|  | /*-*-linux-c-*-*/ | 
|  |  | 
|  | /* | 
|  | Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@just42.net> | 
|  | Copyright (C) 2008 Peter Gruber <nokos@gmx.net> | 
|  | Copyright (C) 2008 Tony Vroon <tony@linx.net> | 
|  | Based on earlier work: | 
|  | Copyright (C) 2003 Shane Spencer <shane@bogomip.com> | 
|  | Adrian Yee <brewt-fujitsu@brewt.org> | 
|  |  | 
|  | Templated from msi-laptop.c and thinkpad_acpi.c which is copyright | 
|  | by its respective authors. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, but | 
|  | WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the Free Software | 
|  | Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | 
|  | 02110-1301, USA. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional | 
|  | * features made available on a range of Fujitsu laptops including the | 
|  | * P2xxx/P5xxx/S6xxx/S7xxx series. | 
|  | * | 
|  | * This driver exports a few files in /sys/devices/platform/fujitsu-laptop/; | 
|  | * others may be added at a later date. | 
|  | * | 
|  | *   lcd_level - Screen brightness: contains a single integer in the | 
|  | *   range 0..7. (rw) | 
|  | * | 
|  | * In addition to these platform device attributes the driver | 
|  | * registers itself in the Linux backlight control subsystem and is | 
|  | * available to userspace under /sys/class/backlight/fujitsu-laptop/. | 
|  | * | 
|  | * Hotkeys present on certain Fujitsu laptops (eg: the S6xxx series) are | 
|  | * also supported by this driver. | 
|  | * | 
|  | * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and | 
|  | * P8010.  It should work on most P-series and S-series Lifebooks, but | 
|  | * YMMV. | 
|  | * | 
|  | * The module parameter use_alt_lcd_levels switches between different ACPI | 
|  | * brightness controls which are used by different Fujitsu laptops.  In most | 
|  | * cases the correct method is automatically detected. "use_alt_lcd_levels=1" | 
|  | * is applicable for a Fujitsu Lifebook S6410 if autodetection fails. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/backlight.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/kfifo.h> | 
|  | #include <linux/video_output.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  | #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) | 
|  | #include <linux/leds.h> | 
|  | #endif | 
|  |  | 
|  | #define FUJITSU_DRIVER_VERSION "0.6.0" | 
|  |  | 
|  | #define FUJITSU_LCD_N_LEVELS 8 | 
|  |  | 
|  | #define ACPI_FUJITSU_CLASS              "fujitsu" | 
|  | #define ACPI_FUJITSU_HID                "FUJ02B1" | 
|  | #define ACPI_FUJITSU_DRIVER_NAME	"Fujitsu laptop FUJ02B1 ACPI brightness driver" | 
|  | #define ACPI_FUJITSU_DEVICE_NAME        "Fujitsu FUJ02B1" | 
|  | #define ACPI_FUJITSU_HOTKEY_HID 	"FUJ02E3" | 
|  | #define ACPI_FUJITSU_HOTKEY_DRIVER_NAME "Fujitsu laptop FUJ02E3 ACPI hotkeys driver" | 
|  | #define ACPI_FUJITSU_HOTKEY_DEVICE_NAME "Fujitsu FUJ02E3" | 
|  |  | 
|  | #define ACPI_FUJITSU_NOTIFY_CODE1     0x80 | 
|  |  | 
|  | #define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS     0x86 | 
|  | #define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS     0x87 | 
|  |  | 
|  | /* FUNC interface - command values */ | 
|  | #define FUNC_RFKILL	0x1000 | 
|  | #define FUNC_LEDS	0x1001 | 
|  | #define FUNC_BUTTONS	0x1002 | 
|  | #define FUNC_BACKLIGHT  0x1004 | 
|  |  | 
|  | /* FUNC interface - responses */ | 
|  | #define UNSUPPORTED_CMD 0x80000000 | 
|  |  | 
|  | #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) | 
|  | /* FUNC interface - LED control */ | 
|  | #define FUNC_LED_OFF	0x1 | 
|  | #define FUNC_LED_ON	0x30001 | 
|  | #define KEYBOARD_LAMPS	0x100 | 
|  | #define LOGOLAMP_POWERON 0x2000 | 
|  | #define LOGOLAMP_ALWAYS  0x4000 | 
|  | #endif | 
|  |  | 
|  | /* Hotkey details */ | 
|  | #define KEY1_CODE	0x410	/* codes for the keys in the GIRB register */ | 
|  | #define KEY2_CODE	0x411 | 
|  | #define KEY3_CODE	0x412 | 
|  | #define KEY4_CODE	0x413 | 
|  |  | 
|  | #define MAX_HOTKEY_RINGBUFFER_SIZE 100 | 
|  | #define RINGBUFFERSIZE 40 | 
|  |  | 
|  | /* Debugging */ | 
|  | #define FUJLAPTOP_LOG	   ACPI_FUJITSU_HID ": " | 
|  | #define FUJLAPTOP_ERR	   KERN_ERR FUJLAPTOP_LOG | 
|  | #define FUJLAPTOP_NOTICE   KERN_NOTICE FUJLAPTOP_LOG | 
|  | #define FUJLAPTOP_INFO	   KERN_INFO FUJLAPTOP_LOG | 
|  | #define FUJLAPTOP_DEBUG    KERN_DEBUG FUJLAPTOP_LOG | 
|  |  | 
|  | #define FUJLAPTOP_DBG_ALL	  0xffff | 
|  | #define FUJLAPTOP_DBG_ERROR	  0x0001 | 
|  | #define FUJLAPTOP_DBG_WARN	  0x0002 | 
|  | #define FUJLAPTOP_DBG_INFO	  0x0004 | 
|  | #define FUJLAPTOP_DBG_TRACE	  0x0008 | 
|  |  | 
|  | #define dbg_printk(a_dbg_level, format, arg...) \ | 
|  | do { if (dbg_level & a_dbg_level) \ | 
|  | printk(FUJLAPTOP_DEBUG "%s: " format, __func__ , ## arg); \ | 
