| /* |
| * Copyright (c) 2008 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Gabe Black |
| */ |
| |
| #include "dev/x86/i8042.hh" |
| |
| #include "base/bitunion.hh" |
| #include "debug/I8042.hh" |
| #include "mem/packet.hh" |
| #include "mem/packet_access.hh" |
| |
| // The 8042 has a whopping 32 bytes of internal RAM. |
| const uint8_t RamSize = 32; |
| const uint8_t NumOutputBits = 14; |
| const uint8_t X86ISA::PS2Keyboard::ID[] = {0xab, 0x83}; |
| const uint8_t X86ISA::PS2Mouse::ID[] = {0x00}; |
| const uint8_t CommandAck = 0xfa; |
| const uint8_t CommandNack = 0xfe; |
| const uint8_t BatSuccessful = 0xaa; |
| |
| |
| X86ISA::I8042::I8042(Params *p) |
| : BasicPioDevice(p, 0), // pioSize arg is dummy value... not used |
| latency(p->pio_latency), |
| dataPort(p->data_port), commandPort(p->command_port), |
| statusReg(0), commandByte(0), dataReg(0), lastCommand(NoCommand), |
| mouseIntPin(p->mouse_int_pin), keyboardIntPin(p->keyboard_int_pin) |
| { |
| statusReg.passedSelfTest = 1; |
| statusReg.commandLast = 1; |
| statusReg.keyboardUnlocked = 1; |
| |
| commandByte.convertScanCodes = 1; |
| commandByte.passedSelfTest = 1; |
| commandByte.keyboardFullInt = 1; |
| } |
| |
| |
| AddrRangeList |
| X86ISA::I8042::getAddrRanges() const |
| { |
| AddrRangeList ranges; |
| // TODO: Are these really supposed to be a single byte and not 4? |
| ranges.push_back(RangeSize(dataPort, 1)); |
| ranges.push_back(RangeSize(commandPort, 1)); |
| return ranges; |
| } |
| |
| void |
| X86ISA::I8042::writeData(uint8_t newData, bool mouse) |
| { |
| DPRINTF(I8042, "Set data %#02x.\n", newData); |
| dataReg = newData; |
| statusReg.outputFull = 1; |
| statusReg.mouseOutputFull = (mouse ? 1 : 0); |
| if (!mouse && commandByte.keyboardFullInt) { |
| DPRINTF(I8042, "Sending keyboard interrupt.\n"); |
| keyboardIntPin->raise(); |
| //This is a hack |
| keyboardIntPin->lower(); |
| } else if (mouse && commandByte.mouseFullInt) { |
| DPRINTF(I8042, "Sending mouse interrupt.\n"); |
| mouseIntPin->raise(); |
| //This is a hack |
| mouseIntPin->lower(); |
| } |
| } |
| |
| void |
| X86ISA::PS2Device::serialize(const std::string &base, CheckpointOut &cp) const |
| { |
| paramOut(cp, base + ".lastCommand", lastCommand); |
| |
| std::vector<uint8_t> buffer(outBuffer.size()); |
| std::copy(outBuffer.begin(), outBuffer.end(), buffer.begin()); |
| arrayParamOut(cp, base + ".outBuffer.elts", buffer); |
| } |
| |
| void |
| X86ISA::PS2Device::unserialize(const std::string &base, CheckpointIn &cp) |
| { |
| paramIn(cp, base + ".lastCommand", lastCommand); |
| |
| std::vector<uint8_t> buffer; |
| arrayParamIn(cp, base + ".outBuffer.elts", buffer); |
| assert(outBuffer.empty()); |
| for (auto c : buffer) |
| outBuffer.push_back(c); |
| } |
| |
| |
| void |
| X86ISA::PS2Device::ack() |
| { |
| bufferData(&CommandAck, sizeof(CommandAck)); |
| } |
| |
| void |
| X86ISA::PS2Device::nack() |
| { |
| bufferData(&CommandNack, sizeof(CommandNack)); |
| } |
| |
| void |
| X86ISA::PS2Device::bufferData(const uint8_t *data, int size) |
