| * Freescale IMX6 SoloLite IOMUX Controller | |
| Please refer to fsl,imx-pinctrl.txt in this directory for common binding part | |
| and usage. | |
| Required properties: | |
| - compatible: "fsl,imx6sl-iomuxc" | |
| - fsl,pins: two integers array, represents a group of pins mux and config | |
| setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a | |
| pin working on a specific function, CONFIG is the pad setting value like | |
| pull-up for this pin. Please refer to imx6sl datasheet for the valid pad | |
| config settings. | |
| CONFIG bits definition: | |
| PAD_CTL_LVE (1 << 22) | |
| PAD_CTL_HYS (1 << 16) | |
| PAD_CTL_PUS_100K_DOWN (0 << 14) | |
| PAD_CTL_PUS_47K_UP (1 << 14) | |
| PAD_CTL_PUS_100K_UP (2 << 14) | |
| PAD_CTL_PUS_22K_UP (3 << 14) | |
| PAD_CTL_PUE (1 << 13) | |
| PAD_CTL_PKE (1 << 12) | |
| PAD_CTL_ODE (1 << 11) | |
| PAD_CTL_SPEED_LOW (1 << 6) | |
| PAD_CTL_SPEED_MED (2 << 6) | |
| PAD_CTL_SPEED_HIGH (3 << 6) | |
| PAD_CTL_DSE_DISABLE (0 << 3) | |
| PAD_CTL_DSE_240ohm (1 << 3) | |
| PAD_CTL_DSE_120ohm (2 << 3) | |
| PAD_CTL_DSE_80ohm (3 << 3) | |
| PAD_CTL_DSE_60ohm (4 << 3) | |
| PAD_CTL_DSE_48ohm (5 << 3) | |
| PAD_CTL_DSE_40ohm (6 << 3) | |
| PAD_CTL_DSE_34ohm (7 << 3) | |
| PAD_CTL_SRE_FAST (1 << 0) | |
| PAD_CTL_SRE_SLOW (0 << 0) | |
| Refer to imx6sl-pinfunc.h in device tree source folder for all available | |
| imx6sl PIN_FUNC_ID. |