|  | /** | 
|  | * gadget.h - DesignWare USB3 DRD Gadget Header | 
|  | * | 
|  | * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com | 
|  | * | 
|  | * Authors: Felipe Balbi <balbi@ti.com>, | 
|  | *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 
|  | * | 
|  | * This program is free software: you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2  of | 
|  | * the License as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #ifndef __DRIVERS_USB_DWC3_GADGET_H | 
|  | #define __DRIVERS_USB_DWC3_GADGET_H | 
|  |  | 
|  | #include <linux/list.h> | 
|  | #include <linux/usb/gadget.h> | 
|  | #include "io.h" | 
|  |  | 
|  | struct dwc3; | 
|  | #define to_dwc3_ep(ep)		(container_of(ep, struct dwc3_ep, endpoint)) | 
|  | #define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget)) | 
|  |  | 
|  | /* DEPCFG parameter 1 */ | 
|  | #define DWC3_DEPCFG_INT_NUM(n)		((n) << 0) | 
|  | #define DWC3_DEPCFG_XFER_COMPLETE_EN	(1 << 8) | 
|  | #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	(1 << 9) | 
|  | #define DWC3_DEPCFG_XFER_NOT_READY_EN	(1 << 10) | 
|  | #define DWC3_DEPCFG_FIFO_ERROR_EN	(1 << 11) | 
|  | #define DWC3_DEPCFG_STREAM_EVENT_EN	(1 << 13) | 
|  | #define DWC3_DEPCFG_BINTERVAL_M1(n)	((n) << 16) | 
|  | #define DWC3_DEPCFG_STREAM_CAPABLE	(1 << 24) | 
|  | #define DWC3_DEPCFG_EP_NUMBER(n)	((n) << 25) | 
|  | #define DWC3_DEPCFG_BULK_BASED		(1 << 30) | 
|  | #define DWC3_DEPCFG_FIFO_BASED		(1 << 31) | 
|  |  | 
|  | /* DEPCFG parameter 0 */ | 
|  | #define DWC3_DEPCFG_EP_TYPE(n)		((n) << 1) | 
|  | #define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	((n) << 3) | 
|  | #define DWC3_DEPCFG_FIFO_NUMBER(n)	((n) << 17) | 
|  | #define DWC3_DEPCFG_BURST_SIZE(n)	((n) << 22) | 
|  | #define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26) | 
|  | /* This applies for core versions earlier than 1.94a */ | 
|  | #define DWC3_DEPCFG_IGN_SEQ_NUM		(1 << 31) | 
|  | /* These apply for core versions 1.94a and later */ | 
|  | #define DWC3_DEPCFG_ACTION_INIT		(0 << 30) | 
|  | #define DWC3_DEPCFG_ACTION_RESTORE	(1 << 30) | 
|  | #define DWC3_DEPCFG_ACTION_MODIFY	(2 << 30) | 
|  |  | 
|  | /* DEPXFERCFG parameter 0 */ | 
|  | #define DWC3_DEPXFERCFG_NUM_XFER_RES(n)	((n) & 0xffff) | 
|  |  | 
|  | struct dwc3_gadget_ep_cmd_params { | 
|  | u32	param2; | 
|  | u32	param1; | 
|  | u32	param0; | 
|  | }; | 
|  |  | 
|  | /* -------------------------------------------------------------------------- */ | 
|  |  | 
|  | #define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request)) | 
|  |  | 
|  | static inline struct dwc3_request *next_request(struct list_head *list) | 
|  | { | 
|  | if (list_empty(list)) | 
|  | return NULL; | 
|  |  | 
|  | return list_first_entry(list, struct dwc3_request, list); | 
|  | } | 
|  |  | 
|  | static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req) | 
|  | { | 
|  | struct dwc3_ep		*dep = req->dep; | 
|  |  | 
|  | req->queued = true; | 
|  | list_move_tail(&req->list, &dep->req_queued); | 
|  | } | 
|  |  | 
|  | void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, | 
|  | int status); | 
|  |  | 
|  | int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); | 
|  | int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); | 
|  |  | 
|  | void dwc3_ep0_interrupt(struct dwc3 *dwc, | 
|  | const struct dwc3_event_depevt *event); | 
|  | void dwc3_ep0_out_start(struct dwc3 *dwc); | 
|  | int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value); | 
|  | int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, | 
|  | gfp_t gfp_flags); | 
|  | int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); | 
|  | int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, | 
|  | unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); | 
|  | int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param); | 
|  |  | 
|  | /** | 
|  | * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW | 
|  | * @dwc: DesignWare USB3 Pointer | 
|  | * @number: DWC endpoint number | 
|  | * | 
|  | * Caller should take care of locking | 
|  | */ | 
|  | static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number) | 
|  | { | 
|  | u32			res_id; | 
|  |  | 
|  | res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number)); | 
|  |  | 
|  | return DWC3_DEPCMD_GET_RSC_IDX(res_id); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * dwc3_gadget_event_string - returns event name | 
|  | * @event: the event code | 
|  | */ | 
|  | static inline const char *dwc3_gadget_event_string(u8 event) | 
|  | { | 
|  | switch (event) { | 
|  | case DWC3_DEVICE_EVENT_DISCONNECT: | 
|  | return "Disconnect"; | 
|  | case DWC3_DEVICE_EVENT_RESET: | 
|  | return "Reset"; | 
|  | case DWC3_DEVICE_EVENT_CONNECT_DONE: | 
|  | return "Connection Done"; | 
|  | case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: | 
|  | return "Link Status Change"; | 
|  | case DWC3_DEVICE_EVENT_WAKEUP: | 
|  | return "WakeUp"; | 
|  | case DWC3_DEVICE_EVENT_EOPF: | 
|  | return "End-Of-Frame"; | 
|  | case DWC3_DEVICE_EVENT_SOF: | 
|  | return "Start-Of-Frame"; | 
|  | case DWC3_DEVICE_EVENT_ERRATIC_ERROR: | 
|  | return "Erratic Error"; | 
|  | case DWC3_DEVICE_EVENT_CMD_CMPL: | 
|  | return "Command Complete"; | 
|  | case DWC3_DEVICE_EVENT_OVERFLOW: | 
|  | return "Overflow"; | 
|  | } | 
|  |  | 
|  | return "UNKNOWN"; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * dwc3_ep_event_string - returns event name | 
|  | * @event: then event code | 
|  | */ | 
|  | static inline const char *dwc3_ep_event_string(u8 event) | 
|  | { | 
|  | switch (event) { | 
|  | case DWC3_DEPEVT_XFERCOMPLETE: | 
|  | return "Transfer Complete"; | 
|  | case DWC3_DEPEVT_XFERINPROGRESS: | 
|  | return "Transfer In-Progress"; | 
|  | case DWC3_DEPEVT_XFERNOTREADY: | 
|  | return "Transfer Not Ready"; | 
|  | case DWC3_DEPEVT_RXTXFIFOEVT: | 
|  | return "FIFO"; | 
|  | case DWC3_DEPEVT_STREAMEVT: | 
|  | return "Stream"; | 
|  | case DWC3_DEPEVT_EPCMDCMPLT: | 
|  | return "Endpoint Command Complete"; | 
|  | } | 
|  |  | 
|  | return "UNKNOWN"; | 
|  | } | 
|  |  | 
|  | #endif /* __DRIVERS_USB_DWC3_GADGET_H */ |