| /* | |
| * sr.c Copyright (C) 1992 David Giller | |
| * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale | |
| * | |
| * adapted from: | |
| * sd.c Copyright (C) 1992 Drew Eckhardt | |
| * Linux scsi disk driver by | |
| * Drew Eckhardt <drew@colorado.edu> | |
| * | |
| * Modified by Eric Youngdale ericy@andante.org to | |
| * add scatter-gather, multiple outstanding request, and other | |
| * enhancements. | |
| * | |
| * Modified by Eric Youngdale eric@andante.org to support loadable | |
| * low-level scsi drivers. | |
| * | |
| * Modified by Thomas Quinot thomas@melchior.cuivre.fdn.fr to | |
| * provide auto-eject. | |
| * | |
| * Modified by Gerd Knorr <kraxel@cs.tu-berlin.de> to support the | |
| * generic cdrom interface | |
| * | |
| * Modified by Jens Axboe <axboe@suse.de> - Uniform sr_packet() | |
| * interface, capabilities probe additions, ioctl cleanups, etc. | |
| * | |
| * Modified by Richard Gooch <rgooch@atnf.csiro.au> to support devfs | |
| * | |
| * Modified by Jens Axboe <axboe@suse.de> - support DVD-RAM | |
| * transparently and lose the GHOST hack | |
| * | |
| * Modified by Arnaldo Carvalho de Melo <acme@conectiva.com.br> | |
| * check resource allocation in sr_init and some cleanups | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/bio.h> | |
| #include <linux/string.h> | |
| #include <linux/errno.h> | |
| #include <linux/cdrom.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/mutex.h> | |
| #include <linux/slab.h> | |
| #include <linux/pm_runtime.h> | |
| #include <asm/uaccess.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_dbg.h> | |
| #include <scsi/scsi_device.h> | |
| #include <scsi/scsi_driver.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/scsi_eh.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_ioctl.h> /* For the door lock/unlock commands */ | |
| #include "scsi_logging.h" | |
| #include "sr.h" | |
| MODULE_DESCRIPTION("SCSI cdrom (sr) driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR); | |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_ROM); | |
| MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM); | |
| #define SR_DISKS 256 | |
| #define SR_CAPABILITIES \ | |
| (CDC_CLOSE_TRAY|CDC_OPEN_TRAY|CDC_LOCK|CDC_SELECT_SPEED| \ | |
| CDC_SELECT_DISC|CDC_MULTI_SESSION|CDC_MCN|CDC_MEDIA_CHANGED| \ | |
| CDC_PLAY_AUDIO|CDC_RESET|CDC_DRIVE_STATUS| \ | |
| CDC_CD_R|CDC_CD_RW|CDC_DVD|CDC_DVD_R|CDC_DVD_RAM|CDC_GENERIC_PACKET| \ | |
| CDC_MRW|CDC_MRW_W|CDC_RAM) | |
| static DEFINE_MUTEX(sr_mutex); | |
| static int sr_probe(struct device *); | |
| static int sr_remove(struct device *); | |
| static int sr_done(struct scsi_cmnd *); | |
| static int sr_runtime_suspend(struct device *dev); | |
| static struct dev_pm_ops sr_pm_ops = { | |
| .runtime_suspend = sr_runtime_suspend, | |
| }; | |
| static struct scsi_driver sr_template = { | |
| .owner = THIS_MODULE, | |
| .gendrv = { | |
| .name = "sr", | |
| .probe = sr_probe, | |
| .remove = sr_remove, | |
| .pm = &sr_pm_ops, | |
| }, | |
| .done = sr_done, | |
| }; | |
| static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG]; | |
| static DEFINE_SPINLOCK(sr_index_lock); | |
| /* This semaphore is used to mediate the 0->1 reference get in the | |
| * face of object destruction (i.e. we can't allow a get on an | |
| * object after last put) */ | |
| static DEFINE_MUTEX(sr_ref_mutex); | |
| static int sr_open(struct cdrom_device_info *, int); | |
| static void sr_release(struct cdrom_device_info *); | |
| static void get_sectorsize(struct scsi_cd *); | |
| static void get_capabilities(struct scsi_cd *); | |
| static unsigned int sr_check_events(struct cdrom_device_info *cdi, | |
| unsigned int clearing, int slot); | |
