| /* |
| * Sony NFC Port-100 Series driver |
| * Copyright (c) 2013, Intel Corporation. |
| * |
| * Partly based/Inspired by Stephen Tiedemann's nfcpy |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <net/nfc/digital.h> |
| |
| #define VERSION "0.1" |
| |
| #define SONY_VENDOR_ID 0x054c |
| #define RCS380_PRODUCT_ID 0x06c1 |
| |
| #define PORT100_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ |
| NFC_PROTO_MIFARE_MASK | \ |
| NFC_PROTO_FELICA_MASK | \ |
| NFC_PROTO_NFC_DEP_MASK) |
| |
| #define PORT100_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \ |
| NFC_DIGITAL_DRV_CAPS_TG_CRC) |
| |
| /* Standard port100 frame definitions */ |
| #define PORT100_FRAME_HEADER_LEN (sizeof(struct port100_frame) \ |
| + 2) /* data[0] CC, data[1] SCC */ |
| #define PORT100_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ |
| |
| #define PORT100_COMM_RF_HEAD_MAX_LEN (sizeof(struct port100_tg_comm_rf_cmd)) |
| |
| /* |
| * Max extended frame payload len, excluding CC and SCC |
| * which are already in PORT100_FRAME_HEADER_LEN. |
| */ |
| #define PORT100_FRAME_MAX_PAYLOAD_LEN 1001 |
| |
| #define PORT100_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2), |
| Postamble (1) */ |
| static u8 ack_frame[PORT100_FRAME_ACK_SIZE] = { |
| 0x00, 0x00, 0xff, 0x00, 0xff, 0x00 |
| }; |
| |
| #define PORT100_FRAME_CHECKSUM(f) (f->data[le16_to_cpu(f->datalen)]) |
| #define PORT100_FRAME_POSTAMBLE(f) (f->data[le16_to_cpu(f->datalen) + 1]) |
| |
| /* start of frame */ |
| #define PORT100_FRAME_SOF 0x00FF |
| #define PORT100_FRAME_EXT 0xFFFF |
| #define PORT100_FRAME_ACK 0x00FF |
| |
| /* Port-100 command: in or out */ |
| #define PORT100_FRAME_DIRECTION(f) (f->data[0]) /* CC */ |
| #define PORT100_FRAME_DIR_OUT 0xD6 |
| #define PORT100_FRAME_DIR_IN 0xD7 |
| |
| /* Port-100 sub-command */ |
| #define PORT100_FRAME_CMD(f) (f->data[1]) /* SCC */ |
| |
| #define PORT100_CMD_GET_FIRMWARE_VERSION 0x20 |
| #define PORT100_CMD_GET_COMMAND_TYPE 0x28 |
| #define PORT100_CMD_SET_COMMAND_TYPE 0x2A |
| |
| #define PORT100_CMD_IN_SET_RF 0x00 |
| #define PORT100_CMD_IN_SET_PROTOCOL 0x02 |
| #define PORT100_CMD_IN_COMM_RF 0x04 |
| |
| #define PORT100_CMD_TG_SET_RF 0x40 |
| #define PORT100_CMD_TG_SET_PROTOCOL 0x42 |
| #define PORT100_CMD_TG_SET_RF_OFF 0x46 |
| #define PORT100_CMD_TG_COMM_RF 0x48 |
| |
| #define PORT100_CMD_SWITCH_RF 0x06 |
| |
| #define PORT100_CMD_RESPONSE(cmd) (cmd + 1) |
| |
| #define PORT100_CMD_TYPE_IS_SUPPORTED(mask, cmd_type) \ |
| ((mask) & (0x01 << (cmd_type))) |
| #define PORT100_CMD_TYPE_0 0 |
| #define PORT100_CMD_TYPE_1 1 |
| |
| #define PORT100_CMD_STATUS_OK 0x00 |
| #define PORT100_CMD_STATUS_TIMEOUT 0x80 |
| |
| #define PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK 0x01 |
| #define PORT100_MDAA_TGT_WAS_ACTIVATED_MASK 0x02 |
| |
| struct port100; |
| |
| typedef void (*port100_send_async_complete_t)(struct port100 *dev, void *arg, |
| struct sk_buff *resp); |
| |
| /** |
| * Setting sets structure for in_set_rf command |
| * |
| * @in_*_set_number: Represent the entry indexes in the port-100 RF Base Table. |
| * This table contains multiple RF setting sets required for RF |
| * communication. |
| * |
| * @in_*_comm_type: Theses fields set the communication type to be used. |
| */ |
| struct port100_in_rf_setting { |
| u8 in_send_set_number; |
| u8 in_send_comm_type; |
| u8 in_recv_set_number; |
| u8 in_recv_comm_type; |
| } __packed; |
| |
| #define PORT100_COMM_TYPE_IN_212F 0x01 |
| #define PORT100_COMM_TYPE_IN_424F 0x02 |
| #define PORT100_COMM_TYPE_IN_106A 0x03 |
| |
| static const struct port100_in_rf_setting in_rf_settings[] = { |
| [NFC_DIGITAL_RF_TECH_212F] = { |
| .in_send_set_number = 1, |
| .in_send_comm_type = PORT100_COMM_TYPE_IN_212F, |
| .in_recv_set_number = 15, |
| .in_recv_comm_type = PORT100_COMM_TYPE_IN_212F, |
| }, |
| [NFC_DIGITAL_RF_TECH_424F] = { |
| .in_send_set_number = 1, |
| .in_send_comm_type = PORT100_COMM_TYPE_IN_424F, |
| .in_recv_set_number = 15, |
| .in_recv_comm_type = PORT100_COMM_TYPE_IN_424F, |
| }, |
| [NFC_DIGITAL_RF_TECH_106A] = { |
| .in_send_set_number = 2, |
| .in_send_comm_type = PORT100_COMM_TYPE_IN_106A, |
| .in_recv_set_number = 15, |
| .in_recv_comm_type = PORT100_COMM_TYPE_IN_106A, |
| }, |
| }; |
| |
| /** |
| * Setting sets structure for tg_set_rf command |
| * |
| * @tg_set_number: Represents the entry index in the port-100 RF Base Table. |
| * This table contains multiple RF setting sets required for RF |
| * communication. this field is used for both send and receive |
| * settings. |
| * |
| * @tg_comm_type: Sets the communication type to be used to send and receive |
| * data. |
| */ |
| struct port100_tg_rf_setting { |
| u8 tg_set_number; |
| u8 tg_comm_type; |
| } __packed; |
| |
| #define PORT100_COMM_TYPE_TG_106A 0x0B |
| #define PORT100_COMM_TYPE_TG_212F 0x0C |
| #define PORT100_COMM_TYPE_TG_424F 0x0D |
| |
| static const struct port100_tg_rf_setting tg_rf_settings[] = { |
| [NFC_DIGITAL_RF_TECH_106A] = { |
| .tg_set_number = 8, |
| .tg_comm_type = PORT100_COMM_TYPE_TG_106A, |
| }, |
| [NFC_DIGITAL_RF_TECH_212F] = { |
