvent.squashed()); |
| reschedule(&tickEvent, clockEdge(delay), true); |
| } |
| |
| /** Unschedule tick event, regardless of its current state. */ |
| void unscheduleTickEvent() |
| { |
| if (tickEvent.scheduled()) |
| tickEvent.squash(); |
| } |
| |
| public: |
| // List of Events That can be scheduled from |
| // within the CPU. |
| // NOTE(1): The Resource Pool also uses this event list |
| // to schedule events broadcast to all resources interfaces |
| // NOTE(2): CPU Events usually need to schedule a corresponding resource |
| // pool event. |
| enum CPUEventType { |
| ActivateThread, |
| ActivateNextReadyThread, |
| DeactivateThread, |
| HaltThread, |
| SuspendThread, |
| Trap, |
| Syscall, |
| SquashFromMemStall, |
| UpdatePCs, |
| NumCPUEvents |
| }; |
| |
| static std::string eventNames[NumCPUEvents]; |
| |
| enum CPUEventPri { |
| InOrderCPU_Pri = Event::CPU_Tick_Pri, |
| Syscall_Pri = Event::CPU_Tick_Pri + 9, |
| ActivateNextReadyThread_Pri = Event::CPU_Tick_Pri + 10 |
| }; |
| |
| /** Define CPU Event */ |
| class CPUEvent : public Event |
| { |
| protected: |
| InOrderCPU *cpu; |
| |
| public: |
| CPUEventType cpuEventType; |
| ThreadID tid; |
| DynInstPtr inst; |
| Fault fault; |
| unsigned vpe; |
| short syscall_num; |
| |
| public: |
| /** Constructs a CPU event. */ |
| CPUEvent(InOrderCPU *_cpu, CPUEventType e_type, Fault fault, |
| ThreadID _tid, DynInstPtr inst, CPUEventPri event_pri); |
| |
| /** Set Type of Event To Be Scheduled */ |
| void setEvent(CPUEventType e_type, Fault _fault, ThreadID _tid, |
| DynInstPtr _inst) |
| { |
| fault = _fault; |
| cpuEventType = e_type; |
| tid = _tid; |
| inst = _inst; |
| vpe = 0; |
| } |
| |
| /** Processes a CPU event. */ |
| void process(); |
| |
| /** Returns the description of the CPU event. */ |
| const char *description() const; |
| |
| /** Schedule Event */ |
| void scheduleEvent(Cycles delay); |
| |
| /** Unschedule This Event */ |
| void unscheduleEvent(); |
| }; |
| |
| /** Schedule a CPU Event */ |
| void scheduleCpuEvent(CPUEventType cpu_event, Fault fault, ThreadID tid, |
| DynInstPtr inst, Cycles delay = Cycles(0), |
| CPUEventPri event_pri = InOrderCPU_Pri); |
| |
| public: |
| |
| /** Width (processing bandwidth) of each stage */ |
| int stageWidth; |
| |
| /** Interface between the CPU and CPU resources. */ |
| ResourcePool *resPool; |
| |
| /** Instruction used to signify that there is no *real* instruction in |
| buffer slot */ |
| DynInstPtr dummyInst[ThePipeline::MaxThreads]; |
| DynInstPtr dummyBufferInst; |
| DynInstPtr dummyReqInst; |
| DynInstPtr dummyTrapInst[ThePipeline::MaxThreads]; |
| |
| /** Used by resources to signify a denied access to a resource. */ |
| ResourceRequest *dummyReq[ThePipeline::MaxThreads]; |
| |
| /** The Pipeline Stages for the CPU */ |
| PipelineStage *pipelineStage[ThePipeline::NumStages]; |
| |
| /** Program Counters */ |
| TheISA::PCState pc[ThePipeline::MaxThreads]; |
| |
| /** Last Committed PC */ |
| TheISA::PCState lastCommittedPC[ThePipeline::MaxThreads]; |
| |
| /** The Register File for the CPU */ |
| union { |
| FloatReg f[ThePipeline::MaxThreads][TheISA::NumFloatRegs]; |
| FloatRegBits i[ThePipeline::MaxThreads][TheISA::NumFloatRegs]; |
| } floatRegs; |
| TheISA::IntReg intRegs[ThePipeline::MaxThreads][TheISA::NumIntRegs]; |
| |
| /** ISA state */ |
| std::vector<TheISA::ISA *> isa; |
| |
| /** Dependency Tracker for Integer & Floating Point Regs */ |
| RegDepMap archRegDepMap[ThePipeline::MaxThreads]; |
| |
| /** Register Types Used in Dependency Tracking */ |
| enum RegType { IntType, FloatType, MiscType, NumRegTypes}; |
