| # | |
| # Multimedia Video device configuration | |
| # | |
| if VIDEO_V4L2 | |
| config VIDEO_IR_I2C | |
| tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT | |
| depends on I2C && RC_CORE | |
| default y | |
| ---help--- | |
| Most boards have an IR chip directly connected via GPIO. However, | |
| some video boards have the IR connected via I2C bus. | |
| If your board doesn't have an I2C IR chip, you may disable this | |
| option. | |
| In doubt, say Y. | |
| # | |
| # Encoder / Decoder module configuration | |
| # | |
| menu "Encoders, decoders, sensors and other helper chips" | |
| visible if !MEDIA_SUBDRV_AUTOSELECT | |
| comment "Audio decoders, processors and mixers" | |
| config VIDEO_TVAUDIO | |
| tristate "Simple audio decoder chips" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for several audio decoder chips found on some bt8xx boards: | |
| Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
| tea6320, tea6420, tda8425, ta8874z. | |
| Microchip: pic16c54 based design on ProVideo PV951 board. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tvaudio. | |
| config VIDEO_TDA7432 | |
| tristate "Philips TDA7432 audio processor" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for tda7432 audio decoder chip found on some bt8xx boards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tda7432. | |
| config VIDEO_TDA9840 | |
| tristate "Philips TDA9840 audio processor" | |
| depends on I2C | |
| ---help--- | |
| Support for tda9840 audio decoder chip found on some Zoran boards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tda9840. | |
| config VIDEO_TEA6415C | |
| tristate "Philips TEA6415C audio processor" | |
| depends on I2C | |
| ---help--- | |
| Support for tea6415c audio decoder chip found on some bt8xx boards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tea6415c. | |
| config VIDEO_TEA6420 | |
| tristate "Philips TEA6420 audio processor" | |
| depends on I2C | |
| ---help--- | |
| Support for tea6420 audio decoder chip found on some bt8xx boards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tea6420. | |
| config VIDEO_MSP3400 | |
| tristate "Micronas MSP34xx audio decoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Micronas MSP34xx series of audio decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called msp3400. | |
| config VIDEO_CS5345 | |
| tristate "Cirrus Logic CS5345 audio ADC" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Cirrus Logic CS5345 24-bit, 192 kHz | |
| stereo A/D converter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cs5345. | |
| config VIDEO_CS53L32A | |
| tristate "Cirrus Logic CS53L32A audio ADC" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Cirrus Logic CS53L32A low voltage | |
| stereo A/D converter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cs53l32a. | |
| config VIDEO_TLV320AIC23B | |
| tristate "Texas Instruments TLV320AIC23B audio codec" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Texas Instruments TLV320AIC23B audio codec. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tlv320aic23b. | |
| config VIDEO_UDA1342 | |
| tristate "Philips UDA1342 audio codec" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips UDA1342 audio codec. | |
| To compile this driver as a module, choose M here: the | |
| module will be called uda1342. | |
| config VIDEO_WM8775 | |
| tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Wolfson Microelectronics WM8775 high | |
| performance stereo A/D Converter with a 4 channel input mixer. | |
| To compile this driver as a module, choose M here: the | |
| module will be called wm8775. | |
| config VIDEO_WM8739 | |
| tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Wolfson Microelectronics WM8739 | |
| stereo A/D Converter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called wm8739. | |
| config VIDEO_VP27SMPX | |
| tristate "Panasonic VP27's internal MPX" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the internal MPX of the Panasonic VP27s tuner. | |
| To compile this driver as a module, choose M here: the | |
| module will be called vp27smpx. | |
| config VIDEO_SONY_BTF_MPX | |
| tristate "Sony BTF's internal MPX" | |
| depends on VIDEO_V4L2 && I2C | |
| help | |
| Support for the internal MPX of the Sony BTF-PG472Z tuner. | |
| To compile this driver as a module, choose M here: the | |
| module will be called sony-btf-mpx. | |
| comment "RDS decoders" | |
| config VIDEO_SAA6588 | |
| tristate "SAA6588 Radio Chip RDS decoder support" | |
| depends on VIDEO_V4L2 && I2C | |
| help | |
| Support for this Radio Data System (RDS) decoder. This allows | |
