| * Cadence MACB/GEM Ethernet controller | |
| Required properties: | |
| - compatible: Should be "cdns,[<chip>-]{macb|gem}" | |
| Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. | |
| Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". | |
| Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on | |
| the Cadence GEM, or the generic form: "cdns,gem". | |
| - reg: Address and length of the register set for the device | |
| - interrupts: Should contain macb interrupt | |
| - phy-mode: String, operation mode of the PHY interface. | |
| Supported values are: "mii", "rmii", "gmii", "rgmii". | |
| - clock-names: Tuple listing input clock names. | |
| Required elements: 'pclk', 'hclk' | |
| Optional elements: 'tx_clk' | |
| - clocks: Phandles to input clocks. | |
| Optional properties: | |
| - local-mac-address: 6 bytes, mac address | |
| Examples: | |
| macb0: ethernet@fffc4000 { | |
| compatible = "cdns,at32ap7000-macb"; | |
| reg = <0xfffc4000 0x4000>; | |
| interrupts = <21>; | |
| phy-mode = "rmii"; | |
| local-mac-address = [3a 0e 03 04 05 06]; | |
| clock-names = "pclk", "hclk", "tx_clk"; | |
| clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; | |
| }; |