Documentation/devicetree/bindings/clock/imx27-clock.txt

* Clock bindings for Freescale i.MX27

Required properties:
- compatible: Should be "fsl,imx27-ccm"
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>

The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell.  The following is a full list of i.MX27
clocks and IDs.

	Clock		    ID
	-----------------------
	dummy                0
	ckih                 1
	ckil                 2
	mpll                 3
	spll                 4
	mpll_main2           5
	ahb                  6
	ipg                  7
	nfc_div              8
	per1_div             9
	per2_div             10
	per3_div             11
	per4_div             12
	vpu_sel              13
	vpu_div              14
	usb_div              15
	cpu_sel              16
	clko_sel             17
	cpu_div              18
	clko_div             19
	ssi1_sel             20
	ssi2_sel             21
	ssi1_div             22
	ssi2_div             23
	clko_en              24
	ssi2_ipg_gate        25
	ssi1_ipg_gate        26
	slcdc_ipg_gate       27
	sdhc3_ipg_gate       28
	sdhc2_ipg_gate       29
	sdhc1_ipg_gate       30
	scc_ipg_gate         31
	sahara_ipg_gate      32
	rtc_ipg_gate         33
	pwm_ipg_gate         34
	owire_ipg_gate       35
	lcdc_ipg_gate        36
	kpp_ipg_gate         37
	iim_ipg_gate         38
	i2c2_ipg_gate        39
	i2c1_ipg_gate        40
	gpt6_ipg_gate        41
	gpt5_ipg_gate        42
	gpt4_ipg_gate        43
	gpt3_ipg_gate        44
	gpt2_ipg_gate        45
	gpt1_ipg_gate        46
	gpio_ipg_gate        47
	fec_ipg_gate         48
	emma_ipg_gate        49
	dma_ipg_gate         50
	cspi3_ipg_gate       51
	cspi2_ipg_gate       52
	cspi1_ipg_gate       53
	nfc_baud_gate        54
	ssi2_baud_gate       55
	ssi1_baud_gate       56
	vpu_baud_gate        57
	per4_gate            58
	per3_gate            59
	per2_gate            60
	per1_gate            61
	usb_ahb_gate         62
	slcdc_ahb_gate       63
	sahara_ahb_gate      64
	lcdc_ahb_gate        65
	vpu_ahb_gate         66
	fec_ahb_gate         67
	emma_ahb_gate        68
	emi_ahb_gate         69
	dma_ahb_gate         70
	csi_ahb_gate         71
	brom_ahb_gate        72
	ata_ahb_gate         73
	wdog_ipg_gate        74
	usb_ipg_gate         75
	uart6_ipg_gate       76
	uart5_ipg_gate       77
	uart4_ipg_gate       78
	uart3_ipg_gate       79
	uart2_ipg_gate       80
	uart1_ipg_gate       81
	ckih_div1p5          82
	fpm                  83
	mpll_osc_sel         84
	mpll_sel             85
	spll_gate	     86

Examples:

clks: ccm@10027000{
	compatible = "fsl,imx27-ccm";
	reg = <0x10027000 0x1000>;
	#clock-cells = <1>;
};

uart1: serial@1000a000 {
	compatible = "fsl,imx27-uart", "fsl,imx21-uart";
	reg = <0x1000a000 0x1000>;
	interrupts = <20>;
	clocks = <&clks 81>, <&clks 61>;
	clock-names = "ipg", "per";
	status = "disabled";
};