|  | /* | 
|  | * twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM | 
|  | * and audio CODEC devices | 
|  | * | 
|  | * Copyright (C) 2005-2006 Texas Instruments, Inc. | 
|  | * | 
|  | * Modifications to defer interrupt handling to a kernel thread: | 
|  | * Copyright (C) 2006 MontaVista Software, Inc. | 
|  | * | 
|  | * Based on tlv320aic23.c: | 
|  | * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> | 
|  | * | 
|  | * Code cleanup and modifications to IRQ handler. | 
|  | * by syed khasim <x0khasim@ti.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/irqdomain.h> | 
|  |  | 
|  | #include <linux/regulator/machine.h> | 
|  |  | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/i2c/twl.h> | 
|  |  | 
|  | #include "twl-core.h" | 
|  |  | 
|  | /* | 
|  | * The TWL4030 "Triton 2" is one of a family of a multi-function "Power | 
|  | * Management and System Companion Device" chips originally designed for | 
|  | * use in OMAP2 and OMAP 3 based systems.  Its control interfaces use I2C, | 
|  | * often at around 3 Mbit/sec, including for interrupt handling. | 
|  | * | 
|  | * This driver core provides genirq support for the interrupts emitted, | 
|  | * by the various modules, and exports register access primitives. | 
|  | * | 
|  | * FIXME this driver currently requires use of the first interrupt line | 
|  | * (and associated registers). | 
|  | */ | 
|  |  | 
|  | #define DRIVER_NAME			"twl" | 
|  |  | 
|  | /* Triton Core internal information (BEGIN) */ | 
|  |  | 
|  | /* Base Address defns for twl4030_map[] */ | 
|  |  | 
|  | /* subchip/slave 0 - USB ID */ | 
|  | #define TWL4030_BASEADD_USB		0x0000 | 
|  |  | 
|  | /* subchip/slave 1 - AUD ID */ | 
|  | #define TWL4030_BASEADD_AUDIO_VOICE	0x0000 | 
|  | #define TWL4030_BASEADD_GPIO		0x0098 | 
|  | #define TWL4030_BASEADD_INTBR		0x0085 | 
|  | #define TWL4030_BASEADD_PIH		0x0080 | 
|  | #define TWL4030_BASEADD_TEST		0x004C | 
|  |  | 
|  | /* subchip/slave 2 - AUX ID */ | 
|  | #define TWL4030_BASEADD_INTERRUPTS	0x00B9 | 
|  | #define TWL4030_BASEADD_LED		0x00EE | 
|  | #define TWL4030_BASEADD_MADC		0x0000 | 
|  | #define TWL4030_BASEADD_MAIN_CHARGE	0x0074 | 
|  | #define TWL4030_BASEADD_PRECHARGE	0x00AA | 
|  | #define TWL4030_BASEADD_PWM		0x00F8 | 
|  | #define TWL4030_BASEADD_KEYPAD		0x00D2 | 
|  |  | 
|  | #define TWL5031_BASEADD_ACCESSORY	0x0074 /* Replaces Main Charge */ | 
|  | #define TWL5031_BASEADD_INTERRUPTS	0x00B9 /* Different than TWL4030's | 
|  | one */ | 
|  |  | 
|  | /* subchip/slave 3 - POWER ID */ | 
|  | #define TWL4030_BASEADD_BACKUP		0x0014 | 
|  | #define TWL4030_BASEADD_INT		0x002E | 
|  | #define TWL4030_BASEADD_PM_MASTER	0x0036 | 
|  | #define TWL4030_BASEADD_PM_RECEIVER	0x005B | 
|  | #define TWL4030_BASEADD_RTC		0x001C | 
|  | #define TWL4030_BASEADD_SECURED_REG	0x0000 | 
|  |  | 
|  | /* Triton Core internal information (END) */ | 
|  |  | 
|  |  | 
|  | /* subchip/slave 0 0x48 - POWER */ | 
|  | #define TWL6030_BASEADD_RTC		0x0000 | 
|  | #define TWL6030_BASEADD_SECURED_REG	0x0017 | 
|  | #define TWL6030_BASEADD_PM_MASTER	0x001F | 
|  | #define TWL6030_BASEADD_PM_SLAVE_MISC	0x0030 /* PM_RECEIVER */ | 
|  | #define TWL6030_BASEADD_PM_MISC		0x00E2 | 
|  | #define TWL6030_BASEADD_PM_PUPD		0x00F0 | 
|  |  | 
|  | /* subchip/slave 1 0x49 - FEATURE */ | 
|  | #define TWL6030_BASEADD_USB		0x0000 | 
|  | #define TWL6030_BASEADD_GPADC_CTRL	0x002E | 
|  | #define TWL6030_BASEADD_AUX		0x0090 | 
|  | #define TWL6030_BASEADD_PWM		0x00BA | 
|  | #define TWL6030_BASEADD_GASGAUGE	0x00C0 | 
|  | #define TWL6030_BASEADD_PIH		0x00D0 | 
|  | #define TWL6030_BASEADD_CHARGER		0x00E0 | 
|  | #define TWL6032_BASEADD_CHARGER		0x00DA | 
|  | #define TWL6030_BASEADD_LED		0x00F4 | 
|  |  | 
|  | /* subchip/slave 2 0x4A - DFT */ | 
|  | #define TWL6030_BASEADD_DIEID		0x00C0 | 
|  |  | 
|  | /* subchip/slave 3 0x4B - AUDIO */ | 
|  | #define TWL6030_BASEADD_AUDIO		0x0000 | 
|  | #define TWL6030_BASEADD_RSV		0x0000 | 
|  | #define TWL6030_BASEADD_ZERO		0x0000 | 
|  |  | 
|  | /* Few power values */ | 
|  | #define R_CFG_BOOT			0x05 | 
|  |  | 
|  | /* some fields in R_CFG_BOOT */ | 
|  | #define HFCLK_FREQ_19p2_MHZ		(1 << 0) | 
|  | #define HFCLK_FREQ_26_MHZ		(2 << 0) | 
|  | #define HFCLK_FREQ_38p4_MHZ		(3 << 0) | 
|  | #define HIGH_PERF_SQ			(1 << 3) | 
|  | #define CK32K_LOWPWR_EN			(1 << 7) | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | /* Structure for each TWL4030/TWL6030 Slave */ | 
|  | struct twl_client { | 
|  | struct i2c_client *client; | 
|  | struct regmap *regmap; | 
|  | }; | 