|  | } while (0) | 
|  | #ifdef CONFIG_FUJITSU_LAPTOP_DEBUG | 
|  | #define vdbg_printk(a_dbg_level, format, arg...) \ | 
|  | dbg_printk(a_dbg_level, format, ## arg) | 
|  | #else | 
|  | #define vdbg_printk(a_dbg_level, format, arg...) | 
|  | #endif | 
|  |  | 
|  | /* Device controlling the backlight and associated keys */ | 
|  | struct fujitsu_t { | 
|  | acpi_handle acpi_handle; | 
|  | struct acpi_device *dev; | 
|  | struct input_dev *input; | 
|  | char phys[32]; | 
|  | struct backlight_device *bl_device; | 
|  | struct platform_device *pf_device; | 
|  | int keycode1, keycode2, keycode3, keycode4; | 
|  |  | 
|  | unsigned int max_brightness; | 
|  | unsigned int brightness_changed; | 
|  | unsigned int brightness_level; | 
|  | }; | 
|  |  | 
|  | static struct fujitsu_t *fujitsu; | 
|  | static int use_alt_lcd_levels = -1; | 
|  | static int disable_brightness_adjust = -1; | 
|  |  | 
|  | /* Device used to access other hotkeys on the laptop */ | 
|  | struct fujitsu_hotkey_t { | 
|  | acpi_handle acpi_handle; | 
|  | struct acpi_device *dev; | 
|  | struct input_dev *input; | 
|  | char phys[32]; | 
|  | struct platform_device *pf_device; | 
|  | struct kfifo fifo; | 
|  | spinlock_t fifo_lock; | 
|  | int rfkill_supported; | 
|  | int rfkill_state; | 
|  | int logolamp_registered; | 
|  | int kblamps_registered; | 
|  | }; | 
|  |  | 
|  | static struct fujitsu_hotkey_t *fujitsu_hotkey; | 
|  |  | 
|  | static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event); | 
|  |  | 
|  | #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) | 
|  | static enum led_brightness logolamp_get(struct led_classdev *cdev); | 
|  | static void logolamp_set(struct led_classdev *cdev, | 
|  | enum led_brightness brightness); | 
|  |  | 
|  | static struct led_classdev logolamp_led = { | 
|  | .name = "fujitsu::logolamp", | 
|  | .brightness_get = logolamp_get, | 
|  | .brightness_set = logolamp_set | 
|  | }; | 
|  |  | 
|  | static enum led_brightness kblamps_get(struct led_classdev *cdev); | 
|  | static void kblamps_set(struct led_classdev *cdev, | 
|  | enum led_brightness brightness); | 
|  |  | 
|  | static struct led_classdev kblamps_led = { | 
|  | .name = "fujitsu::kblamps", | 
|  | .brightness_get = kblamps_get, | 
|  | .brightness_set = kblamps_set | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_FUJITSU_LAPTOP_DEBUG | 
|  | static u32 dbg_level = 0x03; | 
|  | #endif | 
|  |  | 
|  | static void acpi_fujitsu_notify(struct acpi_device *device, u32 event); | 
|  |  | 
|  | /* Fujitsu ACPI interface function */ | 
|  |  | 
|  | static int call_fext_func(int cmd, int arg0, int arg1, int arg2) | 
|  | { | 
|  | acpi_status status = AE_OK; | 
|  | union acpi_object params[4] = { | 
|  | { .type = ACPI_TYPE_INTEGER }, | 
|  | { .type = ACPI_TYPE_INTEGER }, | 
|  | { .type = ACPI_TYPE_INTEGER }, | 
|  | { .type = ACPI_TYPE_INTEGER } | 
|  | }; | 
|  | struct acpi_object_list arg_list = { 4, ¶ms[0] }; | 
|  | unsigned long long value; | 
|  | acpi_handle handle = NULL; | 
|  |  | 
|  | status = acpi_get_handle(fujitsu_hotkey->acpi_handle, "FUNC", &handle); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | vdbg_printk(FUJLAPTOP_DBG_ERROR, | 
|  | "FUNC interface is not present\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | params[0].integer.value = cmd; | 
|  | params[1].integer.value = arg0; | 
|  | params[2].integer.value = arg1; | 
|  | params[3].integer.value = arg2; | 
|  |  | 
|  | status = acpi_evaluate_integer(handle, NULL, &arg_list, &value); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | vdbg_printk(FUJLAPTOP_DBG_WARN, | 
|  | "FUNC 0x%x (args 0x%x, 0x%x, 0x%x) call failed\n", | 
|  | cmd, arg0, arg1, arg2); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, | 
|  | "FUNC 0x%x (args 0x%x, 0x%x, 0x%x) returned 0x%x\n", | 
|  | cmd, arg0, arg1, arg2, (int)value); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) | 
|  | /* LED class callbacks */ | 
|  |  | 
|  | static void logolamp_set(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | if (brightness >= LED_FULL) { | 
|  | call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON); | 
|  | call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_ON); | 
|  | } else if (brightness >= LED_HALF) { | 
|  | call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_ON); | 
|  | call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, FUNC_LED_OFF); | 
|  | } else { | 
|  | call_fext_func(FUNC_LEDS, 0x1, LOGOLAMP_POWERON, FUNC_LED_OFF); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void kblamps_set(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | if (brightness >= LED_FULL) | 
|  | call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_ON); | 
|  | else | 
|  | call_fext_func(FUNC_LEDS, 0x1, KEYBOARD_LAMPS, FUNC_LED_OFF); | 