| .tg_set_number = 8, |
| .tg_comm_type = PORT100_COMM_TYPE_TG_212F, |
| }, |
| [NFC_DIGITAL_RF_TECH_424F] = { |
| .tg_set_number = 8, |
| .tg_comm_type = PORT100_COMM_TYPE_TG_424F, |
| }, |
| }; |
| |
| #define PORT100_IN_PROT_INITIAL_GUARD_TIME 0x00 |
| #define PORT100_IN_PROT_ADD_CRC 0x01 |
| #define PORT100_IN_PROT_CHECK_CRC 0x02 |
| #define PORT100_IN_PROT_MULTI_CARD 0x03 |
| #define PORT100_IN_PROT_ADD_PARITY 0x04 |
| #define PORT100_IN_PROT_CHECK_PARITY 0x05 |
| #define PORT100_IN_PROT_BITWISE_AC_RECV_MODE 0x06 |
| #define PORT100_IN_PROT_VALID_BIT_NUMBER 0x07 |
| #define PORT100_IN_PROT_CRYPTO1 0x08 |
| #define PORT100_IN_PROT_ADD_SOF 0x09 |
| #define PORT100_IN_PROT_CHECK_SOF 0x0A |
| #define PORT100_IN_PROT_ADD_EOF 0x0B |
| #define PORT100_IN_PROT_CHECK_EOF 0x0C |
| #define PORT100_IN_PROT_DEAF_TIME 0x0E |
| #define PORT100_IN_PROT_CRM 0x0F |
| #define PORT100_IN_PROT_CRM_MIN_LEN 0x10 |
| #define PORT100_IN_PROT_T1_TAG_FRAME 0x11 |
| #define PORT100_IN_PROT_RFCA 0x12 |
| #define PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR 0x13 |
| #define PORT100_IN_PROT_END 0x14 |
| |
| #define PORT100_IN_MAX_NUM_PROTOCOLS 19 |
| |
| #define PORT100_TG_PROT_TU 0x00 |
| #define PORT100_TG_PROT_RF_OFF 0x01 |
| #define PORT100_TG_PROT_CRM 0x02 |
| #define PORT100_TG_PROT_END 0x03 |
| |
| #define PORT100_TG_MAX_NUM_PROTOCOLS 3 |
| |
| struct port100_protocol { |
| u8 number; |
| u8 value; |
| } __packed; |
| |
| static struct port100_protocol |
| in_protocols[][PORT100_IN_MAX_NUM_PROTOCOLS + 1] = { |
| [NFC_DIGITAL_FRAMING_NFCA_SHORT] = { |
| { PORT100_IN_PROT_INITIAL_GUARD_TIME, 6 }, |
| { PORT100_IN_PROT_ADD_CRC, 0 }, |
| { PORT100_IN_PROT_CHECK_CRC, 0 }, |
| { PORT100_IN_PROT_MULTI_CARD, 0 }, |
| { PORT100_IN_PROT_ADD_PARITY, 0 }, |
| { PORT100_IN_PROT_CHECK_PARITY, 1 }, |
| { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, |
| { PORT100_IN_PROT_VALID_BIT_NUMBER, 7 }, |
| { PORT100_IN_PROT_CRYPTO1, 0 }, |
| { PORT100_IN_PROT_ADD_SOF, 0 }, |
| { PORT100_IN_PROT_CHECK_SOF, 0 }, |
| { PORT100_IN_PROT_ADD_EOF, 0 }, |
| { PORT100_IN_PROT_CHECK_EOF, 0 }, |
| { PORT100_IN_PROT_DEAF_TIME, 4 }, |
| { PORT100_IN_PROT_CRM, 0 }, |
| { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, |
| { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, |
| { PORT100_IN_PROT_RFCA, 0 }, |
| { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_STANDARD] = { |
| { PORT100_IN_PROT_INITIAL_GUARD_TIME, 6 }, |
| { PORT100_IN_PROT_ADD_CRC, 0 }, |
| { PORT100_IN_PROT_CHECK_CRC, 0 }, |
| { PORT100_IN_PROT_MULTI_CARD, 0 }, |
| { PORT100_IN_PROT_ADD_PARITY, 1 }, |
| { PORT100_IN_PROT_CHECK_PARITY, 1 }, |
| { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, |
| { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, |
| { PORT100_IN_PROT_CRYPTO1, 0 }, |
| { PORT100_IN_PROT_ADD_SOF, 0 }, |
| { PORT100_IN_PROT_CHECK_SOF, 0 }, |
| { PORT100_IN_PROT_ADD_EOF, 0 }, |
| { PORT100_IN_PROT_CHECK_EOF, 0 }, |
| { PORT100_IN_PROT_DEAF_TIME, 4 }, |
| { PORT100_IN_PROT_CRM, 0 }, |
| { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, |
| { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, |
| { PORT100_IN_PROT_RFCA, 0 }, |
| { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A] = { |
| { PORT100_IN_PROT_INITIAL_GUARD_TIME, 6 }, |
| { PORT100_IN_PROT_ADD_CRC, 1 }, |
| { PORT100_IN_PROT_CHECK_CRC, 1 }, |
| { PORT100_IN_PROT_MULTI_CARD, 0 }, |
| { PORT100_IN_PROT_ADD_PARITY, 1 }, |
| { PORT100_IN_PROT_CHECK_PARITY, 1 }, |
| { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, |
| { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, |
| { PORT100_IN_PROT_CRYPTO1, 0 }, |
| { PORT100_IN_PROT_ADD_SOF, 0 }, |
| { PORT100_IN_PROT_CHECK_SOF, 0 }, |
| { PORT100_IN_PROT_ADD_EOF, 0 }, |
| { PORT100_IN_PROT_CHECK_EOF, 0 }, |
| { PORT100_IN_PROT_DEAF_TIME, 4 }, |
| { PORT100_IN_PROT_CRM, 0 }, |
| { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, |
| { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, |
| { PORT100_IN_PROT_RFCA, 0 }, |
| { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_T1T] = { |
| /* nfc_digital_framing_nfca_short */ |
| { PORT100_IN_PROT_ADD_CRC, 2 }, |
| { PORT100_IN_PROT_CHECK_CRC, 2 }, |
| { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, |
| { PORT100_IN_PROT_T1_TAG_FRAME, 2 }, |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_T2T] = { |
| /* nfc_digital_framing_nfca_standard */ |
| { PORT100_IN_PROT_ADD_CRC, 1 }, |
| { PORT100_IN_PROT_CHECK_CRC, 0 }, |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_NFC_DEP] = { |
| /* nfc_digital_framing_nfca_standard */ |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCF] = { |
| { PORT100_IN_PROT_INITIAL_GUARD_TIME, 18 }, |
| { PORT100_IN_PROT_ADD_CRC, 1 }, |
| { PORT100_IN_PROT_CHECK_CRC, 1 }, |
| { PORT100_IN_PROT_MULTI_CARD, 0 }, |
| { PORT100_IN_PROT_ADD_PARITY, 0 }, |
| { PORT100_IN_PROT_CHECK_PARITY, 0 }, |
| { PORT100_IN_PROT_BITWISE_AC_RECV_MODE, 0 }, |
| { PORT100_IN_PROT_VALID_BIT_NUMBER, 8 }, |
| { PORT100_IN_PROT_CRYPTO1, 0 }, |
| { PORT100_IN_PROT_ADD_SOF, 0 }, |
| { PORT100_IN_PROT_CHECK_SOF, 0 }, |
| { PORT100_IN_PROT_ADD_EOF, 0 }, |