| { |
| assert(data || size == 0); |
| while (size) { |
| outBuffer.push_back(*(data++)); |
| size--; |
| } |
| } |
| |
| uint8_t |
| X86ISA::I8042::readDataOut() |
| { |
| uint8_t data = dataReg; |
| statusReg.outputFull = 0; |
| statusReg.mouseOutputFull = 0; |
| if (keyboard.hasData()) { |
| writeData(keyboard.getData(), false); |
| } else if (mouse.hasData()) { |
| writeData(mouse.getData(), true); |
| } |
| return data; |
| } |
| |
| bool |
| X86ISA::PS2Keyboard::processData(uint8_t data) |
| { |
| if (lastCommand != NoCommand) { |
| switch (lastCommand) { |
| case LEDWrite: |
| DPRINTF(I8042, "Setting LEDs: " |
| "caps lock %s, num lock %s, scroll lock %s\n", |
| bits(data, 2) ? "on" : "off", |
| bits(data, 1) ? "on" : "off", |
| bits(data, 0) ? "on" : "off"); |
| ack(); |
| lastCommand = NoCommand; |
| break; |
| case TypematicInfo: |
| DPRINTF(I8042, "Setting typematic info to %#02x.\n", data); |
| ack(); |
| lastCommand = NoCommand; |
| break; |
| } |
| return hasData(); |
| } |
| switch (data) { |
| case LEDWrite: |
| DPRINTF(I8042, "Got LED write command.\n"); |
| ack(); |
| lastCommand = LEDWrite; |
| break; |
| case DiagnosticEcho: |
| panic("Keyboard diagnostic echo unimplemented.\n"); |
| case AlternateScanCodes: |
| panic("Accessing alternate scan codes unimplemented.\n"); |
| case ReadID: |
| DPRINTF(I8042, "Got keyboard read ID command.\n"); |
| ack(); |
| bufferData((uint8_t *)&ID, sizeof(ID)); |
| break; |
| case TypematicInfo: |
| DPRINTF(I8042, "Setting typematic info.\n"); |
| ack(); |
| lastCommand = TypematicInfo; |
| break; |
| case Enable: |
| DPRINTF(I8042, "Enabling the keyboard.\n"); |
| ack(); |
| break; |
| case Disable: |
| DPRINTF(I8042, "Disabling the keyboard.\n"); |
| ack(); |
| break; |
| case DefaultsAndDisable: |
| DPRINTF(I8042, "Disabling and resetting the keyboard.\n"); |
| ack(); |
| break; |
| case AllKeysToTypematic: |
| panic("Setting all keys to typemantic unimplemented.\n"); |
| case AllKeysToMakeRelease: |
| panic("Setting all keys to make/release unimplemented.\n"); |
| case AllKeysToMake: |
| panic("Setting all keys to make unimplemented.\n"); |
| case AllKeysToTypematicMakeRelease: |
| panic("Setting all keys to " |
| "typematic/make/release unimplemented.\n"); |
| case KeyToTypematic: |
| panic("Setting a key to typematic unimplemented.\n"); |
| case KeyToMakeRelease: |
| panic("Setting a key to make/release unimplemented.\n"); |
| case KeyToMakeOnly: |
| panic("Setting key to make only unimplemented.\n"); |
| case Resend: |
| panic("Keyboard resend unimplemented.\n"); |
| case Reset: |
| panic("Keyboard reset unimplemented.\n"); |
| default: |
| panic("Unknown keyboard command %#02x.\n", data); |
| } |
| return hasData(); |
| } |
| |
| bool |
| X86ISA::PS2Mouse::processData(uint8_t data) |
| { |
| if (lastCommand != NoCommand) { |
| switch(lastCommand) { |
| case SetResolution: |
| DPRINTF(I8042, "Mouse resolution set to %d.\n", data); |
| resolution = data; |
| ack(); |
| lastCommand = NoCommand; |