| static int sr_packet(struct cdrom_device_info *, struct packet_command *); | |
| static struct cdrom_device_ops sr_dops = { | |
| .open = sr_open, | |
| .release = sr_release, | |
| .drive_status = sr_drive_status, | |
| .check_events = sr_check_events, | |
| .tray_move = sr_tray_move, | |
| .lock_door = sr_lock_door, | |
| .select_speed = sr_select_speed, | |
| .get_last_session = sr_get_last_session, | |
| .get_mcn = sr_get_mcn, | |
| .reset = sr_reset, | |
| .audio_ioctl = sr_audio_ioctl, | |
| .capability = SR_CAPABILITIES, | |
| .generic_packet = sr_packet, | |
| }; | |
| static void sr_kref_release(struct kref *kref); | |
| static inline struct scsi_cd *scsi_cd(struct gendisk *disk) | |
| { | |
| return container_of(disk->private_data, struct scsi_cd, driver); | |
| } | |
| static int sr_runtime_suspend(struct device *dev) | |
| { | |
| struct scsi_cd *cd = dev_get_drvdata(dev); | |
| if (cd->media_present) | |
| return -EBUSY; | |
| else | |
| return 0; | |
| } | |
| /* | |
| * The get and put routines for the struct scsi_cd. Note this entity | |
| * has a scsi_device pointer and owns a reference to this. | |
| */ | |
| static inline struct scsi_cd *scsi_cd_get(struct gendisk *disk) | |
| { | |
| struct scsi_cd *cd = NULL; | |
| mutex_lock(&sr_ref_mutex); | |
| if (disk->private_data == NULL) | |
| goto out; | |
| cd = scsi_cd(disk); | |
| kref_get(&cd->kref); | |
| if (scsi_device_get(cd->device)) { | |
| kref_put(&cd->kref, sr_kref_release); | |
| cd = NULL; | |
| } | |
| out: | |
| mutex_unlock(&sr_ref_mutex); | |
| return cd; | |
| } | |
| static void scsi_cd_put(struct scsi_cd *cd) | |
| { | |
| struct scsi_device *sdev = cd->device; | |
| mutex_lock(&sr_ref_mutex); | |
| kref_put(&cd->kref, sr_kref_release); | |
| scsi_device_put(sdev); | |
| mutex_unlock(&sr_ref_mutex); | |
| } | |
| static unsigned int sr_get_events(struct scsi_device *sdev) | |
| { | |
| u8 buf[8]; | |
| u8 cmd[] = { GET_EVENT_STATUS_NOTIFICATION, | |
| 1, /* polled */ | |
| 0, 0, /* reserved */ | |
| 1 << 4, /* notification class: media */ | |
| 0, 0, /* reserved */ | |
| 0, sizeof(buf), /* allocation length */ | |
| 0, /* control */ | |
| }; | |
| struct event_header *eh = (void *)buf; | |
| struct media_event_desc *med = (void *)(buf + 4); | |
| struct scsi_sense_hdr sshdr; | |
| int result; | |
| result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, sizeof(buf), | |
| &sshdr, SR_TIMEOUT, MAX_RETRIES, NULL); | |
| if (scsi_sense_valid(&sshdr) && sshdr.sense_key == UNIT_ATTENTION) | |
| return DISK_EVENT_MEDIA_CHANGE; | |
| if (result || be16_to_cpu(eh->data_len) < sizeof(*med)) | |
| return 0; | |
| if (eh->nea || eh->notification_class != 0x4) | |
| return 0; | |
| if (med->media_event_code == 1) | |
| return DISK_EVENT_EJECT_REQUEST; | |
| else if (med->media_event_code == 2) | |
| return DISK_EVENT_MEDIA_CHANGE; | |
| return 0; | |
| } | |
| /* | |
| * This function checks to see if the media has been changed or eject | |
| * button has been pressed. It is possible that we have already | |
| * sensed a change, or the drive may have sensed one and not yet | |
| * reported it. The past events are accumulated in sdev->changed and | |
| * returned together with the current state. | |
| */ | |
| static unsigned int sr_check_events(struct cdrom_device_info *cdi, | |
| unsigned int clearing, int slot) | |
| { | |
| struct scsi_cd *cd = cdi->handle; | |
| bool last_present; | |
| struct scsi_sense_hdr sshdr; | |
| unsigned int events; | |
| int ret; | |
| /* no changer support */ | |
| if (CDSL_CURRENT != slot) | |
| return 0; | |
| events = sr_get_events(cd->device); | |
| cd->get_event_changed |= events & DISK_EVENT_MEDIA_CHANGE; | |
| /* | |
| * If earlier GET_EVENT_STATUS_NOTIFICATION and TUR did not agree | |
