| /* | |
| TDA10021 - Single Chip Cable Channel Receiver driver module | |
| used on the Siemens DVB-C cards | |
| Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de> | |
| Copyright (C) 2004 Markus Schulz <msc@antzsystem.de> | |
| Support for TDA10021 | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/string.h> | |
| #include <linux/slab.h> | |
| #include "dvb_frontend.h" | |
| #include "tda1002x.h" | |
| struct tda10021_state { | |
| struct i2c_adapter* i2c; | |
| /* configuration settings */ | |
| const struct tda1002x_config* config; | |
| struct dvb_frontend frontend; | |
| u8 pwm; | |
| u8 reg0; | |
| }; | |
| #if 0 | |
| #define dprintk(x...) printk(x) | |
| #else | |
| #define dprintk(x...) | |
| #endif | |
| static int verbose; | |
| #define XIN 57840000UL | |
| #define FIN (XIN >> 4) | |
| static int tda10021_inittab_size = 0x40; | |
| static u8 tda10021_inittab[0x40]= | |
| { | |
| 0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a, | |
| 0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40, | |
| 0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff, | |
| 0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00, | |
| 0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00, | |
| 0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58, | |
| 0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00, | |
| 0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00, | |
| }; | |
| static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data) | |
| { | |
| u8 buf[] = { reg, data }; | |
| struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; | |
| int ret; | |
| ret = i2c_transfer (state->i2c, &msg, 1); | |
| if (ret != 1) | |
| printk("DVB: TDA10021(%d): %s, writereg error " | |
| "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", | |
| state->frontend.dvb->num, __func__, reg, data, ret); | |
| msleep(10); | |
| return (ret != 1) ? -EREMOTEIO : 0; | |
| } | |
| static u8 tda10021_readreg (struct tda10021_state* state, u8 reg) | |
| { | |
| u8 b0 [] = { reg }; | |
| u8 b1 [] = { 0 }; | |
| struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, | |
| { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; | |
| int ret; | |
| ret = i2c_transfer (state->i2c, msg, 2); | |
| // Don't print an error message if the id is read. | |
| if (ret != 2 && reg != 0x1a) | |
| printk("DVB: TDA10021: %s: readreg error (ret == %i)\n", | |
| __func__, ret); | |
| return b1[0]; | |
| } | |
| //get access to tuner | |
| static int lock_tuner(struct tda10021_state* state) | |
| { | |
| u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] | 0x80 }; | |
| struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2}; | |
| if(i2c_transfer(state->i2c, &msg, 1) != 1) | |
| { | |
| printk("tda10021: lock tuner fails\n"); | |
| return -EREMOTEIO; | |
| } | |
| return 0; | |
| } | |
| //release access from tuner | |
| static int unlock_tuner(struct tda10021_state* state) | |
| { | |
| u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] & 0x7f }; | |
| struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2}; | |
| if(i2c_transfer(state->i2c, &msg_post, 1) != 1) | |
| { | |
| printk("tda10021: unlock tuner fails\n"); | |
| return -EREMOTEIO; | |
| } | |
| return 0; | |
| } | |
| static int tda10021_setup_reg0 (struct tda10021_state* state, u8 reg0, | |
| fe_spectral_inversion_t inversion) | |
| { | |
| reg0 |= state->reg0 & 0x63; | |
| if ((INVERSION_ON == inversion) ^ (state->config->invert == 0)) | |
| reg0 &= ~0x20; | |
| else | |
| reg0 |= 0x20; | |
| _tda10021_writereg (state, 0x00, reg0 & 0xfe); | |