| { PORT100_IN_PROT_CHECK_EOF, 0 }, |
| { PORT100_IN_PROT_DEAF_TIME, 4 }, |
| { PORT100_IN_PROT_CRM, 0 }, |
| { PORT100_IN_PROT_CRM_MIN_LEN, 0 }, |
| { PORT100_IN_PROT_T1_TAG_FRAME, 0 }, |
| { PORT100_IN_PROT_RFCA, 0 }, |
| { PORT100_IN_PROT_GUARD_TIME_AT_INITIATOR, 6 }, |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCF_T3T] = { |
| /* nfc_digital_framing_nfcf */ |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCF_NFC_DEP] = { |
| /* nfc_digital_framing_nfcf */ |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = { |
| { PORT100_IN_PROT_END, 0 }, |
| }, |
| }; |
| |
| static struct port100_protocol |
| tg_protocols[][PORT100_TG_MAX_NUM_PROTOCOLS + 1] = { |
| [NFC_DIGITAL_FRAMING_NFCA_SHORT] = { |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_STANDARD] = { |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A] = { |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_T1T] = { |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_T2T] = { |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCA_NFC_DEP] = { |
| { PORT100_TG_PROT_TU, 1 }, |
| { PORT100_TG_PROT_RF_OFF, 0 }, |
| { PORT100_TG_PROT_CRM, 7 }, |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCF] = { |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCF_T3T] = { |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFCF_NFC_DEP] = { |
| { PORT100_TG_PROT_TU, 1 }, |
| { PORT100_TG_PROT_RF_OFF, 0 }, |
| { PORT100_TG_PROT_CRM, 7 }, |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| [NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED] = { |
| { PORT100_TG_PROT_RF_OFF, 1 }, |
| { PORT100_TG_PROT_END, 0 }, |
| }, |
| }; |
| |
| struct port100 { |
| struct nfc_digital_dev *nfc_digital_dev; |
| |
| int skb_headroom; |
| int skb_tailroom; |
| |
| struct usb_device *udev; |
| struct usb_interface *interface; |
| |
| struct urb *out_urb; |
| struct urb *in_urb; |
| |
| struct work_struct cmd_complete_work; |
| |
| u8 cmd_type; |
| |
| /* The digital stack serializes commands to be sent. There is no need |
| * for any queuing/locking mechanism at driver level. |
| */ |
| struct port100_cmd *cmd; |
| }; |
| |
| struct port100_cmd { |
| u8 code; |
| int status; |
| struct sk_buff *req; |
| struct sk_buff *resp; |
| int resp_len; |
| port100_send_async_complete_t complete_cb; |
| void *complete_cb_context; |
| }; |
| |
| struct port100_frame { |
| u8 preamble; |
| __be16 start_frame; |
| __be16 extended_frame; |
| __le16 datalen; |
| u8 datalen_checksum; |
| u8 data[]; |
| } __packed; |
| |
| struct port100_ack_frame { |
| u8 preamble; |
| __be16 start_frame; |
| __be16 ack_frame; |
| u8 postambule; |
| } __packed; |
| |
| struct port100_cb_arg { |
| nfc_digital_cmd_complete_t complete_cb; |
| void *complete_arg; |
| u8 mdaa; |
| }; |
| |
| struct port100_tg_comm_rf_cmd { |
| __le16 guard_time; |
| __le16 send_timeout; |
| u8 mdaa; |
| u8 nfca_param[6]; |
| u8 nfcf_param[18]; |
| u8 mf_halted; |
| u8 arae_flag; |
| __le16 recv_timeout; |
| u8 data[]; |
| } __packed; |
| |
| struct port100_tg_comm_rf_res { |
| u8 comm_type; |
| u8 ar_status; |
| u8 target_activated; |
| __le32 status; |
| u8 data[]; |
| } __packed; |
| |
| /* The rule: value + checksum = 0 */ |
| static inline u8 port100_checksum(u16 value) |
| { |
| return ~(((u8 *)&value)[0] + ((u8 *)&value)[1]) + 1; |
| } |
| |
| /* The rule: sum(data elements) + checksum = 0 */ |
| static u8 port100_data_checksum(u8 *data, int datalen) |
| { |
| u8 sum = 0; |
| int i; |
| |
| for (i = 0; i < datalen; i++) |
| sum += data[i]; |
| |
| return port100_checksum(sum); |
| } |
| |
| static void port100_tx_frame_init(void *_frame, u8 cmd_code) |
| { |
| struct port100_frame *frame = _frame; |
| |
| frame->preamble = 0; |
| frame->start_frame = cpu_to_be16(PORT100_FRAME_SOF); |
| frame->extended_frame = cpu_to_be16(PORT100_FRAME_EXT); |
| PORT100_FRAME_DIRECTION(frame) = PORT100_FRAME_DIR_OUT; |
| PORT100_FRAME_CMD(frame) = cmd_code; |
| frame->datalen = cpu_to_le16(2); |
| } |
| |
| static void port100_tx_frame_finish(void *_frame) |
| { |
| struct port100_frame *frame = _frame; |
| |
| frame->datalen_checksum = port100_checksum(le16_to_cpu(frame->datalen)); |
| |
| PORT100_FRAME_CHECKSUM(frame) = |
| port100_data_checksum(frame->data, le16_to_cpu(frame->datalen)); |
| |
| PORT100_FRAME_POSTAMBLE(frame) = 0; |
| } |
| |
| static void port100_tx_update_payload_len(void *_frame, int len) |
| { |
| struct port100_frame *frame = _frame; |
| |
| frame->datalen = cpu_to_le16(le16_to_cpu(frame->datalen) + len); |
| } |
| |
| static bool port100_rx_frame_is_valid(void *_frame) |
| { |
| u8 checksum; |
| struct port100_frame *frame = _frame; |
| |
| if (frame->start_frame != cpu_to_be16(PORT100_FRAME_SOF) || |
| frame->extended_frame != cpu_to_be16(PORT100_FRAME_EXT)) |
| return false; |
| |
| checksum = port100_checksum(le16_to_cpu(frame->datalen)); |
| if (checksum != frame->datalen_checksum) |
| return false; |
| |
| checksum = port100_data_checksum(frame->data, |
| le16_to_cpu(frame->datalen)); |
| if (checksum != PORT100_FRAME_CHECKSUM(frame)) |
| return false; |