| * for several times in a row. We rely on TUR only for this likely | |
| * broken device, to prevent generating incorrect media changed | |
| * events for every open(). | |
| */ | |
| if (cd->ignore_get_event) { | |
| events &= ~DISK_EVENT_MEDIA_CHANGE; | |
| goto do_tur; | |
| } | |
| /* | |
| * GET_EVENT_STATUS_NOTIFICATION is enough unless MEDIA_CHANGE | |
| * is being cleared. Note that there are devices which hang | |
| * if asked to execute TUR repeatedly. | |
| */ | |
| if (cd->device->changed) { | |
| events |= DISK_EVENT_MEDIA_CHANGE; | |
| cd->device->changed = 0; | |
| cd->tur_changed = true; | |
| } | |
| if (!(clearing & DISK_EVENT_MEDIA_CHANGE)) | |
| return events; | |
| do_tur: | |
| /* let's see whether the media is there with TUR */ | |
| last_present = cd->media_present; | |
| ret = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr); | |
| /* | |
| * Media is considered to be present if TUR succeeds or fails with | |
| * sense data indicating something other than media-not-present | |
| * (ASC 0x3a). | |
| */ | |
| cd->media_present = scsi_status_is_good(ret) || | |
| (scsi_sense_valid(&sshdr) && sshdr.asc != 0x3a); | |
| if (last_present != cd->media_present) | |
| cd->device->changed = 1; | |
| if (cd->device->changed) { | |
| events |= DISK_EVENT_MEDIA_CHANGE; | |
| cd->device->changed = 0; | |
| cd->tur_changed = true; | |
| } | |
| if (cd->ignore_get_event) | |
| return events; | |
| /* check whether GET_EVENT is reporting spurious MEDIA_CHANGE */ | |
| if (!cd->tur_changed) { | |
| if (cd->get_event_changed) { | |
| if (cd->tur_mismatch++ > 8) { | |
| sdev_printk(KERN_WARNING, cd->device, | |
| "GET_EVENT and TUR disagree continuously, suppress GET_EVENT events\n"); | |
| cd->ignore_get_event = true; | |
| } | |
| } else { | |
| cd->tur_mismatch = 0; | |
| } | |
| } | |
| cd->tur_changed = false; | |
| cd->get_event_changed = false; | |
| return events; | |
| } | |
| /* | |
| * sr_done is the interrupt routine for the device driver. | |
| * | |
| * It will be notified on the end of a SCSI read / write, and will take one | |
| * of several actions based on success or failure. | |
| */ | |
| static int sr_done(struct scsi_cmnd *SCpnt) | |
| { | |
| int result = SCpnt->result; | |
| int this_count = scsi_bufflen(SCpnt); | |
| int good_bytes = (result == 0 ? this_count : 0); | |
| int block_sectors = 0; | |
| long error_sector; | |
| struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk); | |
| #ifdef DEBUG | |
| printk("sr.c done: %x\n", result); | |
| #endif | |
| /* | |
| * Handle MEDIUM ERRORs or VOLUME OVERFLOWs that indicate partial | |
| * success. Since this is a relatively rare error condition, no | |
| * care is taken to avoid unnecessary additional work such as | |
| * memcpy's that could be avoided. | |
| */ | |
| if (driver_byte(result) != 0 && /* An error occurred */ | |
| (SCpnt->sense_buffer[0] & 0x7f) == 0x70) { /* Sense current */ | |
| switch (SCpnt->sense_buffer[2]) { | |
| case MEDIUM_ERROR: | |
| case VOLUME_OVERFLOW: | |
| case ILLEGAL_REQUEST: | |
| if (!(SCpnt->sense_buffer[0] & 0x90)) | |
| break; | |
| error_sector = (SCpnt->sense_buffer[3] << 24) | | |
| (SCpnt->sense_buffer[4] << 16) | | |
| (SCpnt->sense_buffer[5] << 8) | | |
| SCpnt->sense_buffer[6]; | |
| if (SCpnt->request->bio != NULL) | |
| block_sectors = | |
| bio_sectors(SCpnt->request->bio); | |
| if (block_sectors < 4) | |
| block_sectors = 4; | |
| if (cd->device->sector_size == 2048) | |
| error_sector <<= 2; | |
| error_sector &= ~(block_sectors - 1); | |
| good_bytes = (error_sector - | |
| blk_rq_pos(SCpnt->request)) << 9; | |
| if (good_bytes < 0 || good_bytes >= this_count) | |
| good_bytes = 0; | |
| /* | |
| * The SCSI specification allows for the value | |
