| /* |
| * Copyright (c) 2010-2013 ARM Limited |
| * All rights reserved. |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2004-2006 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Kevin Lim |
| */ |
| |
| // @todo: Fix the instantaneous communication among all the stages within |
| // iew. There's a clear delay between issue and execute, yet backwards |
| // communication happens simultaneously. |
| |
| #include <queue> |
| |
| #include "arch/utility.hh" |
| #include "config/the_isa.hh" |
| #include "cpu/checker/cpu.hh" |
| #include "cpu/o3/fu_pool.hh" |
| #include "cpu/o3/iew.hh" |
| #include "cpu/timebuf.hh" |
| #include "debug/Activity.hh" |
| #include "debug/Decode.hh" |
| #include "debug/Drain.hh" |
| #include "debug/IEW.hh" |
| #include "debug/O3PipeView.hh" |
| #include "params/DerivO3CPU.hh" |
| |
| using namespace std; |
| |
| template<class Impl> |
| DefaultIEW<Impl>::DefaultIEW(O3CPU *_cpu, DerivO3CPUParams *params) |
| : issueToExecQueue(params->backComSize, params->forwardComSize), |
| cpu(_cpu), |
| instQueue(_cpu, this, params), |
| ldstQueue(_cpu, this, params), |
| fuPool(params->fuPool), |
| commitToIEWDelay(params->commitToIEWDelay), |
| renameToIEWDelay(params->renameToIEWDelay), |
| issueToExecuteDelay(params->issueToExecuteDelay), |
| dispatchWidth(params->dispatchWidth), |
| issueWidth(params->issueWidth), |
| wbOutstanding(0), |
| wbWidth(params->wbWidth), |
| numThreads(params->numThreads) |
| { |
| _status = Active; |
| exeStatus = Running; |
| wbStatus = Idle; |
| |
| // Setup wire to read instructions coming from issue. |
| fromIssue = issueToExecQueue.getWire(-issueToExecuteDelay); |
| |
| // Instruction queue needs the queue between issue and execute. |
| instQueue.setIssueToExecuteQueue(&issueToExecQueue); |
| |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| dispatchStatus[tid] = Running; |
| stalls[tid].commit = false; |
| fetchRedirect[tid] = false; |
| } |
| |
| wbMax = wbWidth * params->wbDepth; |
| |
| updateLSQNextCycle = false; |
| |
| ableToIssue = true; |
| |
| skidBufferMax = (3 * (renameToIEWDelay * params->renameWidth)) + issueWidth; |
| } |
| |
| template <class Impl> |
| std::string |
| DefaultIEW<Impl>::name() const |
| { |
| return cpu->name() + ".iew"; |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::regStats() |
| { |
| using namespace Stats; |
| |
| instQueue.regStats(); |
| ldstQueue.regStats(); |
| |
| iewIdleCycles |
| .name(name() + ".iewIdleCycles") |
| .desc("Number of cycles IEW is idle"); |
| |
| iewSquashCycles |
| .name(name() + ".iewSquashCycles") |
| .desc("Number of cycles IEW is squashing"); |
| |
| iewBlockCycles |
| .name(name() + ".iewBlockCycles") |
| .desc("Number of cycles IEW is blocking"); |
| |
| iewUnblockCycles |
| .name(name() + ".iewUnblockCycles") |
| .desc("Number of cycles IEW is unblocking"); |
| |
| iewDispatchedInsts |
| .name(name() + ".iewDispatchedInsts") |
| .desc("Number of instructions dispatched to IQ"); |
| |
| iewDispSquashedInsts |
| .name(name() + ".iewDispSquashedInsts") |
| .desc("Number of squashed instructions skipped by dispatch"); |
| |
| iewDispLoadInsts |
| .name(name() + ".iewDispLoadInsts") |
| .desc("Number of dispatched load instructions"); |
| |
| iewDispStoreInsts |
| .name(name() + ".iewDispStoreInsts") |
| .desc("Number of dispatched store instructions"); |
| |
| iewDispNonSpecInsts |
| .name(name() + ".iewDispNonSpecInsts") |
| .desc("Number of dispatched non-speculative instructions"); |
| |
| iewIQFullEvents |
| .name(name() + ".iewIQFullEvents") |
| .desc("Number of times the IQ has become full, causing a stall"); |
| |
| iewLSQFullEvents |
| .name(name() + ".iewLSQFullEvents") |
| .desc("Number of times the LSQ has become full, causing a stall"); |
| |
| memOrderViolationEvents |
| .name(name() + ".memOrderViolationEvents") |
| .desc("Number of memory order violations"); |
| |
| predictedTakenIncorrect |
| .name(name() + ".predictedTakenIncorrect") |
| .desc("Number of branches that were predicted taken incorrectly"); |
| |
| predictedNotTakenIncorrect |
| .name(name() + ".predictedNotTakenIncorrect") |
| .desc("Number of branches that were predicted not taken incorrectly"); |
| |
| branchMispredicts |
| .name(name() + ".branchMispredicts") |
| .desc("Number of branch mispredicts detected at execute"); |
| |
| branchMispredicts = predictedTakenIncorrect + predictedNotTakenIncorrect; |
| |
| iewExecutedInsts |
| .name(name() + ".iewExecutedInsts") |
| .desc("Number of executed instructions"); |
| |
| iewExecLoadInsts |
| .init(cpu->numThreads) |
| .name(name() + ".iewExecLoadInsts") |
| .desc("Number of load instructions executed") |
| .flags(total); |
| |
| iewExecSquashedInsts |
| .name(name() + ".iewExecSquashedInsts") |
| .desc("Number of squashed instructions skipped in execute"); |
| |
| iewExecutedSwp |
| .init(cpu->numThreads) |
| .name(name() + ".exec_swp") |
| .desc("number of swp insts executed") |
| .flags(total); |
| |
| iewExecutedNop |
| .init(cpu->numThreads) |
| .name(name() + ".exec_nop") |
| .desc("number of nop insts executed") |
| .flags(total); |
| |
| iewExecutedRefs |
| .init(cpu->numThreads) |
| .name(name() + ".exec_refs") |
| .desc("number of memory reference insts executed") |
| .flags(total); |
| |
| iewExecutedBranches |
| .init(cpu->numThreads) |
| .name(name() + ".exec_branches") |
| .desc("Number of branches executed") |
| .flags(total); |
| |
| iewExecStoreInsts |
| .name(name() + ".exec_stores") |
| .desc("Number of stores executed") |
| .flags(total); |
| iewExecStoreInsts = iewExecutedRefs - iewExecLoadInsts; |
| |
| iewExecRate |