|  |  | 
|  | /* mapping the module id to slave id and base address */ | 
|  | struct twl_mapping { | 
|  | unsigned char sid;	/* Slave ID */ | 
|  | unsigned char base;	/* base address */ | 
|  | }; | 
|  |  | 
|  | struct twl_private { | 
|  | bool ready; /* The core driver is ready to be used */ | 
|  | u32 twl_idcode; /* TWL IDCODE Register value */ | 
|  | unsigned int twl_id; | 
|  |  | 
|  | struct twl_mapping *twl_map; | 
|  | struct twl_client *twl_modules; | 
|  | }; | 
|  |  | 
|  | static struct twl_private *twl_priv; | 
|  |  | 
|  | static struct twl_mapping twl4030_map[] = { | 
|  | /* | 
|  | * NOTE:  don't change this table without updating the | 
|  | * <linux/i2c/twl.h> defines for TWL4030_MODULE_* | 
|  | * so they continue to match the order in this table. | 
|  | */ | 
|  |  | 
|  | /* Common IPs */ | 
|  | { 0, TWL4030_BASEADD_USB }, | 
|  | { 1, TWL4030_BASEADD_PIH }, | 
|  | { 2, TWL4030_BASEADD_MAIN_CHARGE }, | 
|  | { 3, TWL4030_BASEADD_PM_MASTER }, | 
|  | { 3, TWL4030_BASEADD_PM_RECEIVER }, | 
|  |  | 
|  | { 3, TWL4030_BASEADD_RTC }, | 
|  | { 2, TWL4030_BASEADD_PWM }, | 
|  | { 2, TWL4030_BASEADD_LED }, | 
|  | { 3, TWL4030_BASEADD_SECURED_REG }, | 
|  |  | 
|  | /* TWL4030 specific IPs */ | 
|  | { 1, TWL4030_BASEADD_AUDIO_VOICE }, | 
|  | { 1, TWL4030_BASEADD_GPIO }, | 
|  | { 1, TWL4030_BASEADD_INTBR }, | 
|  | { 1, TWL4030_BASEADD_TEST }, | 
|  | { 2, TWL4030_BASEADD_KEYPAD }, | 
|  |  | 
|  | { 2, TWL4030_BASEADD_MADC }, | 
|  | { 2, TWL4030_BASEADD_INTERRUPTS }, | 
|  | { 2, TWL4030_BASEADD_PRECHARGE }, | 
|  | { 3, TWL4030_BASEADD_BACKUP }, | 
|  | { 3, TWL4030_BASEADD_INT }, | 
|  |  | 
|  | { 2, TWL5031_BASEADD_ACCESSORY }, | 
|  | { 2, TWL5031_BASEADD_INTERRUPTS }, | 
|  | }; | 
|  |  | 
|  | static struct regmap_config twl4030_regmap_config[4] = { | 
|  | { | 
|  | /* Address 0x48 */ | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = 0xff, | 
|  | }, | 
|  | { | 
|  | /* Address 0x49 */ | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = 0xff, | 
|  | }, | 
|  | { | 
|  | /* Address 0x4a */ | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = 0xff, | 
|  | }, | 
|  | { | 
|  | /* Address 0x4b */ | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = 0xff, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct twl_mapping twl6030_map[] = { | 
|  | /* | 
|  | * NOTE:  don't change this table without updating the | 
|  | * <linux/i2c/twl.h> defines for TWL4030_MODULE_* | 
|  | * so they continue to match the order in this table. | 
|  | */ | 
|  |  | 
|  | /* Common IPs */ | 
|  | { 1, TWL6030_BASEADD_USB }, | 
|  | { 1, TWL6030_BASEADD_PIH }, | 
|  | { 1, TWL6030_BASEADD_CHARGER }, | 
|  | { 0, TWL6030_BASEADD_PM_MASTER }, | 
|  | { 0, TWL6030_BASEADD_PM_SLAVE_MISC }, | 
|  |  | 
|  | { 0, TWL6030_BASEADD_RTC }, | 
|  | { 1, TWL6030_BASEADD_PWM }, | 
|  | { 1, TWL6030_BASEADD_LED }, | 
|  | { 0, TWL6030_BASEADD_SECURED_REG }, | 
|  |  | 
|  | /* TWL6030 specific IPs */ | 
|  | { 0, TWL6030_BASEADD_ZERO }, | 
|  | { 1, TWL6030_BASEADD_ZERO }, | 
|  | { 2, TWL6030_BASEADD_ZERO }, | 
|  | { 1, TWL6030_BASEADD_GPADC_CTRL }, | 
|  | { 1, TWL6030_BASEADD_GASGAUGE }, | 
|  | }; | 
|  |  | 
|  | static struct regmap_config twl6030_regmap_config[3] = { | 
|  | { | 
|  | /* Address 0x48 */ | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = 0xff, | 
|  | }, | 
|  | { | 
|  | /* Address 0x49 */ | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = 0xff, | 
|  | }, | 
|  | { | 
|  | /* Address 0x4a */ | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = 0xff, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | static inline int twl_get_num_slaves(void) | 
|  | { | 
|  | if (twl_class_is_4030()) | 
|  | return 4; /* TWL4030 class have four slave address */ | 
|  | else | 
|  | return 3; /* TWL6030 class have three slave address */ | 
|  | } | 
|  |  | 
|  | static inline int twl_get_last_module(void) | 
|  | { | 
|  | if (twl_class_is_4030()) | 
|  | return TWL4030_MODULE_LAST; | 
|  | else | 
|  | return TWL6030_MODULE_LAST; | 
|  | } | 
|  |  | 
|  | /* Exported Functions */ | 
|  |  | 
|  | unsigned int twl_rev(void) | 
|  | { | 
|  | return twl_priv ? twl_priv->twl_id : 0; | 
|  | } | 
|  | EXPORT_SYMBOL(twl_rev); | 
|  |  | 
|  | /** | 
|  | * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0 | 
|  | * @mod_no: module number | 
|  | * @value: an array of num_bytes+1 containing data to write | 
|  | * @reg: register address (just offset will do) | 
|  | * @num_bytes: number of bytes to transfer | 
|  | * | 