| * returned by READ CAPACITY to be up to 75 2K | |
| * sectors past the last readable block. | |
| * Therefore, if we hit a medium error within the | |
| * last 75 2K sectors, we decrease the saved size | |
| * value. | |
| */ | |
| if (error_sector < get_capacity(cd->disk) && | |
| cd->capacity - error_sector < 4 * 75) | |
| set_capacity(cd->disk, error_sector); | |
| break; | |
| case RECOVERED_ERROR: | |
| good_bytes = this_count; | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| return good_bytes; | |
| } | |
| static int sr_prep_fn(struct request_queue *q, struct request *rq) | |
| { | |
| int block = 0, this_count, s_size; | |
| struct scsi_cd *cd; | |
| struct scsi_cmnd *SCpnt; | |
| struct scsi_device *sdp = q->queuedata; | |
| int ret; | |
| if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { | |
| ret = scsi_setup_blk_pc_cmnd(sdp, rq); | |
| goto out; | |
| } else if (rq->cmd_type != REQ_TYPE_FS) { | |
| ret = BLKPREP_KILL; | |
| goto out; | |
| } | |
| ret = scsi_setup_fs_cmnd(sdp, rq); | |
| if (ret != BLKPREP_OK) | |
| goto out; | |
| SCpnt = rq->special; | |
| cd = scsi_cd(rq->rq_disk); | |
| /* from here on until we're complete, any goto out | |
| * is used for a killable error condition */ | |
| ret = BLKPREP_KILL; | |
| SCSI_LOG_HLQUEUE(1, printk("Doing sr request, dev = %s, block = %d\n", | |
| cd->disk->disk_name, block)); | |
| if (!cd->device || !scsi_device_online(cd->device)) { | |
| SCSI_LOG_HLQUEUE(2, printk("Finishing %u sectors\n", | |
| blk_rq_sectors(rq))); | |
| SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt)); | |
| goto out; | |
| } | |
| if (cd->device->changed) { | |
| /* | |
| * quietly refuse to do anything to a changed disc until the | |
| * changed bit has been reset | |
| */ | |
| goto out; | |
| } | |
| /* | |
| * we do lazy blocksize switching (when reading XA sectors, | |
| * see CDROMREADMODE2 ioctl) | |
| */ | |
| s_size = cd->device->sector_size; | |
| if (s_size > 2048) { | |
| if (!in_interrupt()) | |
| sr_set_blocklength(cd, 2048); | |
| else | |
| printk("sr: can't switch blocksize: in interrupt\n"); | |
| } | |
| if (s_size != 512 && s_size != 1024 && s_size != 2048) { | |
| scmd_printk(KERN_ERR, SCpnt, "bad sector size %d\n", s_size); | |
| goto out; | |
| } | |
| if (rq_data_dir(rq) == WRITE) { | |
| if (!cd->device->writeable) | |
| goto out; | |
| SCpnt->cmnd[0] = WRITE_10; | |
| SCpnt->sc_data_direction = DMA_TO_DEVICE; | |
| cd->cdi.media_written = 1; | |
| } else if (rq_data_dir(rq) == READ) { | |
| SCpnt->cmnd[0] = READ_10; | |
| SCpnt->sc_data_direction = DMA_FROM_DEVICE; | |
| } else { | |
| blk_dump_rq_flags(rq, "Unknown sr command"); | |
| goto out; | |
| } | |
| { | |
| struct scatterlist *sg; | |
| int i, size = 0, sg_count = scsi_sg_count(SCpnt); | |
| scsi_for_each_sg(SCpnt, sg, sg_count, i) | |
| size += sg->length; | |
| if (size != scsi_bufflen(SCpnt)) { | |
| scmd_printk(KERN_ERR, SCpnt, | |
| "mismatch count %d, bytes %d\n", | |
| size, scsi_bufflen(SCpnt)); | |
| if (scsi_bufflen(SCpnt) > size) | |
| SCpnt->sdb.length = size; | |
| } | |
| } | |
| /* | |
| * request doesn't start on hw block boundary, add scatter pads | |
| */ | |
| if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) || | |
| (scsi_bufflen(SCpnt) % s_size)) { | |
| scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n"); | |
| goto out; | |
| } | |
| this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9); | |
| SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%u 512 byte blocks.\n", | |
| cd->cdi.name, | |
| (rq_data_dir(rq) == WRITE) ? | |
| "writing" : "reading", | |
| this_count, blk_rq_sectors(rq))); | |
| SCpnt->cmnd[1] = 0; | |
| block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9); | |