| break; |
| case SampleRate: |
| DPRINTF(I8042, "Mouse sample rate %d samples " |
| "per second.\n", data); |
| sampleRate = data; |
| ack(); |
| lastCommand = NoCommand; |
| break; |
| default: |
| panic("Not expecting data for a mouse command.\n"); |
| } |
| return hasData(); |
| } |
| switch (data) { |
| case Scale1to1: |
| DPRINTF(I8042, "Setting mouse scale to 1:1.\n"); |
| status.twoToOne = 0; |
| ack(); |
| break; |
| case Scale2to1: |
| DPRINTF(I8042, "Setting mouse scale to 2:1.\n"); |
| status.twoToOne = 1; |
| ack(); |
| break; |
| case SetResolution: |
| DPRINTF(I8042, "Setting mouse resolution.\n"); |
| lastCommand = SetResolution; |
| ack(); |
| break; |
| case GetStatus: |
| DPRINTF(I8042, "Getting mouse status.\n"); |
| ack(); |
| bufferData((uint8_t *)&(status), 1); |
| bufferData(&resolution, sizeof(resolution)); |
| bufferData(&sampleRate, sizeof(sampleRate)); |
| break; |
| case ReadData: |
| panic("Reading mouse data unimplemented.\n"); |
| case ResetWrapMode: |
| panic("Resetting mouse wrap mode unimplemented.\n"); |
| case WrapMode: |
| panic("Setting mouse wrap mode unimplemented.\n"); |
| case RemoteMode: |
| panic("Setting mouse remote mode unimplemented.\n"); |
| case ReadID: |
| DPRINTF(I8042, "Mouse ID requested.\n"); |
| ack(); |
| bufferData(ID, sizeof(ID)); |
| break; |
| case SampleRate: |
| DPRINTF(I8042, "Setting mouse sample rate.\n"); |
| lastCommand = SampleRate; |
| ack(); |
| break; |
| case DisableReporting: |
| DPRINTF(I8042, "Disabling data reporting.\n"); |
| status.enabled = 0; |
| ack(); |
| break; |
| case EnableReporting: |
| DPRINTF(I8042, "Enabling data reporting.\n"); |
| status.enabled = 1; |
| ack(); |
| break; |
| case DefaultsAndDisable: |
| DPRINTF(I8042, "Disabling and resetting mouse.\n"); |
| sampleRate = 100; |
| resolution = 4; |
| status.twoToOne = 0; |
| status.enabled = 0; |
| ack(); |
| break; |
| case Resend: |
| panic("Mouse resend unimplemented.\n"); |
| case Reset: |
| DPRINTF(I8042, "Resetting the mouse.\n"); |
| sampleRate = 100; |
| resolution = 4; |
| status.twoToOne = 0; |
| status.enabled = 0; |
| ack(); |
| bufferData(&BatSuccessful, sizeof(BatSuccessful)); |
| bufferData(ID, sizeof(ID)); |
| break; |
| default: |
| warn("Unknown mouse command %#02x.\n", data); |
| nack(); |
| break; |
| } |
| return hasData(); |
| } |
| |
| |
| Tick |
| X86ISA::I8042::read(PacketPtr pkt) |
| { |
| assert(pkt->getSize() == 1); |
| Addr addr = pkt->getAddr(); |
| if (addr == dataPort) { |
| uint8_t data = readDataOut(); |
| //DPRINTF(I8042, "Read from data port got %#02x.\n", data); |
| pkt->set<uint8_t>(data); |
| } else if (addr == commandPort) { |
| //DPRINTF(I8042, "Read status as %#02x.\n", (uint8_t)statusReg); |
| pkt->set<uint8_t>((uint8_t)statusReg); |
| } else { |
| panic("Read from unrecognized port %#x.\n", addr); |
| } |
| pkt->makeAtomicResponse(); |
| return latency; |
| } |
| |
| Tick |
| X86ISA::I8042::write(PacketPtr pkt) |
| { |
| assert(pkt->getSize() == 1); |
| Addr addr = pkt->getAddr(); |