|  | } | 
|  |  | 
|  | static enum led_brightness logolamp_get(struct led_classdev *cdev) | 
|  | { | 
|  | enum led_brightness brightness = LED_OFF; | 
|  | int poweron, always; | 
|  |  | 
|  | poweron = call_fext_func(FUNC_LEDS, 0x2, LOGOLAMP_POWERON, 0x0); | 
|  | if (poweron == FUNC_LED_ON) { | 
|  | brightness = LED_HALF; | 
|  | always = call_fext_func(FUNC_LEDS, 0x2, LOGOLAMP_ALWAYS, 0x0); | 
|  | if (always == FUNC_LED_ON) | 
|  | brightness = LED_FULL; | 
|  | } | 
|  | return brightness; | 
|  | } | 
|  |  | 
|  | static enum led_brightness kblamps_get(struct led_classdev *cdev) | 
|  | { | 
|  | enum led_brightness brightness = LED_OFF; | 
|  |  | 
|  | if (call_fext_func(FUNC_LEDS, 0x2, KEYBOARD_LAMPS, 0x0) == FUNC_LED_ON) | 
|  | brightness = LED_FULL; | 
|  |  | 
|  | return brightness; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* Hardware access for LCD brightness control */ | 
|  |  | 
|  | static int set_lcd_level(int level) | 
|  | { | 
|  | acpi_status status = AE_OK; | 
|  | acpi_handle handle = NULL; | 
|  |  | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBLL [%d]\n", | 
|  | level); | 
|  |  | 
|  | if (level < 0 || level >= fujitsu->max_brightness) | 
|  | return -EINVAL; | 
|  |  | 
|  | status = acpi_get_handle(fujitsu->acpi_handle, "SBLL", &handle); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBLL not present\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  |  | 
|  | status = acpi_execute_simple_method(handle, NULL, level); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -ENODEV; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int set_lcd_level_alt(int level) | 
|  | { | 
|  | acpi_status status = AE_OK; | 
|  | acpi_handle handle = NULL; | 
|  |  | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBL2 [%d]\n", | 
|  | level); | 
|  |  | 
|  | if (level < 0 || level >= fujitsu->max_brightness) | 
|  | return -EINVAL; | 
|  |  | 
|  | status = acpi_get_handle(fujitsu->acpi_handle, "SBL2", &handle); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBL2 not present\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | status = acpi_execute_simple_method(handle, NULL, level); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -ENODEV; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int get_lcd_level(void) | 
|  | { | 
|  | unsigned long long state = 0; | 
|  | acpi_status status = AE_OK; | 
|  |  | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, "get lcd level via GBLL\n"); | 
|  |  | 
|  | status = | 
|  | acpi_evaluate_integer(fujitsu->acpi_handle, "GBLL", NULL, &state); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return 0; | 
|  |  | 
|  | fujitsu->brightness_level = state & 0x0fffffff; | 
|  |  | 
|  | if (state & 0x80000000) | 
|  | fujitsu->brightness_changed = 1; | 
|  | else | 
|  | fujitsu->brightness_changed = 0; | 
|  |  | 
|  | return fujitsu->brightness_level; | 
|  | } | 
|  |  | 
|  | static int get_max_brightness(void) | 
|  | { | 
|  | unsigned long long state = 0; | 
|  | acpi_status status = AE_OK; | 
|  |  | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, "get max lcd level via RBLL\n"); | 
|  |  | 
|  | status = | 
|  | acpi_evaluate_integer(fujitsu->acpi_handle, "RBLL", NULL, &state); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -1; | 
|  |  | 
|  | fujitsu->max_brightness = state; | 
|  |  | 
|  | return fujitsu->max_brightness; | 
|  | } | 
|  |  | 
|  | /* Backlight device stuff */ | 
|  |  | 
|  | static int bl_get_brightness(struct backlight_device *b) | 
|  | { | 
|  | return get_lcd_level(); | 
|  | } | 
|  |  | 
|  | static int bl_update_status(struct backlight_device *b) | 
|  | { | 
|  | int ret; | 
|  | if (b->props.power == 4) | 
|  | ret = call_fext_func(FUNC_BACKLIGHT, 0x1, 0x4, 0x3); | 
|  | else | 
|  | ret = call_fext_func(FUNC_BACKLIGHT, 0x1, 0x4, 0x0); | 
|  | if (ret != 0) | 
|  | vdbg_printk(FUJLAPTOP_DBG_ERROR, | 
|  | "Unable to adjust backlight power, error code %i\n", | 
|  | ret); | 
|  |  | 
|  | if (use_alt_lcd_levels) | 
|  | ret = set_lcd_level_alt(b->props.brightness); | 
|  | else | 
|  | ret = set_lcd_level(b->props.brightness); | 
|  | if (ret != 0) | 
|  | vdbg_printk(FUJLAPTOP_DBG_ERROR, | 
|  | "Unable to adjust LCD brightness, error code %i\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct backlight_ops fujitsubl_ops = { | 
|  | .get_brightness = bl_get_brightness, | 
|  | .update_status = bl_update_status, | 
|  | }; | 
|  |  | 
|  | /* Platform LCD brightness device */ | 
|  |  | 
|  | static ssize_t | 
|  | show_max_brightness(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  |  | 
|  | int ret; | 
|  |  | 
