| /* MN10300 Atomic counter operations | |
| * | |
| * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. | |
| * Written by David Howells (dhowells@redhat.com) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public Licence | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the Licence, or (at your option) any later version. | |
| */ | |
| #ifndef _ASM_ATOMIC_H | |
| #define _ASM_ATOMIC_H | |
| #include <asm/irqflags.h> | |
| #include <asm/cmpxchg.h> | |
| #ifndef CONFIG_SMP | |
| #include <asm-generic/atomic.h> | |
| #else | |
| /* | |
| * Atomic operations that C can't guarantee us. Useful for | |
| * resource counting etc.. | |
| */ | |
| #define ATOMIC_INIT(i) { (i) } | |
| #ifdef __KERNEL__ | |
| /** | |
| * atomic_read - read atomic variable | |
| * @v: pointer of type atomic_t | |
| * | |
| * Atomically reads the value of @v. Note that the guaranteed | |
| * useful range of an atomic_t is only 24 bits. | |
| */ | |
| #define atomic_read(v) (ACCESS_ONCE((v)->counter)) | |
| /** | |
| * atomic_set - set atomic variable | |
| * @v: pointer of type atomic_t | |
| * @i: required value | |
| * | |
| * Atomically sets the value of @v to @i. Note that the guaranteed | |
| * useful range of an atomic_t is only 24 bits. | |
| */ | |
| #define atomic_set(v, i) (((v)->counter) = (i)) | |
| /** | |
| * atomic_add_return - add integer to atomic variable | |
| * @i: integer value to add | |
| * @v: pointer of type atomic_t | |
| * | |
| * Atomically adds @i to @v and returns the result | |
| * Note that the guaranteed useful range of an atomic_t is only 24 bits. | |
| */ | |
| static inline int atomic_add_return(int i, atomic_t *v) | |
| { | |
| int retval; | |
| #ifdef CONFIG_SMP | |
| int status; | |
| asm volatile( | |
| "1: mov %4,(_AAR,%3) \n" | |
| " mov (_ADR,%3),%1 \n" | |
| " add %5,%1 \n" | |
| " mov %1,(_ADR,%3) \n" | |
| " mov (_ADR,%3),%0 \n" /* flush */ | |
| " mov (_ASR,%3),%0 \n" | |
| " or %0,%0 \n" | |
| " bne 1b \n" | |
| : "=&r"(status), "=&r"(retval), "=m"(v->counter) | |
| : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) | |
| : "memory", "cc"); | |
| #else | |
| unsigned long flags; | |
| flags = arch_local_cli_save(); | |
| retval = v->counter; | |
| retval += i; | |
| v->counter = retval; | |
| arch_local_irq_restore(flags); | |
| #endif | |
| return retval; | |
| } | |
| /** | |
| * atomic_sub_return - subtract integer from atomic variable | |
| * @i: integer value to subtract | |
| * @v: pointer of type atomic_t | |
| * | |
| * Atomically subtracts @i from @v and returns the result | |
| * Note that the guaranteed useful range of an atomic_t is only 24 bits. | |
| */ | |
| static inline int atomic_sub_return(int i, atomic_t *v) | |
| { | |
| int retval; | |
| #ifdef CONFIG_SMP | |
| int status; | |
| asm volatile( | |
| "1: mov %4,(_AAR,%3) \n" | |
| " mov (_ADR,%3),%1 \n" | |
| " sub %5,%1 \n" | |
| " mov %1,(_ADR,%3) \n" | |
| " mov (_ADR,%3),%0 \n" /* flush */ | |
| " mov (_ASR,%3),%0 \n" | |
| " or %0,%0 \n" | |
| " bne 1b \n" | |
| : "=&r"(status), "=&r"(retval), "=m"(v->counter) | |
| : "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i) | |
| : "memory", "cc"); | |
| #else | |
| unsigned long flags; | |
| flags = arch_local_cli_save(); | |
| retval = v->counter; | |
| retval -= i; | |
| v->counter = retval; | |
| arch_local_irq_restore(flags); | |
| #endif | |