| |
| return true; |
| } |
| |
| static bool port100_rx_frame_is_ack(struct port100_ack_frame *frame) |
| { |
| return (frame->start_frame == cpu_to_be16(PORT100_FRAME_SOF) && |
| frame->ack_frame == cpu_to_be16(PORT100_FRAME_ACK)); |
| } |
| |
| static inline int port100_rx_frame_size(void *frame) |
| { |
| struct port100_frame *f = frame; |
| |
| return sizeof(struct port100_frame) + le16_to_cpu(f->datalen) + |
| PORT100_FRAME_TAIL_LEN; |
| } |
| |
| static bool port100_rx_frame_is_cmd_response(struct port100 *dev, void *frame) |
| { |
| struct port100_frame *f = frame; |
| |
| return (PORT100_FRAME_CMD(f) == PORT100_CMD_RESPONSE(dev->cmd->code)); |
| } |
| |
| static void port100_recv_response(struct urb *urb) |
| { |
| struct port100 *dev = urb->context; |
| struct port100_cmd *cmd = dev->cmd; |
| u8 *in_frame; |
| |
| cmd->status = urb->status; |
| |
| switch (urb->status) { |
| case 0: |
| break; /* success */ |
| case -ECONNRESET: |
| case -ENOENT: |
| nfc_err(&dev->interface->dev, |
| "The urb has been canceled (status %d)", urb->status); |
| goto sched_wq; |
| case -ESHUTDOWN: |
| default: |
| nfc_err(&dev->interface->dev, "Urb failure (status %d)", |
| urb->status); |
| goto sched_wq; |
| } |
| |
| in_frame = dev->in_urb->transfer_buffer; |
| |
| if (!port100_rx_frame_is_valid(in_frame)) { |
| nfc_err(&dev->interface->dev, "Received an invalid frame"); |
| cmd->status = -EIO; |
| goto sched_wq; |
| } |
| |
| print_hex_dump_debug("PORT100 RX: ", DUMP_PREFIX_NONE, 16, 1, in_frame, |
| port100_rx_frame_size(in_frame), false); |
| |
| if (!port100_rx_frame_is_cmd_response(dev, in_frame)) { |
| nfc_err(&dev->interface->dev, |
| "It's not the response to the last command"); |
| cmd->status = -EIO; |
| goto sched_wq; |
| } |
| |
| sched_wq: |
| schedule_work(&dev->cmd_complete_work); |
| } |
| |
| static int port100_submit_urb_for_response(struct port100 *dev, gfp_t flags) |
| { |
| dev->in_urb->complete = port100_recv_response; |
| |
| return usb_submit_urb(dev->in_urb, flags); |
| } |
| |
| static void port100_recv_ack(struct urb *urb) |
| { |
| struct port100 *dev = urb->context; |
| struct port100_cmd *cmd = dev->cmd; |
| struct port100_ack_frame *in_frame; |
| int rc; |
| |
| cmd->status = urb->status; |
| |
| switch (urb->status) { |
| case 0: |
| break; /* success */ |
| case -ECONNRESET: |
| case -ENOENT: |
| nfc_err(&dev->interface->dev, |
| "The urb has been stopped (status %d)", urb->status); |
| goto sched_wq; |
| case -ESHUTDOWN: |
| default: |
| nfc_err(&dev->interface->dev, "Urb failure (status %d)", |
| urb->status); |
| goto sched_wq; |
| } |
| |
| in_frame = dev->in_urb->transfer_buffer; |
| |
| if (!port100_rx_frame_is_ack(in_frame)) { |
| nfc_err(&dev->interface->dev, "Received an invalid ack"); |
| cmd->status = -EIO; |
| goto sched_wq; |
| } |
| |
| rc = port100_submit_urb_for_response(dev, GFP_ATOMIC); |
| if (rc) { |
| nfc_err(&dev->interface->dev, |
| "usb_submit_urb failed with result %d", rc); |
| cmd->status = rc; |
| goto sched_wq; |
| } |
| |
| return; |
| |
| sched_wq: |
| schedule_work(&dev->cmd_complete_work); |
| } |
| |
| static int port100_submit_urb_for_ack(struct port100 *dev, gfp_t flags) |
| { |
| dev->in_urb->complete = port100_recv_ack; |
| |
| return usb_submit_urb(dev->in_urb, flags); |
| } |
| |
| static int port100_send_ack(struct port100 *dev) |
| { |
| int rc; |
| |
| dev->out_urb->transfer_buffer = ack_frame; |
| dev->out_urb->transfer_buffer_length = sizeof(ack_frame); |
| rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); |
| |
| return rc; |
| } |
| |
| static int port100_send_frame_async(struct port100 *dev, struct sk_buff *out, |
| struct sk_buff *in, int in_len) |
| { |
| int rc; |
| |
| dev->out_urb->transfer_buffer = out->data; |
| dev->out_urb->transfer_buffer_length = out->len; |
| |
| dev->in_urb->transfer_buffer = in->data; |
| dev->in_urb->transfer_buffer_length = in_len; |
| |
| print_hex_dump_debug("PORT100 TX: ", DUMP_PREFIX_NONE, 16, 1, |
| out->data, out->len, false); |
| |
| rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); |
| if (rc) |
| return rc; |
| |
| rc = port100_submit_urb_for_ack(dev, GFP_KERNEL); |
| if (rc) |
| goto error; |
| |
| return 0; |
| |
| error: |
| usb_unlink_urb(dev->out_urb); |
| return rc; |
| } |
| |
| static void port100_build_cmd_frame(struct port100 *dev, u8 cmd_code, |
| struct sk_buff *skb) |
| { |
| /* payload is already there, just update datalen */ |
| int payload_len = skb->len; |
| |
| skb_push(skb, PORT100_FRAME_HEADER_LEN); |
| skb_put(skb, PORT100_FRAME_TAIL_LEN); |
| |
| port100_tx_frame_init(skb->data, cmd_code); |
| port100_tx_update_payload_len(skb->data, payload_len); |
| port100_tx_frame_finish(skb->data); |
| } |
| |
| static void port100_send_async_complete(struct port100 *dev) |
| { |
| struct port100_cmd *cmd = dev->cmd; |
| int status = cmd->status; |
| |
| struct sk_buff *req = cmd->req; |
| struct sk_buff *resp = cmd->resp; |
| |
| dev_kfree_skb(req); |
| |
| dev->cmd = NULL; |
| |
| if (status < 0) { |
| cmd->complete_cb(dev, cmd->complete_cb_context, |