| .name(name() + ".exec_rate") |
| .desc("Inst execution rate") |
| .flags(total); |
| |
| iewExecRate = iewExecutedInsts / cpu->numCycles; |
| |
| iewInstsToCommit |
| .init(cpu->numThreads) |
| .name(name() + ".wb_sent") |
| .desc("cumulative count of insts sent to commit") |
| .flags(total); |
| |
| writebackCount |
| .init(cpu->numThreads) |
| .name(name() + ".wb_count") |
| .desc("cumulative count of insts written-back") |
| .flags(total); |
| |
| producerInst |
| .init(cpu->numThreads) |
| .name(name() + ".wb_producers") |
| .desc("num instructions producing a value") |
| .flags(total); |
| |
| consumerInst |
| .init(cpu->numThreads) |
| .name(name() + ".wb_consumers") |
| .desc("num instructions consuming a value") |
| .flags(total); |
| |
| wbPenalized |
| .init(cpu->numThreads) |
| .name(name() + ".wb_penalized") |
| .desc("number of instrctions required to write to 'other' IQ") |
| .flags(total); |
| |
| wbPenalizedRate |
| .name(name() + ".wb_penalized_rate") |
| .desc ("fraction of instructions written-back that wrote to 'other' IQ") |
| .flags(total); |
| |
| wbPenalizedRate = wbPenalized / writebackCount; |
| |
| wbFanout |
| .name(name() + ".wb_fanout") |
| .desc("average fanout of values written-back") |
| .flags(total); |
| |
| wbFanout = producerInst / consumerInst; |
| |
| wbRate |
| .name(name() + ".wb_rate") |
| .desc("insts written-back per cycle") |
| .flags(total); |
| wbRate = writebackCount / cpu->numCycles; |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::startupStage() |
| { |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| toRename->iewInfo[tid].usedIQ = true; |
| toRename->iewInfo[tid].freeIQEntries = |
| instQueue.numFreeEntries(tid); |
| |
| toRename->iewInfo[tid].usedLSQ = true; |
| toRename->iewInfo[tid].freeLSQEntries = |
| ldstQueue.numFreeEntries(tid); |
| } |
| |
| // Initialize the checker's dcache port here |
| if (cpu->checker) { |
| cpu->checker->setDcachePort(&cpu->getDataPort()); |
| } |
| |
| cpu->activateStage(O3CPU::IEWIdx); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::setTimeBuffer(TimeBuffer<TimeStruct> *tb_ptr) |
| { |
| timeBuffer = tb_ptr; |
| |
| // Setup wire to read information from time buffer, from commit. |
| fromCommit = timeBuffer->getWire(-commitToIEWDelay); |
| |
| // Setup wire to write information back to previous stages. |
| toRename = timeBuffer->getWire(0); |
| |
| toFetch = timeBuffer->getWire(0); |
| |
| // Instruction queue also needs main time buffer. |
| instQueue.setTimeBuffer(tb_ptr); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::setRenameQueue(TimeBuffer<RenameStruct> *rq_ptr) |
| { |
| renameQueue = rq_ptr; |
| |
| // Setup wire to read information from rename queue. |
| fromRename = renameQueue->getWire(-renameToIEWDelay); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::setIEWQueue(TimeBuffer<IEWStruct> *iq_ptr) |
| { |
| iewQueue = iq_ptr; |
| |
| // Setup wire to write instructions to commit. |
| toCommit = iewQueue->getWire(0); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::setActiveThreads(list<ThreadID> *at_ptr) |
| { |
| activeThreads = at_ptr; |
| |
| ldstQueue.setActiveThreads(at_ptr); |
| instQueue.setActiveThreads(at_ptr); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::setScoreboard(Scoreboard *sb_ptr) |
| { |
| scoreboard = sb_ptr; |
| } |
| |
| template <class Impl> |
| bool |
| DefaultIEW<Impl>::isDrained() const |
| { |
| bool drained(ldstQueue.isDrained()); |
| |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| if (!insts[tid].empty()) { |
| DPRINTF(Drain, "%i: Insts not empty.\n", tid); |
| drained = false; |
| } |
| if (!skidBuffer[tid].empty()) { |
| DPRINTF(Drain, "%i: Skid buffer not empty.\n", tid); |
| drained = false; |
| } |
| } |
| |
| // Also check the FU pool as instructions are "stored" in FU |
| // completion events until they are done and not accounted for |
| // above |
| if (drained && !fuPool->isDrained()) { |
| DPRINTF(Drain, "FU pool still busy.\n"); |
| drained = false; |
| } |
| |
| return drained; |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::drainSanityCheck() const |
| { |
| assert(isDrained()); |
| |
| instQueue.drainSanityCheck(); |
| ldstQueue.drainSanityCheck(); |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::takeOverFrom() |
| { |
| // Reset all state. |
| _status = Active; |
| exeStatus = Running; |
| wbStatus = Idle; |
| |
| instQueue.takeOverFrom(); |
| ldstQueue.takeOverFrom(); |
| fuPool->takeOverFrom(); |
| |
| startupStage(); |
| cpu->activityThisCycle(); |
| |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| dispatchStatus[tid] = Running; |
| stalls[tid].commit = false; |
| fetchRedirect[tid] = false; |
| } |
| |
| updateLSQNextCycle = false; |
| |
| for (int i = 0; i < issueToExecQueue.getSize(); ++i) { |
| issueToExecQueue.advance(); |
| } |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::squash(ThreadID tid) |
| { |
| DPRINTF(IEW, "[tid:%i]: Squashing all instructions.\n", tid); |
| |
| // Tell the IQ to start squashing. |
| instQueue.squash(tid); |
| |
| // Tell the LDSTQ to start squashing. |
| ldstQueue.squash(fromCommit->commitInfo[tid].doneSeqNum, tid); |
| updatedQueues = true; |
| |
| // Clear the skid buffer in case it has any data in it. |
| DPRINTF(IEW, "[tid:%i]: Removing skidbuffer instructions until [sn:%i].\n", |
| tid, fromCommit->commitInfo[tid].doneSeqNum); |
| |
| while (!skidBuffer[tid].empty()) { |
| if (skidBuffer[tid].front()->isLoad() || |
| skidBuffer[tid].front()->isStore() ) { |
| toRename->iewInfo[tid].dispatchedToLSQ++; |
| } |
| |
| toRename->iewInfo[tid].dispatched++; |
| |