| return retval; | |
| } | |
| static inline int atomic_add_negative(int i, atomic_t *v) | |
| { | |
| return atomic_add_return(i, v) < 0; | |
| } | |
| static inline void atomic_add(int i, atomic_t *v) | |
| { | |
| atomic_add_return(i, v); | |
| } | |
| static inline void atomic_sub(int i, atomic_t *v) | |
| { | |
| atomic_sub_return(i, v); | |
| } | |
| static inline void atomic_inc(atomic_t *v) | |
| { | |
| atomic_add_return(1, v); | |
| } | |
| static inline void atomic_dec(atomic_t *v) | |
| { | |
| atomic_sub_return(1, v); | |
| } | |
| #define atomic_dec_return(v) atomic_sub_return(1, (v)) | |
| #define atomic_inc_return(v) atomic_add_return(1, (v)) | |
| #define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) | |
| #define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) | |
| #define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) | |
| #define __atomic_add_unless(v, a, u) \ | |
| ({ \ | |
| int c, old; \ | |
| c = atomic_read(v); \ | |
| while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ | |
| c = old; \ | |
| c; \ | |
| }) | |
| #define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) | |
| #define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) | |
| /** | |
| * atomic_clear_mask - Atomically clear bits in memory | |
| * @mask: Mask of the bits to be cleared | |
| * @v: pointer to word in memory | |
| * | |
| * Atomically clears the bits set in mask from the memory word specified. | |
| */ | |
| static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) | |
| { | |
| #ifdef CONFIG_SMP | |
| int status; | |
| asm volatile( | |
| "1: mov %3,(_AAR,%2) \n" | |
| " mov (_ADR,%2),%0 \n" | |
| " and %4,%0 \n" | |
| " mov %0,(_ADR,%2) \n" | |
| " mov (_ADR,%2),%0 \n" /* flush */ | |
| " mov (_ASR,%2),%0 \n" | |
| " or %0,%0 \n" | |
| " bne 1b \n" | |
| : "=&r"(status), "=m"(*addr) | |
| : "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(~mask) | |
| : "memory", "cc"); | |
| #else | |
| unsigned long flags; | |
| mask = ~mask; | |
| flags = arch_local_cli_save(); | |
| *addr &= mask; | |
| arch_local_irq_restore(flags); | |
| #endif | |
| } | |
| /** | |
| * atomic_set_mask - Atomically set bits in memory | |
| * @mask: Mask of the bits to be set | |
| * @v: pointer to word in memory | |
| * | |
| * Atomically sets the bits set in mask from the memory word specified. | |
| */ | |
| static inline void atomic_set_mask(unsigned long mask, unsigned long *addr) | |
| { | |
| #ifdef CONFIG_SMP | |
| int status; | |
| asm volatile( | |
| "1: mov %3,(_AAR,%2) \n" | |
| " mov (_ADR,%2),%0 \n" | |
| " or %4,%0 \n" | |
| " mov %0,(_ADR,%2) \n" | |
| " mov (_ADR,%2),%0 \n" /* flush */ | |
| " mov (_ASR,%2),%0 \n" | |
| " or %0,%0 \n" | |
| " bne 1b \n" | |
| : "=&r"(status), "=m"(*addr) | |
| : "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(mask) | |
| : "memory", "cc"); | |
| #else | |
| unsigned long flags; | |
| flags = arch_local_cli_save(); | |
| *addr |= mask; | |
| arch_local_irq_restore(flags); | |
| #endif | |
| } | |
| /* Atomic operations are already serializing on MN10300??? */ | |
| #define smp_mb__before_atomic_dec() barrier() | |
| #define smp_mb__after_atomic_dec() barrier() | |
| #define smp_mb__before_atomic_inc() barrier() | |
| #define smp_mb__after_atomic_inc() barrier() | |
| #endif /* __KERNEL__ */ | |
| #endif /* CONFIG_SMP */ | |
| #endif /* _ASM_ATOMIC_H */ |