|  | * Returns the result of operation - 0 is success | 
|  | */ | 
|  | int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) | 
|  | { | 
|  | int ret; | 
|  | int sid; | 
|  | struct twl_client *twl; | 
|  |  | 
|  | if (unlikely(!twl_priv || !twl_priv->ready)) { | 
|  | pr_err("%s: not initialized\n", DRIVER_NAME); | 
|  | return -EPERM; | 
|  | } | 
|  | if (unlikely(mod_no >= twl_get_last_module())) { | 
|  | pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | sid = twl_priv->twl_map[mod_no].sid; | 
|  | twl = &twl_priv->twl_modules[sid]; | 
|  |  | 
|  | ret = regmap_bulk_write(twl->regmap, | 
|  | twl_priv->twl_map[mod_no].base + reg, value, | 
|  | num_bytes); | 
|  |  | 
|  | if (ret) | 
|  | pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n", | 
|  | DRIVER_NAME, mod_no, reg, num_bytes); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(twl_i2c_write); | 
|  |  | 
|  | /** | 
|  | * twl_i2c_read - Reads a n bit register in TWL4030/TWL5030/TWL60X0 | 
|  | * @mod_no: module number | 
|  | * @value: an array of num_bytes containing data to be read | 
|  | * @reg: register address (just offset will do) | 
|  | * @num_bytes: number of bytes to transfer | 
|  | * | 
|  | * Returns result of operation - num_bytes is success else failure. | 
|  | */ | 
|  | int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) | 
|  | { | 
|  | int ret; | 
|  | int sid; | 
|  | struct twl_client *twl; | 
|  |  | 
|  | if (unlikely(!twl_priv || !twl_priv->ready)) { | 
|  | pr_err("%s: not initialized\n", DRIVER_NAME); | 
|  | return -EPERM; | 
|  | } | 
|  | if (unlikely(mod_no >= twl_get_last_module())) { | 
|  | pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | sid = twl_priv->twl_map[mod_no].sid; | 
|  | twl = &twl_priv->twl_modules[sid]; | 
|  |  | 
|  | ret = regmap_bulk_read(twl->regmap, | 
|  | twl_priv->twl_map[mod_no].base + reg, value, | 
|  | num_bytes); | 
|  |  | 
|  | if (ret) | 
|  | pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n", | 
|  | DRIVER_NAME, mod_no, reg, num_bytes); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(twl_i2c_read); | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | /** | 
|  | * twl_read_idcode_register - API to read the IDCODE register. | 
|  | * | 
|  | * Unlocks the IDCODE register and read the 32 bit value. | 
|  | */ | 
|  | static int twl_read_idcode_register(void) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, TWL_EEPROM_R_UNLOCK, | 
|  | REG_UNLOCK_TEST_REG); | 
|  | if (err) { | 
|  | pr_err("TWL4030 Unable to unlock IDCODE registers -%d\n", err); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | err = twl_i2c_read(TWL4030_MODULE_INTBR, (u8 *)(&twl_priv->twl_idcode), | 
|  | REG_IDCODE_7_0, 4); | 
|  | if (err) { | 
|  | pr_err("TWL4030: unable to read IDCODE -%d\n", err); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, 0x0, REG_UNLOCK_TEST_REG); | 
|  | if (err) | 
|  | pr_err("TWL4030 Unable to relock IDCODE registers -%d\n", err); | 
|  | fail: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * twl_get_type - API to get TWL Si type. | 
|  | * | 
|  | * Api to get the TWL Si type from IDCODE value. | 
|  | */ | 
|  | int twl_get_type(void) | 
|  | { | 
|  | return TWL_SIL_TYPE(twl_priv->twl_idcode); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(twl_get_type); | 
|  |  | 
|  | /** | 
|  | * twl_get_version - API to get TWL Si version. | 
|  | * | 
|  | * Api to get the TWL Si version from IDCODE value. | 
|  | */ | 
|  | int twl_get_version(void) | 
|  | { | 
|  | return TWL_SIL_REV(twl_priv->twl_idcode); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(twl_get_version); | 
|  |  | 
|  | /** | 
|  | * twl_get_hfclk_rate - API to get TWL external HFCLK clock rate. | 
|  | * | 
|  | * Api to get the TWL HFCLK rate based on BOOT_CFG register. | 
|  | */ | 
|  | int twl_get_hfclk_rate(void) | 
|  | { | 
|  | u8 ctrl; | 
|  | int rate; | 
|  |  | 
|  | twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &ctrl, R_CFG_BOOT); | 
|  |  | 
|  | switch (ctrl & 0x3) { | 
|  | case HFCLK_FREQ_19p2_MHZ: | 
|  | rate = 19200000; | 
|  | break; | 
|  | case HFCLK_FREQ_26_MHZ: | 
|  | rate = 26000000; | 
|  | break; | 
|  | case HFCLK_FREQ_38p4_MHZ: | 
|  | rate = 38400000; | 
|  | break; | 
|  | default: | 
|  | pr_err("TWL4030: HFCLK is not configured\n"); | 
|  | rate = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return rate; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(twl_get_hfclk_rate); | 
|  |  | 
|  | static struct device * | 
|  | add_numbered_child(unsigned mod_no, const char *name, int num, | 