| skidBuffer[tid].pop(); |
| } |
| |
| emptyRenameInsts(tid); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::squashDueToBranch(DynInstPtr &inst, ThreadID tid) |
| { |
| DPRINTF(IEW, "[tid:%i]: Squashing from a specific instruction, PC: %s " |
| "[sn:%i].\n", tid, inst->pcState(), inst->seqNum); |
| |
| if (toCommit->squash[tid] == false || |
| inst->seqNum < toCommit->squashedSeqNum[tid]) { |
| toCommit->squash[tid] = true; |
| toCommit->squashedSeqNum[tid] = inst->seqNum; |
| toCommit->branchTaken[tid] = inst->pcState().branching(); |
| |
| TheISA::PCState pc = inst->pcState(); |
| TheISA::advancePC(pc, inst->staticInst); |
| |
| toCommit->pc[tid] = pc; |
| toCommit->mispredictInst[tid] = inst; |
| toCommit->includeSquashInst[tid] = false; |
| |
| wroteToTimeBuffer = true; |
| } |
| |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::squashDueToMemOrder(DynInstPtr &inst, ThreadID tid) |
| { |
| DPRINTF(IEW, "[tid:%i]: Memory violation, squashing violator and younger " |
| "insts, PC: %s [sn:%i].\n", tid, inst->pcState(), inst->seqNum); |
| // Need to include inst->seqNum in the following comparison to cover the |
| // corner case when a branch misprediction and a memory violation for the |
| // same instruction (e.g. load PC) are detected in the same cycle. In this |
| // case the memory violator should take precedence over the branch |
| // misprediction because it requires the violator itself to be included in |
| // the squash. |
| if (toCommit->squash[tid] == false || |
| inst->seqNum <= toCommit->squashedSeqNum[tid]) { |
| toCommit->squash[tid] = true; |
| |
| toCommit->squashedSeqNum[tid] = inst->seqNum; |
| toCommit->pc[tid] = inst->pcState(); |
| toCommit->mispredictInst[tid] = NULL; |
| |
| // Must include the memory violator in the squash. |
| toCommit->includeSquashInst[tid] = true; |
| |
| wroteToTimeBuffer = true; |
| } |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::squashDueToMemBlocked(DynInstPtr &inst, ThreadID tid) |
| { |
| DPRINTF(IEW, "[tid:%i]: Memory blocked, squashing load and younger insts, " |
| "PC: %s [sn:%i].\n", tid, inst->pcState(), inst->seqNum); |
| if (toCommit->squash[tid] == false || |
| inst->seqNum < toCommit->squashedSeqNum[tid]) { |
| toCommit->squash[tid] = true; |
| |
| toCommit->squashedSeqNum[tid] = inst->seqNum; |
| toCommit->pc[tid] = inst->pcState(); |
| toCommit->mispredictInst[tid] = NULL; |
| |
| // Must include the broadcasted SN in the squash. |
| toCommit->includeSquashInst[tid] = true; |
| |
| ldstQueue.setLoadBlockedHandled(tid); |
| |
| wroteToTimeBuffer = true; |
| } |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::block(ThreadID tid) |
| { |
| DPRINTF(IEW, "[tid:%u]: Blocking.\n", tid); |
| |
| if (dispatchStatus[tid] != Blocked && |
| dispatchStatus[tid] != Unblocking) { |
| toRename->iewBlock[tid] = true; |
| wroteToTimeBuffer = true; |
| } |
| |
| // Add the current inputs to the skid buffer so they can be |
| // reprocessed when this stage unblocks. |
| skidInsert(tid); |
| |
| dispatchStatus[tid] = Blocked; |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::unblock(ThreadID tid) |
| { |
| DPRINTF(IEW, "[tid:%i]: Reading instructions out of the skid " |
| "buffer %u.\n",tid, tid); |
| |
| // If the skid bufffer is empty, signal back to previous stages to unblock. |
| // Also switch status to running. |
| if (skidBuffer[tid].empty()) { |
| toRename->iewUnblock[tid] = true; |
| wroteToTimeBuffer = true; |
| DPRINTF(IEW, "[tid:%i]: Done unblocking.\n",tid); |
| dispatchStatus[tid] = Running; |
| } |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::wakeDependents(DynInstPtr &inst) |
| { |
| instQueue.wakeDependents(inst); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::rescheduleMemInst(DynInstPtr &inst) |
| { |
| instQueue.rescheduleMemInst(inst); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::replayMemInst(DynInstPtr &inst) |
| { |
| instQueue.replayMemInst(inst); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::instToCommit(DynInstPtr &inst) |
| { |
| // This function should not be called after writebackInsts in a |
| // single cycle. That will cause problems with an instruction |
| // being added to the queue to commit without being processed by |
| // writebackInsts prior to being sent to commit. |
| |
| // First check the time slot that this instruction will write |
| // to. If there are free write ports at the time, then go ahead |
| // and write the instruction to that time. If there are not, |
| // keep looking back to see where's the first time there's a |
| // free slot. |
| while ((*iewQueue)[wbCycle].insts[wbNumInst]) { |
| ++wbNumInst; |
| if (wbNumInst == wbWidth) { |
| ++wbCycle; |
| wbNumInst = 0; |
| } |
| |
| assert((wbCycle * wbWidth + wbNumInst) <= wbMax); |
| } |
| |
| DPRINTF(IEW, "Current wb cycle: %i, width: %i, numInst: %i\nwbActual:%i\n", |
| wbCycle, wbWidth, wbNumInst, wbCycle * wbWidth + wbNumInst); |
| // Add finished instruction to queue to commit. |
| (*iewQueue)[wbCycle].insts[wbNumInst] = inst; |
| (*iewQueue)[wbCycle].size++; |
| } |
| |
| template <class Impl> |
| unsigned |
| DefaultIEW<Impl>::validInstsFromRename() |
| { |
| unsigned inst_count = 0; |
| |
| for (int i=0; i<fromRename->size; i++) { |
| if (!fromRename->insts[i]->isSquashed()) |
| inst_count++; |
| } |
| |
| return inst_count; |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::skidInsert(ThreadID tid) |
| { |
| DynInstPtr inst = NULL; |
| |
| while (!insts[tid].empty()) { |
| inst = insts[tid].front(); |
| |
| insts[tid].pop(); |
| |
| DPRINTF(Decode,"[tid:%i]: Inserting [sn:%lli] PC:%s into " |