|  | ret = get_max_brightness(); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%i\n", ret); | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | show_brightness_changed(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  |  | 
|  | int ret; | 
|  |  | 
|  | ret = fujitsu->brightness_changed; | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%i\n", ret); | 
|  | } | 
|  |  | 
|  | static ssize_t show_lcd_level(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  |  | 
|  | int ret; | 
|  |  | 
|  | ret = get_lcd_level(); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%i\n", ret); | 
|  | } | 
|  |  | 
|  | static ssize_t store_lcd_level(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, | 
|  | size_t count) | 
|  | { | 
|  |  | 
|  | int level, ret; | 
|  |  | 
|  | if (sscanf(buf, "%i", &level) != 1 | 
|  | || (level < 0 || level >= fujitsu->max_brightness)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (use_alt_lcd_levels) | 
|  | ret = set_lcd_level_alt(level); | 
|  | else | 
|  | ret = set_lcd_level(level); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = get_lcd_level(); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | ignore_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | show_lid_state(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | if (!(fujitsu_hotkey->rfkill_supported & 0x100)) | 
|  | return sprintf(buf, "unknown\n"); | 
|  | if (fujitsu_hotkey->rfkill_state & 0x100) | 
|  | return sprintf(buf, "open\n"); | 
|  | else | 
|  | return sprintf(buf, "closed\n"); | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | show_dock_state(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | if (!(fujitsu_hotkey->rfkill_supported & 0x200)) | 
|  | return sprintf(buf, "unknown\n"); | 
|  | if (fujitsu_hotkey->rfkill_state & 0x200) | 
|  | return sprintf(buf, "docked\n"); | 
|  | else | 
|  | return sprintf(buf, "undocked\n"); | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | show_radios_state(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | if (!(fujitsu_hotkey->rfkill_supported & 0x20)) | 
|  | return sprintf(buf, "unknown\n"); | 
|  | if (fujitsu_hotkey->rfkill_state & 0x20) | 
|  | return sprintf(buf, "on\n"); | 
|  | else | 
|  | return sprintf(buf, "killed\n"); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(max_brightness, 0444, show_max_brightness, ignore_store); | 
|  | static DEVICE_ATTR(brightness_changed, 0444, show_brightness_changed, | 
|  | ignore_store); | 
|  | static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level); | 
|  | static DEVICE_ATTR(lid, 0444, show_lid_state, ignore_store); | 
|  | static DEVICE_ATTR(dock, 0444, show_dock_state, ignore_store); | 
|  | static DEVICE_ATTR(radios, 0444, show_radios_state, ignore_store); | 
|  |  | 
|  | static struct attribute *fujitsupf_attributes[] = { | 
|  | &dev_attr_brightness_changed.attr, | 
|  | &dev_attr_max_brightness.attr, | 
|  | &dev_attr_lcd_level.attr, | 
|  | &dev_attr_lid.attr, | 
|  | &dev_attr_dock.attr, | 
|  | &dev_attr_radios.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct attribute_group fujitsupf_attribute_group = { | 
|  | .attrs = fujitsupf_attributes | 
|  | }; | 
|  |  | 
|  | static struct platform_driver fujitsupf_driver = { | 
|  | .driver = { | 
|  | .name = "fujitsu-laptop", | 
|  | .owner = THIS_MODULE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static void dmi_check_cb_common(const struct dmi_system_id *id) | 
|  | { | 
|  | pr_info("Identified laptop model '%s'\n", id->ident); | 
|  | if (use_alt_lcd_levels == -1) { | 
|  | if (acpi_has_method(NULL, | 
|  | "\\_SB.PCI0.LPCB.FJEX.SBL2")) | 
|  | use_alt_lcd_levels = 1; | 
|  | else | 
|  | use_alt_lcd_levels = 0; | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, "auto-detected usealt as " | 
|  | "%i\n", use_alt_lcd_levels); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int dmi_check_cb_s6410(const struct dmi_system_id *id) | 
|  | { | 
|  | dmi_check_cb_common(id); | 
|  | fujitsu->keycode1 = KEY_SCREENLOCK;	/* "Lock" */ | 
|  | fujitsu->keycode2 = KEY_HELP;	/* "Mobility Center" */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int dmi_check_cb_s6420(const struct dmi_system_id *id) | 
|  | { | 
|  | dmi_check_cb_common(id); | 
|  | fujitsu->keycode1 = KEY_SCREENLOCK;	/* "Lock" */ | 
|  | fujitsu->keycode2 = KEY_HELP;	/* "Mobility Center" */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int dmi_check_cb_p8010(const struct dmi_system_id *id) | 
|  | { | 
|  | dmi_check_cb_common(id); | 
|  | fujitsu->keycode1 = KEY_HELP;	/* "Support" */ | 
|  | fujitsu->keycode3 = KEY_SWITCHVIDEOMODE;	/* "Presentation" */ | 
|  | fujitsu->keycode4 = KEY_WWW;	/* "Internet" */ | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static struct dmi_system_id fujitsu_dmi_table[] = { | 
|  | { | 
|  | .ident = "Fujitsu Siemens S6410", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), | 