| ERR_PTR(status)); |
| dev_kfree_skb(resp); |
| goto done; |
| } |
| |
| skb_put(resp, port100_rx_frame_size(resp->data)); |
| skb_pull(resp, PORT100_FRAME_HEADER_LEN); |
| skb_trim(resp, resp->len - PORT100_FRAME_TAIL_LEN); |
| |
| cmd->complete_cb(dev, cmd->complete_cb_context, resp); |
| |
| done: |
| kfree(cmd); |
| } |
| |
| static int port100_send_cmd_async(struct port100 *dev, u8 cmd_code, |
| struct sk_buff *req, |
| port100_send_async_complete_t complete_cb, |
| void *complete_cb_context) |
| { |
| struct port100_cmd *cmd; |
| struct sk_buff *resp; |
| int rc; |
| int resp_len = PORT100_FRAME_HEADER_LEN + |
| PORT100_FRAME_MAX_PAYLOAD_LEN + |
| PORT100_FRAME_TAIL_LEN; |
| |
| resp = alloc_skb(resp_len, GFP_KERNEL); |
| if (!resp) |
| return -ENOMEM; |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| dev_kfree_skb(resp); |
| return -ENOMEM; |
| } |
| |
| cmd->code = cmd_code; |
| cmd->req = req; |
| cmd->resp = resp; |
| cmd->resp_len = resp_len; |
| cmd->complete_cb = complete_cb; |
| cmd->complete_cb_context = complete_cb_context; |
| |
| port100_build_cmd_frame(dev, cmd_code, req); |
| |
| dev->cmd = cmd; |
| |
| rc = port100_send_frame_async(dev, req, resp, resp_len); |
| if (rc) { |
| kfree(cmd); |
| dev_kfree_skb(resp); |
| dev->cmd = NULL; |
| } |
| |
| return rc; |
| } |
| |
| struct port100_sync_cmd_response { |
| struct sk_buff *resp; |
| struct completion done; |
| }; |
| |
| static void port100_wq_cmd_complete(struct work_struct *work) |
| { |
| struct port100 *dev = container_of(work, struct port100, |
| cmd_complete_work); |
| |
| port100_send_async_complete(dev); |
| } |
| |
| static void port100_send_sync_complete(struct port100 *dev, void *_arg, |
| struct sk_buff *resp) |
| { |
| struct port100_sync_cmd_response *arg = _arg; |
| |
| arg->resp = resp; |
| complete(&arg->done); |
| } |
| |
| static struct sk_buff *port100_send_cmd_sync(struct port100 *dev, u8 cmd_code, |
| struct sk_buff *req) |
| { |
| int rc; |
| struct port100_sync_cmd_response arg; |
| |
| init_completion(&arg.done); |
| |
| rc = port100_send_cmd_async(dev, cmd_code, req, |
| port100_send_sync_complete, &arg); |
| if (rc) { |
| dev_kfree_skb(req); |
| return ERR_PTR(rc); |
| } |
| |
| wait_for_completion(&arg.done); |
| |
| return arg.resp; |
| } |
| |
| static void port100_send_complete(struct urb *urb) |
| { |
| struct port100 *dev = urb->context; |
| |
| switch (urb->status) { |
| case 0: |
| break; /* success */ |
| case -ECONNRESET: |
| case -ENOENT: |
| nfc_err(&dev->interface->dev, |
| "The urb has been stopped (status %d)", urb->status); |
| break; |
| case -ESHUTDOWN: |
| default: |
| nfc_err(&dev->interface->dev, "Urb failure (status %d)", |
| urb->status); |
| } |
| } |
| |
| static void port100_abort_cmd(struct nfc_digital_dev *ddev) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| |
| /* An ack will cancel the last issued command */ |
| port100_send_ack(dev); |
| |
| /* cancel the urb request */ |
| usb_kill_urb(dev->in_urb); |
| } |
| |
| static struct sk_buff *port100_alloc_skb(struct port100 *dev, unsigned int size) |
| { |
| struct sk_buff *skb; |
| |
| skb = alloc_skb(dev->skb_headroom + dev->skb_tailroom + size, |
| GFP_KERNEL); |
| if (skb) |
| skb_reserve(skb, dev->skb_headroom); |
| |
| return skb; |
| } |
| |
| static int port100_set_command_type(struct port100 *dev, u8 command_type) |
| { |
| struct sk_buff *skb; |
| struct sk_buff *resp; |
| int rc; |
| |
| skb = port100_alloc_skb(dev, 1); |
| if (!skb) |
| return -ENOMEM; |
| |
| *skb_put(skb, sizeof(u8)) = command_type; |
| |
| resp = port100_send_cmd_sync(dev, PORT100_CMD_SET_COMMAND_TYPE, skb); |
| if (IS_ERR(resp)) |
| return PTR_ERR(resp); |
| |
| rc = resp->data[0]; |
| |
| dev_kfree_skb(resp); |
| |
| return rc; |
| } |
| |
| static u64 port100_get_command_type_mask(struct port100 *dev) |
| { |
| struct sk_buff *skb; |
| struct sk_buff *resp; |
| u64 mask; |
| |
| skb = port100_alloc_skb(dev, 0); |
| if (!skb) |
| return -ENOMEM; |
| |
| resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_COMMAND_TYPE, skb); |
| if (IS_ERR(resp)) |
| return PTR_ERR(resp); |
| |
| if (resp->len < 8) |
| mask = 0; |
| else |
| mask = be64_to_cpu(*(__be64 *)resp->data); |
| |
| dev_kfree_skb(resp); |
| |
| return mask; |
| } |
| |
| static u16 port100_get_firmware_version(struct port100 *dev) |
| { |
| struct sk_buff *skb; |
| struct sk_buff *resp; |
| u16 fw_ver; |
| |
| skb = port100_alloc_skb(dev, 0); |
| if (!skb) |
| return 0; |
| |
| resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_FIRMWARE_VERSION, |
| skb); |
| if (IS_ERR(resp)) |
| return 0; |
| |
| fw_ver = le16_to_cpu(*(__le16 *)resp->data); |
| |
| dev_kfree_skb(resp); |
| |
| return fw_ver; |
| } |
| |
| static int port100_switch_rf(struct nfc_digital_dev *ddev, bool on) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct sk_buff *skb, *resp; |
| |
| skb = port100_alloc_skb(dev, 1); |
| if (!skb) |
| return -ENOMEM; |
| |
| *skb_put(skb, 1) = on ? 1 : 0; |
| |
| resp = port100_send_cmd_sync(dev, PORT100_CMD_SWITCH_RF, skb); |
| |
| if (IS_ERR(resp)) |