| "dispatch skidBuffer %i\n",tid, inst->seqNum, |
| inst->pcState(),tid); |
| |
| skidBuffer[tid].push(inst); |
| } |
| |
| assert(skidBuffer[tid].size() <= skidBufferMax && |
| "Skidbuffer Exceeded Max Size"); |
| } |
| |
| template<class Impl> |
| int |
| DefaultIEW<Impl>::skidCount() |
| { |
| int max=0; |
| |
| list<ThreadID>::iterator threads = activeThreads->begin(); |
| list<ThreadID>::iterator end = activeThreads->end(); |
| |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| unsigned thread_count = skidBuffer[tid].size(); |
| if (max < thread_count) |
| max = thread_count; |
| } |
| |
| return max; |
| } |
| |
| template<class Impl> |
| bool |
| DefaultIEW<Impl>::skidsEmpty() |
| { |
| list<ThreadID>::iterator threads = activeThreads->begin(); |
| list<ThreadID>::iterator end = activeThreads->end(); |
| |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| |
| if (!skidBuffer[tid].empty()) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::updateStatus() |
| { |
| bool any_unblocking = false; |
| |
| list<ThreadID>::iterator threads = activeThreads->begin(); |
| list<ThreadID>::iterator end = activeThreads->end(); |
| |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| |
| if (dispatchStatus[tid] == Unblocking) { |
| any_unblocking = true; |
| break; |
| } |
| } |
| |
| // If there are no ready instructions waiting to be scheduled by the IQ, |
| // and there's no stores waiting to write back, and dispatch is not |
| // unblocking, then there is no internal activity for the IEW stage. |
| instQueue.intInstQueueReads++; |
| if (_status == Active && !instQueue.hasReadyInsts() && |
| !ldstQueue.willWB() && !any_unblocking) { |
| DPRINTF(IEW, "IEW switching to idle\n"); |
| |
| deactivateStage(); |
| |
| _status = Inactive; |
| } else if (_status == Inactive && (instQueue.hasReadyInsts() || |
| ldstQueue.willWB() || |
| any_unblocking)) { |
| // Otherwise there is internal activity. Set to active. |
| DPRINTF(IEW, "IEW switching to active\n"); |
| |
| activateStage(); |
| |
| _status = Active; |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::resetEntries() |
| { |
| instQueue.resetEntries(); |
| ldstQueue.resetEntries(); |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::readStallSignals(ThreadID tid) |
| { |
| if (fromCommit->commitBlock[tid]) { |
| stalls[tid].commit = true; |
| } |
| |
| if (fromCommit->commitUnblock[tid]) { |
| assert(stalls[tid].commit); |
| stalls[tid].commit = false; |
| } |
| } |
| |
| template <class Impl> |
| bool |
| DefaultIEW<Impl>::checkStall(ThreadID tid) |
| { |
| bool ret_val(false); |
| |
| if (stalls[tid].commit) { |
| DPRINTF(IEW,"[tid:%i]: Stall from Commit stage detected.\n",tid); |
| ret_val = true; |
| } else if (instQueue.isFull(tid)) { |
| DPRINTF(IEW,"[tid:%i]: Stall: IQ is full.\n",tid); |
| ret_val = true; |
| } else if (ldstQueue.isFull(tid)) { |
| DPRINTF(IEW,"[tid:%i]: Stall: LSQ is full\n",tid); |
| |
| if (ldstQueue.numLoads(tid) > 0 ) { |
| |
| DPRINTF(IEW,"[tid:%i]: LSQ oldest load: [sn:%i] \n", |
| tid,ldstQueue.getLoadHeadSeqNum(tid)); |
| } |
| |
| if (ldstQueue.numStores(tid) > 0) { |
| |
| DPRINTF(IEW,"[tid:%i]: LSQ oldest store: [sn:%i] \n", |
| tid,ldstQueue.getStoreHeadSeqNum(tid)); |
| } |
| |
| ret_val = true; |
| } else if (ldstQueue.isStalled(tid)) { |
| DPRINTF(IEW,"[tid:%i]: Stall: LSQ stall detected.\n",tid); |
| ret_val = true; |
| } |
| |
| return ret_val; |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::checkSignalsAndUpdate(ThreadID tid) |
| { |
| // Check if there's a squash signal, squash if there is |
| // Check stall signals, block if there is. |
| // If status was Blocked |
| // if so then go to unblocking |
| // If status was Squashing |
| // check if squashing is not high. Switch to running this cycle. |
| |
| readStallSignals(tid); |
| |
| if (fromCommit->commitInfo[tid].squash) { |
| squash(tid); |
| |
| if (dispatchStatus[tid] == Blocked || |
| dispatchStatus[tid] == Unblocking) { |
| toRename->iewUnblock[tid] = true; |
| wroteToTimeBuffer = true; |
| } |
| |
| dispatchStatus[tid] = Squashing; |
| fetchRedirect[tid] = false; |
| return; |
| } |
| |
| if (fromCommit->commitInfo[tid].robSquashing) { |
| DPRINTF(IEW, "[tid:%i]: ROB is still squashing.\n", tid); |
| |
| dispatchStatus[tid] = Squashing; |
| emptyRenameInsts(tid); |
| wroteToTimeBuffer = true; |
| return; |
| } |
| |
| if (checkStall(tid)) { |
| block(tid); |
| dispatchStatus[tid] = Blocked; |
| return; |
| } |
| |
| if (dispatchStatus[tid] == Blocked) { |
| // Status from previous cycle was blocked, but there are no more stall |
| // conditions. Switch over to unblocking. |
| DPRINTF(IEW, "[tid:%i]: Done blocking, switching to unblocking.\n", |
| tid); |
| |
| dispatchStatus[tid] = Unblocking; |
| |
| unblock(tid); |
| |
| return; |
| } |
| |
| if (dispatchStatus[tid] == Squashing) { |
| // Switch status to running if rename isn't being told to block or |
| // squash this cycle. |
| DPRINTF(IEW, "[tid:%i]: Done squashing, switching to running.\n", |
| tid); |
| |
| dispatchStatus[tid] = Running; |
| |
| return; |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::sortInsts() |
| { |
| int insts_from_rename = fromRename->size; |
| #ifdef DEBUG |
| for (ThreadID tid = 0; tid < numThreads; tid++) |
| assert(insts[tid].empty()); |
| #endif |
| for (int i = 0; i < insts_from_rename; ++i) { |
| insts[fromRename->insts[i]->threadNumber].push(fromRename->insts[i]); |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::emptyRenameInsts(ThreadID tid) |
| { |
| DPRINTF(IEW, "[tid:%i]: Removing incoming rename instructions\n", tid); |
| |