|  | }, | 
|  | .callback = dmi_check_cb_s6410}, | 
|  | { | 
|  | .ident = "Fujitsu Siemens S6420", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), | 
|  | }, | 
|  | .callback = dmi_check_cb_s6420}, | 
|  | { | 
|  | .ident = "Fujitsu LifeBook P8010", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"), | 
|  | }, | 
|  | .callback = dmi_check_cb_p8010}, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | /* ACPI device for LCD brightness control */ | 
|  |  | 
|  | static int acpi_fujitsu_add(struct acpi_device *device) | 
|  | { | 
|  | int result = 0; | 
|  | int state = 0; | 
|  | struct input_dev *input; | 
|  | int error; | 
|  |  | 
|  | if (!device) | 
|  | return -EINVAL; | 
|  |  | 
|  | fujitsu->acpi_handle = device->handle; | 
|  | sprintf(acpi_device_name(device), "%s", ACPI_FUJITSU_DEVICE_NAME); | 
|  | sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); | 
|  | device->driver_data = fujitsu; | 
|  |  | 
|  | fujitsu->input = input = input_allocate_device(); | 
|  | if (!input) { | 
|  | error = -ENOMEM; | 
|  | goto err_stop; | 
|  | } | 
|  |  | 
|  | snprintf(fujitsu->phys, sizeof(fujitsu->phys), | 
|  | "%s/video/input0", acpi_device_hid(device)); | 
|  |  | 
|  | input->name = acpi_device_name(device); | 
|  | input->phys = fujitsu->phys; | 
|  | input->id.bustype = BUS_HOST; | 
|  | input->id.product = 0x06; | 
|  | input->dev.parent = &device->dev; | 
|  | input->evbit[0] = BIT(EV_KEY); | 
|  | set_bit(KEY_BRIGHTNESSUP, input->keybit); | 
|  | set_bit(KEY_BRIGHTNESSDOWN, input->keybit); | 
|  | set_bit(KEY_UNKNOWN, input->keybit); | 
|  |  | 
|  | error = input_register_device(input); | 
|  | if (error) | 
|  | goto err_free_input_dev; | 
|  |  | 
|  | result = acpi_bus_update_power(fujitsu->acpi_handle, &state); | 
|  | if (result) { | 
|  | pr_err("Error reading power state\n"); | 
|  | goto err_unregister_input_dev; | 
|  | } | 
|  |  | 
|  | pr_info("ACPI: %s [%s] (%s)\n", | 
|  | acpi_device_name(device), acpi_device_bid(device), | 
|  | !device->power.state ? "on" : "off"); | 
|  |  | 
|  | fujitsu->dev = device; | 
|  |  | 
|  | if (acpi_has_method(device->handle, METHOD_NAME__INI)) { | 
|  | vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n"); | 
|  | if (ACPI_FAILURE | 
|  | (acpi_evaluate_object | 
|  | (device->handle, METHOD_NAME__INI, NULL, NULL))) | 
|  | pr_err("_INI Method failed\n"); | 
|  | } | 
|  |  | 
|  | /* do config (detect defaults) */ | 
|  | use_alt_lcd_levels = use_alt_lcd_levels == 1 ? 1 : 0; | 
|  | disable_brightness_adjust = disable_brightness_adjust == 1 ? 1 : 0; | 
|  | vdbg_printk(FUJLAPTOP_DBG_INFO, | 
|  | "config: [alt interface: %d], [adjust disable: %d]\n", | 
|  | use_alt_lcd_levels, disable_brightness_adjust); | 
|  |  | 
|  | if (get_max_brightness() <= 0) | 
|  | fujitsu->max_brightness = FUJITSU_LCD_N_LEVELS; | 
|  | get_lcd_level(); | 
|  |  | 
|  | return result; | 
|  |  | 
|  | err_unregister_input_dev: | 
|  | input_unregister_device(input); | 
|  | input = NULL; | 
|  | err_free_input_dev: | 
|  | input_free_device(input); | 
|  | err_stop: | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_fujitsu_remove(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_t *fujitsu = acpi_driver_data(device); | 
|  | struct input_dev *input = fujitsu->input; | 
|  |  | 
|  | input_unregister_device(input); | 
|  |  | 
|  | fujitsu->acpi_handle = NULL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Brightness notify */ | 
|  |  | 
|  | static void acpi_fujitsu_notify(struct acpi_device *device, u32 event) | 
|  | { | 
|  | struct input_dev *input; | 
|  | int keycode; | 
|  | int oldb, newb; | 
|  |  | 
|  | input = fujitsu->input; | 
|  |  | 
|  | switch (event) { | 
|  | case ACPI_FUJITSU_NOTIFY_CODE1: | 
|  | keycode = 0; | 
|  | oldb = fujitsu->brightness_level; | 
|  | get_lcd_level(); | 
|  | newb = fujitsu->brightness_level; | 
|  |  | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, | 
|  | "brightness button event [%i -> %i (%i)]\n", | 
|  | oldb, newb, fujitsu->brightness_changed); | 
|  |  | 
|  | if (oldb < newb) { | 
|  | if (disable_brightness_adjust != 1) { | 
|  | if (use_alt_lcd_levels) | 
|  | set_lcd_level_alt(newb); | 
|  | else | 
|  | set_lcd_level(newb); | 
|  | } | 
|  | keycode = KEY_BRIGHTNESSUP; | 
|  | } else if (oldb > newb) { | 
|  | if (disable_brightness_adjust != 1) { | 
|  | if (use_alt_lcd_levels) | 
|  | set_lcd_level_alt(newb); | 
|  | else | 
|  | set_lcd_level(newb); | 
|  | } | 
|  | keycode = KEY_BRIGHTNESSDOWN; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | keycode = KEY_UNKNOWN; | 
|  | vdbg_printk(FUJLAPTOP_DBG_WARN, | 
|  | "unsupported event [0x%x]\n", event); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (keycode != 0) { | 