|  | void *pdata, unsigned pdata_len, | 
|  | bool can_wakeup, int irq0, int irq1) | 
|  | { | 
|  | struct platform_device	*pdev; | 
|  | struct twl_client	*twl; | 
|  | int			status, sid; | 
|  |  | 
|  | if (unlikely(mod_no >= twl_get_last_module())) { | 
|  | pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); | 
|  | return ERR_PTR(-EPERM); | 
|  | } | 
|  | sid = twl_priv->twl_map[mod_no].sid; | 
|  | twl = &twl_priv->twl_modules[sid]; | 
|  |  | 
|  | pdev = platform_device_alloc(name, num); | 
|  | if (!pdev) { | 
|  | dev_dbg(&twl->client->dev, "can't alloc dev\n"); | 
|  | status = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | pdev->dev.parent = &twl->client->dev; | 
|  |  | 
|  | if (pdata) { | 
|  | status = platform_device_add_data(pdev, pdata, pdata_len); | 
|  | if (status < 0) { | 
|  | dev_dbg(&pdev->dev, "can't add platform_data\n"); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (irq0) { | 
|  | struct resource r[2] = { | 
|  | { .start = irq0, .flags = IORESOURCE_IRQ, }, | 
|  | { .start = irq1, .flags = IORESOURCE_IRQ, }, | 
|  | }; | 
|  |  | 
|  | status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1); | 
|  | if (status < 0) { | 
|  | dev_dbg(&pdev->dev, "can't add irqs\n"); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  |  | 
|  | status = platform_device_add(pdev); | 
|  | if (status == 0) | 
|  | device_init_wakeup(&pdev->dev, can_wakeup); | 
|  |  | 
|  | err: | 
|  | if (status < 0) { | 
|  | platform_device_put(pdev); | 
|  | dev_err(&twl->client->dev, "can't add %s dev\n", name); | 
|  | return ERR_PTR(status); | 
|  | } | 
|  | return &pdev->dev; | 
|  | } | 
|  |  | 
|  | static inline struct device *add_child(unsigned mod_no, const char *name, | 
|  | void *pdata, unsigned pdata_len, | 
|  | bool can_wakeup, int irq0, int irq1) | 
|  | { | 
|  | return add_numbered_child(mod_no, name, -1, pdata, pdata_len, | 
|  | can_wakeup, irq0, irq1); | 
|  | } | 
|  |  | 
|  | static struct device * | 
|  | add_regulator_linked(int num, struct regulator_init_data *pdata, | 
|  | struct regulator_consumer_supply *consumers, | 
|  | unsigned num_consumers, unsigned long features) | 
|  | { | 
|  | struct twl_regulator_driver_data drv_data; | 
|  |  | 
|  | /* regulator framework demands init_data ... */ | 
|  | if (!pdata) | 
|  | return NULL; | 
|  |  | 
|  | if (consumers) { | 
|  | pdata->consumer_supplies = consumers; | 
|  | pdata->num_consumer_supplies = num_consumers; | 
|  | } | 
|  |  | 
|  | if (pdata->driver_data) { | 
|  | /* If we have existing drv_data, just add the flags */ | 
|  | struct twl_regulator_driver_data *tmp; | 
|  | tmp = pdata->driver_data; | 
|  | tmp->features |= features; | 
|  | } else { | 
|  | /* add new driver data struct, used only during init */ | 
|  | drv_data.features = features; | 
|  | drv_data.set_voltage = NULL; | 
|  | drv_data.get_voltage = NULL; | 
|  | drv_data.data = NULL; | 
|  | pdata->driver_data = &drv_data; | 
|  | } | 
|  |  | 
|  | /* NOTE:  we currently ignore regulator IRQs, e.g. for short circuits */ | 
|  | return add_numbered_child(TWL_MODULE_PM_MASTER, "twl_reg", num, | 
|  | pdata, sizeof(*pdata), false, 0, 0); | 
|  | } | 
|  |  | 
|  | static struct device * | 
|  | add_regulator(int num, struct regulator_init_data *pdata, | 
|  | unsigned long features) | 
|  | { | 
|  | return add_regulator_linked(num, pdata, NULL, 0, features); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NOTE:  We know the first 8 IRQs after pdata->base_irq are | 
|  | * for the PIH, and the next are for the PWR_INT SIH, since | 
|  | * that's how twl_init_irq() sets things up. | 
|  | */ | 
|  |  | 
|  | static int | 
|  | add_children(struct twl4030_platform_data *pdata, unsigned irq_base, | 
|  | unsigned long features) | 
|  | { | 
|  | struct device	*child; | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_GPIO_TWL4030) && pdata->gpio) { | 
|  | child = add_child(TWL4030_MODULE_GPIO, "twl4030_gpio", | 
|  | pdata->gpio, sizeof(*pdata->gpio), | 
|  | false, irq_base + GPIO_INTR_OFFSET, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_KEYBOARD_TWL4030) && pdata->keypad) { | 
|  | child = add_child(TWL4030_MODULE_KEYPAD, "twl4030_keypad", | 
|  | pdata->keypad, sizeof(*pdata->keypad), | 
|  | true, irq_base + KEYPAD_INTR_OFFSET, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_TWL4030_MADC) && pdata->madc && | 
|  | twl_class_is_4030()) { | 
|  | child = add_child(TWL4030_MODULE_MADC, "twl4030_madc", | 
|  | pdata->madc, sizeof(*pdata->madc), | 
