| synopsys DWC3 CORE | |
| DWC3- USB3 CONTROLLER | |
| Required properties: | |
| - compatible: must be "snps,dwc3" | |
| - reg : Address and length of the register set for the device | |
| - interrupts: Interrupts used by the dwc3 controller. | |
| - usb-phy : array of phandle for the PHY device. The first element | |
| in the array is expected to be a handle to the USB2/HS PHY and | |
| the second element is expected to be a handle to the USB3/SS PHY | |
| Optional properties: | |
| - tx-fifo-resize: determines if the FIFO *has* to be reallocated. | |
| This is usually a subnode to DWC3 glue to which it is connected. | |
| dwc3@4a030000 { | |
| compatible = "snps,dwc3"; | |
| reg = <0x4a030000 0xcfff>; | |
| interrupts = <0 92 4> | |
| usb-phy = <&usb2_phy>, <&usb3,phy>; | |
| tx-fifo-resize; | |
| }; |