|  | input_report_key(input, keycode, 1); | 
|  | input_sync(input); | 
|  | input_report_key(input, keycode, 0); | 
|  | input_sync(input); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* ACPI device for hotkey handling */ | 
|  |  | 
|  | static int acpi_fujitsu_hotkey_add(struct acpi_device *device) | 
|  | { | 
|  | int result = 0; | 
|  | int state = 0; | 
|  | struct input_dev *input; | 
|  | int error; | 
|  | int i; | 
|  |  | 
|  | if (!device) | 
|  | return -EINVAL; | 
|  |  | 
|  | fujitsu_hotkey->acpi_handle = device->handle; | 
|  | sprintf(acpi_device_name(device), "%s", | 
|  | ACPI_FUJITSU_HOTKEY_DEVICE_NAME); | 
|  | sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); | 
|  | device->driver_data = fujitsu_hotkey; | 
|  |  | 
|  | /* kfifo */ | 
|  | spin_lock_init(&fujitsu_hotkey->fifo_lock); | 
|  | error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int), | 
|  | GFP_KERNEL); | 
|  | if (error) { | 
|  | pr_err("kfifo_alloc failed\n"); | 
|  | goto err_stop; | 
|  | } | 
|  |  | 
|  | fujitsu_hotkey->input = input = input_allocate_device(); | 
|  | if (!input) { | 
|  | error = -ENOMEM; | 
|  | goto err_free_fifo; | 
|  | } | 
|  |  | 
|  | snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys), | 
|  | "%s/video/input0", acpi_device_hid(device)); | 
|  |  | 
|  | input->name = acpi_device_name(device); | 
|  | input->phys = fujitsu_hotkey->phys; | 
|  | input->id.bustype = BUS_HOST; | 
|  | input->id.product = 0x06; | 
|  | input->dev.parent = &device->dev; | 
|  |  | 
|  | set_bit(EV_KEY, input->evbit); | 
|  | set_bit(fujitsu->keycode1, input->keybit); | 
|  | set_bit(fujitsu->keycode2, input->keybit); | 
|  | set_bit(fujitsu->keycode3, input->keybit); | 
|  | set_bit(fujitsu->keycode4, input->keybit); | 
|  | set_bit(KEY_UNKNOWN, input->keybit); | 
|  |  | 
|  | error = input_register_device(input); | 
|  | if (error) | 
|  | goto err_free_input_dev; | 
|  |  | 
|  | result = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state); | 
|  | if (result) { | 
|  | pr_err("Error reading power state\n"); | 
|  | goto err_unregister_input_dev; | 
|  | } | 
|  |  | 
|  | pr_info("ACPI: %s [%s] (%s)\n", | 
|  | acpi_device_name(device), acpi_device_bid(device), | 
|  | !device->power.state ? "on" : "off"); | 
|  |  | 
|  | fujitsu_hotkey->dev = device; | 
|  |  | 
|  | if (acpi_has_method(device->handle, METHOD_NAME__INI)) { | 
|  | vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n"); | 
|  | if (ACPI_FAILURE | 
|  | (acpi_evaluate_object | 
|  | (device->handle, METHOD_NAME__INI, NULL, NULL))) | 
|  | pr_err("_INI Method failed\n"); | 
|  | } | 
|  |  | 
|  | i = 0; | 
|  | while (call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0) != 0 | 
|  | && (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) | 
|  | ; /* No action, result is discarded */ | 
|  | vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i); | 
|  |  | 
|  | fujitsu_hotkey->rfkill_supported = | 
|  | call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0); | 
|  |  | 
|  | /* Make sure our bitmask of supported functions is cleared if the | 
|  | RFKILL function block is not implemented, like on the S7020. */ | 
|  | if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD) | 
|  | fujitsu_hotkey->rfkill_supported = 0; | 
|  |  | 
|  | if (fujitsu_hotkey->rfkill_supported) | 
|  | fujitsu_hotkey->rfkill_state = | 
|  | call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); | 
|  |  | 
|  | /* Suspect this is a keymap of the application panel, print it */ | 
|  | pr_info("BTNI: [0x%x]\n", call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0)); | 
|  |  | 
|  | #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) | 
|  | if (call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) { | 
|  | result = led_classdev_register(&fujitsu->pf_device->dev, | 
|  | &logolamp_led); | 
|  | if (result == 0) { | 
|  | fujitsu_hotkey->logolamp_registered = 1; | 
|  | } else { | 
|  | pr_err("Could not register LED handler for logo lamp, error %i\n", | 
|  | result); | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) && | 
|  | (call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) { | 
|  | result = led_classdev_register(&fujitsu->pf_device->dev, | 
|  | &kblamps_led); | 
|  | if (result == 0) { | 
|  | fujitsu_hotkey->kblamps_registered = 1; | 
|  | } else { | 
|  | pr_err("Could not register LED handler for keyboard lamps, error %i\n", | 
|  | result); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return result; | 
|  |  | 
|  | err_unregister_input_dev: | 
|  | input_unregister_device(input); | 
|  | input = NULL; | 
|  | err_free_input_dev: | 
|  | input_free_device(input); | 
|  | err_free_fifo: | 
|  | kfifo_free(&fujitsu_hotkey->fifo); | 