| |
| /** Global communication structure */ |
| TimeBuffer<TimeStruct> timeBuffer; |
| |
| /** Communication structure that sits in between pipeline stages */ |
| StageQueue *stageQueue[ThePipeline::NumStages-1]; |
| |
| TheISA::TLB *getITBPtr(); |
| TheISA::TLB *getDTBPtr(); |
| |
| TheISA::Decoder *getDecoderPtr(unsigned tid); |
| |
| /** Accessor Type for the SkedCache */ |
| typedef uint32_t SkedID; |
| |
| /** Cache of Instruction Schedule using the instruction's name as a key */ |
| static m5::hash_map<SkedID, ThePipeline::RSkedPtr> skedCache; |
| |
| typedef m5::hash_map<SkedID, ThePipeline::RSkedPtr>::iterator SkedCacheIt; |
| |
| /** Initialized to last iterator in map, signifying a invalid entry |
| on map searches |
| */ |
| SkedCacheIt endOfSkedIt; |
| |
| ThePipeline::RSkedPtr frontEndSked; |
| ThePipeline::RSkedPtr faultSked; |
| |
| /** Add a new instruction schedule to the schedule cache */ |
| void addToSkedCache(DynInstPtr inst, ThePipeline::RSkedPtr inst_sked) |
| { |
| SkedID sked_id = genSkedID(inst); |
| assert(skedCache.find(sked_id) == skedCache.end()); |
| skedCache[sked_id] = inst_sked; |
| } |
| |
| |
| /** Find a instruction schedule */ |
| ThePipeline::RSkedPtr lookupSked(DynInstPtr inst) |
| { |
| SkedID sked_id = genSkedID(inst); |
| SkedCacheIt lookup_it = skedCache.find(sked_id); |
| |
| if (lookup_it != endOfSkedIt) { |
| return (*lookup_it).second; |
| } else { |
| return NULL; |
| } |
| } |
| |
| static const uint8_t INST_OPCLASS = 26; |
| static const uint8_t INST_LOAD = 25; |
| static const uint8_t INST_STORE = 24; |
| static const uint8_t INST_CONTROL = 23; |
| static const uint8_t INST_NONSPEC = 22; |
| static const uint8_t INST_DEST_REGS = 18; |
| static const uint8_t INST_SRC_REGS = 14; |
| static const uint8_t INST_SPLIT_DATA = 13; |
| |
| inline SkedID genSkedID(DynInstPtr inst) |
| { |
| SkedID id = 0; |
| id = (inst->opClass() << INST_OPCLASS) | |
| (inst->isLoad() << INST_LOAD) | |
| (inst->isStore() << INST_STORE) | |
| (inst->isControl() << INST_CONTROL) | |
| (inst->isNonSpeculative() << INST_NONSPEC) | |
| (inst->numDestRegs() << INST_DEST_REGS) | |
| (inst->numSrcRegs() << INST_SRC_REGS) | |
| (inst->splitInst << INST_SPLIT_DATA); |
| return id; |
| } |
| |
| ThePipeline::RSkedPtr createFrontEndSked(); |
| ThePipeline::RSkedPtr createFaultSked(); |
| ThePipeline::RSkedPtr createBackEndSked(DynInstPtr inst); |
| |
| class StageScheduler { |
| private: |
| ThePipeline::RSkedPtr rsked; |
| int stageNum; |
| int nextTaskPriority; |
| |
| public: |
| StageScheduler(ThePipeline::RSkedPtr _rsked, int stage_num) |
| : rsked(_rsked), stageNum(stage_num), |
| nextTaskPriority(0) |
| { } |
| |
| void needs(int unit, int request) { |
| rsked->push(new ScheduleEntry( |
| stageNum, nextTaskPriority++, unit, request |
| )); |
| } |
| |
| void needs(int unit, int request, int param) { |
| rsked->push(new ScheduleEntry( |
| stageNum, nextTaskPriority++, unit, request, param |
| )); |
| } |
| }; |
| |
| private: |
| |
| /** Data port. Note that it has to appear after the resPool. */ |
| CachePort dataPort; |
| |
| /** Instruction port. Note that it has to appear after the resPool. */ |
| CachePort instPort; |
| |
| public: |
| |
| /** Registers statistics. */ |
| void regStats(); |
| |
| /** Ticks CPU, calling tick() on each stage, and checking the overall |
| * activity to see if the CPU should deschedule itself. |
| */ |
| void tick(); |
| |
| /** Initialize the CPU */ |
| void init(); |
| |
| /** HW return from error interrupt. */ |
| Fault hwrei(ThreadID tid); |
| |
