drivers/mmc/host/atmel-mci-regs.h - arm/linux-arm-legacy - Git at Google

 /*
  * Atmel MultiMedia Card Interface driver
  *
  * Copyright (C) 2004-2006 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 /*
  * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
  * Registers and bitfields marked with [2] are only available in MCI2
  */

 #ifndef __DRIVERS_MMC_ATMEL_MCI_H__
 #define __DRIVERS_MMC_ATMEL_MCI_H__

 /* MCI Register Definitions */
 #define ATMCI_CR			0x0000	/* Control */
 # define ATMCI_CR_MCIEN			(  1 <<  0)	/* MCI Enable */
 # define ATMCI_CR_MCIDIS		(  1 <<  1)	/* MCI Disable */
 # define ATMCI_CR_PWSEN			(  1 <<  2)	/* Power Save Enable */
 # define ATMCI_CR_PWSDIS		(  1 <<  3)	/* Power Save Disable */
 # define ATMCI_CR_SWRST			(  1 <<  7)	/* Software Reset */
 #define ATMCI_MR			0x0004	/* Mode */
 # define ATMCI_MR_CLKDIV(x)		((x) <<  0)	/* Clock Divider */
 # define ATMCI_MR_PWSDIV(x)		((x) <<  8)	/* Power Saving Divider */
 # define ATMCI_MR_RDPROOF		(  1 << 11)	/* Read Proof */
 # define ATMCI_MR_WRPROOF		(  1 << 12)	/* Write Proof */
 # define ATMCI_MR_PDCFBYTE		(  1 << 13)	/* Force Byte Transfer */
 # define ATMCI_MR_PDCPADV		(  1 << 14)	/* Padding Value */
 # define ATMCI_MR_PDCMODE		(  1 << 15)	/* PDC-oriented Mode */
 # define ATMCI_MR_CLKODD(x)		((x) << 16)	/* LSB of Clock Divider */
 #define ATMCI_DTOR			0x0008	/* Data Timeout */
 # define ATMCI_DTOCYC(x)		((x) <<  0)	/* Data Timeout Cycles */
 # define ATMCI_DTOMUL(x)		((x) <<  4)	/* Data Timeout Multiplier */
 #define ATMCI_SDCR			0x000c	/* SD Card / SDIO */
 # define ATMCI_SDCSEL_SLOT_A		(  0 <<  0)	/* Select SD slot A */
 # define ATMCI_SDCSEL_SLOT_B		(  1 <<  0)	/* Select SD slot A */
 # define ATMCI_SDCSEL_MASK		(  3 <<  0)
 # define ATMCI_SDCBUS_1BIT		(  0 <<  6)	/* 1-bit data bus */
 # define ATMCI_SDCBUS_4BIT		(  2 <<  6)	/* 4-bit data bus */
 # define ATMCI_SDCBUS_8BIT		(  3 <<  6)	/* 8-bit data bus[2] */
 # define ATMCI_SDCBUS_MASK		(  3 <<  6)
 #define ATMCI_ARGR			0x0010	/* Command Argument */
 #define ATMCI_CMDR			0x0014	/* Command */
 # define ATMCI_CMDR_CMDNB(x)		((x) <<  0)	/* Command Opcode */
 # define ATMCI_CMDR_RSPTYP_NONE		(  0 <<  6)	/* No response */
 # define ATMCI_CMDR_RSPTYP_48BIT	(  1 <<  6)	/* 48-bit response */
 # define ATMCI_CMDR_RSPTYP_136BIT	(  2 <<  6)	/* 136-bit response */
 # define ATMCI_CMDR_SPCMD_INIT		(  1 <<  8)	/* Initialization command */
 # define ATMCI_CMDR_SPCMD_SYNC		(  2 <<  8)	/* Synchronized command */
 # define ATMCI_CMDR_SPCMD_INT		(  4 <<  8)	/* Interrupt command */
 # define ATMCI_CMDR_SPCMD_INTRESP	(  5 <<  8)	/* Interrupt response */
 # define ATMCI_CMDR_OPDCMD		(  1 << 11)	/* Open Drain */
 # define ATMCI_CMDR_MAXLAT_5CYC		(  0 << 12)	/* Max latency 5 cycles */
 # define ATMCI_CMDR_MAXLAT_64CYC	(  1 << 12)	/* Max latency 64 cycles */
 # define ATMCI_CMDR_START_XFER		(  1 << 16)	/* Start data transfer */
 # define ATMCI_CMDR_STOP_XFER		(  2 << 16)	/* Stop data transfer */
 # define ATMCI_CMDR_TRDIR_WRITE		(  0 << 18)	/* Write data */
 # define ATMCI_CMDR_TRDIR_READ		(  1 << 18)	/* Read data */
 # define ATMCI_CMDR_BLOCK		(  0 << 19)	/* Single-block transfer */
 # define ATMCI_CMDR_MULTI_BLOCK		(  1 << 19)	/* Multi-block transfer */
 # define ATMCI_CMDR_STREAM		(  2 << 19)	/* MMC Stream transfer */
 # define ATMCI_CMDR_SDIO_BYTE		(  4 << 19)	/* SDIO Byte transfer */
 # define ATMCI_CMDR_SDIO_BLOCK		(  5 << 19)	/* SDIO Block transfer */
 # define ATMCI_CMDR_SDIO_SUSPEND	(  1 << 24)	/* SDIO Suspend Command */
 # define ATMCI_CMDR_SDIO_RESUME		(  2 << 24)	/* SDIO Resume Command */
 #define ATMCI_BLKR			0x0018	/* Block */
 # define ATMCI_BCNT(x)			((x) <<  0)	/* Data Block Count */
 # define ATMCI_BLKLEN(x)		((x) << 16)	/* Data Block Length */
 #define ATMCI_CSTOR			0x001c	/* Completion Signal Timeout[2] */