|  | err_stop: | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_fujitsu_hotkey_remove(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device); | 
|  | struct input_dev *input = fujitsu_hotkey->input; | 
|  |  | 
|  | #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) | 
|  | if (fujitsu_hotkey->logolamp_registered) | 
|  | led_classdev_unregister(&logolamp_led); | 
|  |  | 
|  | if (fujitsu_hotkey->kblamps_registered) | 
|  | led_classdev_unregister(&kblamps_led); | 
|  | #endif | 
|  |  | 
|  | input_unregister_device(input); | 
|  |  | 
|  | kfifo_free(&fujitsu_hotkey->fifo); | 
|  |  | 
|  | fujitsu_hotkey->acpi_handle = NULL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) | 
|  | { | 
|  | struct input_dev *input; | 
|  | int keycode, keycode_r; | 
|  | unsigned int irb = 1; | 
|  | int i, status; | 
|  |  | 
|  | input = fujitsu_hotkey->input; | 
|  |  | 
|  | if (fujitsu_hotkey->rfkill_supported) | 
|  | fujitsu_hotkey->rfkill_state = | 
|  | call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); | 
|  |  | 
|  | switch (event) { | 
|  | case ACPI_FUJITSU_NOTIFY_CODE1: | 
|  | i = 0; | 
|  | while ((irb = | 
|  | call_fext_func(FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0 | 
|  | && (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) { | 
|  | switch (irb & 0x4ff) { | 
|  | case KEY1_CODE: | 
|  | keycode = fujitsu->keycode1; | 
|  | break; | 
|  | case KEY2_CODE: | 
|  | keycode = fujitsu->keycode2; | 
|  | break; | 
|  | case KEY3_CODE: | 
|  | keycode = fujitsu->keycode3; | 
|  | break; | 
|  | case KEY4_CODE: | 
|  | keycode = fujitsu->keycode4; | 
|  | break; | 
|  | case 0: | 
|  | keycode = 0; | 
|  | break; | 
|  | default: | 
|  | vdbg_printk(FUJLAPTOP_DBG_WARN, | 
|  | "Unknown GIRB result [%x]\n", irb); | 
|  | keycode = -1; | 
|  | break; | 
|  | } | 
|  | if (keycode > 0) { | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, | 
|  | "Push keycode into ringbuffer [%d]\n", | 
|  | keycode); | 
|  | status = kfifo_in_locked(&fujitsu_hotkey->fifo, | 
|  | (unsigned char *)&keycode, | 
|  | sizeof(keycode), | 
|  | &fujitsu_hotkey->fifo_lock); | 
|  | if (status != sizeof(keycode)) { | 
|  | vdbg_printk(FUJLAPTOP_DBG_WARN, | 
|  | "Could not push keycode [0x%x]\n", | 
|  | keycode); | 
|  | } else { | 
|  | input_report_key(input, keycode, 1); | 
|  | input_sync(input); | 
|  | } | 
|  | } else if (keycode == 0) { | 
|  | while ((status = | 
|  | kfifo_out_locked( | 
|  | &fujitsu_hotkey->fifo, | 
|  | (unsigned char *) &keycode_r, | 
|  | sizeof(keycode_r), | 
|  | &fujitsu_hotkey->fifo_lock)) | 
|  | == sizeof(keycode_r)) { | 
|  | input_report_key(input, keycode_r, 0); | 
|  | input_sync(input); | 
|  | vdbg_printk(FUJLAPTOP_DBG_TRACE, | 
|  | "Pop keycode from ringbuffer [%d]\n", | 
|  | keycode_r); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | break; | 
|  | default: | 
|  | keycode = KEY_UNKNOWN; | 
|  | vdbg_printk(FUJLAPTOP_DBG_WARN, | 
|  | "Unsupported event [0x%x]\n", event); | 
|  | input_report_key(input, keycode, 1); | 
|  | input_sync(input); | 
|  | input_report_key(input, keycode, 0); | 
|  | input_sync(input); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Initialization */ | 
|  |  | 
|  | static const struct acpi_device_id fujitsu_device_ids[] = { | 
|  | {ACPI_FUJITSU_HID, 0}, | 
|  | {"", 0}, | 
|  | }; | 
|  |  | 
|  | static struct acpi_driver acpi_fujitsu_driver = { | 
|  | .name = ACPI_FUJITSU_DRIVER_NAME, | 
|  | .class = ACPI_FUJITSU_CLASS, | 
|  | .ids = fujitsu_device_ids, | 
|  | .ops = { | 
|  | .add = acpi_fujitsu_add, | 
|  | .remove = acpi_fujitsu_remove, | 
|  | .notify = acpi_fujitsu_notify, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_device_id fujitsu_hotkey_device_ids[] = { | 
|  | {ACPI_FUJITSU_HOTKEY_HID, 0}, | 
|  | {"", 0}, | 
|  | }; | 
|  |  | 
|  | static struct acpi_driver acpi_fujitsu_hotkey_driver = { | 
|  | .name = ACPI_FUJITSU_HOTKEY_DRIVER_NAME, | 
|  | .class = ACPI_FUJITSU_CLASS, | 
|  | .ids = fujitsu_hotkey_device_ids, | 
|  | .ops = { | 
|  | .add = acpi_fujitsu_hotkey_add, | 
|  | .remove = acpi_fujitsu_hotkey_remove, | 
|  | .notify = acpi_fujitsu_hotkey_notify, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init fujitsu_init(void) | 
|  | { | 
|  | int ret, result, max_brightness; | 
|  |  | 
|  | if (acpi_disabled) | 
|  | return -ENODEV; | 
|  |  | 
|  | fujitsu = kzalloc(sizeof(struct fujitsu_t), GFP_KERNEL); | 
|  | if (!fujitsu) | 
|  | return -ENOMEM; | 
|  | fujitsu->keycode1 = KEY_PROG1; | 
|  | fujitsu->keycode2 = KEY_PROG2; | 
|  | fujitsu->keycode3 = KEY_PROG3; | 
|  | fujitsu->keycode4 = KEY_PROG4; | 
|  | dmi_check_system(fujitsu_dmi_table); | 
|  |  | 
|  | result = acpi_bus_register_driver(&acpi_fujitsu_driver); | 
|  | if (result < 0) { | 
|  | ret = -ENODEV; | 