| bool simPalCheck(int palFunc, ThreadID tid); |
| |
| void checkForInterrupts(); |
| |
| /** Returns the Fault for any valid interrupt. */ |
| Fault getInterrupts(); |
| |
| /** Processes any an interrupt fault. */ |
| void processInterrupts(Fault interrupt); |
| |
| /** Halts the CPU. */ |
| void halt() { panic("Halt not implemented!\n"); } |
| |
| /** Check if this address is a valid instruction address. */ |
| bool validInstAddr(Addr addr) { return true; } |
| |
| /** Check if this address is a valid data address. */ |
| bool validDataAddr(Addr addr) { return true; } |
| |
| /** Schedule a syscall on the CPU */ |
| void syscallContext(Fault fault, ThreadID tid, DynInstPtr inst, |
| Cycles delay = Cycles(0)); |
| |
| /** Executes a syscall.*/ |
| void syscall(int64_t callnum, ThreadID tid); |
| |
| /** Schedule a trap on the CPU */ |
| void trapContext(Fault fault, ThreadID tid, DynInstPtr inst, |
| Cycles delay = Cycles(0)); |
| |
| /** Perform trap to Handle Given Fault */ |
| void trap(Fault fault, ThreadID tid, DynInstPtr inst); |
| |
| /** Schedule thread activation on the CPU */ |
| void activateContext(ThreadID tid, Cycles delay = Cycles(0)); |
| |
| /** Add Thread to Active Threads List. */ |
| void activateThread(ThreadID tid); |
| |
| /** Activate Thread In Each Pipeline Stage */ |
| void activateThreadInPipeline(ThreadID tid); |
| |
| /** Schedule Thread Activation from Ready List */ |
| void activateNextReadyContext(Cycles delay = Cycles(0)); |
| |
| /** Add Thread From Ready List to Active Threads List. */ |
| void activateNextReadyThread(); |
| |
| /** Schedule a thread deactivation on the CPU */ |
| void deactivateContext(ThreadID tid, Cycles delay = Cycles(0)); |
| |
| /** Remove from Active Thread List */ |
| void deactivateThread(ThreadID tid); |
| |
| /** Schedule a thread suspension on the CPU */ |
| void suspendContext(ThreadID tid); |
| |
| /** Suspend Thread, Remove from Active Threads List, Add to Suspend List */ |
| void suspendThread(ThreadID tid); |
| |
| /** Schedule a thread halt on the CPU */ |
| void haltContext(ThreadID tid); |
| |
| /** Halt Thread, Remove from Active Thread List, Place Thread on Halted |
| * Threads List |
| */ |
| void haltThread(ThreadID tid); |
| |
| /** squashFromMemStall() - sets up a squash event |
| * squashDueToMemStall() - squashes pipeline |
| * @note: maybe squashContext/squashThread would be better? |
| */ |
| void squashFromMemStall(DynInstPtr inst, ThreadID tid, |
| Cycles delay = Cycles(0)); |
| void squashDueToMemStall(int stage_num, InstSeqNum seq_num, ThreadID tid); |
| |
| void removePipelineStalls(ThreadID tid); |
| void squashThreadInPipeline(ThreadID tid); |
| void squashBehindMemStall(int stage_num, InstSeqNum seq_num, ThreadID tid); |
| |
| PipelineStage* getPipeStage(int stage_num); |
| |
| int |
| contextId() |
| { |
| hack_once("return a bogus context id"); |
| return 0; |
| } |
| |
| /** Update The Order In Which We Process Threads. */ |
| void updateThreadPriority(); |
| |
| /** Switches a Pipeline Stage to Active. (Unused currently) */ |
| void switchToActive(int stage_idx) |
| { /*pipelineStage[stage_idx]->switchToActive();*/ } |
| |
| /** Get the current instruction sequence number, and increment it. */ |
| InstSeqNum getAndIncrementInstSeq(ThreadID tid) |
| { return globalSeqNum[tid]++; } |
| |
| /** Get the current instruction sequence number, and increment it. */ |
| InstSeqNum nextInstSeqNum(ThreadID tid) |
| { return globalSeqNum[tid]; } |
| |
| /** Increment Instruction Sequence Number */ |
| void incrInstSeqNum(ThreadID tid) |