| return PTR_ERR(resp); |
| |
| dev_kfree_skb(resp); |
| |
| return 0; |
| } |
| |
| static int port100_in_set_rf(struct nfc_digital_dev *ddev, u8 rf) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct sk_buff *skb; |
| struct sk_buff *resp; |
| int rc; |
| |
| if (rf >= NFC_DIGITAL_RF_TECH_LAST) |
| return -EINVAL; |
| |
| skb = port100_alloc_skb(dev, sizeof(struct port100_in_rf_setting)); |
| if (!skb) |
| return -ENOMEM; |
| |
| memcpy(skb_put(skb, sizeof(struct port100_in_rf_setting)), |
| &in_rf_settings[rf], |
| sizeof(struct port100_in_rf_setting)); |
| |
| resp = port100_send_cmd_sync(dev, PORT100_CMD_IN_SET_RF, skb); |
| |
| if (IS_ERR(resp)) |
| return PTR_ERR(resp); |
| |
| rc = resp->data[0]; |
| |
| dev_kfree_skb(resp); |
| |
| return rc; |
| } |
| |
| static int port100_in_set_framing(struct nfc_digital_dev *ddev, int param) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct port100_protocol *protocols; |
| struct sk_buff *skb; |
| struct sk_buff *resp; |
| int num_protocols; |
| size_t size; |
| int rc; |
| |
| if (param >= NFC_DIGITAL_FRAMING_LAST) |
| return -EINVAL; |
| |
| protocols = in_protocols[param]; |
| |
| num_protocols = 0; |
| while (protocols[num_protocols].number != PORT100_IN_PROT_END) |
| num_protocols++; |
| |
| if (!num_protocols) |
| return 0; |
| |
| size = sizeof(struct port100_protocol) * num_protocols; |
| |
| skb = port100_alloc_skb(dev, size); |
| if (!skb) |
| return -ENOMEM; |
| |
| memcpy(skb_put(skb, size), protocols, size); |
| |
| resp = port100_send_cmd_sync(dev, PORT100_CMD_IN_SET_PROTOCOL, skb); |
| |
| if (IS_ERR(resp)) |
| return PTR_ERR(resp); |
| |
| rc = resp->data[0]; |
| |
| dev_kfree_skb(resp); |
| |
| return rc; |
| } |
| |
| static int port100_in_configure_hw(struct nfc_digital_dev *ddev, int type, |
| int param) |
| { |
| if (type == NFC_DIGITAL_CONFIG_RF_TECH) |
| return port100_in_set_rf(ddev, param); |
| |
| if (type == NFC_DIGITAL_CONFIG_FRAMING) |
| return port100_in_set_framing(ddev, param); |
| |
| return -EINVAL; |
| } |
| |
| static void port100_in_comm_rf_complete(struct port100 *dev, void *arg, |
| struct sk_buff *resp) |
| { |
| struct port100_cb_arg *cb_arg = arg; |
| nfc_digital_cmd_complete_t cb = cb_arg->complete_cb; |
| u32 status; |
| int rc; |
| |
| if (IS_ERR(resp)) { |
| rc = PTR_ERR(resp); |
| goto exit; |
| } |
| |
| if (resp->len < 4) { |
| nfc_err(&dev->interface->dev, |
| "Invalid packet length received.\n"); |
| rc = -EIO; |
| goto error; |
| } |
| |
| status = le32_to_cpu(*(__le32 *)resp->data); |
| |
| skb_pull(resp, sizeof(u32)); |
| |
| if (status == PORT100_CMD_STATUS_TIMEOUT) { |
| rc = -ETIMEDOUT; |
| goto error; |
| } |
| |
| if (status != PORT100_CMD_STATUS_OK) { |
| nfc_err(&dev->interface->dev, |
| "in_comm_rf failed with status 0x%08x\n", status); |
| rc = -EIO; |
| goto error; |
| } |
| |
| /* Remove collision bits byte */ |
| skb_pull(resp, 1); |
| |
| goto exit; |
| |
| error: |
| kfree_skb(resp); |
| resp = ERR_PTR(rc); |
| |
| exit: |
| cb(dev->nfc_digital_dev, cb_arg->complete_arg, resp); |
| |
| kfree(cb_arg); |
| } |
| |
| static int port100_in_send_cmd(struct nfc_digital_dev *ddev, |
| struct sk_buff *skb, u16 _timeout, |
| nfc_digital_cmd_complete_t cb, void *arg) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct port100_cb_arg *cb_arg; |
| __le16 timeout; |
| |
| cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL); |
| if (!cb_arg) |
| return -ENOMEM; |
| |
| cb_arg->complete_cb = cb; |
| cb_arg->complete_arg = arg; |
| |
| timeout = cpu_to_le16(_timeout * 10); |
| |
| memcpy(skb_push(skb, sizeof(__le16)), &timeout, sizeof(__le16)); |
| |
| return port100_send_cmd_async(dev, PORT100_CMD_IN_COMM_RF, skb, |
| port100_in_comm_rf_complete, cb_arg); |
| } |
| |
| static int port100_tg_set_rf(struct nfc_digital_dev *ddev, u8 rf) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct sk_buff *skb; |
| struct sk_buff *resp; |
| int rc; |
| |
| if (rf >= NFC_DIGITAL_RF_TECH_LAST) |
| return -EINVAL; |
| |
| skb = port100_alloc_skb(dev, sizeof(struct port100_tg_rf_setting)); |
| if (!skb) |
| return -ENOMEM; |
| |
| memcpy(skb_put(skb, sizeof(struct port100_tg_rf_setting)), |
| &tg_rf_settings[rf], |
| sizeof(struct port100_tg_rf_setting)); |
| |
| resp = port100_send_cmd_sync(dev, PORT100_CMD_TG_SET_RF, skb); |
| |
| if (IS_ERR(resp)) |
| return PTR_ERR(resp); |
| |
| rc = resp->data[0]; |
| |
| dev_kfree_skb(resp); |
| |
| return rc; |
| } |
| |
| static int port100_tg_set_framing(struct nfc_digital_dev *ddev, int param) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct port100_protocol *protocols; |
| struct sk_buff *skb; |
| struct sk_buff *resp; |
| int rc; |
| int num_protocols; |
| size_t size; |
| |
| if (param >= NFC_DIGITAL_FRAMING_LAST) |
| return -EINVAL; |
| |
| protocols = tg_protocols[param]; |
| |
| num_protocols = 0; |
| while (protocols[num_protocols].number != PORT100_TG_PROT_END) |
| num_protocols++; |
| |
| if (!num_protocols) |
| return 0; |
| |
| size = sizeof(struct port100_protocol) * num_protocols; |
| |
| skb = port100_alloc_skb(dev, size); |
| if (!skb) |