|  | true, irq_base + MADC_INTR_OFFSET, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_RTC_DRV_TWL4030)) { | 
|  | /* | 
|  | * REVISIT platform_data here currently might expose the | 
|  | * "msecure" line ... but for now we just expect board | 
|  | * setup to tell the chip "it's always ok to SET_TIME". | 
|  | * Eventually, Linux might become more aware of such | 
|  | * HW security concerns, and "least privilege". | 
|  | */ | 
|  | child = add_child(TWL_MODULE_RTC, "twl_rtc", NULL, 0, | 
|  | true, irq_base + RTC_INTR_OFFSET, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_PWM_TWL)) { | 
|  | child = add_child(TWL_MODULE_PWM, "twl-pwm", NULL, 0, | 
|  | false, 0, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_PWM_TWL_LED)) { | 
|  | child = add_child(TWL_MODULE_LED, "twl-pwmled", NULL, 0, | 
|  | false, 0, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_TWL4030_USB) && pdata->usb && | 
|  | twl_class_is_4030()) { | 
|  |  | 
|  | static struct regulator_consumer_supply usb1v5 = { | 
|  | .supply =	"usb1v5", | 
|  | }; | 
|  | static struct regulator_consumer_supply usb1v8 = { | 
|  | .supply =	"usb1v8", | 
|  | }; | 
|  | static struct regulator_consumer_supply usb3v1[] = { | 
|  | { .supply =	"usb3v1" }, | 
|  | { .supply =	"bci3v1" }, | 
|  | }; | 
|  |  | 
|  | /* First add the regulators so that they can be used by transceiver */ | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030)) { | 
|  | /* this is a template that gets copied */ | 
|  | struct regulator_init_data usb_fixed = { | 
|  | .constraints.valid_modes_mask = | 
|  | REGULATOR_MODE_NORMAL | 
|  | | REGULATOR_MODE_STANDBY, | 
|  | .constraints.valid_ops_mask = | 
|  | REGULATOR_CHANGE_MODE | 
|  | | REGULATOR_CHANGE_STATUS, | 
|  | }; | 
|  |  | 
|  | child = add_regulator_linked(TWL4030_REG_VUSB1V5, | 
|  | &usb_fixed, &usb1v5, 1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator_linked(TWL4030_REG_VUSB1V8, | 
|  | &usb_fixed, &usb1v8, 1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator_linked(TWL4030_REG_VUSB3V1, | 
|  | &usb_fixed, usb3v1, 2, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | } | 
|  |  | 
|  | child = add_child(TWL_MODULE_USB, "twl4030_usb", | 
|  | pdata->usb, sizeof(*pdata->usb), true, | 
|  | /* irq0 = USB_PRES, irq1 = USB */ | 
|  | irq_base + USB_PRES_INTR_OFFSET, | 
|  | irq_base + USB_INTR_OFFSET); | 
|  |  | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | /* we need to connect regulators to this transceiver */ | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && child) { | 
|  | usb1v5.dev_name = dev_name(child); | 
|  | usb1v8.dev_name = dev_name(child); | 
|  | usb3v1[0].dev_name = dev_name(child); | 
|  | } | 
|  | } | 
|  | if (IS_ENABLED(CONFIG_TWL6030_USB) && pdata->usb && | 
|  | twl_class_is_6030()) { | 
|  |  | 
|  | static struct regulator_consumer_supply usb3v3; | 
|  | int regulator; | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030)) { | 
|  | /* this is a template that gets copied */ | 
|  | struct regulator_init_data usb_fixed = { | 
|  | .constraints.valid_modes_mask = | 
|  | REGULATOR_MODE_NORMAL | 
|  | | REGULATOR_MODE_STANDBY, | 
|  | .constraints.valid_ops_mask = | 
|  | REGULATOR_CHANGE_MODE | 
|  | | REGULATOR_CHANGE_STATUS, | 
|  | }; | 
|  |  | 
|  | if (features & TWL6032_SUBCLASS) { | 
|  | usb3v3.supply =	"ldousb"; | 
|  | regulator = TWL6032_REG_LDOUSB; | 
|  | } else { | 
|  | usb3v3.supply = "vusb"; | 
|  | regulator = TWL6030_REG_VUSB; | 
|  | } | 
|  | child = add_regulator_linked(regulator, &usb_fixed, | 
|  | &usb3v3, 1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | pdata->usb->features = features; | 
|  |  | 
|  | child = add_child(TWL_MODULE_USB, "twl6030_usb", | 
|  | pdata->usb, sizeof(*pdata->usb), true, | 
|  | /* irq1 = VBUS_PRES, irq0 = USB ID */ | 
|  | irq_base + USBOTG_INTR_OFFSET, | 
|  | irq_base + USB_PRES_INTR_OFFSET); | 
|  |  | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | /* we need to connect regulators to this transceiver */ | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && child) | 
|  | usb3v3.dev_name = dev_name(child); | 
|  | } else if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && | 
|  | twl_class_is_6030()) { | 
|  | if (features & TWL6032_SUBCLASS) | 
|  | child = add_regulator(TWL6032_REG_LDOUSB, | 
|  | pdata->ldousb, features); | 
|  | else | 
|  | child = add_regulator(TWL6030_REG_VUSB, | 
|  | pdata->vusb, features); | 
|  |  | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_TWL4030_WATCHDOG) && twl_class_is_4030()) { | 