| { globalSeqNum[tid]++; } |
| |
| /** Set Instruction Sequence Number */ |
| void setInstSeqNum(ThreadID tid, InstSeqNum seq_num) |
| { |
| globalSeqNum[tid] = seq_num; |
| } |
| |
| /** Get & Update Next Event Number */ |
| InstSeqNum getNextEventNum() |
| { |
| #ifdef DEBUG |
| return cpuEventNum++; |
| #else |
| return 0; |
| #endif |
| } |
| |
| /** Register file accessors */ |
| uint64_t readIntReg(RegIndex reg_idx, ThreadID tid); |
| |
| FloatReg readFloatReg(RegIndex reg_idx, ThreadID tid); |
| |
| FloatRegBits readFloatRegBits(RegIndex reg_idx, ThreadID tid); |
| |
| void setIntReg(RegIndex reg_idx, uint64_t val, ThreadID tid); |
| |
| void setFloatReg(RegIndex reg_idx, FloatReg val, ThreadID tid); |
| |
| void setFloatRegBits(RegIndex reg_idx, FloatRegBits val, ThreadID tid); |
| |
| RegType inline getRegType(RegIndex reg_idx) |
| { |
| if (reg_idx < TheISA::FP_Base_DepTag) |
| return IntType; |
| else if (reg_idx < TheISA::Ctrl_Base_DepTag) |
| return FloatType; |
| else |
| return MiscType; |
| } |
| |
| RegIndex flattenRegIdx(RegIndex reg_idx, RegType ®_type, ThreadID tid); |
| |
| /** Reads a miscellaneous register. */ |
| MiscReg readMiscRegNoEffect(int misc_reg, ThreadID tid = 0); |
| |
| /** Reads a misc. register, including any side effects the read |
| * might have as defined by the architecture. |
| */ |
| MiscReg readMiscReg(int misc_reg, ThreadID tid = 0); |
| |
| /** Sets a miscellaneous register. */ |
| void setMiscRegNoEffect(int misc_reg, const MiscReg &val, |
| ThreadID tid = 0); |
| |
| /** Sets a misc. register, including any side effects the write |
| * might have as defined by the architecture. |
| */ |
| void setMiscReg(int misc_reg, const MiscReg &val, ThreadID tid = 0); |
| |
| /** Reads a int/fp/misc reg. from another thread depending on ISA-defined |
| * target thread |
| */ |
| uint64_t readRegOtherThread(unsigned misc_reg, |
| ThreadID tid = InvalidThreadID); |
| |
| /** Sets a int/fp/misc reg. from another thread depending on an ISA-defined |
| * target thread |
| */ |
| void setRegOtherThread(unsigned misc_reg, const MiscReg &val, |
| ThreadID tid); |
| |
| /** Reads the commit PC of a specific thread. */ |
| TheISA::PCState |
| pcState(ThreadID tid) |
| { |
| return pc[tid]; |
| } |
| |
| /** Sets the commit PC of a specific thread. */ |
| void |
| pcState(const TheISA::PCState &newPC, ThreadID tid) |
| { |
| pc[tid] = newPC; |
| } |
| |
| Addr instAddr(ThreadID tid) { return pc[tid].instAddr(); } |
| Addr nextInstAddr(ThreadID tid) { return pc[tid].nextInstAddr(); } |
| MicroPC microPC(ThreadID tid) { return pc[tid].microPC(); } |
| |
| /** Function to add instruction onto the head of the list of the |
| * instructions. Used when new instructions are fetched. |
| */ |
| ListIt addInst(DynInstPtr inst); |
| |
| /** Find instruction on instruction list */ |
| ListIt findInst(InstSeqNum seq_num, ThreadID tid); |
| |
| /** Function to tell the CPU that an instruction has completed. */ |
| void instDone(DynInstPtr inst, ThreadID tid); |
| |
| /** Add Instructions to the CPU Remove List*/ |
| void addToRemoveList(DynInstPtr inst); |
| |
| /** Remove an instruction from CPU */ |
| void removeInst(DynInstPtr inst); |
| |
| /** Remove all instructions younger than the given sequence number. */ |
| void removeInstsUntil(const InstSeqNum &seq_num,ThreadID tid); |
| |
| /** Removes the instruction pointed to by the iterator. */ |
| inline void squashInstIt(const ListIt inst_it, ThreadID tid); |
| |
| /** Cleans up all instructions on the instruction remove list. */ |
| void cleanUpRemovedInsts(); |
| |