| while (!insts[tid].empty()) { |
| |
| if (insts[tid].front()->isLoad() || |
| insts[tid].front()->isStore() ) { |
| toRename->iewInfo[tid].dispatchedToLSQ++; |
| } |
| |
| toRename->iewInfo[tid].dispatched++; |
| |
| insts[tid].pop(); |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::wakeCPU() |
| { |
| cpu->wakeCPU(); |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::activityThisCycle() |
| { |
| DPRINTF(Activity, "Activity this cycle.\n"); |
| cpu->activityThisCycle(); |
| } |
| |
| template <class Impl> |
| inline void |
| DefaultIEW<Impl>::activateStage() |
| { |
| DPRINTF(Activity, "Activating stage.\n"); |
| cpu->activateStage(O3CPU::IEWIdx); |
| } |
| |
| template <class Impl> |
| inline void |
| DefaultIEW<Impl>::deactivateStage() |
| { |
| DPRINTF(Activity, "Deactivating stage.\n"); |
| cpu->deactivateStage(O3CPU::IEWIdx); |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::dispatch(ThreadID tid) |
| { |
| // If status is Running or idle, |
| // call dispatchInsts() |
| // If status is Unblocking, |
| // buffer any instructions coming from rename |
| // continue trying to empty skid buffer |
| // check if stall conditions have passed |
| |
| if (dispatchStatus[tid] == Blocked) { |
| ++iewBlockCycles; |
| |
| } else if (dispatchStatus[tid] == Squashing) { |
| ++iewSquashCycles; |
| } |
| |
| // Dispatch should try to dispatch as many instructions as its bandwidth |
| // will allow, as long as it is not currently blocked. |
| if (dispatchStatus[tid] == Running || |
| dispatchStatus[tid] == Idle) { |
| DPRINTF(IEW, "[tid:%i] Not blocked, so attempting to run " |
| "dispatch.\n", tid); |
| |
| dispatchInsts(tid); |
| } else if (dispatchStatus[tid] == Unblocking) { |
| // Make sure that the skid buffer has something in it if the |
| // status is unblocking. |
| assert(!skidsEmpty()); |
| |
| // If the status was unblocking, then instructions from the skid |
| // buffer were used. Remove those instructions and handle |
| // the rest of unblocking. |
| dispatchInsts(tid); |
| |
| ++iewUnblockCycles; |
| |
| if (validInstsFromRename()) { |
| // Add the current inputs to the skid buffer so they can be |
| // reprocessed when this stage unblocks. |
| skidInsert(tid); |
| } |
| |
| unblock(tid); |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::dispatchInsts(ThreadID tid) |
| { |
| // Obtain instructions from skid buffer if unblocking, or queue from rename |
| // otherwise. |
| std::queue<DynInstPtr> &insts_to_dispatch = |
| dispatchStatus[tid] == Unblocking ? |
| skidBuffer[tid] : insts[tid]; |
| |
| int insts_to_add = insts_to_dispatch.size(); |
| |
| DynInstPtr inst; |
| bool add_to_iq = false; |
| int dis_num_inst = 0; |
| |
| // Loop through the instructions, putting them in the instruction |
| // queue. |
| for ( ; dis_num_inst < insts_to_add && |
| dis_num_inst < dispatchWidth; |
| ++dis_num_inst) |
| { |
| inst = insts_to_dispatch.front(); |
| |
| if (dispatchStatus[tid] == Unblocking) { |
| DPRINTF(IEW, "[tid:%i]: Issue: Examining instruction from skid " |
| "buffer\n", tid); |
| } |
| |
| // Make sure there's a valid instruction there. |
| assert(inst); |
| |
| DPRINTF(IEW, "[tid:%i]: Issue: Adding PC %s [sn:%lli] [tid:%i] to " |
| "IQ.\n", |
| tid, inst->pcState(), inst->seqNum, inst->threadNumber); |
| |
| // Be sure to mark these instructions as ready so that the |
| // commit stage can go ahead and execute them, and mark |
| // them as issued so the IQ doesn't reprocess them. |
| |
| // Check for squashed instructions. |
| if (inst->isSquashed()) { |
| DPRINTF(IEW, "[tid:%i]: Issue: Squashed instruction encountered, " |
| "not adding to IQ.\n", tid); |
| |
| ++iewDispSquashedInsts; |
| |
| insts_to_dispatch.pop(); |
| |
| //Tell Rename That An Instruction has been processed |
| if (inst->isLoad() || inst->isStore()) { |
| toRename->iewInfo[tid].dispatchedToLSQ++; |
| } |
| toRename->iewInfo[tid].dispatched++; |
| |
| continue; |
| } |
| |
| // Check for full conditions. |
| if (instQueue.isFull(tid)) { |
| DPRINTF(IEW, "[tid:%i]: Issue: IQ has become full.\n", tid); |
| |
| // Call function to start blocking. |
| block(tid); |
| |
| // Set unblock to false. Special case where we are using |
| // skidbuffer (unblocking) instructions but then we still |
| // get full in the IQ. |
| toRename->iewUnblock[tid] = false; |
| |
| ++iewIQFullEvents; |
| break; |
| } else if (ldstQueue.isFull(tid)) { |
| DPRINTF(IEW, "[tid:%i]: Issue: LSQ has become full.\n",tid); |
| |
| // Call function to start blocking. |
| block(tid); |
| |
| // Set unblock to false. Special case where we are using |
| // skidbuffer (unblocking) instructions but then we still |
| // get full in the IQ. |
| toRename->iewUnblock[tid] = false; |
| |
| ++iewLSQFullEvents; |
| break; |
| } |
| |
| // Otherwise issue the instruction just fine. |
| if (inst->isLoad()) { |
| DPRINTF(IEW, "[tid:%i]: Issue: Memory instruction " |
| "encountered, adding to LSQ.\n", tid); |
| |
| // Reserve a spot in the load store queue for this |
| // memory access. |
| ldstQueue.insertLoad(inst); |
| |
| ++iewDispLoadInsts; |
| |
| add_to_iq = true; |
| |
| toRename->iewInfo[tid].dispatchedToLSQ++; |
| } else if (inst->isStore()) { |
| DPRINTF(IEW, "[tid:%i]: Issue: Memory instruction " |
| "encountered, adding to LSQ.\n", tid); |
| |
| ldstQueue.insertStore(inst); |
| |
| ++iewDispStoreInsts; |
| |
| if (inst->isStoreConditional()) { |
| // Store conditionals need to be set as "canCommit()" |
| // so that commit can process them when they reach the |
| // head of commit. |
| // @todo: This is somewhat specific to Alpha. |
| inst->setCanCommit(); |