| if (this_count > 0xffff) { | |
| this_count = 0xffff; | |
| SCpnt->sdb.length = this_count * s_size; | |
| } | |
| SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff; | |
| SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff; | |
| SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff; | |
| SCpnt->cmnd[5] = (unsigned char) block & 0xff; | |
| SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0; | |
| SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff; | |
| SCpnt->cmnd[8] = (unsigned char) this_count & 0xff; | |
| /* | |
| * We shouldn't disconnect in the middle of a sector, so with a dumb | |
| * host adapter, it's safe to assume that we can at least transfer | |
| * this many bytes between each connect / disconnect. | |
| */ | |
| SCpnt->transfersize = cd->device->sector_size; | |
| SCpnt->underflow = this_count << 9; | |
| SCpnt->allowed = MAX_RETRIES; | |
| /* | |
| * This indicates that the command is ready from our end to be | |
| * queued. | |
| */ | |
| ret = BLKPREP_OK; | |
| out: | |
| return scsi_prep_return(q, rq, ret); | |
| } | |
| static int sr_block_open(struct block_device *bdev, fmode_t mode) | |
| { | |
| struct scsi_cd *cd; | |
| int ret = -ENXIO; | |
| mutex_lock(&sr_mutex); | |
| cd = scsi_cd_get(bdev->bd_disk); | |
| if (cd) { | |
| ret = cdrom_open(&cd->cdi, bdev, mode); | |
| if (ret) | |
| scsi_cd_put(cd); | |
| } | |
| mutex_unlock(&sr_mutex); | |
| return ret; | |
| } | |
| static void sr_block_release(struct gendisk *disk, fmode_t mode) | |
| { | |
| struct scsi_cd *cd = scsi_cd(disk); | |
| mutex_lock(&sr_mutex); | |
| cdrom_release(&cd->cdi, mode); | |
| scsi_cd_put(cd); | |
| mutex_unlock(&sr_mutex); | |
| } | |
| static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, | |
| unsigned long arg) | |
| { | |
| struct scsi_cd *cd = scsi_cd(bdev->bd_disk); | |
| struct scsi_device *sdev = cd->device; | |
| void __user *argp = (void __user *)arg; | |
| int ret; | |
| mutex_lock(&sr_mutex); | |
| /* | |
| * Send SCSI addressing ioctls directly to mid level, send other | |
| * ioctls to cdrom/block level. | |
| */ | |
| switch (cmd) { | |
| case SCSI_IOCTL_GET_IDLUN: | |
| case SCSI_IOCTL_GET_BUS_NUMBER: | |
| ret = scsi_ioctl(sdev, cmd, argp); | |
| goto out; | |
| } | |
| ret = cdrom_ioctl(&cd->cdi, bdev, mode, cmd, arg); | |
| if (ret != -ENOSYS) | |
| goto out; | |
| /* | |
| * ENODEV means that we didn't recognise the ioctl, or that we | |
| * cannot execute it in the current device state. In either | |
| * case fall through to scsi_ioctl, which will return ENDOEV again | |
| * if it doesn't recognise the ioctl | |
| */ | |
| ret = scsi_nonblockable_ioctl(sdev, cmd, argp, | |
| (mode & FMODE_NDELAY) != 0); | |
| if (ret != -ENODEV) | |
| goto out; | |
| ret = scsi_ioctl(sdev, cmd, argp); | |
| out: | |
| mutex_unlock(&sr_mutex); | |
| return ret; | |
| } | |
| static unsigned int sr_block_check_events(struct gendisk *disk, | |
| unsigned int clearing) | |
| { | |
| struct scsi_cd *cd = scsi_cd(disk); | |
| if (atomic_read(&cd->device->disk_events_disable_depth)) | |
| return 0; | |
| return cdrom_check_events(&cd->cdi, clearing); | |
| } | |
| static int sr_block_revalidate_disk(struct gendisk *disk) | |
| { | |
| struct scsi_cd *cd = scsi_cd(disk); | |
| struct scsi_sense_hdr sshdr; | |
| /* if the unit is not ready, nothing more to do */ | |
| if (scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr)) | |
| goto out; | |
| sr_cd_check(&cd->cdi); | |
| get_sectorsize(cd); | |
| out: | |
| return 0; | |
| } | |
| static const struct block_device_operations sr_bdops = | |
| { | |
| .owner = THIS_MODULE, | |
| .open = sr_block_open, | |
| .release = sr_block_release, | |
| .ioctl = sr_block_ioctl, | |