| return -ENOMEM; |
| |
| memcpy(skb_put(skb, size), protocols, size); |
| |
| resp = port100_send_cmd_sync(dev, PORT100_CMD_TG_SET_PROTOCOL, skb); |
| |
| if (IS_ERR(resp)) |
| return PTR_ERR(resp); |
| |
| rc = resp->data[0]; |
| |
| dev_kfree_skb(resp); |
| |
| return rc; |
| } |
| |
| static int port100_tg_configure_hw(struct nfc_digital_dev *ddev, int type, |
| int param) |
| { |
| if (type == NFC_DIGITAL_CONFIG_RF_TECH) |
| return port100_tg_set_rf(ddev, param); |
| |
| if (type == NFC_DIGITAL_CONFIG_FRAMING) |
| return port100_tg_set_framing(ddev, param); |
| |
| return -EINVAL; |
| } |
| |
| static bool port100_tg_target_activated(struct port100 *dev, u8 tgt_activated) |
| { |
| u8 mask; |
| |
| switch (dev->cmd_type) { |
| case PORT100_CMD_TYPE_0: |
| mask = PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK; |
| break; |
| case PORT100_CMD_TYPE_1: |
| mask = PORT100_MDAA_TGT_HAS_BEEN_ACTIVATED_MASK | |
| PORT100_MDAA_TGT_WAS_ACTIVATED_MASK; |
| break; |
| default: |
| nfc_err(&dev->interface->dev, "Unknonwn command type.\n"); |
| return false; |
| } |
| |
| return ((tgt_activated & mask) == mask); |
| } |
| |
| static void port100_tg_comm_rf_complete(struct port100 *dev, void *arg, |
| struct sk_buff *resp) |
| { |
| u32 status; |
| struct port100_cb_arg *cb_arg = arg; |
| nfc_digital_cmd_complete_t cb = cb_arg->complete_cb; |
| struct port100_tg_comm_rf_res *hdr; |
| |
| if (IS_ERR(resp)) |
| goto exit; |
| |
| hdr = (struct port100_tg_comm_rf_res *)resp->data; |
| |
| status = le32_to_cpu(hdr->status); |
| |
| if (cb_arg->mdaa && |
| !port100_tg_target_activated(dev, hdr->target_activated)) { |
| kfree_skb(resp); |
| resp = ERR_PTR(-ETIMEDOUT); |
| |
| goto exit; |
| } |
| |
| skb_pull(resp, sizeof(struct port100_tg_comm_rf_res)); |
| |
| if (status != PORT100_CMD_STATUS_OK) { |
| kfree_skb(resp); |
| |
| if (status == PORT100_CMD_STATUS_TIMEOUT) |
| resp = ERR_PTR(-ETIMEDOUT); |
| else |
| resp = ERR_PTR(-EIO); |
| } |
| |
| exit: |
| cb(dev->nfc_digital_dev, cb_arg->complete_arg, resp); |
| |
| kfree(cb_arg); |
| } |
| |
| static int port100_tg_send_cmd(struct nfc_digital_dev *ddev, |
| struct sk_buff *skb, u16 timeout, |
| nfc_digital_cmd_complete_t cb, void *arg) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct port100_tg_comm_rf_cmd *hdr; |
| struct port100_cb_arg *cb_arg; |
| |
| cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL); |
| if (!cb_arg) |
| return -ENOMEM; |
| |
| cb_arg->complete_cb = cb; |
| cb_arg->complete_arg = arg; |
| |
| skb_push(skb, sizeof(struct port100_tg_comm_rf_cmd)); |
| |
| hdr = (struct port100_tg_comm_rf_cmd *)skb->data; |
| |
| memset(hdr, 0, sizeof(struct port100_tg_comm_rf_cmd)); |
| hdr->guard_time = cpu_to_le16(500); |
| hdr->send_timeout = cpu_to_le16(0xFFFF); |
| hdr->recv_timeout = cpu_to_le16(timeout); |
| |
| return port100_send_cmd_async(dev, PORT100_CMD_TG_COMM_RF, skb, |
| port100_tg_comm_rf_complete, cb_arg); |
| } |
| |
| static int port100_listen_mdaa(struct nfc_digital_dev *ddev, |
| struct digital_tg_mdaa_params *params, |
| u16 timeout, |
| nfc_digital_cmd_complete_t cb, void *arg) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct port100_tg_comm_rf_cmd *hdr; |
| struct port100_cb_arg *cb_arg; |
| struct sk_buff *skb; |
| int rc; |
| |
| rc = port100_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH, |
| NFC_DIGITAL_RF_TECH_106A); |
| if (rc) |
| return rc; |
| |
| rc = port100_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING, |
| NFC_DIGITAL_FRAMING_NFCA_NFC_DEP); |
| if (rc) |
| return rc; |
| |
| cb_arg = kzalloc(sizeof(struct port100_cb_arg), GFP_KERNEL); |
| if (!cb_arg) |
| return -ENOMEM; |
| |
| cb_arg->complete_cb = cb; |
| cb_arg->complete_arg = arg; |
| cb_arg->mdaa = 1; |
| |
| skb = port100_alloc_skb(dev, 0); |
| if (!skb) { |
| kfree(cb_arg); |
| return -ENOMEM; |
| } |
| |
| skb_push(skb, sizeof(struct port100_tg_comm_rf_cmd)); |
| hdr = (struct port100_tg_comm_rf_cmd *)skb->data; |
| |
| memset(hdr, 0, sizeof(struct port100_tg_comm_rf_cmd)); |
| |
| hdr->guard_time = 0; |
| hdr->send_timeout = cpu_to_le16(0xFFFF); |
| hdr->mdaa = 1; |
| hdr->nfca_param[0] = (params->sens_res >> 8) & 0xFF; |
| hdr->nfca_param[1] = params->sens_res & 0xFF; |
| memcpy(hdr->nfca_param + 2, params->nfcid1, 3); |
| hdr->nfca_param[5] = params->sel_res; |
| memcpy(hdr->nfcf_param, params->nfcid2, 8); |
| hdr->nfcf_param[16] = (params->sc >> 8) & 0xFF; |
| hdr->nfcf_param[17] = params->sc & 0xFF; |
| hdr->recv_timeout = cpu_to_le16(timeout); |
| |
| return port100_send_cmd_async(dev, PORT100_CMD_TG_COMM_RF, skb, |
| port100_tg_comm_rf_complete, cb_arg); |
| } |
| |
| static int port100_listen(struct nfc_digital_dev *ddev, u16 timeout, |
| nfc_digital_cmd_complete_t cb, void *arg) |
| { |
| struct port100 *dev = nfc_digital_get_drvdata(ddev); |
| struct sk_buff *skb; |
| |
| skb = port100_alloc_skb(dev, 0); |
| if (!skb) |
| return -ENOMEM; |
| |
| return port100_tg_send_cmd(ddev, skb, timeout, cb, arg); |
| } |
| |
| static struct nfc_digital_ops port100_digital_ops = { |
| .in_configure_hw = port100_in_configure_hw, |