| _tda10021_writereg (state, 0x00, reg0 | 0x01); | |
| state->reg0 = reg0; | |
| return 0; | |
| } | |
| static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate) | |
| { | |
| s32 BDR; | |
| s32 BDRI; | |
| s16 SFIL=0; | |
| u16 NDEC = 0; | |
| u32 tmp, ratio; | |
| if (symbolrate > XIN/2) | |
| symbolrate = XIN/2; | |
| if (symbolrate < 500000) | |
| symbolrate = 500000; | |
| if (symbolrate < XIN/16) NDEC = 1; | |
| if (symbolrate < XIN/32) NDEC = 2; | |
| if (symbolrate < XIN/64) NDEC = 3; | |
| if (symbolrate < (u32)(XIN/12.3)) SFIL = 1; | |
| if (symbolrate < (u32)(XIN/16)) SFIL = 0; | |
| if (symbolrate < (u32)(XIN/24.6)) SFIL = 1; | |
| if (symbolrate < (u32)(XIN/32)) SFIL = 0; | |
| if (symbolrate < (u32)(XIN/49.2)) SFIL = 1; | |
| if (symbolrate < (u32)(XIN/64)) SFIL = 0; | |
| if (symbolrate < (u32)(XIN/98.4)) SFIL = 1; | |
| symbolrate <<= NDEC; | |
| ratio = (symbolrate << 4) / FIN; | |
| tmp = ((symbolrate << 4) % FIN) << 8; | |
| ratio = (ratio << 8) + tmp / FIN; | |
| tmp = (tmp % FIN) << 8; | |
| ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, FIN); | |
| BDR = ratio; | |
| BDRI = (((XIN << 5) / symbolrate) + 1) / 2; | |
| if (BDRI > 0xFF) | |
| BDRI = 0xFF; | |
| SFIL = (SFIL << 4) | tda10021_inittab[0x0E]; | |
| NDEC = (NDEC << 6) | tda10021_inittab[0x03]; | |
| _tda10021_writereg (state, 0x03, NDEC); | |
| _tda10021_writereg (state, 0x0a, BDR&0xff); | |
| _tda10021_writereg (state, 0x0b, (BDR>> 8)&0xff); | |
| _tda10021_writereg (state, 0x0c, (BDR>>16)&0x3f); | |
| _tda10021_writereg (state, 0x0d, BDRI); | |
| _tda10021_writereg (state, 0x0e, SFIL); | |
| return 0; | |
| } | |
| static int tda10021_init (struct dvb_frontend *fe) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| int i; | |
| dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num); | |
| //_tda10021_writereg (fe, 0, 0); | |
| for (i=0; i<tda10021_inittab_size; i++) | |
| _tda10021_writereg (state, i, tda10021_inittab[i]); | |
| _tda10021_writereg (state, 0x34, state->pwm); | |
| //Comment by markus | |
| //0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0) | |
| //0x2A[4] == BYPPLL -> Power down mode (default 1) | |
| //0x2A[5] == LCK -> PLL Lock Flag | |
| //0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0) | |
| //Activate PLL | |
| _tda10021_writereg(state, 0x2a, tda10021_inittab[0x2a] & 0xef); | |
| return 0; | |
| } | |
| struct qam_params { | |
| u8 conf, agcref, lthr, mseth, aref; | |
| }; | |
| static int tda10021_set_parameters(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| u32 delsys = c->delivery_system; | |
| unsigned qam = c->modulation; | |
| bool is_annex_c; | |
| u32 reg0x3d; | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| static const struct qam_params qam_params[] = { | |
| /* Modulation Conf AGCref LTHR MSETH AREF */ | |
| [QPSK] = { 0x14, 0x78, 0x78, 0x8c, 0x96 }, | |
| [QAM_16] = { 0x00, 0x8c, 0x87, 0xa2, 0x91 }, | |
| [QAM_32] = { 0x04, 0x8c, 0x64, 0x74, 0x96 }, | |
| [QAM_64] = { 0x08, 0x6a, 0x46, 0x43, 0x6a }, | |
| [QAM_128] = { 0x0c, 0x78, 0x36, 0x34, 0x7e }, | |
| [QAM_256] = { 0x10, 0x5c, 0x26, 0x23, 0x6b }, | |
| }; | |
| switch (delsys) { | |
| case SYS_DVBC_ANNEX_A: | |
| is_annex_c = false; | |
| break; | |
| case SYS_DVBC_ANNEX_C: | |
| is_annex_c = true; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| /* | |
| * gcc optimizes the code bellow the same way as it would code: | |
| * "if (qam > 5) return -EINVAL;" | |
| * Yet, the code is clearer, as it shows what QAM standards are | |
| * supported by the driver, and avoids the usage of magic numbers on | |