| seeing radio station identification transmitted using this | |
| standard. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa6588. | |
| comment "Video decoders" | |
| config VIDEO_ADV7180 | |
| tristate "Analog Devices ADV7180 decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Analog Devices ADV7180 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7180. | |
| config VIDEO_ADV7183 | |
| tristate "Analog Devices ADV7183 decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| V4l2 subdevice driver for the Analog Devices | |
| ADV7183 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7183. | |
| config VIDEO_ADV7604 | |
| tristate "Analog Devices ADV7604 decoder" | |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| Support for the Analog Devices ADV7604 video decoder. | |
| This is a Analog Devices Component/Graphics Digitizer | |
| with 4:1 Multiplexed HDMI Receiver. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7604. | |
| config VIDEO_ADV7842 | |
| tristate "Analog Devices ADV7842 decoder" | |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| Support for the Analog Devices ADV7842 video decoder. | |
| This is a Analog Devices Component/Graphics/SD Digitizer | |
| with 2:1 Multiplexed HDMI Receiver. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7842. | |
| config VIDEO_BT819 | |
| tristate "BT819A VideoStream decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for BT819A video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bt819. | |
| config VIDEO_BT856 | |
| tristate "BT856 VideoStream decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for BT856 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bt856. | |
| config VIDEO_BT866 | |
| tristate "BT866 VideoStream decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for BT866 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bt866. | |
| config VIDEO_KS0127 | |
| tristate "KS0127 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for KS0127 video decoder. | |
| This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
| cards. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ks0127. | |
| config VIDEO_ML86V7667 | |
| tristate "OKI ML86V7667 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the OKI Semiconductor ML86V7667 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ml86v7667. | |
| config VIDEO_SAA7110 | |
| tristate "Philips SAA7110 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7110 video decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7110. | |
| config VIDEO_SAA711X | |
| tristate "Philips SAA7111/3/4/5 video decoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7111/3/4/5 video decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7115. | |
| config VIDEO_SAA7191 | |
| tristate "Philips SAA7191 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7191 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7191. | |
| config VIDEO_TVP514X | |
| tristate "Texas Instruments TVP514x video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 | |
| decoder. It is currently working with the TI OMAP3 camera | |
| controller. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tvp514x. | |
| config VIDEO_TVP5150 | |
| tristate "Texas Instruments TVP5150 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Texas Instruments TVP5150 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tvp5150. | |
| config VIDEO_TVP7002 | |
| tristate "Texas Instruments TVP7002 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Texas Instruments TVP7002 video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tvp7002. | |
| config VIDEO_TW2804 | |
| tristate "Techwell TW2804 multiple video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Techwell tw2804 multiple video decoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tw2804. | |
| config VIDEO_TW9903 | |
| tristate "Techwell TW9903 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Techwell tw9903 multi-standard video decoder | |
| with high quality down scaler. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tw9903. | |
| config VIDEO_TW9906 | |
| tristate "Techwell TW9906 video decoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Techwell tw9906 enhanced multi-standard comb filter | |
| video decoder with YCbCr input support. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tw9906. | |
| config VIDEO_VPX3220 | |
| tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for VPX322x video decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called vpx3220. | |
| comment "Video and audio decoders" | |