| /** Cleans up all events on the CPU event remove list. */ |
| void cleanUpRemovedEvents(); |
| |
| /** Debug function to print all instructions on the list. */ |
| void dumpInsts(); |
| |
| /** Forwards an instruction read to the appropriate data |
| * resource (indexes into Resource Pool thru "dataPortIdx") |
| */ |
| Fault read(DynInstPtr inst, Addr addr, |
| uint8_t *data, unsigned size, unsigned flags); |
| |
| /** Forwards an instruction write. to the appropriate data |
| * resource (indexes into Resource Pool thru "dataPortIdx") |
| */ |
| Fault write(DynInstPtr inst, uint8_t *data, unsigned size, |
| Addr addr, unsigned flags, uint64_t *write_res = NULL); |
| |
| public: |
| /** Per-Thread List of all the instructions in flight. */ |
| std::list<DynInstPtr> instList[ThePipeline::MaxThreads]; |
| |
| /** List of all the instructions that will be removed at the end of this |
| * cycle. |
| */ |
| std::queue<ListIt> removeList; |
| |
| bool trapPending[ThePipeline::MaxThreads]; |
| |
| /** List of all the cpu event requests that will be removed at the end of |
| * the current cycle. |
| */ |
| std::queue<Event*> cpuEventRemoveList; |
| |
| /** Records if instructions need to be removed this cycle due to |
| * being retired or squashed. |
| */ |
| bool removeInstsThisCycle; |
| |
| /** True if there is non-speculative Inst Active In Pipeline. Lets any |
| * execution unit know, NOT to execute while the instruction is active. |
| */ |
| bool nonSpecInstActive[ThePipeline::MaxThreads]; |
| |
| /** Instruction Seq. Num of current non-speculative instruction. */ |
| InstSeqNum nonSpecSeqNum[ThePipeline::MaxThreads]; |
| |
| /** Instruction Seq. Num of last instruction squashed in pipeline */ |
| InstSeqNum squashSeqNum[ThePipeline::MaxThreads]; |
| |
| /** Last Cycle that the CPU squashed instruction end. */ |
| Tick lastSquashCycle[ThePipeline::MaxThreads]; |
| |
| std::list<ThreadID> fetchPriorityList; |
| |
| protected: |
| /** Active Threads List */ |
| std::list<ThreadID> activeThreads; |
| |
| /** Ready Threads List */ |
| std::list<ThreadID> readyThreads; |
| |
| /** Suspended Threads List */ |
| std::list<ThreadID> suspendedThreads; |
| |
| /** Halted Threads List */ |
| std::list<ThreadID> haltedThreads; |
| |
| /** Thread Status Functions */ |
| bool isThreadActive(ThreadID tid); |
| bool isThreadReady(ThreadID tid); |
| bool isThreadSuspended(ThreadID tid); |
| |
| private: |
| /** The activity recorder; used to tell if the CPU has any |
| * activity remaining or if it can go to idle and deschedule |
| * itself. |
| */ |
| ActivityRecorder activityRec; |
| |
| public: |
| /** Number of Active Threads in the CPU */ |
| ThreadID numActiveThreads() { return activeThreads.size(); } |
| |
| /** Thread id of active thread |
| * Only used for SwitchOnCacheMiss model. |
| * Assumes only 1 thread active |
| */ |
| ThreadID activeThreadId() |
| { |
| if (numActiveThreads() > 0) |
| return activeThreads.front(); |
| else |
| return InvalidThreadID; |
| } |
| |
| |
| /** Records that there was time buffer activity this cycle. */ |
| void activityThisCycle() { activityRec.activity(); } |
| |
| /** Changes a stage's status to active within the activity recorder. */ |
| void activateStage(const int idx) |
| { activityRec.activateStage(idx); } |
| |
| /** Changes a stage's status to inactive within the activity recorder. */ |
| void deactivateStage(const int idx) |
| { activityRec.deactivateStage(idx); } |
| |
| /** Wakes the CPU, rescheduling the CPU if it's not already active. */ |
| void wakeCPU(); |
| |
| virtual void wakeup(); |