| * it. | |
| */ | |
| switch (qam) { | |
| case QPSK: | |
| case QAM_16: | |
| case QAM_32: | |
| case QAM_64: | |
| case QAM_128: | |
| case QAM_256: | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (c->inversion != INVERSION_ON && c->inversion != INVERSION_OFF) | |
| return -EINVAL; | |
| /*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/ | |
| if (fe->ops.tuner_ops.set_params) { | |
| fe->ops.tuner_ops.set_params(fe); | |
| if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); | |
| } | |
| tda10021_set_symbolrate(state, c->symbol_rate); | |
| _tda10021_writereg(state, 0x34, state->pwm); | |
| _tda10021_writereg(state, 0x01, qam_params[qam].agcref); | |
| _tda10021_writereg(state, 0x05, qam_params[qam].lthr); | |
| _tda10021_writereg(state, 0x08, qam_params[qam].mseth); | |
| _tda10021_writereg(state, 0x09, qam_params[qam].aref); | |
| /* | |
| * Bit 0 == 0 means roll-off = 0.15 (Annex A) | |
| * == 1 means roll-off = 0.13 (Annex C) | |
| */ | |
| reg0x3d = tda10021_readreg (state, 0x3d); | |
| if (is_annex_c) | |
| _tda10021_writereg (state, 0x3d, 0x01 | reg0x3d); | |
| else | |
| _tda10021_writereg (state, 0x3d, 0xfe & reg0x3d); | |
| tda10021_setup_reg0(state, qam_params[qam].conf, c->inversion); | |
| return 0; | |
| } | |
| static int tda10021_read_status(struct dvb_frontend* fe, fe_status_t* status) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| int sync; | |
| *status = 0; | |
| //0x11[0] == EQALGO -> Equalizer algorithms state | |
| //0x11[1] == CARLOCK -> Carrier locked | |
| //0x11[2] == FSYNC -> Frame synchronisation | |
| //0x11[3] == FEL -> Front End locked | |
| //0x11[6] == NODVB -> DVB Mode Information | |
| sync = tda10021_readreg (state, 0x11); | |
| if (sync & 2) | |
| *status |= FE_HAS_SIGNAL|FE_HAS_CARRIER; | |
| if (sync & 4) | |
| *status |= FE_HAS_SYNC|FE_HAS_VITERBI; | |
| if (sync & 8) | |
| *status |= FE_HAS_LOCK; | |
| return 0; | |
| } | |
| static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| u32 _ber = tda10021_readreg(state, 0x14) | | |
| (tda10021_readreg(state, 0x15) << 8) | | |
| ((tda10021_readreg(state, 0x16) & 0x0f) << 16); | |
| _tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0) | |
| | (tda10021_inittab[0x10] & 0xc0)); | |
| *ber = 10 * _ber; | |
| return 0; | |
| } | |
| static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| u8 config = tda10021_readreg(state, 0x02); | |
| u8 gain = tda10021_readreg(state, 0x17); | |
| if (config & 0x02) | |
| /* the agc value is inverted */ | |
| gain = ~gain; | |
| *strength = (gain << 8) | gain; | |
| return 0; | |
| } | |
| static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| u8 quality = ~tda10021_readreg(state, 0x18); | |
| *snr = (quality << 8) | quality; | |
| return 0; | |
| } | |
| static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| *ucblocks = tda10021_readreg (state, 0x13) & 0x7f; | |
| if (*ucblocks == 0x7f) | |
| *ucblocks = 0xffffffff; | |
| /* reset uncorrected block counter */ | |
| _tda10021_writereg (state, 0x10, tda10021_inittab[0x10] & 0xdf); | |
| _tda10021_writereg (state, 0x10, tda10021_inittab[0x10]); | |
| return 0; | |
| } | |
| static int tda10021_get_frontend(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| int sync; | |
| s8 afc = 0; | |
| sync = tda10021_readreg(state, 0x11); | |
| afc = tda10021_readreg(state, 0x19); | |
| if (verbose) { | |
| /* AFC only valid when carrier has been recovered */ | |
| printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" : | |
| "DVB: TDA10021(%d): [AFC (%d) %dHz]\n", | |
| state->frontend.dvb->num, afc, | |