|  | goto fail_acpi; | 
|  | } | 
|  |  | 
|  | /* Register platform stuff */ | 
|  |  | 
|  | fujitsu->pf_device = platform_device_alloc("fujitsu-laptop", -1); | 
|  | if (!fujitsu->pf_device) { | 
|  | ret = -ENOMEM; | 
|  | goto fail_platform_driver; | 
|  | } | 
|  |  | 
|  | ret = platform_device_add(fujitsu->pf_device); | 
|  | if (ret) | 
|  | goto fail_platform_device1; | 
|  |  | 
|  | ret = | 
|  | sysfs_create_group(&fujitsu->pf_device->dev.kobj, | 
|  | &fujitsupf_attribute_group); | 
|  | if (ret) | 
|  | goto fail_platform_device2; | 
|  |  | 
|  | /* Register backlight stuff */ | 
|  |  | 
|  | if (!acpi_video_backlight_support()) { | 
|  | struct backlight_properties props; | 
|  |  | 
|  | memset(&props, 0, sizeof(struct backlight_properties)); | 
|  | max_brightness = fujitsu->max_brightness; | 
|  | props.type = BACKLIGHT_PLATFORM; | 
|  | props.max_brightness = max_brightness - 1; | 
|  | fujitsu->bl_device = backlight_device_register("fujitsu-laptop", | 
|  | NULL, NULL, | 
|  | &fujitsubl_ops, | 
|  | &props); | 
|  | if (IS_ERR(fujitsu->bl_device)) { | 
|  | ret = PTR_ERR(fujitsu->bl_device); | 
|  | fujitsu->bl_device = NULL; | 
|  | goto fail_sysfs_group; | 
|  | } | 
|  | fujitsu->bl_device->props.brightness = fujitsu->brightness_level; | 
|  | } | 
|  |  | 
|  | ret = platform_driver_register(&fujitsupf_driver); | 
|  | if (ret) | 
|  | goto fail_backlight; | 
|  |  | 
|  | /* Register hotkey driver */ | 
|  |  | 
|  | fujitsu_hotkey = kzalloc(sizeof(struct fujitsu_hotkey_t), GFP_KERNEL); | 
|  | if (!fujitsu_hotkey) { | 
|  | ret = -ENOMEM; | 
|  | goto fail_hotkey; | 
|  | } | 
|  |  | 
|  | result = acpi_bus_register_driver(&acpi_fujitsu_hotkey_driver); | 
|  | if (result < 0) { | 
|  | ret = -ENODEV; | 
|  | goto fail_hotkey1; | 
|  | } | 
|  |  | 
|  | /* Sync backlight power status (needs FUJ02E3 device, hence deferred) */ | 
|  |  | 
|  | if (!acpi_video_backlight_support()) { | 
|  | if (call_fext_func(FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3) | 
|  | fujitsu->bl_device->props.power = 4; | 
|  | else | 
|  | fujitsu->bl_device->props.power = 0; | 
|  | } | 
|  |  | 
|  | pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail_hotkey1: | 
|  | kfree(fujitsu_hotkey); | 
|  | fail_hotkey: | 
|  | platform_driver_unregister(&fujitsupf_driver); | 
|  | fail_backlight: | 
|  | if (fujitsu->bl_device) | 
|  | backlight_device_unregister(fujitsu->bl_device); | 
|  | fail_sysfs_group: | 
|  | sysfs_remove_group(&fujitsu->pf_device->dev.kobj, | 
|  | &fujitsupf_attribute_group); | 
|  | fail_platform_device2: | 
|  | platform_device_del(fujitsu->pf_device); | 
|  | fail_platform_device1: | 
|  | platform_device_put(fujitsu->pf_device); | 
|  | fail_platform_driver: | 
|  | acpi_bus_unregister_driver(&acpi_fujitsu_driver); | 
|  | fail_acpi: | 
|  | kfree(fujitsu); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit fujitsu_cleanup(void) | 
|  | { | 
|  | acpi_bus_unregister_driver(&acpi_fujitsu_hotkey_driver); | 
|  |  | 
|  | kfree(fujitsu_hotkey); | 
|  |  | 
|  | platform_driver_unregister(&fujitsupf_driver); | 
|  |  | 
|  | if (fujitsu->bl_device) | 
|  | backlight_device_unregister(fujitsu->bl_device); | 
|  |  | 
|  | sysfs_remove_group(&fujitsu->pf_device->dev.kobj, | 
|  | &fujitsupf_attribute_group); | 
|  |  | 
|  | platform_device_unregister(fujitsu->pf_device); | 
|  |  | 
|  | acpi_bus_unregister_driver(&acpi_fujitsu_driver); | 
|  |  | 
|  | kfree(fujitsu); | 
|  |  | 
|  | pr_info("driver unloaded\n"); | 
|  | } | 
|  |  | 
|  | module_init(fujitsu_init); | 
|  | module_exit(fujitsu_cleanup); | 
|  |  | 
|  | module_param(use_alt_lcd_levels, uint, 0644); | 
|  | MODULE_PARM_DESC(use_alt_lcd_levels, | 
|  | "Use alternative interface for lcd_levels (needed for Lifebook s6410)."); | 
|  | module_param(disable_brightness_adjust, uint, 0644); | 
|  | MODULE_PARM_DESC(disable_brightness_adjust, "Disable brightness adjustment ."); | 
|  | #ifdef CONFIG_FUJITSU_LAPTOP_DEBUG | 
|  | module_param_named(debug, dbg_level, uint, 0644); | 
|  | MODULE_PARM_DESC(debug, "Sets debug level bit-mask"); | 
|  | #endif | 
|  |  | 
|  | MODULE_AUTHOR("Jonathan Woithe, Peter Gruber, Tony Vroon"); | 
|  | MODULE_DESCRIPTION("Fujitsu laptop extras support"); | 
|  | MODULE_VERSION(FUJITSU_DRIVER_VERSION); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1D3:*:cvrS6410:*"); | 
|  | MODULE_ALIAS("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1E6:*:cvrS6420:*"); | 
|  | MODULE_ALIAS("dmi:*:svnFUJITSU:*:pvr:rvnFUJITSU:rnFJNB19C:*:cvrS7020:*"); | 
|  |  | 
|  | static struct pnp_device_id pnp_ids[] __used = { | 
|  | {.id = "FUJ02bf"}, | 
|  | {.id = "FUJ02B1"}, | 
|  | {.id = "FUJ02E3"}, | 
|  | {.id = ""} | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pnp, pnp_ids); |