| uint8_t data = pkt->get<uint8_t>(); |
| if (addr == dataPort) { |
| statusReg.commandLast = 0; |
| switch (lastCommand) { |
| case NoCommand: |
| if (keyboard.processData(data)) { |
| writeData(keyboard.getData(), false); |
| } |
| break; |
| case WriteToMouse: |
| if (mouse.processData(data)) { |
| writeData(mouse.getData(), true); |
| } |
| break; |
| case WriteCommandByte: |
| commandByte = data; |
| DPRINTF(I8042, "Got data %#02x for \"Write " |
| "command byte\" command.\n", data); |
| statusReg.passedSelfTest = (uint8_t)commandByte.passedSelfTest; |
| break; |
| case WriteMouseOutputBuff: |
| DPRINTF(I8042, "Got data %#02x for \"Write " |
| "mouse output buffer\" command.\n", data); |
| writeData(data, true); |
| break; |
| default: |
| panic("Data written for unrecognized " |
| "command %#02x\n", lastCommand); |
| } |
| lastCommand = NoCommand; |
| } else if (addr == commandPort) { |
| DPRINTF(I8042, "Got command %#02x.\n", data); |
| statusReg.commandLast = 1; |
| // These purposefully leave off the first byte of the controller RAM |
| // so it can be handled specially. |
| if (data > ReadControllerRamBase && |
| data < ReadControllerRamBase + RamSize) { |
| panic("Attempted to use i8042 read controller RAM command to " |
| "get byte %d.\n", data - ReadControllerRamBase); |
| } else if (data > WriteControllerRamBase && |
| data < WriteControllerRamBase + RamSize) { |
| panic("Attempted to use i8042 read controller RAM command to " |
| "get byte %d.\n", data - ReadControllerRamBase); |
| } else if (data >= PulseOutputBitBase && |
| data < PulseOutputBitBase + NumOutputBits) { |
| panic("Attempted to use i8042 pulse output bit command to " |
| "to pulse bit %d.\n", data - PulseOutputBitBase); |
| } |
| switch (data) { |
| case GetCommandByte: |
| DPRINTF(I8042, "Getting command byte.\n"); |
| writeData(commandByte); |
| break; |
| case WriteCommandByte: |
| DPRINTF(I8042, "Setting command byte.\n"); |
| lastCommand = WriteCommandByte; |
| break; |
| case CheckForPassword: |
| panic("i8042 \"Check for password\" command not implemented.\n"); |
| case LoadPassword: |
| panic("i8042 \"Load password\" command not implemented.\n"); |
| case CheckPassword: |
| panic("i8042 \"Check password\" command not implemented.\n"); |
| case DisableMouse: |
| DPRINTF(I8042, "Disabling mouse at controller.\n"); |
| commandByte.disableMouse = 1; |
| break; |
| case EnableMouse: |
| DPRINTF(I8042, "Enabling mouse at controller.\n"); |
| commandByte.disableMouse = 0; |
| break; |
| case TestMouse: |
| panic("i8042 \"Test mouse\" command not implemented.\n"); |
| case SelfTest: |
| panic("i8042 \"Self test\" command not implemented.\n"); |
| case InterfaceTest: |
| panic("i8042 \"Interface test\" command not implemented.\n"); |
| case DiagnosticDump: |
| panic("i8042 \"Diagnostic dump\" command not implemented.\n"); |
| case DisableKeyboard: |
| DPRINTF(I8042, "Disabling keyboard at controller.\n"); |
| commandByte.disableKeyboard = 1; |
| break; |
| case EnableKeyboard: |