|  | child = add_child(TWL_MODULE_PM_RECEIVER, "twl4030_wdt", NULL, | 
|  | 0, false, 0, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_INPUT_TWL4030_PWRBUTTON) && twl_class_is_4030()) { | 
|  | child = add_child(TWL_MODULE_PM_MASTER, "twl4030_pwrbutton", | 
|  | NULL, 0, true, irq_base + 8 + 0, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_MFD_TWL4030_AUDIO) && pdata->audio && | 
|  | twl_class_is_4030()) { | 
|  | child = add_child(TWL4030_MODULE_AUDIO_VOICE, "twl4030-audio", | 
|  | pdata->audio, sizeof(*pdata->audio), | 
|  | false, 0, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | /* twl4030 regulators */ | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_4030()) { | 
|  | child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VIO, pdata->vio, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VDD1, pdata->vdd1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VDD2, pdata->vdd2, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VDAC, pdata->vdac, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator((features & TWL4030_VAUX2) | 
|  | ? TWL4030_REG_VAUX2_4030 | 
|  | : TWL4030_REG_VAUX2, | 
|  | pdata->vaux2, features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VINTANA1, pdata->vintana1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VINTANA2, pdata->vintana2, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VINTDIG, pdata->vintdig, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | /* maybe add LDOs that are omitted on cost-reduced parts */ | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && !(features & TPS_SUBSET) | 
|  | && twl_class_is_4030()) { | 
|  | child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VMMC2, pdata->vmmc2, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VSIM, pdata->vsim, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VAUX1, pdata->vaux1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VAUX3, pdata->vaux3, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL4030_REG_VAUX4, pdata->vaux4, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | /* twl6030 regulators */ | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030() && | 
|  | !(features & TWL6032_SUBCLASS)) { | 
|  | child = add_regulator(TWL6030_REG_VDD1, pdata->vdd1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VDD2, pdata->vdd2, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VDD3, pdata->vdd3, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_V1V8, pdata->v1v8, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_V2V1, pdata->v2v1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VMMC, pdata->vmmc, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VPP, pdata->vpp, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VUSIM, pdata->vusim, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VCXIO, pdata->vcxio, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VDAC, pdata->vdac, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VAUX1_6030, pdata->vaux1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VAUX2_6030, pdata->vaux2, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_VAUX3_6030, pdata->vaux3, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6030_REG_CLK32KG, pdata->clk32kg, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | /* 6030 and 6025 share this regulator */ | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030()) { | 
|  | child = add_regulator(TWL6030_REG_VANA, pdata->vana, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | /* twl6032 regulators */ | 
|  | if (IS_ENABLED(CONFIG_REGULATOR_TWL4030) && twl_class_is_6030() && | 
|  | (features & TWL6032_SUBCLASS)) { | 
|  | child = add_regulator(TWL6032_REG_LDO5, pdata->ldo5, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_LDO1, pdata->ldo1, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_LDO7, pdata->ldo7, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_LDO6, pdata->ldo6, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_LDOLN, pdata->ldoln, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_LDO2, pdata->ldo2, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_LDO4, pdata->ldo4, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_LDO3, pdata->ldo3, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_SMPS3, pdata->smps3, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_SMPS4, pdata->smps4, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | child = add_regulator(TWL6032_REG_VIO, pdata->vio6025, | 
|  | features); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  |  | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_CHARGER_TWL4030) && pdata->bci && | 