| instQueue.insertNonSpec(inst); |
| add_to_iq = false; |
| |
| ++iewDispNonSpecInsts; |
| } else { |
| add_to_iq = true; |
| } |
| |
| toRename->iewInfo[tid].dispatchedToLSQ++; |
| } else if (inst->isMemBarrier() || inst->isWriteBarrier()) { |
| // Same as non-speculative stores. |
| inst->setCanCommit(); |
| instQueue.insertBarrier(inst); |
| add_to_iq = false; |
| } else if (inst->isNop()) { |
| DPRINTF(IEW, "[tid:%i]: Issue: Nop instruction encountered, " |
| "skipping.\n", tid); |
| |
| inst->setIssued(); |
| inst->setExecuted(); |
| inst->setCanCommit(); |
| |
| instQueue.recordProducer(inst); |
| |
| iewExecutedNop[tid]++; |
| |
| add_to_iq = false; |
| } else if (inst->isExecuted()) { |
| assert(0 && "Instruction shouldn't be executed.\n"); |
| DPRINTF(IEW, "Issue: Executed branch encountered, " |
| "skipping.\n"); |
| |
| inst->setIssued(); |
| inst->setCanCommit(); |
| |
| instQueue.recordProducer(inst); |
| |
| add_to_iq = false; |
| } else { |
| add_to_iq = true; |
| } |
| if (inst->isNonSpeculative()) { |
| DPRINTF(IEW, "[tid:%i]: Issue: Nonspeculative instruction " |
| "encountered, skipping.\n", tid); |
| |
| // Same as non-speculative stores. |
| inst->setCanCommit(); |
| |
| // Specifically insert it as nonspeculative. |
| instQueue.insertNonSpec(inst); |
| |
| ++iewDispNonSpecInsts; |
| |
| add_to_iq = false; |
| } |
| |
| // If the instruction queue is not full, then add the |
| // instruction. |
| if (add_to_iq) { |
| instQueue.insert(inst); |
| } |
| |
| insts_to_dispatch.pop(); |
| |
| toRename->iewInfo[tid].dispatched++; |
| |
| ++iewDispatchedInsts; |
| |
| #if TRACING_ON |
| inst->dispatchTick = curTick() - inst->fetchTick; |
| #endif |
| } |
| |
| if (!insts_to_dispatch.empty()) { |
| DPRINTF(IEW,"[tid:%i]: Issue: Bandwidth Full. Blocking.\n", tid); |
| block(tid); |
| toRename->iewUnblock[tid] = false; |
| } |
| |
| if (dispatchStatus[tid] == Idle && dis_num_inst) { |
| dispatchStatus[tid] = Running; |
| |
| updatedQueues = true; |
| } |
| |
| dis_num_inst = 0; |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::printAvailableInsts() |
| { |
| int inst = 0; |
| |
| std::cout << "Available Instructions: "; |
| |
| while (fromIssue->insts[inst]) { |
| |
| if (inst%3==0) std::cout << "\n\t"; |
| |
| std::cout << "PC: " << fromIssue->insts[inst]->pcState() |
| << " TN: " << fromIssue->insts[inst]->threadNumber |
| << " SN: " << fromIssue->insts[inst]->seqNum << " | "; |
| |
| inst++; |
| |
| } |
| |
| std::cout << "\n"; |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::executeInsts() |
| { |
| wbNumInst = 0; |
| wbCycle = 0; |
| |
| list<ThreadID>::iterator threads = activeThreads->begin(); |
| list<ThreadID>::iterator end = activeThreads->end(); |
| |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| fetchRedirect[tid] = false; |
| } |
| |
| // Uncomment this if you want to see all available instructions. |
| // @todo This doesn't actually work anymore, we should fix it. |
| // printAvailableInsts(); |
| |
| // Execute/writeback any instructions that are available. |
| int insts_to_execute = fromIssue->size; |
| int inst_num = 0; |
| for (; inst_num < insts_to_execute; |
| ++inst_num) { |
| |
| DPRINTF(IEW, "Execute: Executing instructions from IQ.\n"); |
| |
| DynInstPtr inst = instQueue.getInstToExecute(); |
| |
| DPRINTF(IEW, "Execute: Processing PC %s, [tid:%i] [sn:%i].\n", |
| inst->pcState(), inst->threadNumber,inst->seqNum); |
| |
| // Check if the instruction is squashed; if so then skip it |
| if (inst->isSquashed()) { |
| DPRINTF(IEW, "Execute: Instruction was squashed. PC: %s, [tid:%i]" |
| " [sn:%i]\n", inst->pcState(), inst->threadNumber, |
| inst->seqNum); |
| |
| // Consider this instruction executed so that commit can go |
| // ahead and retire the instruction. |
| inst->setExecuted(); |
| |
| // Not sure if I should set this here or just let commit try to |
| // commit any squashed instructions. I like the latter a bit more. |
| inst->setCanCommit(); |
| |
| ++iewExecSquashedInsts; |
| |
| decrWb(inst->seqNum); |
| continue; |
| } |
| |
| Fault fault = NoFault; |
| |
| // Execute instruction. |
| // Note that if the instruction faults, it will be handled |
| // at the commit stage. |
| if (inst->isMemRef()) { |
| DPRINTF(IEW, "Execute: Calculating address for memory " |
| "reference.\n"); |
| |
| // Tell the LDSTQ to execute this instruction (if it is a load). |
| if (inst->isLoad()) { |
| // Loads will mark themselves as executed, and their writeback |
| // event adds the instruction to the queue to commit |
| fault = ldstQueue.executeLoad(inst); |
| |
| if (inst->isTranslationDelayed() && |
| fault == NoFault) { |
| // A hw page table walk is currently going on; the |
| // instruction must be deferred. |
| DPRINTF(IEW, "Execute: Delayed translation, deferring " |
| "load.\n"); |
| instQueue.deferMemInst(inst); |
| continue; |
| } |
| |
| if (inst->isDataPrefetch() || inst->isInstPrefetch()) { |
| inst->fault = NoFault; |
| } |
| } else if (inst->isStore()) { |
| fault = ldstQueue.executeStore(inst); |
| |
| if (inst->isTranslationDelayed() && |
| fault == NoFault) { |
| // A hw page table walk is currently going on; the |
| // instruction must be deferred. |
| DPRINTF(IEW, "Execute: Delayed translation, deferring " |
| "store.\n"); |
| instQueue.deferMemInst(inst); |
| continue; |
| } |
| |
| // If the store had a fault then it may not have a mem req |
| if (fault != NoFault || inst->readPredicate() == false || |
| !inst->isStoreConditional()) { |
| // If the instruction faulted, then we need to send it along |
| // to commit without the instruction completing. |