| .in_send_cmd = port100_in_send_cmd, |
| |
| .tg_listen_mdaa = port100_listen_mdaa, |
| .tg_listen = port100_listen, |
| .tg_configure_hw = port100_tg_configure_hw, |
| .tg_send_cmd = port100_tg_send_cmd, |
| |
| .switch_rf = port100_switch_rf, |
| .abort_cmd = port100_abort_cmd, |
| }; |
| |
| static const struct usb_device_id port100_table[] = { |
| { .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = SONY_VENDOR_ID, |
| .idProduct = RCS380_PRODUCT_ID, |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, port100_table); |
| |
| static int port100_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct port100 *dev; |
| int rc; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int in_endpoint; |
| int out_endpoint; |
| u16 fw_version; |
| u64 cmd_type_mask; |
| int i; |
| |
| dev = devm_kzalloc(&interface->dev, sizeof(struct port100), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| dev->udev = usb_get_dev(interface_to_usbdev(interface)); |
| dev->interface = interface; |
| usb_set_intfdata(interface, dev); |
| |
| in_endpoint = out_endpoint = 0; |
| iface_desc = interface->cur_altsetting; |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| |
| if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) |
| in_endpoint = endpoint->bEndpointAddress; |
| |
| if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) |
| out_endpoint = endpoint->bEndpointAddress; |
| } |
| |
| if (!in_endpoint || !out_endpoint) { |
| nfc_err(&interface->dev, |
| "Could not find bulk-in or bulk-out endpoint\n"); |
| rc = -ENODEV; |
| goto error; |
| } |
| |
| dev->in_urb = usb_alloc_urb(0, GFP_KERNEL); |
| dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); |
| |
| if (!dev->in_urb || !dev->out_urb) { |
| nfc_err(&interface->dev, "Could not allocate USB URBs\n"); |
| rc = -ENOMEM; |
| goto error; |
| } |
| |
| usb_fill_bulk_urb(dev->in_urb, dev->udev, |
| usb_rcvbulkpipe(dev->udev, in_endpoint), |
| NULL, 0, NULL, dev); |
| usb_fill_bulk_urb(dev->out_urb, dev->udev, |
| usb_sndbulkpipe(dev->udev, out_endpoint), |
| NULL, 0, port100_send_complete, dev); |
| |
| dev->skb_headroom = PORT100_FRAME_HEADER_LEN + |
| PORT100_COMM_RF_HEAD_MAX_LEN; |
| dev->skb_tailroom = PORT100_FRAME_TAIL_LEN; |
| |
| INIT_WORK(&dev->cmd_complete_work, port100_wq_cmd_complete); |
| |
| /* The first thing to do with the Port-100 is to set the command type |
| * to be used. If supported we use command type 1. 0 otherwise. |
| */ |
| cmd_type_mask = port100_get_command_type_mask(dev); |
| if (!cmd_type_mask) { |
| nfc_err(&interface->dev, |
| "Could not get supported command types.\n"); |
| rc = -ENODEV; |
| goto error; |
| } |
| |
| if (PORT100_CMD_TYPE_IS_SUPPORTED(cmd_type_mask, PORT100_CMD_TYPE_1)) |
| dev->cmd_type = PORT100_CMD_TYPE_1; |
| else |
| dev->cmd_type = PORT100_CMD_TYPE_0; |
| |
| rc = port100_set_command_type(dev, dev->cmd_type); |
| if (rc) { |
| nfc_err(&interface->dev, |
| "The device does not support command type %u.\n", |
| dev->cmd_type); |
| goto error; |
| } |
| |
| fw_version = port100_get_firmware_version(dev); |
| if (!fw_version) |
| nfc_err(&interface->dev, |
| "Could not get device firmware version.\n"); |
| |
| nfc_info(&interface->dev, |
| "Sony NFC Port-100 Series attached (firmware v%x.%02x)\n", |
| (fw_version & 0xFF00) >> 8, fw_version & 0xFF); |
| |
| dev->nfc_digital_dev = nfc_digital_allocate_device(&port100_digital_ops, |
| PORT100_PROTOCOLS, |
| PORT100_CAPABILITIES, |
| dev->skb_headroom, |
| dev->skb_tailroom); |
| if (!dev->nfc_digital_dev) { |
| nfc_err(&interface->dev, |
| "Could not allocate nfc_digital_dev.\n"); |
| rc = -ENOMEM; |
| goto error; |
| } |
| |
| nfc_digital_set_parent_dev(dev->nfc_digital_dev, &interface->dev); |
| nfc_digital_set_drvdata(dev->nfc_digital_dev, dev); |
| |
| rc = nfc_digital_register_device(dev->nfc_digital_dev); |
| if (rc) { |
| nfc_err(&interface->dev, |
| "Could not register digital device.\n"); |
| goto free_nfc_dev; |
| } |
| |
| return 0; |
| |
| free_nfc_dev: |
| nfc_digital_free_device(dev->nfc_digital_dev); |
| |
| error: |
| usb_free_urb(dev->in_urb); |
| usb_free_urb(dev->out_urb); |
| usb_put_dev(dev->udev); |
| |
| return rc; |
| } |
| |
| static void port100_disconnect(struct usb_interface *interface) |
| { |
| struct port100 *dev; |
| |
| dev = usb_get_intfdata(interface); |
| usb_set_intfdata(interface, NULL); |
| |
| nfc_digital_unregister_device(dev->nfc_digital_dev); |
| nfc_digital_free_device(dev->nfc_digital_dev); |
| |
| usb_kill_urb(dev->in_urb); |
| usb_kill_urb(dev->out_urb); |
| |
| usb_free_urb(dev->in_urb); |
| usb_free_urb(dev->out_urb); |
| usb_put_dev(dev->udev); |
| |
| kfree(dev->cmd); |
| |
| nfc_info(&interface->dev, "Sony Port-100 NFC device disconnected"); |
| } |
| |
| static struct usb_driver port100_driver = { |
| .name = "port100", |
| .probe = port100_probe, |
| .disconnect = port100_disconnect, |
| .id_table = port100_table, |
| }; |
| |
| module_usb_driver(port100_driver); |
| |
| MODULE_DESCRIPTION("NFC Port-100 series usb driver ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |