| /* |
| * Copyright (C) 2012 Avionic Design GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/regulator/consumer.h> |
| |
| struct adc081c { |
| struct i2c_client *i2c; |
| struct regulator *ref; |
| }; |
| |
| #define REG_CONV_RES 0x00 |
| |
| static int adc081c_read_raw(struct iio_dev *iio, |
| struct iio_chan_spec const *channel, int *value, |
| int *shift, long mask) |
| { |
| struct adc081c *adc = iio_priv(iio); |
| int err; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| err = i2c_smbus_read_word_swapped(adc->i2c, REG_CONV_RES); |
| if (err < 0) |
| return err; |
| |
| *value = (err >> 4) & 0xff; |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_SCALE: |
| err = regulator_get_voltage(adc->ref); |
| if (err < 0) |
| return err; |
| |
| *value = err / 1000; |
| *shift = 8; |
| |
| return IIO_VAL_FRACTIONAL_LOG2; |
| |
| default: |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct iio_chan_spec adc081c_channel = { |
| .type = IIO_VOLTAGE, |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| }; |
| |
| static const struct iio_info adc081c_info = { |
| .read_raw = adc081c_read_raw, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static int adc081c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct iio_dev *iio; |
| struct adc081c *adc; |
| int err; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) |
| return -ENODEV; |
| |
| iio = devm_iio_device_alloc(&client->dev, sizeof(*adc)); |
| if (!iio) |
| return -ENOMEM; |
| |
| adc = iio_priv(iio); |
| adc->i2c = client; |
| |
| adc->ref = devm_regulator_get(&client->dev, "vref"); |
| if (IS_ERR(adc->ref)) |
| return PTR_ERR(adc->ref); |
| |
| err = regulator_enable(adc->ref); |
| if (err < 0) |
| return err; |
| |
| iio->dev.parent = &client->dev; |
| iio->name = dev_name(&client->dev); |
| iio->modes = INDIO_DIRECT_MODE; |
| iio->info = &adc081c_info; |
| |
| iio->channels = &adc081c_channel; |
| iio->num_channels = 1; |
| |
| err = iio_device_register(iio); |
| if (err < 0) |
| goto regulator_disable; |
| |
| i2c_set_clientdata(client, iio); |
| |
| return 0; |
| |
| regulator_disable: |
| regulator_disable(adc->ref); |
| |
| return err; |
| } |
| |
| static int adc081c_remove(struct i2c_client *client) |
| { |
| struct iio_dev *iio = i2c_get_clientdata(client); |
| struct adc081c *adc = iio_priv(iio); |
| |
| iio_device_unregister(iio); |
| regulator_disable(adc->ref); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id adc081c_id[] = { |
| { "adc081c", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adc081c_id); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id adc081c_of_match[] = { |
| { .compatible = "ti,adc081c" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, adc081c_of_match); |
| #endif |
| |
| static struct i2c_driver adc081c_driver = { |
| .driver = { |
| .name = "adc081c", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(adc081c_of_match), |
| }, |
| .probe = adc081c_probe, |
| .remove = adc081c_remove, |
| .id_table = adc081c_id, |
| }; |
| module_i2c_driver(adc081c_driver); |
| |
| MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); |
| MODULE_DESCRIPTION("Texas Instruments ADC081C021/027 driver"); |
| MODULE_LICENSE("GPL v2"); |