| config VIDEO_SAA717X | |
| tristate "Philips SAA7171/3/4 audio/video decoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7171/3/4 audio/video decoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa717x. | |
| source "drivers/media/i2c/cx25840/Kconfig" | |
| comment "Video encoders" | |
| config VIDEO_SAA7127 | |
| tristate "Philips SAA7127/9 digital video encoders" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7127/9 digital video encoders. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7127. | |
| config VIDEO_SAA7185 | |
| tristate "Philips SAA7185 video encoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA7185 video encoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa7185. | |
| config VIDEO_ADV7170 | |
| tristate "Analog Devices ADV7170 video encoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Analog Devices ADV7170 video encoder driver | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7170. | |
| config VIDEO_ADV7175 | |
| tristate "Analog Devices ADV7175 video encoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Analog Devices ADV7175 video encoder driver | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7175. | |
| config VIDEO_ADV7343 | |
| tristate "ADV7343 video encoder" | |
| depends on I2C | |
| help | |
| Support for Analog Devices I2C bus based ADV7343 encoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7343. | |
| config VIDEO_ADV7393 | |
| tristate "ADV7393 video encoder" | |
| depends on I2C | |
| help | |
| Support for Analog Devices I2C bus based ADV7393 encoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7393. | |
| config VIDEO_ADV7511 | |
| tristate "Analog Devices ADV7511 encoder" | |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| Support for the Analog Devices ADV7511 video encoder. | |
| This is a Analog Devices HDMI transmitter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adv7511. | |
| config VIDEO_AD9389B | |
| tristate "Analog Devices AD9389B encoder" | |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| Support for the Analog Devices AD9389B video encoder. | |
| This is a Analog Devices HDMI transmitter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad9389b. | |
| config VIDEO_AK881X | |
| tristate "AK8813/AK8814 video encoders" | |
| depends on I2C | |
| help | |
| Video output driver for AKM AK8813 and AK8814 TV encoders | |
| config VIDEO_THS8200 | |
| tristate "Texas Instruments THS8200 video encoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Texas Instruments THS8200 video encoder. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ths8200. | |
| comment "Camera sensor devices" | |
| config VIDEO_APTINA_PLL | |
| tristate | |
| config VIDEO_SMIAPP_PLL | |
| tristate | |
| config VIDEO_OV7640 | |
| tristate "OmniVision OV7640 sensor support" | |
| depends on I2C && VIDEO_V4L2 | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the OmniVision | |
| OV7640 camera. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ov7640. | |
| config VIDEO_OV7670 | |
| tristate "OmniVision OV7670 sensor support" | |
| depends on I2C && VIDEO_V4L2 | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the OmniVision | |
| OV7670 VGA camera. It currently only works with the M88ALP01 | |
| controller. | |
| config VIDEO_OV9650 | |
| tristate "OmniVision OV9650/OV9652 sensor support" | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| This is a V4L2 sensor-level driver for the Omnivision | |
| OV9650 and OV9652 camera sensors. | |
| config VIDEO_VS6624 | |
| tristate "ST VS6624 sensor support" | |
| depends on VIDEO_V4L2 && I2C | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the ST VS6624 | |
| camera. | |
| To compile this driver as a module, choose M here: the | |
| module will be called vs6624. | |
| config VIDEO_MT9M032 | |
| tristate "MT9M032 camera sensor support" | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| depends on MEDIA_CAMERA_SUPPORT | |
| select VIDEO_APTINA_PLL | |
| ---help--- | |
| This driver supports MT9M032 camera sensors from Aptina, monochrome | |
| models only. | |
| config VIDEO_MT9P031 | |
| tristate "Aptina MT9P031 support" | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| depends on MEDIA_CAMERA_SUPPORT | |
| select VIDEO_APTINA_PLL | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the Aptina | |
| (Micron) mt9p031 5 Mpixel camera. | |
| config VIDEO_MT9T001 | |
| tristate "Aptina MT9T001 support" | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the Aptina | |
| (Micron) mt0t001 3 Mpixel camera. | |
| config VIDEO_MT9V011 | |