| // Send this instruction to commit, also make sure iew stage |
| // realizes there is activity. |
| inst->setExecuted(); |
| instToCommit(inst); |
| activityThisCycle(); |
| } |
| |
| // Store conditionals will mark themselves as |
| // executed, and their writeback event will add the |
| // instruction to the queue to commit. |
| } else { |
| panic("Unexpected memory type!\n"); |
| } |
| |
| } else { |
| // If the instruction has already faulted, then skip executing it. |
| // Such case can happen when it faulted during ITLB translation. |
| // If we execute the instruction (even if it's a nop) the fault |
| // will be replaced and we will lose it. |
| if (inst->getFault() == NoFault) { |
| inst->execute(); |
| if (inst->readPredicate() == false) |
| inst->forwardOldRegs(); |
| } |
| |
| inst->setExecuted(); |
| |
| instToCommit(inst); |
| } |
| |
| updateExeInstStats(inst); |
| |
| // Check if branch prediction was correct, if not then we need |
| // to tell commit to squash in flight instructions. Only |
| // handle this if there hasn't already been something that |
| // redirects fetch in this group of instructions. |
| |
| // This probably needs to prioritize the redirects if a different |
| // scheduler is used. Currently the scheduler schedules the oldest |
| // instruction first, so the branch resolution order will be correct. |
| ThreadID tid = inst->threadNumber; |
| |
| if (!fetchRedirect[tid] || |
| !toCommit->squash[tid] || |
| toCommit->squashedSeqNum[tid] > inst->seqNum) { |
| |
| // Prevent testing for misprediction on load instructions, |
| // that have not been executed. |
| bool loadNotExecuted = !inst->isExecuted() && inst->isLoad(); |
| |
| if (inst->mispredicted() && !loadNotExecuted) { |
| fetchRedirect[tid] = true; |
| |
| DPRINTF(IEW, "Execute: Branch mispredict detected.\n"); |
| DPRINTF(IEW, "Predicted target was PC: %s.\n", |
| inst->readPredTarg()); |
| DPRINTF(IEW, "Execute: Redirecting fetch to PC: %s.\n", |
| inst->pcState()); |
| // If incorrect, then signal the ROB that it must be squashed. |
| squashDueToBranch(inst, tid); |
| |
| if (inst->readPredTaken()) { |
| predictedTakenIncorrect++; |
| } else { |
| predictedNotTakenIncorrect++; |
| } |
| } else if (ldstQueue.violation(tid)) { |
| assert(inst->isMemRef()); |
| // If there was an ordering violation, then get the |
| // DynInst that caused the violation. Note that this |
| // clears the violation signal. |
| DynInstPtr violator; |
| violator = ldstQueue.getMemDepViolator(tid); |
| |
| DPRINTF(IEW, "LDSTQ detected a violation. Violator PC: %s " |
| "[sn:%lli], inst PC: %s [sn:%lli]. Addr is: %#x.\n", |
| violator->pcState(), violator->seqNum, |
| inst->pcState(), inst->seqNum, inst->physEffAddr); |
| |
| fetchRedirect[tid] = true; |
| |
| // Tell the instruction queue that a violation has occured. |
| instQueue.violation(inst, violator); |
| |
| // Squash. |
| squashDueToMemOrder(violator, tid); |
| |
| ++memOrderViolationEvents; |
| } else if (ldstQueue.loadBlocked(tid) && |
| !ldstQueue.isLoadBlockedHandled(tid)) { |
| fetchRedirect[tid] = true; |
| |
| DPRINTF(IEW, "Load operation couldn't execute because the " |
| "memory system is blocked. PC: %s [sn:%lli]\n", |
| inst->pcState(), inst->seqNum); |
| |
| squashDueToMemBlocked(inst, tid); |
| } |
| } else { |
| // Reset any state associated with redirects that will not |
| // be used. |
| if (ldstQueue.violation(tid)) { |
| assert(inst->isMemRef()); |
| |
| DynInstPtr violator = ldstQueue.getMemDepViolator(tid); |
| |
| DPRINTF(IEW, "LDSTQ detected a violation. Violator PC: " |
| "%s, inst PC: %s. Addr is: %#x.\n", |
| violator->pcState(), inst->pcState(), |
| inst->physEffAddr); |
| DPRINTF(IEW, "Violation will not be handled because " |
| "already squashing\n"); |
| |
| ++memOrderViolationEvents; |
| } |
| if (ldstQueue.loadBlocked(tid) && |
| !ldstQueue.isLoadBlockedHandled(tid)) { |
| DPRINTF(IEW, "Load operation couldn't execute because the " |
| "memory system is blocked. PC: %s [sn:%lli]\n", |
| inst->pcState(), inst->seqNum); |
| DPRINTF(IEW, "Blocked load will not be handled because " |
| "already squashing\n"); |
| |
| ldstQueue.setLoadBlockedHandled(tid); |
| } |
| |
| } |
| } |
| |
| // Update and record activity if we processed any instructions. |
| if (inst_num) { |
| if (exeStatus == Idle) { |
| exeStatus = Running; |
| } |
| |
| updatedQueues = true; |
| |
| cpu->activityThisCycle(); |
| } |
| |
| // Need to reset this in case a writeback event needs to write into the |
| // iew queue. That way the writeback event will write into the correct |
| // spot in the queue. |
| wbNumInst = 0; |
| |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::writebackInsts() |
| { |
| // Loop through the head of the time buffer and wake any |
| // dependents. These instructions are about to write back. Also |
| // mark scoreboard that this instruction is finally complete. |
| // Either have IEW have direct access to scoreboard, or have this |
| // as part of backwards communication. |
| for (int inst_num = 0; inst_num < wbWidth && |
| toCommit->insts[inst_num]; inst_num++) { |
| DynInstPtr inst = toCommit->insts[inst_num]; |
| ThreadID tid = inst->threadNumber; |
| |
| DPRINTF(IEW, "Sending instructions to commit, [sn:%lli] PC %s.\n", |
| inst->seqNum, inst->pcState()); |
| |
| iewInstsToCommit[tid]++; |
| |
| // Some instructions will be sent to commit without having |
| // executed because they need commit to handle them. |
| // E.g. Uncached loads have not actually executed when they |
| // are first sent to commit. Instead commit must tell the LSQ |