|  | !(features & (TPS_SUBSET | TWL5031))) { | 
|  | child = add_child(TWL_MODULE_MAIN_CHARGE, "twl4030_bci", | 
|  | pdata->bci, sizeof(*pdata->bci), false, | 
|  | /* irq0 = CHG_PRES, irq1 = BCI */ | 
|  | irq_base + BCI_PRES_INTR_OFFSET, | 
|  | irq_base + BCI_INTR_OFFSET); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_TWL4030_POWER) && pdata->power) { | 
|  | child = add_child(TWL_MODULE_PM_MASTER, "twl4030_power", | 
|  | pdata->power, sizeof(*pdata->power), false, | 
|  | 0, 0); | 
|  | if (IS_ERR(child)) | 
|  | return PTR_ERR(child); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | /* | 
|  | * These three functions initialize the on-chip clock framework, | 
|  | * letting it generate the right frequencies for USB, MADC, and | 
|  | * other purposes. | 
|  | */ | 
|  | static inline int __init protect_pm_master(void) | 
|  | { | 
|  | int e = 0; | 
|  |  | 
|  | e = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, | 
|  | TWL4030_PM_MASTER_PROTECT_KEY); | 
|  | return e; | 
|  | } | 
|  |  | 
|  | static inline int __init unprotect_pm_master(void) | 
|  | { | 
|  | int e = 0; | 
|  |  | 
|  | e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, | 
|  | TWL4030_PM_MASTER_PROTECT_KEY); | 
|  | e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, | 
|  | TWL4030_PM_MASTER_PROTECT_KEY); | 
|  |  | 
|  | return e; | 
|  | } | 
|  |  | 
|  | static void clocks_init(struct device *dev, | 
|  | struct twl4030_clock_init_data *clock) | 
|  | { | 
|  | int e = 0; | 
|  | struct clk *osc; | 
|  | u32 rate; | 
|  | u8 ctrl = HFCLK_FREQ_26_MHZ; | 
|  |  | 
|  | osc = clk_get(dev, "fck"); | 
|  | if (IS_ERR(osc)) { | 
|  | printk(KERN_WARNING "Skipping twl internal clock init and " | 
|  | "using bootloader value (unknown osc rate)\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rate = clk_get_rate(osc); | 
|  | clk_put(osc); | 
|  |  | 
|  | switch (rate) { | 
|  | case 19200000: | 
|  | ctrl = HFCLK_FREQ_19p2_MHZ; | 
|  | break; | 
|  | case 26000000: | 
|  | ctrl = HFCLK_FREQ_26_MHZ; | 
|  | break; | 
|  | case 38400000: | 
|  | ctrl = HFCLK_FREQ_38p4_MHZ; | 
|  | break; | 
|  | } | 
|  |  | 
|  | ctrl |= HIGH_PERF_SQ; | 
|  | if (clock && clock->ck32k_lowpwr_enable) | 
|  | ctrl |= CK32K_LOWPWR_EN; | 
|  |  | 
|  | e |= unprotect_pm_master(); | 
|  | /* effect->MADC+USB ck en */ | 
|  | e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT); | 
|  | e |= protect_pm_master(); | 
|  |  | 
|  | if (e < 0) | 
|  | pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  |  | 
|  | static int twl_remove(struct i2c_client *client) | 
|  | { | 
|  | unsigned i, num_slaves; | 
|  | int status; | 
|  |  | 
|  | if (twl_class_is_4030()) | 
|  | status = twl4030_exit_irq(); | 
|  | else | 
|  | status = twl6030_exit_irq(); | 
|  |  | 
|  | if (status < 0) | 
|  | return status; | 
|  |  | 
|  | num_slaves = twl_get_num_slaves(); | 
|  | for (i = 0; i < num_slaves; i++) { | 
|  | struct twl_client	*twl = &twl_priv->twl_modules[i]; | 
|  |  | 
|  | if (twl->client && twl->client != client) | 
|  | i2c_unregister_device(twl->client); | 
|  | twl->client = NULL; | 
|  | } | 
|  | twl_priv->ready = false; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* NOTE: This driver only handles a single twl4030/tps659x0 chip */ | 
|  | static int | 
|  | twl_probe(struct i2c_client *client, const struct i2c_device_id *id) | 
|  | { | 
|  | struct twl4030_platform_data	*pdata = client->dev.platform_data; | 
|  | struct device_node		*node = client->dev.of_node; | 
|  | struct platform_device		*pdev; | 
|  | struct regmap_config		*twl_regmap_config; | 
|  | int				irq_base = 0; | 
|  | int				status; | 
|  | unsigned			i, num_slaves; | 
|  |  | 
|  | if (!node && !pdata) { | 
|  | dev_err(&client->dev, "no platform data\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (twl_priv) { | 
|  | dev_dbg(&client->dev, "only one instance of %s allowed\n", | 
|  | DRIVER_NAME); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | pdev = platform_device_alloc(DRIVER_NAME, -1); | 
|  | if (!pdev) { | 
|  | dev_err(&client->dev, "can't alloc pdev\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | status = platform_device_add(pdev); | 
|  | if (status) { | 
|  | platform_device_put(pdev); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { | 
|  | dev_dbg(&client->dev, "can't talk I2C?\n"); | 
|  | status = -EIO; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | twl_priv = devm_kzalloc(&client->dev, sizeof(struct twl_private), | 
|  | GFP_KERNEL); | 
|  | if (!twl_priv) { | 
|  | status = -ENOMEM; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | if ((id->driver_data) & TWL6030_CLASS) { | 
|  | twl_priv->twl_id = TWL6030_CLASS_ID; | 
|  | twl_priv->twl_map = &twl6030_map[0]; | 
|  | /* The charger base address is different in twl6032 */ | 
|  | if ((id->driver_data) & TWL6032_SUBCLASS) | 
|  | twl_priv->twl_map[TWL_MODULE_MAIN_CHARGE].base = | 
|  | TWL6032_BASEADD_CHARGER; | 
|  | twl_regmap_config = twl6030_regmap_config; | 
|  | } else { | 
|  | twl_priv->twl_id = TWL4030_CLASS_ID; | 
|  | twl_priv->twl_map = &twl4030_map[0]; | 
|  | twl_regmap_config = twl4030_regmap_config; | 
|  | } | 
|  |  | 
|  | num_slaves = twl_get_num_slaves(); | 
|  | twl_priv->twl_modules = devm_kzalloc(&client->dev, | 
|  | sizeof(struct twl_client) * num_slaves, | 
|  | GFP_KERNEL); | 
|  | if (!twl_priv->twl_modules) { | 
|  | status = -ENOMEM; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < num_slaves; i++) { | 
|  | struct twl_client *twl = &twl_priv->twl_modules[i]; | 
|  |  | 
|  | if (i == 0) { | 
|  | twl->client = client; | 
|  | } else { | 
|  | twl->client = i2c_new_dummy(client->adapter, | 
|  | client->addr + i); | 
|  | if (!twl->client) { | 
|  | dev_err(&client->dev, | 
|  | "can't attach client %d\n", i); | 
|  | status = -ENOMEM; | 
|  | goto fail; | 
|  | } | 
|  | } | 
|  |  | 
|  | twl->regmap = devm_regmap_init_i2c(twl->client, | 
|  | &twl_regmap_config[i]); | 
|  | if (IS_ERR(twl->regmap)) { | 
|  | status = PTR_ERR(twl->regmap); | 
|  | dev_err(&client->dev, | 
|  | "Failed to allocate regmap %d, err: %d\n", i, | 
|  | status); | 
|  | goto fail; | 
|  | } | 
|  | } | 
|  |  | 
|  | twl_priv->ready = true; | 
|  |  | 
|  | /* setup clock framework */ | 
|  | clocks_init(&pdev->dev, pdata ? pdata->clock : NULL); | 
|  |  | 
|  | /* read TWL IDCODE Register */ | 
|  | if (twl_class_is_4030()) { | 
|  | status = twl_read_idcode_register(); | 
|  | WARN(status < 0, "Error: reading twl_idcode register value\n"); | 
|  | } | 
|  |  | 
|  | /* Maybe init the T2 Interrupt subsystem */ | 
|  | if (client->irq) { | 
|  | if (twl_class_is_4030()) { | 
|  | twl4030_init_chip_irq(id->name); | 
|  | irq_base = twl4030_init_irq(&client->dev, client->irq); | 
|  | } else { | 
|  | irq_base = twl6030_init_irq(&client->dev, client->irq); | 
|  | } | 
|  |  | 
|  | if (irq_base < 0) { | 
|  | status = irq_base; | 
|  | goto fail; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface. | 
|  | * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0, | 
|  | * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0. | 
|  | */ | 
|  | if (twl_class_is_4030()) { | 
|  | u8 temp; | 
|  |  | 
|  | twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1); | 
|  | temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \ | 
|  | I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU); | 
|  | twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1); | 
|  | } | 
|  |  | 
|  | if (node) | 
|  | status = of_platform_populate(node, NULL, NULL, &client->dev); | 
|  | else | 
|  | status = add_children(pdata, irq_base, id->driver_data); | 
|  |  | 
|  | fail: | 
|  | if (status < 0) | 
|  | twl_remove(client); | 
|  | free: | 
|  | if (status < 0) | 
|  | platform_device_unregister(pdev); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id twl_ids[] = { | 
|  | { "twl4030", TWL4030_VAUX2 },	/* "Triton 2" */ | 
|  | { "twl5030", 0 },		/* T2 updated */ | 
|  | { "twl5031", TWL5031 },		/* TWL5030 updated */ | 
|  | { "tps65950", 0 },		/* catalog version of twl5030 */ | 
|  | { "tps65930", TPS_SUBSET },	/* fewer LDOs and DACs; no charger */ | 
|  | { "tps65920", TPS_SUBSET },	/* fewer LDOs; no codec or charger */ | 
|  | { "tps65921", TPS_SUBSET },	/* fewer LDOs; no codec, no LED | 
|  | and vibrator. Charger in USB module*/ | 
|  | { "twl6030", TWL6030_CLASS },	/* "Phoenix power chip" */ | 
|  | { "twl6032", TWL6030_CLASS | TWL6032_SUBCLASS }, /* "Phoenix lite" */ | 
|  | { /* end of list */ }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, twl_ids); | 
|  |  | 
|  | /* One Client Driver , 4 Clients */ | 
|  | static struct i2c_driver twl_driver = { | 
|  | .driver.name	= DRIVER_NAME, | 
|  | .id_table	= twl_ids, | 
|  | .probe		= twl_probe, | 
|  | .remove		= twl_remove, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(twl_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Texas Instruments, Inc."); | 
|  | MODULE_DESCRIPTION("I2C Core interface for TWL"); | 
|  | MODULE_LICENSE("GPL"); |