| tristate "Micron mt9v011 sensor support" | |
| depends on I2C && VIDEO_V4L2 | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the Micron | |
| mt0v011 1.3 Mpixel camera. It currently only works with the | |
| em28xx driver. | |
| config VIDEO_MT9V032 | |
| tristate "Micron MT9V032 sensor support" | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This is a Video4Linux2 sensor-level driver for the Micron | |
| MT9V032 752x480 CMOS sensor. | |
| config VIDEO_SR030PC30 | |
| tristate "Siliconfile SR030PC30 sensor support" | |
| depends on I2C && VIDEO_V4L2 | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This driver supports SR030PC30 VGA camera from Siliconfile | |
| config VIDEO_NOON010PC30 | |
| tristate "Siliconfile NOON010PC30 sensor support" | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This driver supports NOON010PC30 CIF camera from Siliconfile | |
| source "drivers/media/i2c/m5mols/Kconfig" | |
| config VIDEO_S5K6AA | |
| tristate "Samsung S5K6AAFX sensor support" | |
| depends on MEDIA_CAMERA_SUPPORT | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M | |
| camera sensor with an embedded SoC image signal processor. | |
| config VIDEO_S5K4ECGX | |
| tristate "Samsung S5K4ECGX sensor support" | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M | |
| camera sensor with an embedded SoC image signal processor. | |
| config VIDEO_S5K5BAF | |
| tristate "Samsung S5K5BAF sensor support" | |
| depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M | |
| camera sensor with an embedded SoC image signal processor. | |
| source "drivers/media/i2c/smiapp/Kconfig" | |
| config VIDEO_S5C73M3 | |
| tristate "Samsung S5C73M3 sensor support" | |
| depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
| ---help--- | |
| This is a V4L2 sensor-level driver for Samsung S5C73M3 | |
| 8 Mpixel camera. | |
| comment "Flash devices" | |
| config VIDEO_ADP1653 | |
| tristate "ADP1653 flash support" | |
| depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This is a driver for the ADP1653 flash controller. It is used for | |
| example in Nokia N900. | |
| config VIDEO_AS3645A | |
| tristate "AS3645A flash driver support" | |
| depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
| depends on MEDIA_CAMERA_SUPPORT | |
| ---help--- | |
| This is a driver for the AS3645A and LM3555 flash controllers. It has | |
| build in control for flash, torch and indicator LEDs. | |
| config VIDEO_LM3560 | |
| tristate "LM3560 dual flash driver support" | |
| depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
| depends on MEDIA_CAMERA_SUPPORT | |
| select REGMAP_I2C | |
| ---help--- | |
| This is a driver for the lm3560 dual flash controllers. It controls | |
| flash, torch LEDs. | |
| comment "Video improvement chips" | |
| config VIDEO_UPD64031A | |
| tristate "NEC Electronics uPD64031A Ghost Reduction" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the NEC Electronics uPD64031A Ghost Reduction | |
| video chip. It is most often found in NTSC TV cards made for | |
| Japan and is used to reduce the 'ghosting' effect that can | |
| be present in analog TV broadcasts. | |
| To compile this driver as a module, choose M here: the | |
| module will be called upd64031a. | |
| config VIDEO_UPD64083 | |
| tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the NEC Electronics uPD64083 3-Dimensional Y/C | |
| separation video chip. It is used to improve the quality of | |
| the colors of a composite signal. | |
| To compile this driver as a module, choose M here: the | |
| module will be called upd64083. | |
| comment "Audio/Video compression chips" | |
| config VIDEO_SAA6752HS | |
| tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3 | |
| audio encoder with multiplexer. | |
| To compile this driver as a module, choose M here: the | |
| module will be called saa6752hs. | |
| comment "Miscellaneous helper chips" | |
| config VIDEO_THS7303 | |
| tristate "THS7303/53 Video Amplifier" | |
| depends on VIDEO_V4L2 && I2C | |
| help | |
| Support for TI THS7303/53 video amplifier | |
| To compile this driver as a module, choose M here: the | |
| module will be called ths7303. | |
| config VIDEO_M52790 | |
| tristate "Mitsubishi M52790 A/V switch" | |
| depends on VIDEO_V4L2 && I2C | |
| ---help--- | |
| Support for the Mitsubishi M52790 A/V switch. | |
| To compile this driver as a module, choose M here: the | |
| module will be called m52790. | |
| endmenu | |
| menu "Sensors used on soc_camera driver" | |
| if SOC_CAMERA | |
| source "drivers/media/i2c/soc_camera/Kconfig" | |
| endif | |
| endmenu | |
| endif |