| /* |
| * Microblaze support for cache consistent memory. |
| * Copyright (C) 2010 Michal Simek <monstr@monstr.eu> |
| * Copyright (C) 2010 PetaLogix |
| * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au> |
| * |
| * Based on PowerPC version derived from arch/arm/mm/consistent.c |
| * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) |
| * Copyright (C) 2000 Russell King |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/ptrace.h> |
| #include <linux/mman.h> |
| #include <linux/mm.h> |
| #include <linux/swap.h> |
| #include <linux/stddef.h> |
| #include <linux/vmalloc.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/bootmem.h> |
| #include <linux/highmem.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/gfp.h> |
| |
| #include <asm/pgalloc.h> |
| #include <linux/io.h> |
| #include <linux/hardirq.h> |
| #include <linux/mmu_context.h> |
| #include <asm/mmu.h> |
| #include <linux/uaccess.h> |
| #include <asm/pgtable.h> |
| #include <asm/cpuinfo.h> |
| #include <asm/tlbflush.h> |
| |
| #ifndef CONFIG_MMU |
| /* I have to use dcache values because I can't relate on ram size */ |
| # define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1) |
| #endif |
| |
| /* |
| * Consistent memory allocators. Used for DMA devices that want to |
| * share uncached memory with the processor core. |
| * My crufty no-MMU approach is simple. In the HW platform we can optionally |
| * mirror the DDR up above the processor cacheable region. So, memory accessed |
| * in this mirror region will not be cached. It's alloced from the same |
| * pool as normal memory, but the handle we return is shifted up into the |
| * uncached region. This will no doubt cause big problems if memory allocated |
| * here is not also freed properly. -- JW |
| */ |
| void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle) |
| { |
| unsigned long order, vaddr; |
| void *ret; |
| unsigned int i, err = 0; |
| struct page *page, *end; |
| |
| #ifdef CONFIG_MMU |
| phys_addr_t pa; |
| struct vm_struct *area; |
| unsigned long va; |
| #endif |
| |
| if (in_interrupt()) |
| BUG(); |
| |
| /* Only allocate page size areas. */ |
| size = PAGE_ALIGN(size); |
| order = get_order(size); |
| |
| vaddr = __get_free_pages(gfp, order); |
| if (!vaddr) |
| return NULL; |
| |
| /* |
| * we need to ensure that there are no cachelines in use, |
| * or worse dirty in this area. |
| */ |
| flush_dcache_range(virt_to_phys((void *)vaddr), |
| virt_to_phys((void *)vaddr) + size); |
| |
| #ifndef CONFIG_MMU |
| ret = (void *)vaddr; |
| /* |
| * Here's the magic! Note if the uncached shadow is not implemented, |
| * it's up to the calling code to also test that condition and make |
| * other arranegments, such as manually flushing the cache and so on. |
| */ |
| # ifdef CONFIG_XILINX_UNCACHED_SHADOW |
| ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK); |
| # endif |
| if ((unsigned int)ret > cpuinfo.dcache_base && |
| (unsigned int)ret < cpuinfo.dcache_high) |
| pr_warn("ERROR: Your cache coherent area is CACHED!!!\n"); |
| |
| /* dma_handle is same as physical (shadowed) address */ |
| *dma_handle = (dma_addr_t)ret; |
| #else |
| /* Allocate some common virtual space to map the new pages. */ |
| area = get_vm_area(size, VM_ALLOC); |
| if (!area) { |
| free_pages(vaddr, order); |
| return NULL; |
| } |
| va = (unsigned long) area->addr; |
| ret = (void *)va; |
| |
| /* This gives us the real physical address of the first page. */ |
| *dma_handle = pa = virt_to_bus((void *)vaddr); |
| #endif |
| |
| /* |
| * free wasted pages. We skip the first page since we know |
| * that it will have count = 1 and won't require freeing. |
| * We also mark the pages in use as reserved so that |
| * remap_page_range works. |
| */ |
| page = virt_to_page(vaddr); |
| end = page + (1 << order); |
| |
| split_page(page, order); |
| |
| for (i = 0; i < size && err == 0; i += PAGE_SIZE) { |
| #ifdef CONFIG_MMU |
| /* MS: This is the whole magic - use cache inhibit pages */ |
| err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE); |
| #endif |
| |
| SetPageReserved(page); |
| page++; |
| } |
| |
| /* Free the otherwise unused pages. */ |
| while (page < end) { |
| __free_page(page); |
| page++; |
| } |
| |
| if (err) { |
| free_pages(vaddr, order); |
| return NULL; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(consistent_alloc); |
| |
| /* |
| * free page(s) as defined by the above mapping. |
| */ |
| void consistent_free(size_t size, void *vaddr) |
| { |
| struct page *page; |
| |
| if (in_interrupt()) |
| BUG(); |
| |
| size = PAGE_ALIGN(size); |
| |
| #ifndef CONFIG_MMU |
| /* Clear SHADOW_MASK bit in address, and free as per usual */ |
| # ifdef CONFIG_XILINX_UNCACHED_SHADOW |
| vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK); |
| # endif |
| page = virt_to_page(vaddr); |
| |
| do { |
| __free_reserved_page(page); |
| page++; |
| } while (size -= PAGE_SIZE); |
| #else |
| do { |
| pte_t *ptep; |
| unsigned long pfn; |
| |
| ptep = pte_offset_kernel(pmd_offset(pgd_offset_k( |
| (unsigned int)vaddr), |
| (unsigned int)vaddr), |
| (unsigned int)vaddr); |
| if (!pte_none(*ptep) && pte_present(*ptep)) { |
| pfn = pte_pfn(*ptep); |
| pte_clear(&init_mm, (unsigned int)vaddr, ptep); |
| if (pfn_valid(pfn)) { |
| page = pfn_to_page(pfn); |
| __free_reserved_page(page); |
| } |
| } |
| vaddr += PAGE_SIZE; |
| } while (size -= PAGE_SIZE); |
| |
| /* flush tlb */ |
| flush_tlb_all(); |
| #endif |
| } |
| EXPORT_SYMBOL(consistent_free); |
| |
| /* |
| * make an area consistent. |
| */ |
| void consistent_sync(void *vaddr, size_t size, int direction) |
| { |
| unsigned long start; |
| unsigned long end; |
| |
| start = (unsigned long)vaddr; |
| |
| /* Convert start address back down to unshadowed memory region */ |
| #ifdef CONFIG_XILINX_UNCACHED_SHADOW |
| start &= ~UNCACHED_SHADOW_MASK; |
| #endif |
| end = start + size; |
| |
| switch (direction) { |
| case PCI_DMA_NONE: |
| BUG(); |
| case PCI_DMA_FROMDEVICE: /* invalidate only */ |
| invalidate_dcache_range(start, end); |
| break; |
| case PCI_DMA_TODEVICE: /* writeback only */ |
| flush_dcache_range(start, end); |
| break; |
| case PCI_DMA_BIDIRECTIONAL: /* writeback and invalidate */ |
| flush_dcache_range(start, end); |
| break; |
| } |
| } |
| EXPORT_SYMBOL(consistent_sync); |
| |
| /* |
| * consistent_sync_page makes memory consistent. identical |
| * to consistent_sync, but takes a struct page instead of a |
| * virtual address |
| */ |
| void consistent_sync_page(struct page *page, unsigned long offset, |
| size_t size, int direction) |
| { |
| unsigned long start = (unsigned long)page_address(page) + offset; |
| consistent_sync((void *)start, size, direction); |
| } |
| EXPORT_SYMBOL(consistent_sync_page); |