| DPRINTF(I8042, "Enabling keyboard at controller.\n"); |
| commandByte.disableKeyboard = 0; |
| break; |
| case ReadInputPort: |
| panic("i8042 \"Read input port\" command not implemented.\n"); |
| case ContinuousPollLow: |
| panic("i8042 \"Continuous poll low\" command not implemented.\n"); |
| case ContinuousPollHigh: |
| panic("i8042 \"Continuous poll high\" command not implemented.\n"); |
| case ReadOutputPort: |
| panic("i8042 \"Read output port\" command not implemented.\n"); |
| case WriteOutputPort: |
| warn("i8042 \"Write output port\" command not implemented.\n"); |
| lastCommand = WriteOutputPort; |
| break; |
| case WriteKeyboardOutputBuff: |
| warn("i8042 \"Write keyboard output buffer\" " |
| "command not implemented.\n"); |
| lastCommand = WriteKeyboardOutputBuff; |
| break; |
| case WriteMouseOutputBuff: |
| DPRINTF(I8042, "Got command to write to mouse output buffer.\n"); |
| lastCommand = WriteMouseOutputBuff; |
| break; |
| case WriteToMouse: |
| DPRINTF(I8042, "Expecting mouse command.\n"); |
| lastCommand = WriteToMouse; |
| break; |
| case DisableA20: |
| panic("i8042 \"Disable A20\" command not implemented.\n"); |
| case EnableA20: |
| panic("i8042 \"Enable A20\" command not implemented.\n"); |
| case ReadTestInputs: |
| panic("i8042 \"Read test inputs\" command not implemented.\n"); |
| case SystemReset: |
| panic("i8042 \"System reset\" command not implemented.\n"); |
| default: |
| warn("Write to unknown i8042 " |
| "(keyboard controller) command port.\n"); |
| } |
| } else { |
| panic("Write to unrecognized port %#x.\n", addr); |
| } |
| pkt->makeAtomicResponse(); |
| return latency; |
| } |
| |
| void |
| X86ISA::I8042::serialize(CheckpointOut &cp) const |
| { |
| SERIALIZE_SCALAR(dataPort); |
| SERIALIZE_SCALAR(commandPort); |
| SERIALIZE_SCALAR(statusReg); |
| SERIALIZE_SCALAR(commandByte); |
| SERIALIZE_SCALAR(dataReg); |
| SERIALIZE_SCALAR(lastCommand); |
| mouse.serialize("mouse", cp); |
| keyboard.serialize("keyboard", cp); |
| } |
| |
| void |
| X86ISA::I8042::unserialize(CheckpointIn &cp) |
| { |
| UNSERIALIZE_SCALAR(dataPort); |
| UNSERIALIZE_SCALAR(commandPort); |
| UNSERIALIZE_SCALAR(statusReg); |
| UNSERIALIZE_SCALAR(commandByte); |
| UNSERIALIZE_SCALAR(dataReg); |
| UNSERIALIZE_SCALAR(lastCommand); |
| mouse.unserialize("mouse", cp); |
| keyboard.unserialize("keyboard", cp); |
| } |
| |
| void |
| X86ISA::PS2Mouse::serialize(const std::string &base, CheckpointOut &cp) const |
| { |
| PS2Device::serialize(base, cp); |
| |
| paramOut(cp, base + ".status", status); |
| paramOut(cp, base + ".resolution", resolution); |
| paramOut(cp, base + ".sampleRate", sampleRate); |
| } |
| |
| void |
| X86ISA::PS2Mouse::unserialize(const std::string &base, CheckpointIn &cp) |
| { |
| PS2Device::unserialize(base, cp); |
| |
| paramIn(cp, base + ".status", status); |
| paramIn(cp, base + ".resolution", resolution); |
| paramIn(cp, base + ".sampleRate", sampleRate); |
| } |
| |
| X86ISA::I8042 * |
| I8042Params::create() |
| { |
| return new X86ISA::I8042(this); |
| } |