| .check_events = sr_block_check_events, | |
| .revalidate_disk = sr_block_revalidate_disk, | |
| /* | |
| * No compat_ioctl for now because sr_block_ioctl never | |
| * seems to pass arbitrary ioctls down to host drivers. | |
| */ | |
| }; | |
| static int sr_open(struct cdrom_device_info *cdi, int purpose) | |
| { | |
| struct scsi_cd *cd = cdi->handle; | |
| struct scsi_device *sdev = cd->device; | |
| int retval; | |
| /* | |
| * If the device is in error recovery, wait until it is done. | |
| * If the device is offline, then disallow any access to it. | |
| */ | |
| retval = -ENXIO; | |
| if (!scsi_block_when_processing_errors(sdev)) | |
| goto error_out; | |
| return 0; | |
| error_out: | |
| return retval; | |
| } | |
| static void sr_release(struct cdrom_device_info *cdi) | |
| { | |
| struct scsi_cd *cd = cdi->handle; | |
| if (cd->device->sector_size > 2048) | |
| sr_set_blocklength(cd, 2048); | |
| } | |
| static int sr_probe(struct device *dev) | |
| { | |
| struct scsi_device *sdev = to_scsi_device(dev); | |
| struct gendisk *disk; | |
| struct scsi_cd *cd; | |
| int minor, error; | |
| error = -ENODEV; | |
| if (sdev->type != TYPE_ROM && sdev->type != TYPE_WORM) | |
| goto fail; | |
| error = -ENOMEM; | |
| cd = kzalloc(sizeof(*cd), GFP_KERNEL); | |
| if (!cd) | |
| goto fail; | |
| kref_init(&cd->kref); | |
| disk = alloc_disk(1); | |
| if (!disk) | |
| goto fail_free; | |
| spin_lock(&sr_index_lock); | |
| minor = find_first_zero_bit(sr_index_bits, SR_DISKS); | |
| if (minor == SR_DISKS) { | |
| spin_unlock(&sr_index_lock); | |
| error = -EBUSY; | |
| goto fail_put; | |
| } | |
| __set_bit(minor, sr_index_bits); | |
| spin_unlock(&sr_index_lock); | |
| disk->major = SCSI_CDROM_MAJOR; | |
| disk->first_minor = minor; | |
| sprintf(disk->disk_name, "sr%d", minor); | |
| disk->fops = &sr_bdops; | |
| disk->flags = GENHD_FL_CD | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE; | |
| disk->events = DISK_EVENT_MEDIA_CHANGE | DISK_EVENT_EJECT_REQUEST; | |
| blk_queue_rq_timeout(sdev->request_queue, SR_TIMEOUT); | |
| cd->device = sdev; | |
| cd->disk = disk; | |
| cd->driver = &sr_template; | |
| cd->disk = disk; | |
| cd->capacity = 0x1fffff; | |
| cd->device->changed = 1; /* force recheck CD type */ | |
| cd->media_present = 1; | |
| cd->use = 1; | |
| cd->readcd_known = 0; | |
| cd->readcd_cdda = 0; | |
| cd->cdi.ops = &sr_dops; | |
| cd->cdi.handle = cd; | |
| cd->cdi.mask = 0; | |
| cd->cdi.capacity = 1; | |
| sprintf(cd->cdi.name, "sr%d", minor); | |
| sdev->sector_size = 2048; /* A guess, just in case */ | |
| /* FIXME: need to handle a get_capabilities failure properly ?? */ | |
| get_capabilities(cd); | |
| blk_queue_prep_rq(sdev->request_queue, sr_prep_fn); | |
| sr_vendor_init(cd); | |
| disk->driverfs_dev = &sdev->sdev_gendev; | |
| set_capacity(disk, cd->capacity); | |
| disk->private_data = &cd->driver; | |
| disk->queue = sdev->request_queue; | |
| cd->cdi.disk = disk; | |
| if (register_cdrom(&cd->cdi)) | |
| goto fail_put; | |
| /* | |
| * Initialize block layer runtime PM stuffs before the | |
| * periodic event checking request gets started in add_disk. | |
| */ | |
| blk_pm_runtime_init(sdev->request_queue, dev); | |
| dev_set_drvdata(dev, cd); | |
| disk->flags |= GENHD_FL_REMOVABLE; | |
| add_disk(disk); | |
| sdev_printk(KERN_DEBUG, sdev, | |
| "Attached scsi CD-ROM %s\n", cd->cdi.name); | |
| scsi_autopm_put_device(cd->device); | |
| return 0; | |
| fail_put: | |
| put_disk(disk); | |
| fail_free: | |
| kfree(cd); | |
| fail: | |
| return error; | |
| } | |
| static void get_sectorsize(struct scsi_cd *cd) | |
| { | |
| unsigned char cmd[10]; | |
| unsigned char buffer[8]; | |
| int the_result, retries = 3; | |
| int sector_size; | |
