| Platform DesignWare HS OTG USB 2.0 controller | |
| ----------------------------------------------------- | |
| Required properties: | |
| - compatible : One of: | |
| - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. | |
| - snps,dwc2: A generic DWC2 USB controller with default parameters. | |
| - reg : Should contain 1 register range (address and length) | |
| - interrupts : Should contain 1 interrupt | |
| - clocks: clock provider specifier | |
| - clock-names: shall be "otg" | |
| Refer to clk/clock-bindings.txt for generic clock consumer properties | |
| Optional properties: | |
| - phys: phy provider specifier | |
| - phy-names: shall be "device" | |
| Refer to phy/phy-bindings.txt for generic phy consumer properties | |
| Example: | |
| usb@101c0000 { | |
| compatible = "ralink,rt3050-usb, snps,dwc2"; | |
| reg = <0x101c0000 40000>; | |
| interrupts = <18>; | |
| clocks = <&usb_otg_ahb_clk>; | |
| clock-names = "otg"; | |
| phys = <&usbphy>; | |
| phy-names = "usb2-phy"; | |
| }; |