 # define ATMCI_CSTOCYC(x)		((x) <<  0)	/* CST cycles */
 # define ATMCI_CSTOMUL(x)		((x) <<  4)	/* CST multiplier */
 #define ATMCI_RSPR			0x0020	/* Response 0 */
 #define ATMCI_RSPR1			0x0024	/* Response 1 */
 #define ATMCI_RSPR2			0x0028	/* Response 2 */
 #define ATMCI_RSPR3			0x002c	/* Response 3 */
 #define ATMCI_RDR			0x0030	/* Receive Data */
 #define ATMCI_TDR			0x0034	/* Transmit Data */
 #define ATMCI_SR			0x0040	/* Status */
 #define ATMCI_IER			0x0044	/* Interrupt Enable */
 #define ATMCI_IDR			0x0048	/* Interrupt Disable */
 #define ATMCI_IMR			0x004c	/* Interrupt Mask */
 # define ATMCI_CMDRDY			(  1 <<   0)	/* Command Ready */
 # define ATMCI_RXRDY			(  1 <<   1)	/* Receiver Ready */
 # define ATMCI_TXRDY			(  1 <<   2)	/* Transmitter Ready */
 # define ATMCI_BLKE			(  1 <<   3)	/* Data Block Ended */
 # define ATMCI_DTIP			(  1 <<   4)	/* Data Transfer In Progress */
 # define ATMCI_NOTBUSY			(  1 <<   5)	/* Data Not Busy */
 # define ATMCI_ENDRX			(  1 <<   6)    /* End of RX Buffer */
 # define ATMCI_ENDTX			(  1 <<   7)    /* End of TX Buffer */
 # define ATMCI_SDIOIRQA			(  1 <<   8)	/* SDIO IRQ in slot A */
 # define ATMCI_SDIOIRQB			(  1 <<   9)	/* SDIO IRQ in slot B */
 # define ATMCI_SDIOWAIT			(  1 <<  12)    /* SDIO Read Wait Operation Status */
 # define ATMCI_CSRCV			(  1 <<  13)    /* CE-ATA Completion Signal Received */
 # define ATMCI_RXBUFF			(  1 <<  14)    /* RX Buffer Full */
 # define ATMCI_TXBUFE			(  1 <<  15)    /* TX Buffer Empty */
 # define ATMCI_RINDE			(  1 <<  16)	/* Response Index Error */
 # define ATMCI_RDIRE			(  1 <<  17)	/* Response Direction Error */
 # define ATMCI_RCRCE			(  1 <<  18)	/* Response CRC Error */
 # define ATMCI_RENDE			(  1 <<  19)	/* Response End Bit Error */
 # define ATMCI_RTOE			(  1 <<  20)	/* Response Time-Out Error */
 # define ATMCI_DCRCE			(  1 <<  21)	/* Data CRC Error */
 # define ATMCI_DTOE			(  1 <<  22)	/* Data Time-Out Error */
 # define ATMCI_CSTOE			(  1 <<  23)    /* Completion Signal Time-out Error */
 # define ATMCI_BLKOVRE			(  1 <<  24)    /* DMA Block Overrun Error */
 # define ATMCI_DMADONE			(  1 <<  25)    /* DMA Transfer Done */
 # define ATMCI_FIFOEMPTY		(  1 <<  26)    /* FIFO Empty Flag */
 # define ATMCI_XFRDONE			(  1 <<  27)    /* Transfer Done Flag */
 # define ATMCI_ACKRCV			(  1 <<  28)    /* Boot Operation Acknowledge Received */
 # define ATMCI_ACKRCVE			(  1 <<  29)    /* Boot Operation Acknowledge Error */
 # define ATMCI_OVRE			(  1 <<  30)	/* RX Overrun Error */
 # define ATMCI_UNRE			(  1 <<  31)	/* TX Underrun Error */
 #define ATMCI_DMA			0x0050	/* DMA Configuration[2] */
 # define ATMCI_DMA_OFFSET(x)		((x) <<  0)	/* DMA Write Buffer Offset */
 # define ATMCI_DMA_CHKSIZE(x)		((x) <<  4)	/* DMA Channel Read and Write Chunk Size */
 # define ATMCI_DMAEN			(  1 <<  8)	/* DMA Hardware Handshaking Enable */
 #define ATMCI_CFG			0x0054	/* Configuration[2] */
 # define ATMCI_CFG_FIFOMODE_1DATA	(  1 <<  0)	/* MCI Internal FIFO control mode */
 # define ATMCI_CFG_FERRCTRL_COR		(  1 <<  4)	/* Flow Error flag reset control mode */
 # define ATMCI_CFG_HSMODE		(  1 <<  8)	/* High Speed Mode */
 # define ATMCI_CFG_LSYNC		(  1 << 12)	/* Synchronize on the last block */
 #define ATMCI_WPMR			0x00e4	/* Write Protection Mode[2] */
 # define ATMCI_WP_EN			(  1 <<  0)	/* WP Enable */
 # define ATMCI_WP_KEY			(0x4d4349 << 8)	/* WP Key */
 #define ATMCI_WPSR			0x00e8	/* Write Protection Status[2] */
 # define ATMCI_GET_WP_VS(x)		((x) & 0x0f)
 # define ATMCI_GET_WP_VSRC(x)		(((x) >> 8) & 0xffff)
 #define ATMCI_VERSION			0x00FC  /* Version */
 #define ATMCI_FIFO_APERTURE		0x0200	/* FIFO Aperture[2] */

 /* This is not including the FIFO Aperture on MCI2 */
 #define ATMCI_REGS_SIZE		0x100

 /* Register access macros */
 #define atmci_readl(port,reg)				\
 	__raw_readl((port)->regs + reg)
 #define atmci_writel(port,reg,value)			\
 	__raw_writel((value), (port)->regs + reg)

 /* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
 #ifdef CONFIG_AVR32
 #	define ATMCI_PDC_CONNECTED	0
 #else
 #	define ATMCI_PDC_CONNECTED	1
 #endif

 /*
  * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
  * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
  *
  * This can be done by finding most significant bit set.
  */
 static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
 {
 	if (maxburst > 1)
 		return fls(maxburst) - 2;
 	else
 		return 0;
 }

 #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
	/*
	* Atmel MultiMedia Card Interface driver
	*
	* Copyright (C) 2004-2006 Atmel Corporation
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	/*
	* Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
	* Registers and bitfields marked with [2] are only available in MCI2
	*/

	#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
	#define __DRIVERS_MMC_ATMEL_MCI_H__

	/* MCI Register Definitions */
	#define ATMCI_CR 0x0000 /* Control */
	# define ATMCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
	# define ATMCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
	# define ATMCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */
	# define ATMCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */
	# define ATMCI_CR_SWRST ( 1 << 7) /* Software Reset */
	#define ATMCI_MR 0x0004 /* Mode */
	# define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
	# define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */
	# define ATMCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
	# define ATMCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
	# define ATMCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */
	# define ATMCI_MR_PDCPADV ( 1 << 14) /* Padding Value */
	# define ATMCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */
	# define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */
	#define ATMCI_DTOR 0x0008 /* Data Timeout */
	# define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
	# define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
	#define ATMCI_SDCR 0x000c /* SD Card / SDIO */
	# define ATMCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */
	# define ATMCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */
	# define ATMCI_SDCSEL_MASK ( 3 << 0)
	# define ATMCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
	# define ATMCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
	# define ATMCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */
	# define ATMCI_SDCBUS_MASK ( 3 << 6)
	#define ATMCI_ARGR 0x0010 /* Command Argument */
	#define ATMCI_CMDR 0x0014 /* Command */
	# define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
	# define ATMCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */
	# define ATMCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */
	# define ATMCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */
	# define ATMCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */
	# define ATMCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */
	# define ATMCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */
	# define ATMCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */
	# define ATMCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */
	# define ATMCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */
	# define ATMCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */
	# define ATMCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */
	# define ATMCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */
	# define ATMCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */
	# define ATMCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */
	# define ATMCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */
	# define ATMCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */
	# define ATMCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */
	# define ATMCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */
	# define ATMCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */
	# define ATMCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */
	# define ATMCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */
	#define ATMCI_BLKR 0x0018 /* Block */