| // when it's ready to execute the uncached load. |
| if (!inst->isSquashed() && inst->isExecuted() && inst->getFault() == NoFault) { |
| int dependents = instQueue.wakeDependents(inst); |
| |
| for (int i = 0; i < inst->numDestRegs(); i++) { |
| //mark as Ready |
| DPRINTF(IEW,"Setting Destination Register %i\n", |
| inst->renamedDestRegIdx(i)); |
| scoreboard->setReg(inst->renamedDestRegIdx(i)); |
| } |
| |
| if (dependents) { |
| producerInst[tid]++; |
| consumerInst[tid]+= dependents; |
| } |
| writebackCount[tid]++; |
| } |
| |
| decrWb(inst->seqNum); |
| } |
| } |
| |
| template<class Impl> |
| void |
| DefaultIEW<Impl>::tick() |
| { |
| wbNumInst = 0; |
| wbCycle = 0; |
| |
| wroteToTimeBuffer = false; |
| updatedQueues = false; |
| |
| sortInsts(); |
| |
| // Free function units marked as being freed this cycle. |
| fuPool->processFreeUnits(); |
| |
| list<ThreadID>::iterator threads = activeThreads->begin(); |
| list<ThreadID>::iterator end = activeThreads->end(); |
| |
| // Check stall and squash signals, dispatch any instructions. |
| while (threads != end) { |
| ThreadID tid = *threads++; |
| |
| DPRINTF(IEW,"Issue: Processing [tid:%i]\n",tid); |
| |
| checkSignalsAndUpdate(tid); |
| dispatch(tid); |
| } |
| |
| if (exeStatus != Squashing) { |
| executeInsts(); |
| |
| writebackInsts(); |
| |
| // Have the instruction queue try to schedule any ready instructions. |
| // (In actuality, this scheduling is for instructions that will |
| // be executed next cycle.) |
| instQueue.scheduleReadyInsts(); |
| |
| // Also should advance its own time buffers if the stage ran. |
| // Not the best place for it, but this works (hopefully). |
| issueToExecQueue.advance(); |
| } |
| |
| bool broadcast_free_entries = false; |
| |
| if (updatedQueues || exeStatus == Running || updateLSQNextCycle) { |
| exeStatus = Idle; |
| updateLSQNextCycle = false; |
| |
| broadcast_free_entries = true; |
| } |
| |
| // Writeback any stores using any leftover bandwidth. |
| ldstQueue.writebackStores(); |
| |
| // Check the committed load/store signals to see if there's a load |
| // or store to commit. Also check if it's being told to execute a |
| // nonspeculative instruction. |
| // This is pretty inefficient... |
| |
| threads = activeThreads->begin(); |
| while (threads != end) { |
| ThreadID tid = (*threads++); |
| |
| DPRINTF(IEW,"Processing [tid:%i]\n",tid); |
| |
| // Update structures based on instructions committed. |
| if (fromCommit->commitInfo[tid].doneSeqNum != 0 && |
| !fromCommit->commitInfo[tid].squash && |
| !fromCommit->commitInfo[tid].robSquashing) { |
| |
| ldstQueue.commitStores(fromCommit->commitInfo[tid].doneSeqNum,tid); |
| |
| ldstQueue.commitLoads(fromCommit->commitInfo[tid].doneSeqNum,tid); |
| |
| updateLSQNextCycle = true; |
| instQueue.commit(fromCommit->commitInfo[tid].doneSeqNum,tid); |
| } |
| |
| if (fromCommit->commitInfo[tid].nonSpecSeqNum != 0) { |
| |
| //DPRINTF(IEW,"NonspecInst from thread %i",tid); |
| if (fromCommit->commitInfo[tid].uncached) { |
| instQueue.replayMemInst(fromCommit->commitInfo[tid].uncachedLoad); |
| fromCommit->commitInfo[tid].uncachedLoad->setAtCommit(); |
| } else { |
| instQueue.scheduleNonSpec( |
| fromCommit->commitInfo[tid].nonSpecSeqNum); |
| } |
| } |
| |
| if (broadcast_free_entries) { |
| toFetch->iewInfo[tid].iqCount = |
| instQueue.getCount(tid); |
| toFetch->iewInfo[tid].ldstqCount = |
| ldstQueue.getCount(tid); |
| |
| toRename->iewInfo[tid].usedIQ = true; |
| toRename->iewInfo[tid].freeIQEntries = |
| instQueue.numFreeEntries(); |
| toRename->iewInfo[tid].usedLSQ = true; |
| toRename->iewInfo[tid].freeLSQEntries = |
| ldstQueue.numFreeEntries(tid); |
| |
| wroteToTimeBuffer = true; |
| } |
| |
| DPRINTF(IEW, "[tid:%i], Dispatch dispatched %i instructions.\n", |
| tid, toRename->iewInfo[tid].dispatched); |
| } |
| |
| DPRINTF(IEW, "IQ has %i free entries (Can schedule: %i). " |
| "LSQ has %i free entries.\n", |
| instQueue.numFreeEntries(), instQueue.hasReadyInsts(), |
| ldstQueue.numFreeEntries()); |
| |
| updateStatus(); |
| |
| if (wroteToTimeBuffer) { |
| DPRINTF(Activity, "Activity this cycle.\n"); |
| cpu->activityThisCycle(); |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::updateExeInstStats(DynInstPtr &inst) |
| { |
| ThreadID tid = inst->threadNumber; |
| |
| iewExecutedInsts++; |
| |
| #if TRACING_ON |
| if (DTRACE(O3PipeView)) { |
| inst->completeTick = curTick() - inst->fetchTick; |
| } |
| #endif |
| |
| // |
| // Control operations |
| // |
| if (inst->isControl()) |
| iewExecutedBranches[tid]++; |
| |
| // |
| // Memory operations |
| // |
| if (inst->isMemRef()) { |
| iewExecutedRefs[tid]++; |
| |
| if (inst->isLoad()) { |
| iewExecLoadInsts[tid]++; |
| } |
| } |
| } |
| |
| template <class Impl> |
| void |
| DefaultIEW<Impl>::checkMisprediction(DynInstPtr &inst) |
| { |
| ThreadID tid = inst->threadNumber; |
| |
| if (!fetchRedirect[tid] || |
| !toCommit->squash[tid] || |
| toCommit->squashedSeqNum[tid] > inst->seqNum) { |
| |
| if (inst->mispredicted()) { |
| fetchRedirect[tid] = true; |
| |
| DPRINTF(IEW, "Execute: Branch mispredict detected.\n"); |
| DPRINTF(IEW, "Predicted target was PC:%#x, NPC:%#x.\n", |
| inst->predInstAddr(), inst->predNextInstAddr()); |
| DPRINTF(IEW, "Execute: Redirecting fetch to PC: %#x," |
| " NPC: %#x.\n", inst->nextInstAddr(), |
| inst->nextInstAddr()); |
| // If incorrect, then signal the ROB that it must be squashed. |
| squashDueToBranch(inst, tid); |
| |
| if (inst->readPredTaken()) { |
| predictedTakenIncorrect++; |
| } else { |
| predictedNotTakenIncorrect++; |
| } |
| } |
| } |
| } |