| struct request_queue *queue; | |
| do { | |
| cmd[0] = READ_CAPACITY; | |
| memset((void *) &cmd[1], 0, 9); | |
| memset(buffer, 0, sizeof(buffer)); | |
| /* Do the command and wait.. */ | |
| the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE, | |
| buffer, sizeof(buffer), NULL, | |
| SR_TIMEOUT, MAX_RETRIES, NULL); | |
| retries--; | |
| } while (the_result && retries); | |
| if (the_result) { | |
| cd->capacity = 0x1fffff; | |
| sector_size = 2048; /* A guess, just in case */ | |
| } else { | |
| long last_written; | |
| cd->capacity = 1 + ((buffer[0] << 24) | (buffer[1] << 16) | | |
| (buffer[2] << 8) | buffer[3]); | |
| /* | |
| * READ_CAPACITY doesn't return the correct size on | |
| * certain UDF media. If last_written is larger, use | |
| * it instead. | |
| * | |
| * http://bugzilla.kernel.org/show_bug.cgi?id=9668 | |
| */ | |
| if (!cdrom_get_last_written(&cd->cdi, &last_written)) | |
| cd->capacity = max_t(long, cd->capacity, last_written); | |
| sector_size = (buffer[4] << 24) | | |
| (buffer[5] << 16) | (buffer[6] << 8) | buffer[7]; | |
| switch (sector_size) { | |
| /* | |
| * HP 4020i CD-Recorder reports 2340 byte sectors | |
| * Philips CD-Writers report 2352 byte sectors | |
| * | |
| * Use 2k sectors for them.. | |
| */ | |
| case 0: | |
| case 2340: | |
| case 2352: | |
| sector_size = 2048; | |
| /* fall through */ | |
| case 2048: | |
| cd->capacity *= 4; | |
| /* fall through */ | |
| case 512: | |
| break; | |
| default: | |
| printk("%s: unsupported sector size %d.\n", | |
| cd->cdi.name, sector_size); | |
| cd->capacity = 0; | |
| } | |
| cd->device->sector_size = sector_size; | |
| /* | |
| * Add this so that we have the ability to correctly gauge | |
| * what the device is capable of. | |
| */ | |
| set_capacity(cd->disk, cd->capacity); | |
| } | |
| queue = cd->device->request_queue; | |
| blk_queue_logical_block_size(queue, sector_size); | |
| return; | |
| } | |
| static void get_capabilities(struct scsi_cd *cd) | |
| { | |
| unsigned char *buffer; | |
| struct scsi_mode_data data; | |
| struct scsi_sense_hdr sshdr; | |
| int rc, n; | |
| static const char *loadmech[] = | |
| { | |
| "caddy", | |
| "tray", | |
| "pop-up", | |
| "", | |
| "changer", | |
| "cartridge changer", | |
| "", | |
| "" | |
| }; | |
| /* allocate transfer buffer */ | |
| buffer = kmalloc(512, GFP_KERNEL | GFP_DMA); | |
| if (!buffer) { | |
| printk(KERN_ERR "sr: out of memory.\n"); | |
| return; | |
| } | |
| /* eat unit attentions */ | |
| scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr); | |
| /* ask for mode page 0x2a */ | |
| rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, 128, | |
| SR_TIMEOUT, 3, &data, NULL); | |
| if (!scsi_status_is_good(rc)) { | |
| /* failed, drive doesn't have capabilities mode page */ | |
| cd->cdi.speed = 1; | |
| cd->cdi.mask |= (CDC_CD_R | CDC_CD_RW | CDC_DVD_R | | |
| CDC_DVD | CDC_DVD_RAM | | |
| CDC_SELECT_DISC | CDC_SELECT_SPEED | | |
| CDC_MRW | CDC_MRW_W | CDC_RAM); | |
| kfree(buffer); | |
| printk("%s: scsi-1 drive\n", cd->cdi.name); | |
| return; | |
| } | |
| n = data.header_length + data.block_descriptor_length; | |
| cd->cdi.speed = ((buffer[n + 8] << 8) + buffer[n + 9]) / 176; | |
| cd->readcd_known = 1; | |
| cd->readcd_cdda = buffer[n + 5] & 0x01; | |
| /* print some capability bits */ | |
| printk("%s: scsi3-mmc drive: %dx/%dx %s%s%s%s%s%s\n", cd->cdi.name, | |
| ((buffer[n + 14] << 8) + buffer[n + 15]) / 176, | |
| cd->cdi.speed, | |
| buffer[n + 3] & 0x01 ? "writer " : "", /* CD Writer */ | |
| buffer[n + 3] & 0x20 ? "dvd-ram " : "", | |
| buffer[n + 2] & 0x02 ? "cd/rw " : "", /* can read rewriteable */ | |
| buffer[n + 4] & 0x20 ? "xa/form2 " : "", /* can read xa/from2 */ | |