| -((s32)p->symbol_rate * afc) >> 10); | |
| } | |
| p->inversion = ((state->reg0 & 0x20) == 0x20) ^ (state->config->invert != 0) ? INVERSION_ON : INVERSION_OFF; | |
| p->modulation = ((state->reg0 >> 2) & 7) + QAM_16; | |
| p->fec_inner = FEC_NONE; | |
| p->frequency = ((p->frequency + 31250) / 62500) * 62500; | |
| if (sync & 2) | |
| p->frequency -= ((s32)p->symbol_rate * afc) >> 10; | |
| return 0; | |
| } | |
| static int tda10021_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| if (enable) { | |
| lock_tuner(state); | |
| } else { | |
| unlock_tuner(state); | |
| } | |
| return 0; | |
| } | |
| static int tda10021_sleep(struct dvb_frontend* fe) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| _tda10021_writereg (state, 0x1b, 0x02); /* pdown ADC */ | |
| _tda10021_writereg (state, 0x00, 0x80); /* standby */ | |
| return 0; | |
| } | |
| static void tda10021_release(struct dvb_frontend* fe) | |
| { | |
| struct tda10021_state* state = fe->demodulator_priv; | |
| kfree(state); | |
| } | |
| static struct dvb_frontend_ops tda10021_ops; | |
| struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, | |
| struct i2c_adapter* i2c, | |
| u8 pwm) | |
| { | |
| struct tda10021_state* state = NULL; | |
| u8 id; | |
| /* allocate memory for the internal state */ | |
| state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL); | |
| if (state == NULL) goto error; | |
| /* setup the state */ | |
| state->config = config; | |
| state->i2c = i2c; | |
| state->pwm = pwm; | |
| state->reg0 = tda10021_inittab[0]; | |
| /* check if the demod is there */ | |
| id = tda10021_readreg(state, 0x1a); | |
| if ((id & 0xf0) != 0x70) goto error; | |
| /* Don't claim TDA10023 */ | |
| if (id == 0x7d) | |
| goto error; | |
| printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n", | |
| state->config->demod_address, id); | |
| /* create dvb_frontend */ | |
| memcpy(&state->frontend.ops, &tda10021_ops, sizeof(struct dvb_frontend_ops)); | |
| state->frontend.demodulator_priv = state; | |
| return &state->frontend; | |
| error: | |
| kfree(state); | |
| return NULL; | |
| } | |
| static struct dvb_frontend_ops tda10021_ops = { | |
| .delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C }, | |
| .info = { | |
| .name = "Philips TDA10021 DVB-C", | |
| .frequency_stepsize = 62500, | |
| .frequency_min = 47000000, | |
| .frequency_max = 862000000, | |
| .symbol_rate_min = (XIN/2)/64, /* SACLK/64 == (XIN/2)/64 */ | |
| .symbol_rate_max = (XIN/2)/4, /* SACLK/4 */ | |
| #if 0 | |
| .frequency_tolerance = ???, | |
| .symbol_rate_tolerance = ???, /* ppm */ /* == 8% (spec p. 5) */ | |
| #endif | |
| .caps = 0x400 | //FE_CAN_QAM_4 | |
| FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | | |
| FE_CAN_QAM_128 | FE_CAN_QAM_256 | | |
| FE_CAN_FEC_AUTO | |
| }, | |
| .release = tda10021_release, | |
| .init = tda10021_init, | |
| .sleep = tda10021_sleep, | |
| .i2c_gate_ctrl = tda10021_i2c_gate_ctrl, | |
| .set_frontend = tda10021_set_parameters, | |
| .get_frontend = tda10021_get_frontend, | |
| .read_status = tda10021_read_status, | |
| .read_ber = tda10021_read_ber, | |
| .read_signal_strength = tda10021_read_signal_strength, | |
| .read_snr = tda10021_read_snr, | |
| .read_ucblocks = tda10021_read_ucblocks, | |
| }; | |
| module_param(verbose, int, 0644); | |
| MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting"); | |
| MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver"); | |
| MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz"); | |
| MODULE_LICENSE("GPL"); | |
| EXPORT_SYMBOL(tda10021_attach); |