| |
| /* LL/SC debug functionality |
| unsigned stCondFails; |
| |
| unsigned readStCondFailures() |
| { return stCondFails; } |
| |
| unsigned setStCondFailures(unsigned st_fails) |
| { return stCondFails = st_fails; } |
| */ |
| |
| /** Returns a pointer to a thread context. */ |
| ThreadContext *tcBase(ThreadID tid = 0) |
| { |
| return thread[tid]->getTC(); |
| } |
| |
| /** Count the Total Instructions Committed in the CPU. */ |
| virtual Counter totalInsts() const |
| { |
| Counter total(0); |
| |
| for (ThreadID tid = 0; tid < (ThreadID)thread.size(); tid++) |
| total += thread[tid]->numInst; |
| |
| return total; |
| } |
| |
| /** Count the Total Ops Committed in the CPU. */ |
| virtual Counter totalOps() const |
| { |
| Counter total(0); |
| |
| for (ThreadID tid = 0; tid < (ThreadID)thread.size(); tid++) |
| total += thread[tid]->numOp; |
| |
| return total; |
| } |
| |
| /** Pointer to the system. */ |
| System *system; |
| |
| /** The global sequence number counter. */ |
| InstSeqNum globalSeqNum[ThePipeline::MaxThreads]; |
| |
| #ifdef DEBUG |
| /** The global event number counter. */ |
| InstSeqNum cpuEventNum; |
| |
| /** Number of resource requests active in CPU **/ |
| unsigned resReqCount; |
| #endif |
| |
| Addr lockAddr; |
| |
| /** Temporary fix for the lock flag, works in the UP case. */ |
| bool lockFlag; |
| |
| /** Counter of how many stages have completed draining */ |
| int drainCount; |
| |
| /** Pointers to all of the threads in the CPU. */ |
| std::vector<Thread *> thread; |
| |
| /** Per-Stage Instruction Tracing */ |
| bool stageTracing; |
| |
| /** The cycle that the CPU was last running, used for statistics. */ |
| Tick lastRunningCycle; |
| |
| void updateContextSwitchStats(); |
| unsigned instsPerSwitch; |
| Stats::Average instsPerCtxtSwitch; |
| Stats::Scalar numCtxtSwitches; |
| |
| /** Update Thread , used for statistic purposes*/ |
| inline void tickThreadStats(); |
| |
| /** Per-Thread Tick */ |
| Stats::Vector threadCycles; |
| |
| /** Tick for SMT */ |
| Stats::Scalar smtCycles; |
| |
| /** Stat for total number of times the CPU is descheduled. */ |
| Stats::Scalar timesIdled; |
| |
| /** Stat for total number of cycles the CPU spends descheduled or no |
| * stages active. |
| */ |
| Stats::Scalar idleCycles; |
| |
| /** Stat for total number of cycles the CPU is active. */ |
| Stats::Scalar runCycles; |
| |
| /** Percentage of cycles a stage was active */ |
| Stats::Formula activity; |
| |
| /** Instruction Mix Stats */ |
| Stats::Scalar comLoads; |
| Stats::Scalar comStores; |
| Stats::Scalar comBranches; |
| Stats::Scalar comNops; |
| Stats::Scalar comNonSpec; |
| Stats::Scalar comInts; |
| Stats::Scalar comFloats; |
| |
| /** Stat for the number of committed instructions per thread. */ |
| Stats::Vector committedInsts; |
| |
| /** Stat for the number of committed ops per thread. */ |
| Stats::Vector committedOps; |
| |
| /** Stat for the number of committed instructions per thread. */ |
| Stats::Vector smtCommittedInsts; |
| |
| /** Stat for the total number of committed instructions. */ |
| Stats::Scalar totalCommittedInsts; |
| |
| /** Stat for the CPI per thread. */ |
| Stats::Formula cpi; |
| |
| /** Stat for the SMT-CPI per thread. */ |
| Stats::Formula smtCpi; |
| |
| /** Stat for the total CPI. */ |
| Stats::Formula totalCpi; |
| |
| /** Stat for the IPC per thread. */ |
| Stats::Formula ipc; |
| |
| /** Stat for the total IPC. */ |
| Stats::Formula smtIpc; |
| |
| /** Stat for the total IPC. */ |
| Stats::Formula totalIpc; |
| }; |
| |
| #endif // __CPU_O3_CPU_HH__ |
