| FLCTL NAND controller | |
| Required properties: | |
| - compatible : "renesas,shmobile-flctl-sh7372" | |
| - reg : Address range of the FLCTL | |
| - interrupts : flste IRQ number | |
| - nand-bus-width : bus width to NAND chip | |
| Optional properties: | |
| - dmas: DMA specifier(s) | |
| - dma-names: name for each DMA specifier. Valid names are | |
| "data_tx", "data_rx", "ecc_tx", "ecc_rx" | |
| The DMA fields are not used yet in the driver but are listed here for | |
| completing the bindings. | |
| The device tree may optionally contain sub-nodes describing partitions of the | |
| address space. See partition.txt for more detail. | |
| Example: | |
| flctl@e6a30000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "renesas,shmobile-flctl-sh7372"; | |
| reg = <0xe6a30000 0x100>; | |
| interrupts = <0x0d80>; | |
| nand-bus-width = <16>; | |
| dmas = <&dmac 1 /* data_tx */ | |
| &dmac 2;> /* data_rx */ | |
| dma-names = "data_tx", "data_rx"; | |
| system@0 { | |
| label = "system"; | |
| reg = <0x0 0x8000000>; | |
| }; | |
| userdata@8000000 { | |
| label = "userdata"; | |
| reg = <0x8000000 0x10000000>; | |
| }; | |
| cache@18000000 { | |
| label = "cache"; | |
| reg = <0x18000000 0x8000000>; | |
| }; | |
| }; |