| buffer[n + 5] & 0x01 ? "cdda " : "", /* can read audio data */ | |
| loadmech[buffer[n + 6] >> 5]); | |
| if ((buffer[n + 6] >> 5) == 0) | |
| /* caddy drives can't close tray... */ | |
| cd->cdi.mask |= CDC_CLOSE_TRAY; | |
| if ((buffer[n + 2] & 0x8) == 0) | |
| /* not a DVD drive */ | |
| cd->cdi.mask |= CDC_DVD; | |
| if ((buffer[n + 3] & 0x20) == 0) | |
| /* can't write DVD-RAM media */ | |
| cd->cdi.mask |= CDC_DVD_RAM; | |
| if ((buffer[n + 3] & 0x10) == 0) | |
| /* can't write DVD-R media */ | |
| cd->cdi.mask |= CDC_DVD_R; | |
| if ((buffer[n + 3] & 0x2) == 0) | |
| /* can't write CD-RW media */ | |
| cd->cdi.mask |= CDC_CD_RW; | |
| if ((buffer[n + 3] & 0x1) == 0) | |
| /* can't write CD-R media */ | |
| cd->cdi.mask |= CDC_CD_R; | |
| if ((buffer[n + 6] & 0x8) == 0) | |
| /* can't eject */ | |
| cd->cdi.mask |= CDC_OPEN_TRAY; | |
| if ((buffer[n + 6] >> 5) == mechtype_individual_changer || | |
| (buffer[n + 6] >> 5) == mechtype_cartridge_changer) | |
| cd->cdi.capacity = | |
| cdrom_number_of_slots(&cd->cdi); | |
| if (cd->cdi.capacity <= 1) | |
| /* not a changer */ | |
| cd->cdi.mask |= CDC_SELECT_DISC; | |
| /*else I don't think it can close its tray | |
| cd->cdi.mask |= CDC_CLOSE_TRAY; */ | |
| /* | |
| * if DVD-RAM, MRW-W or CD-RW, we are randomly writable | |
| */ | |
| if ((cd->cdi.mask & (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) != | |
| (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) { | |
| cd->device->writeable = 1; | |
| } | |
| kfree(buffer); | |
| } | |
| /* | |
| * sr_packet() is the entry point for the generic commands generated | |
| * by the Uniform CD-ROM layer. | |
| */ | |
| static int sr_packet(struct cdrom_device_info *cdi, | |
| struct packet_command *cgc) | |
| { | |
| struct scsi_cd *cd = cdi->handle; | |
| struct scsi_device *sdev = cd->device; | |
| if (cgc->cmd[0] == GPCMD_READ_DISC_INFO && sdev->no_read_disc_info) | |
| return -EDRIVE_CANT_DO_THIS; | |
| if (cgc->timeout <= 0) | |
| cgc->timeout = IOCTL_TIMEOUT; | |
| sr_do_ioctl(cd, cgc); | |
| return cgc->stat; | |
| } | |
| /** | |
| * sr_kref_release - Called to free the scsi_cd structure | |
| * @kref: pointer to embedded kref | |
| * | |
| * sr_ref_mutex must be held entering this routine. Because it is | |
| * called on last put, you should always use the scsi_cd_get() | |
| * scsi_cd_put() helpers which manipulate the semaphore directly | |
| * and never do a direct kref_put(). | |
| **/ | |
| static void sr_kref_release(struct kref *kref) | |
| { | |
| struct scsi_cd *cd = container_of(kref, struct scsi_cd, kref); | |
| struct gendisk *disk = cd->disk; | |
| spin_lock(&sr_index_lock); | |
| clear_bit(MINOR(disk_devt(disk)), sr_index_bits); | |
| spin_unlock(&sr_index_lock); | |
| unregister_cdrom(&cd->cdi); | |
| disk->private_data = NULL; | |
| put_disk(disk); | |
| kfree(cd); | |
| } | |
| static int sr_remove(struct device *dev) | |
| { | |
| struct scsi_cd *cd = dev_get_drvdata(dev); | |
| scsi_autopm_get_device(cd->device); | |
| blk_queue_prep_rq(cd->device->request_queue, scsi_prep_fn); | |
| del_gendisk(cd->disk); | |
| mutex_lock(&sr_ref_mutex); | |
| kref_put(&cd->kref, sr_kref_release); | |
| mutex_unlock(&sr_ref_mutex); | |
| return 0; | |
| } | |
| static int __init init_sr(void) | |
| { | |
| int rc; | |
| rc = register_blkdev(SCSI_CDROM_MAJOR, "sr"); | |
| if (rc) | |
| return rc; | |
| rc = scsi_register_driver(&sr_template.gendrv); | |
| if (rc) | |
| unregister_blkdev(SCSI_CDROM_MAJOR, "sr"); | |
| return rc; | |
| } | |
| static void __exit exit_sr(void) | |
| { | |
| scsi_unregister_driver(&sr_template.gendrv); | |
| unregister_blkdev(SCSI_CDROM_MAJOR, "sr"); | |
| } | |
| module_init(init_sr); | |
| module_exit(exit_sr); | |
| MODULE_LICENSE("GPL"); |