	# define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */
	# define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
	#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
	# define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
	# define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
	#define ATMCI_RSPR 0x0020 /* Response 0 */
	#define ATMCI_RSPR1 0x0024 /* Response 1 */
	#define ATMCI_RSPR2 0x0028 /* Response 2 */
	#define ATMCI_RSPR3 0x002c /* Response 3 */
	#define ATMCI_RDR 0x0030 /* Receive Data */
	#define ATMCI_TDR 0x0034 /* Transmit Data */
	#define ATMCI_SR 0x0040 /* Status */
	#define ATMCI_IER 0x0044 /* Interrupt Enable */
	#define ATMCI_IDR 0x0048 /* Interrupt Disable */
	#define ATMCI_IMR 0x004c /* Interrupt Mask */
	# define ATMCI_CMDRDY ( 1 << 0) /* Command Ready */
	# define ATMCI_RXRDY ( 1 << 1) /* Receiver Ready */
	# define ATMCI_TXRDY ( 1 << 2) /* Transmitter Ready */
	# define ATMCI_BLKE ( 1 << 3) /* Data Block Ended */
	# define ATMCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
	# define ATMCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
	# define ATMCI_ENDRX ( 1 << 6) /* End of RX Buffer */
	# define ATMCI_ENDTX ( 1 << 7) /* End of TX Buffer */
	# define ATMCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
	# define ATMCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
	# define ATMCI_SDIOWAIT ( 1 << 12) /* SDIO Read Wait Operation Status */
	# define ATMCI_CSRCV ( 1 << 13) /* CE-ATA Completion Signal Received */
	# define ATMCI_RXBUFF ( 1 << 14) /* RX Buffer Full */
	# define ATMCI_TXBUFE ( 1 << 15) /* TX Buffer Empty */
	# define ATMCI_RINDE ( 1 << 16) /* Response Index Error */
	# define ATMCI_RDIRE ( 1 << 17) /* Response Direction Error */
	# define ATMCI_RCRCE ( 1 << 18) /* Response CRC Error */
	# define ATMCI_RENDE ( 1 << 19) /* Response End Bit Error */
	# define ATMCI_RTOE ( 1 << 20) /* Response Time-Out Error */
	# define ATMCI_DCRCE ( 1 << 21) /* Data CRC Error */
	# define ATMCI_DTOE ( 1 << 22) /* Data Time-Out Error */
	# define ATMCI_CSTOE ( 1 << 23) /* Completion Signal Time-out Error */
	# define ATMCI_BLKOVRE ( 1 << 24) /* DMA Block Overrun Error */
	# define ATMCI_DMADONE ( 1 << 25) /* DMA Transfer Done */
	# define ATMCI_FIFOEMPTY ( 1 << 26) /* FIFO Empty Flag */
	# define ATMCI_XFRDONE ( 1 << 27) /* Transfer Done Flag */
	# define ATMCI_ACKRCV ( 1 << 28) /* Boot Operation Acknowledge Received */
	# define ATMCI_ACKRCVE ( 1 << 29) /* Boot Operation Acknowledge Error */
	# define ATMCI_OVRE ( 1 << 30) /* RX Overrun Error */
	# define ATMCI_UNRE ( 1 << 31) /* TX Underrun Error */
	#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */
	# define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */
	# define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */
	# define ATMCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */
	#define ATMCI_CFG 0x0054 /* Configuration[2] */
	# define ATMCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */
	# define ATMCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */
	# define ATMCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */
	# define ATMCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */
	#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */
	# define ATMCI_WP_EN ( 1 << 0) /* WP Enable */
	# define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */
	#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */
	# define ATMCI_GET_WP_VS(x) ((x) & 0x0f)
	# define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
	#define ATMCI_VERSION 0x00FC /* Version */
	#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */

	/* This is not including the FIFO Aperture on MCI2 */
	#define ATMCI_REGS_SIZE 0x100

	/* Register access macros */
	#define atmci_readl(port,reg) \
	__raw_readl((port)->regs + reg)
	#define atmci_writel(port,reg,value) \
	__raw_writel((value), (port)->regs + reg)

	/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
	#ifdef CONFIG_AVR32
	# define ATMCI_PDC_CONNECTED 0
	#else
	# define ATMCI_PDC_CONNECTED 1
	#endif

	/*
	* Fix sconfig's burst size according to atmel MCI. We need to convert them as:
	* 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
	*
	* This can be done by finding most significant bit set.
	*/
	static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
	{
	if (maxburst > 1)
	return fls(maxburst) - 2;
	else
	return 0;
	}

	#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */