|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * Portions of this file are derived from the ipw3945 project, as well | 
|  | * as portions of the ieee80211 subsystem header files. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <ilw@linux.intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/if_arp.h> | 
|  |  | 
|  | #include <net/ieee80211_radiotap.h> | 
|  | #include <net/mac80211.h> | 
|  |  | 
|  | #include <asm/div64.h> | 
|  |  | 
|  | #include "iwl-io.h" | 
|  | #include "iwl-trans.h" | 
|  | #include "iwl-op-mode.h" | 
|  | #include "iwl-modparams.h" | 
|  |  | 
|  | #include "dev.h" | 
|  | #include "calib.h" | 
|  | #include "agn.h" | 
|  |  | 
|  | /***************************************************************************** | 
|  | * | 
|  | * mac80211 entry point functions | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = { | 
|  | { | 
|  | .max = 1, | 
|  | .types = BIT(NL80211_IFTYPE_STATION), | 
|  | }, | 
|  | { | 
|  | .max = 1, | 
|  | .types = BIT(NL80211_IFTYPE_AP), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = { | 
|  | { | 
|  | .max = 2, | 
|  | .types = BIT(NL80211_IFTYPE_STATION), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_combination | 
|  | iwlagn_iface_combinations_dualmode[] = { | 
|  | { .num_different_channels = 1, | 
|  | .max_interfaces = 2, | 
|  | .beacon_int_infra_match = true, | 
|  | .limits = iwlagn_sta_ap_limits, | 
|  | .n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits), | 
|  | }, | 
|  | { .num_different_channels = 1, | 
|  | .max_interfaces = 2, | 
|  | .limits = iwlagn_2sta_limits, | 
|  | .n_limits = ARRAY_SIZE(iwlagn_2sta_limits), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Not a mac80211 entry point function, but it fits in with all the | 
|  | * other mac80211 functions grouped here. | 
|  | */ | 
|  | int iwlagn_mac_setup_register(struct iwl_priv *priv, | 
|  | const struct iwl_ucode_capabilities *capa) | 
|  | { | 
|  | int ret; | 
|  | struct ieee80211_hw *hw = priv->hw; | 
|  | struct iwl_rxon_context *ctx; | 
|  |  | 
|  | hw->rate_control_algorithm = "iwl-agn-rs"; | 
|  |  | 
|  | /* Tell mac80211 our characteristics */ | 
|  | hw->flags = IEEE80211_HW_SIGNAL_DBM | | 
|  | IEEE80211_HW_AMPDU_AGGREGATION | | 
|  | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | | 
|  | IEEE80211_HW_SPECTRUM_MGMT | | 
|  | IEEE80211_HW_REPORTS_TX_ACK_STATUS | | 
|  | IEEE80211_HW_QUEUE_CONTROL | | 
|  | IEEE80211_HW_SUPPORTS_PS | | 
|  | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | | 
|  | IEEE80211_HW_WANT_MONITOR_VIF; | 
|  |  | 
|  | hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE; | 
|  | hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT; | 
|  |  | 
|  | /* | 
|  | * Including the following line will crash some AP's.  This | 
|  | * workaround removes the stimulus which causes the crash until | 
|  | * the AP software can be fixed. | 
|  | hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF; | 
|  | */ | 
|  |  | 
|  | if (priv->nvm_data->sku_cap_11n_enable) | 
|  | hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | | 
|  | IEEE80211_HW_SUPPORTS_STATIC_SMPS; | 
|  |  | 
|  | /* | 
|  | * Enable 11w if advertised by firmware and software crypto | 
|  | * is not enabled (as the firmware will interpret some mgmt | 
|  | * packets, so enabling it with software crypto isn't safe) | 
|  | */ | 
|  | if (priv->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_MFP && | 
|  | !iwlwifi_mod_params.sw_crypto) | 
|  | hw->flags |= IEEE80211_HW_MFP_CAPABLE; | 
|  |  | 
|  | hw->sta_data_size = sizeof(struct iwl_station_priv); | 
|  | hw->vif_data_size = sizeof(struct iwl_vif_priv); | 
|  |  | 
|  | for_each_context(priv, ctx) { | 
|  | hw->wiphy->interface_modes |= ctx->interface_modes; | 
|  | hw->wiphy->interface_modes |= ctx->exclusive_interface_modes; | 
|  | } | 
|  |  | 
|  | BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); | 
|  |  | 
|  | if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { | 
|  | hw->wiphy->iface_combinations = | 
|  | iwlagn_iface_combinations_dualmode; | 
|  | hw->wiphy->n_iface_combinations = | 
|  | ARRAY_SIZE(iwlagn_iface_combinations_dualmode); | 
|  | } | 
|  |  | 
|  | hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; | 
|  | hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | | 
|  | REGULATORY_DISABLE_BEACON_HINTS; | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len && | 
|  | priv->trans->ops->d3_suspend && | 
|  | priv->trans->ops->d3_resume && | 
|  | device_can_wakeup(priv->trans->dev)) { | 
|  | priv->wowlan_support.flags = WIPHY_WOWLAN_MAGIC_PKT | | 
|  | WIPHY_WOWLAN_DISCONNECT | | 
|  | WIPHY_WOWLAN_EAP_IDENTITY_REQ | | 
|  | WIPHY_WOWLAN_RFKILL_RELEASE; | 
|  | if (!iwlwifi_mod_params.sw_crypto) | 
|  | priv->wowlan_support.flags |= | 
|  | WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | | 
|  | WIPHY_WOWLAN_GTK_REKEY_FAILURE; | 
|  |  | 
|  | priv->wowlan_support.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS; | 
|  | priv->wowlan_support.pattern_min_len = | 
|  | IWLAGN_WOWLAN_MIN_PATTERN_LEN; | 
|  | priv->wowlan_support.pattern_max_len = | 
|  | IWLAGN_WOWLAN_MAX_PATTERN_LEN; | 
|  | hw->wiphy->wowlan = &priv->wowlan_support; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (iwlwifi_mod_params.power_save) | 
|  | hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; | 
|  | else | 
|  | hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; | 
|  |  | 
|  | hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; | 
|  | /* we create the 802.11 header and a max-length SSID element */ | 
|  | hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 34; | 
|  |  | 
|  | /* | 
|  | * We don't use all queues: 4 and 9 are unused and any | 
|  | * aggregation queue gets mapped down to the AC queue. | 
|  | */ | 
|  | hw->queues = IWLAGN_FIRST_AMPDU_QUEUE; | 
|  |  | 
|  | hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; | 
|  |  | 
|  | if (priv->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels) | 
|  | priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = | 
|  | &priv->nvm_data->bands[IEEE80211_BAND_2GHZ]; | 
|  | if (priv->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels) | 
|  | priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = | 
|  | &priv->nvm_data->bands[IEEE80211_BAND_5GHZ]; | 
|  |  | 
|  | hw->wiphy->hw_version = priv->trans->hw_id; | 
|  |  | 
|  | iwl_leds_init(priv); | 
|  |  | 
|  | ret = ieee80211_register_hw(priv->hw); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); | 
|  | iwl_leds_exit(priv); | 
|  | return ret; | 
|  | } | 
|  | priv->mac80211_registered = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void iwlagn_mac_unregister(struct iwl_priv *priv) | 
|  | { | 
|  | if (!priv->mac80211_registered) | 
|  | return; | 
|  | iwl_leds_exit(priv); | 
|  | ieee80211_unregister_hw(priv->hw); | 
|  | priv->mac80211_registered = 0; | 
|  | } | 
|  |  | 
|  | static int __iwl_up(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rxon_context *ctx; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { | 
|  | IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | for_each_context(priv, ctx) { | 
|  | ret = iwlagn_alloc_bcast_station(priv, ctx); | 
|  | if (ret) { | 
|  | iwl_dealloc_bcast_stations(priv); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = iwl_run_init_ucode(priv); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | ret = iwl_alive_start(priv); | 
|  | if (ret) | 
|  | goto error; | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | set_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  | iwl_down(priv); | 
|  | clear_bit(STATUS_EXIT_PENDING, &priv->status); | 
|  |  | 
|  | IWL_ERR(priv, "Unable to initialize device.\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_start(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | int ret; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | /* we should be verifying the device is ready to be opened */ | 
|  | mutex_lock(&priv->mutex); | 
|  | ret = __iwl_up(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "Start UP work done.\n"); | 
|  |  | 
|  | /* Now we should be done, and the READY bit should be set. */ | 
|  | if (WARN_ON(!test_bit(STATUS_READY, &priv->status))) | 
|  | ret = -EIO; | 
|  |  | 
|  | iwlagn_led_enable(priv); | 
|  |  | 
|  | priv->is_open = 1; | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_stop(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | if (!priv->is_open) | 
|  | return; | 
|  |  | 
|  | priv->is_open = 0; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | iwl_down(priv); | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | iwl_cancel_deferred_work(priv); | 
|  |  | 
|  | flush_workqueue(priv->workqueue); | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct cfg80211_gtk_rekey_data *data) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | if (iwlwifi_mod_params.sw_crypto) | 
|  | return; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (priv->contexts[IWL_RXON_CTX_BSS].vif != vif) | 
|  | goto out; | 
|  |  | 
|  | memcpy(priv->kek, data->kek, NL80211_KEK_LEN); | 
|  | memcpy(priv->kck, data->kck, NL80211_KCK_LEN); | 
|  | priv->replay_ctr = | 
|  | cpu_to_le64(be64_to_cpup((__be64 *)&data->replay_ctr)); | 
|  | priv->have_rekey_data = true; | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  |  | 
|  | static int iwlagn_mac_suspend(struct ieee80211_hw *hw, | 
|  | struct cfg80211_wowlan *wowlan) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | int ret; | 
|  |  | 
|  | if (WARN_ON(!wowlan)) | 
|  | return -EINVAL; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | /* Don't attempt WoWLAN when not associated, tear down instead. */ | 
|  | if (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION || | 
|  | !iwl_is_associated_ctx(ctx)) { | 
|  | ret = 1; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = iwlagn_suspend(priv, wowlan); | 
|  | if (ret) | 
|  | goto error; | 
|  |  | 
|  | /* let the ucode operate on its own */ | 
|  | iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_SET, | 
|  | CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); | 
|  |  | 
|  | iwl_trans_d3_suspend(priv->trans, false); | 
|  |  | 
|  | goto out; | 
|  |  | 
|  | error: | 
|  | priv->wowlan = false; | 
|  | iwlagn_prepare_restart(priv); | 
|  | ieee80211_restart_hw(priv->hw); | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | struct iwl_resume_data { | 
|  | struct iwl_priv *priv; | 
|  | struct iwlagn_wowlan_status *cmd; | 
|  | bool valid; | 
|  | }; | 
|  |  | 
|  | static bool iwl_resume_status_fn(struct iwl_notif_wait_data *notif_wait, | 
|  | struct iwl_rx_packet *pkt, void *data) | 
|  | { | 
|  | struct iwl_resume_data *resume_data = data; | 
|  | struct iwl_priv *priv = resume_data->priv; | 
|  |  | 
|  | if (iwl_rx_packet_payload_len(pkt) != sizeof(*resume_data->cmd)) { | 
|  | IWL_ERR(priv, "rx wrong size data\n"); | 
|  | return true; | 
|  | } | 
|  | memcpy(resume_data->cmd, pkt->data, sizeof(*resume_data->cmd)); | 
|  | resume_data->valid = true; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_resume(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | struct ieee80211_vif *vif; | 
|  | u32 base; | 
|  | int ret; | 
|  | enum iwl_d3_status d3_status; | 
|  | struct error_table_start { | 
|  | /* cf. struct iwl_error_event_table */ | 
|  | u32 valid; | 
|  | u32 error_id; | 
|  | } err_info; | 
|  | struct iwl_notification_wait status_wait; | 
|  | static const u8 status_cmd[] = { | 
|  | REPLY_WOWLAN_GET_STATUS, | 
|  | }; | 
|  | struct iwlagn_wowlan_status status_data = {}; | 
|  | struct iwl_resume_data resume_data = { | 
|  | .priv = priv, | 
|  | .cmd = &status_data, | 
|  | .valid = false, | 
|  | }; | 
|  | struct cfg80211_wowlan_wakeup wakeup = { | 
|  | .pattern_idx = -1, | 
|  | }; | 
|  | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
|  | const struct fw_img *img; | 
|  | #endif | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | /* we'll clear ctx->vif during iwlagn_prepare_restart() */ | 
|  | vif = ctx->vif; | 
|  |  | 
|  | ret = iwl_trans_d3_resume(priv->trans, &d3_status, false); | 
|  | if (ret) | 
|  | goto out_unlock; | 
|  |  | 
|  | if (d3_status != IWL_D3_STATUS_ALIVE) { | 
|  | IWL_INFO(priv, "Device was reset during suspend\n"); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | /* uCode is no longer operating by itself */ | 
|  | iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR, | 
|  | CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); | 
|  |  | 
|  | base = priv->device_pointers.error_event_table; | 
|  | if (!iwlagn_hw_valid_rtc_data_addr(base)) { | 
|  | IWL_WARN(priv, "Invalid error table during resume!\n"); | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | iwl_trans_read_mem_bytes(priv->trans, base, | 
|  | &err_info, sizeof(err_info)); | 
|  |  | 
|  | if (err_info.valid) { | 
|  | IWL_INFO(priv, "error table is valid (%d, 0x%x)\n", | 
|  | err_info.valid, err_info.error_id); | 
|  | if (err_info.error_id == RF_KILL_INDICATOR_FOR_WOWLAN) { | 
|  | wakeup.rfkill_release = true; | 
|  | ieee80211_report_wowlan_wakeup(vif, &wakeup, | 
|  | GFP_KERNEL); | 
|  | } | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
|  | img = &priv->fw->img[IWL_UCODE_WOWLAN]; | 
|  | if (!priv->wowlan_sram) | 
|  | priv->wowlan_sram = | 
|  | kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len, | 
|  | GFP_KERNEL); | 
|  |  | 
|  | if (priv->wowlan_sram) | 
|  | iwl_trans_read_mem(priv->trans, 0x800000, | 
|  | priv->wowlan_sram, | 
|  | img->sec[IWL_UCODE_SECTION_DATA].len / 4); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * This is very strange. The GET_STATUS command is sent but the device | 
|  | * doesn't reply properly, it seems it doesn't close the RBD so one is | 
|  | * always left open ... As a result, we need to send another command | 
|  | * and have to reset the driver afterwards. As we need to switch to | 
|  | * runtime firmware again that'll happen. | 
|  | */ | 
|  |  | 
|  | iwl_init_notification_wait(&priv->notif_wait, &status_wait, status_cmd, | 
|  | ARRAY_SIZE(status_cmd), iwl_resume_status_fn, | 
|  | &resume_data); | 
|  |  | 
|  | iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_GET_STATUS, CMD_ASYNC, 0, NULL); | 
|  | iwl_dvm_send_cmd_pdu(priv, REPLY_ECHO, CMD_ASYNC, 0, NULL); | 
|  | /* an RBD is left open in the firmware now! */ | 
|  |  | 
|  | ret = iwl_wait_notification(&priv->notif_wait, &status_wait, HZ/5); | 
|  | if (ret) | 
|  | goto out_unlock; | 
|  |  | 
|  | if (resume_data.valid && priv->contexts[IWL_RXON_CTX_BSS].vif) { | 
|  | u32 reasons = le32_to_cpu(status_data.wakeup_reason); | 
|  | struct cfg80211_wowlan_wakeup *wakeup_report; | 
|  |  | 
|  | IWL_INFO(priv, "WoWLAN wakeup reason(s): 0x%.8x\n", reasons); | 
|  |  | 
|  | if (reasons) { | 
|  | if (reasons & IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET) | 
|  | wakeup.magic_pkt = true; | 
|  | if (reasons & IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH) | 
|  | wakeup.pattern_idx = status_data.pattern_number; | 
|  | if (reasons & (IWLAGN_WOWLAN_WAKEUP_BEACON_MISS | | 
|  | IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE)) | 
|  | wakeup.disconnect = true; | 
|  | if (reasons & IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL) | 
|  | wakeup.gtk_rekey_failure = true; | 
|  | if (reasons & IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ) | 
|  | wakeup.eap_identity_req = true; | 
|  | if (reasons & IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE) | 
|  | wakeup.four_way_handshake = true; | 
|  | wakeup_report = &wakeup; | 
|  | } else { | 
|  | wakeup_report = NULL; | 
|  | } | 
|  |  | 
|  | ieee80211_report_wowlan_wakeup(vif, wakeup_report, GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | priv->wowlan = false; | 
|  |  | 
|  | iwlagn_prepare_restart(priv); | 
|  |  | 
|  | memset((void *)&ctx->active, 0, sizeof(ctx->active)); | 
|  | iwl_connection_init_rx_config(priv, ctx); | 
|  | iwlagn_set_rxon_chain(priv, ctx); | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  |  | 
|  | ieee80211_resume_disconnect(vif); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_set_wakeup(struct ieee80211_hw *hw, bool enabled) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | device_set_wakeup_enable(priv->trans->dev, enabled); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void iwlagn_mac_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_tx_control *control, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | if (iwlagn_tx_skb(priv, control->sta, skb)) | 
|  | ieee80211_free_txskb(hw, skb); | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_key_conf *keyconf, | 
|  | struct ieee80211_sta *sta, | 
|  | u32 iv32, u16 *phase1key) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | iwl_update_tkip_key(priv, vif, keyconf, sta, iv32, phase1key); | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | 
|  | struct iwl_rxon_context *ctx = vif_priv->ctx; | 
|  | int ret; | 
|  | bool is_default_wep_key = false; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | if (iwlwifi_mod_params.sw_crypto) { | 
|  | IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | switch (key->cipher) { | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; | 
|  | /* fall through */ | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We could program these keys into the hardware as well, but we | 
|  | * don't expect much multicast traffic in IBSS and having keys | 
|  | * for more stations is probably more useful. | 
|  | * | 
|  | * Mark key TX-only and return 0. | 
|  | */ | 
|  | if (vif->type == NL80211_IFTYPE_ADHOC && | 
|  | !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { | 
|  | key->hw_key_idx = WEP_INVALID_OFFSET; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* If they key was TX-only, accept deletion */ | 
|  | if (cmd == DISABLE_KEY && key->hw_key_idx == WEP_INVALID_OFFSET) | 
|  | return 0; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | iwl_scan_cancel_timeout(priv, 100); | 
|  |  | 
|  | BUILD_BUG_ON(WEP_INVALID_OFFSET == IWLAGN_HW_KEY_DEFAULT); | 
|  |  | 
|  | /* | 
|  | * If we are getting WEP group key and we didn't receive any key mapping | 
|  | * so far, we are in legacy wep mode (group key only), otherwise we are | 
|  | * in 1X mode. | 
|  | * In legacy wep mode, we use another host command to the uCode. | 
|  | */ | 
|  | if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || | 
|  | key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { | 
|  | if (cmd == SET_KEY) | 
|  | is_default_wep_key = !ctx->key_mapping_keys; | 
|  | else | 
|  | is_default_wep_key = | 
|  | key->hw_key_idx == IWLAGN_HW_KEY_DEFAULT; | 
|  | } | 
|  |  | 
|  |  | 
|  | switch (cmd) { | 
|  | case SET_KEY: | 
|  | if (is_default_wep_key) { | 
|  | ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key); | 
|  | break; | 
|  | } | 
|  | ret = iwl_set_dynamic_key(priv, vif_priv->ctx, key, sta); | 
|  | if (ret) { | 
|  | /* | 
|  | * can't add key for RX, but we don't need it | 
|  | * in the device for TX so still return 0 | 
|  | */ | 
|  | ret = 0; | 
|  | key->hw_key_idx = WEP_INVALID_OFFSET; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); | 
|  | break; | 
|  | case DISABLE_KEY: | 
|  | if (is_default_wep_key) | 
|  | ret = iwl_remove_default_wep_key(priv, ctx, key); | 
|  | else | 
|  | ret = iwl_remove_dynamic_key(priv, ctx, key, sta); | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum ieee80211_ampdu_mlme_action action, | 
|  | struct ieee80211_sta *sta, u16 tid, u16 *ssn, | 
|  | u8 buf_size) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | int ret = -EINVAL; | 
|  | struct iwl_station_priv *sta_priv = (void *) sta->drv_priv; | 
|  |  | 
|  | IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", | 
|  | sta->addr, tid); | 
|  |  | 
|  | if (!(priv->nvm_data->sku_cap_11n_enable)) | 
|  | return -EACCES; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | switch (action) { | 
|  | case IEEE80211_AMPDU_RX_START: | 
|  | if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) | 
|  | break; | 
|  | IWL_DEBUG_HT(priv, "start Rx\n"); | 
|  | ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn); | 
|  | break; | 
|  | case IEEE80211_AMPDU_RX_STOP: | 
|  | IWL_DEBUG_HT(priv, "stop Rx\n"); | 
|  | ret = iwl_sta_rx_agg_stop(priv, sta, tid); | 
|  | break; | 
|  | case IEEE80211_AMPDU_TX_START: | 
|  | if (!priv->trans->ops->txq_enable) | 
|  | break; | 
|  | if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG) | 
|  | break; | 
|  | IWL_DEBUG_HT(priv, "start Tx\n"); | 
|  | ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn); | 
|  | break; | 
|  | case IEEE80211_AMPDU_TX_STOP_FLUSH: | 
|  | case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: | 
|  | IWL_DEBUG_HT(priv, "Flush Tx\n"); | 
|  | ret = iwlagn_tx_agg_flush(priv, vif, sta, tid); | 
|  | break; | 
|  | case IEEE80211_AMPDU_TX_STOP_CONT: | 
|  | IWL_DEBUG_HT(priv, "stop Tx\n"); | 
|  | ret = iwlagn_tx_agg_stop(priv, vif, sta, tid); | 
|  | if ((ret == 0) && (priv->agg_tids_count > 0)) { | 
|  | priv->agg_tids_count--; | 
|  | IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n", | 
|  | priv->agg_tids_count); | 
|  | } | 
|  | if (!priv->agg_tids_count && | 
|  | priv->hw_params.use_rts_for_aggregation) { | 
|  | /* | 
|  | * switch off RTS/CTS if it was previously enabled | 
|  | */ | 
|  | sta_priv->lq_sta.lq.general_params.flags &= | 
|  | ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; | 
|  | iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif), | 
|  | &sta_priv->lq_sta.lq, CMD_ASYNC, false); | 
|  | } | 
|  | break; | 
|  | case IEEE80211_AMPDU_TX_OPERATIONAL: | 
|  | ret = iwlagn_tx_agg_oper(priv, vif, sta, tid, buf_size); | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_sta_add(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | 
|  | bool is_ap = vif->type == NL80211_IFTYPE_STATION; | 
|  | int ret; | 
|  | u8 sta_id; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", | 
|  | sta->addr); | 
|  | sta_priv->sta_id = IWL_INVALID_STATION; | 
|  |  | 
|  | atomic_set(&sta_priv->pending_frames, 0); | 
|  | if (vif->type == NL80211_IFTYPE_AP) | 
|  | sta_priv->client = true; | 
|  |  | 
|  | ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr, | 
|  | is_ap, sta, &sta_id); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Unable to add station %pM (%d)\n", | 
|  | sta->addr, ret); | 
|  | /* Should we return success if return code is EEXIST ? */ | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | sta_priv->sta_id = sta_id; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_sta_remove(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | int ret; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n", sta->addr); | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_STATION) { | 
|  | /* | 
|  | * Station will be removed from device when the RXON | 
|  | * is set to unassociated -- just deactivate it here | 
|  | * to avoid re-programming it. | 
|  | */ | 
|  | ret = 0; | 
|  | iwl_deactivate_station(priv, sta_priv->sta_id, sta->addr); | 
|  | } else { | 
|  | ret = iwl_remove_station(priv, sta_priv->sta_id, sta->addr); | 
|  | if (ret) | 
|  | IWL_DEBUG_QUIET_RFKILL(priv, | 
|  | "Error removing station %pM\n", sta->addr); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_sta_state(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | enum ieee80211_sta_state old_state, | 
|  | enum ieee80211_sta_state new_state) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | 
|  | enum { | 
|  | NONE, ADD, REMOVE, HT_RATE_INIT, ADD_RATE_INIT, | 
|  | } op = NONE; | 
|  | int ret; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "station %pM state change %d->%d\n", | 
|  | sta->addr, old_state, new_state); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | if (vif->type == NL80211_IFTYPE_STATION) { | 
|  | if (old_state == IEEE80211_STA_NOTEXIST && | 
|  | new_state == IEEE80211_STA_NONE) | 
|  | op = ADD; | 
|  | else if (old_state == IEEE80211_STA_NONE && | 
|  | new_state == IEEE80211_STA_NOTEXIST) | 
|  | op = REMOVE; | 
|  | else if (old_state == IEEE80211_STA_AUTH && | 
|  | new_state == IEEE80211_STA_ASSOC) | 
|  | op = HT_RATE_INIT; | 
|  | } else { | 
|  | if (old_state == IEEE80211_STA_AUTH && | 
|  | new_state == IEEE80211_STA_ASSOC) | 
|  | op = ADD_RATE_INIT; | 
|  | else if (old_state == IEEE80211_STA_ASSOC && | 
|  | new_state == IEEE80211_STA_AUTH) | 
|  | op = REMOVE; | 
|  | } | 
|  |  | 
|  | switch (op) { | 
|  | case ADD: | 
|  | ret = iwlagn_mac_sta_add(hw, vif, sta); | 
|  | if (ret) | 
|  | break; | 
|  | /* | 
|  | * Clear the in-progress flag, the AP station entry was added | 
|  | * but we'll initialize LQ only when we've associated (which | 
|  | * would also clear the in-progress flag). This is necessary | 
|  | * in case we never initialize LQ because association fails. | 
|  | */ | 
|  | spin_lock_bh(&priv->sta_lock); | 
|  | priv->stations[iwl_sta_id(sta)].used &= | 
|  | ~IWL_STA_UCODE_INPROGRESS; | 
|  | spin_unlock_bh(&priv->sta_lock); | 
|  | break; | 
|  | case REMOVE: | 
|  | ret = iwlagn_mac_sta_remove(hw, vif, sta); | 
|  | break; | 
|  | case ADD_RATE_INIT: | 
|  | ret = iwlagn_mac_sta_add(hw, vif, sta); | 
|  | if (ret) | 
|  | break; | 
|  | /* Initialize rate scaling */ | 
|  | IWL_DEBUG_INFO(priv, | 
|  | "Initializing rate scaling for station %pM\n", | 
|  | sta->addr); | 
|  | iwl_rs_rate_init(priv, sta, iwl_sta_id(sta)); | 
|  | ret = 0; | 
|  | break; | 
|  | case HT_RATE_INIT: | 
|  | /* Initialize rate scaling */ | 
|  | ret = iwl_sta_update_ht(priv, vif_priv->ctx, sta); | 
|  | if (ret) | 
|  | break; | 
|  | IWL_DEBUG_INFO(priv, | 
|  | "Initializing rate scaling for station %pM\n", | 
|  | sta->addr); | 
|  | iwl_rs_rate_init(priv, sta, iwl_sta_id(sta)); | 
|  | ret = 0; | 
|  | break; | 
|  | default: | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mac80211 might WARN if we fail, but due the way we | 
|  | * (badly) handle hard rfkill, we might fail here | 
|  | */ | 
|  | if (iwl_is_rfkill(priv)) | 
|  | ret = 0; | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, | 
|  | struct ieee80211_channel_switch *ch_switch) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct ieee80211_conf *conf = &hw->conf; | 
|  | struct ieee80211_channel *channel = ch_switch->chandef.chan; | 
|  | struct iwl_ht_config *ht_conf = &priv->current_ht_config; | 
|  | /* | 
|  | * MULTI-FIXME | 
|  | * When we add support for multiple interfaces, we need to | 
|  | * revisit this. The channel switch command in the device | 
|  | * only affects the BSS context, but what does that really | 
|  | * mean? And what if we get a CSA on the second interface? | 
|  | * This needs a lot of work. | 
|  | */ | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | u16 ch; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (iwl_is_rfkill(priv)) | 
|  | goto out; | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status) || | 
|  | test_bit(STATUS_SCANNING, &priv->status) || | 
|  | test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) | 
|  | goto out; | 
|  |  | 
|  | if (!iwl_is_associated_ctx(ctx)) | 
|  | goto out; | 
|  |  | 
|  | if (!priv->lib->set_channel_switch) | 
|  | goto out; | 
|  |  | 
|  | ch = channel->hw_value; | 
|  | if (le16_to_cpu(ctx->active.channel) == ch) | 
|  | goto out; | 
|  |  | 
|  | priv->current_ht_config.smps = conf->smps_mode; | 
|  |  | 
|  | /* Configure HT40 channels */ | 
|  | switch (cfg80211_get_chandef_type(&ch_switch->chandef)) { | 
|  | case NL80211_CHAN_NO_HT: | 
|  | case NL80211_CHAN_HT20: | 
|  | ctx->ht.is_40mhz = false; | 
|  | ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; | 
|  | break; | 
|  | case NL80211_CHAN_HT40MINUS: | 
|  | ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; | 
|  | ctx->ht.is_40mhz = true; | 
|  | break; | 
|  | case NL80211_CHAN_HT40PLUS: | 
|  | ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; | 
|  | ctx->ht.is_40mhz = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if ((le16_to_cpu(ctx->staging.channel) != ch)) | 
|  | ctx->staging.flags = 0; | 
|  |  | 
|  | iwl_set_rxon_channel(priv, channel, ctx); | 
|  | iwl_set_rxon_ht(priv, ht_conf); | 
|  | iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif); | 
|  |  | 
|  | /* | 
|  | * at this point, staging_rxon has the | 
|  | * configuration for channel switch | 
|  | */ | 
|  | set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); | 
|  | priv->switch_channel = cpu_to_le16(ch); | 
|  | if (priv->lib->set_channel_switch(priv, ch_switch)) { | 
|  | clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); | 
|  | priv->switch_channel = 0; | 
|  | ieee80211_chswitch_done(ctx->vif, false); | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) | 
|  | { | 
|  | /* | 
|  | * MULTI-FIXME | 
|  | * See iwlagn_mac_channel_switch. | 
|  | */ | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | if (!test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | if (ctx->vif) | 
|  | ieee80211_chswitch_done(ctx->vif, is_success); | 
|  | } | 
|  |  | 
|  | static void iwlagn_configure_filter(struct ieee80211_hw *hw, | 
|  | unsigned int changed_flags, | 
|  | unsigned int *total_flags, | 
|  | u64 multicast) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | __le32 filter_or = 0, filter_nand = 0; | 
|  | struct iwl_rxon_context *ctx; | 
|  |  | 
|  | #define CHK(test, flag)	do { \ | 
|  | if (*total_flags & (test))		\ | 
|  | filter_or |= (flag);		\ | 
|  | else					\ | 
|  | filter_nand |= (flag);		\ | 
|  | } while (0) | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", | 
|  | changed_flags, *total_flags); | 
|  |  | 
|  | CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); | 
|  | /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ | 
|  | CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); | 
|  | CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); | 
|  |  | 
|  | #undef CHK | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | for_each_context(priv, ctx) { | 
|  | ctx->staging.filter_flags &= ~filter_nand; | 
|  | ctx->staging.filter_flags |= filter_or; | 
|  |  | 
|  | /* | 
|  | * Not committing directly because hardware can perform a scan, | 
|  | * but we'll eventually commit the filter flags change anyway. | 
|  | */ | 
|  | } | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | /* | 
|  | * Receiving all multicast frames is always enabled by the | 
|  | * default flags setup in iwl_connection_init_rx_config() | 
|  | * since we currently do not support programming multicast | 
|  | * filters into the device. | 
|  | */ | 
|  | *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | | 
|  | FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_flush(struct ieee80211_hw *hw, u32 queues, bool drop) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { | 
|  | IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n"); | 
|  | goto done; | 
|  | } | 
|  | if (iwl_is_rfkill(priv)) { | 
|  | IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mac80211 will not push any more frames for transmit | 
|  | * until the flush is completed | 
|  | */ | 
|  | if (drop) { | 
|  | IWL_DEBUG_MAC80211(priv, "send flush command\n"); | 
|  | if (iwlagn_txfifo_flush(priv, 0)) { | 
|  | IWL_ERR(priv, "flush request fail\n"); | 
|  | goto done; | 
|  | } | 
|  | } | 
|  | IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n"); | 
|  | iwl_trans_wait_tx_queue_empty(priv->trans); | 
|  | done: | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum ieee80211_rssi_event rssi_event) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (priv->lib->bt_params && | 
|  | priv->lib->bt_params->advanced_bt_coexist) { | 
|  | if (rssi_event == RSSI_EVENT_LOW) | 
|  | priv->bt_enable_pspoll = true; | 
|  | else if (rssi_event == RSSI_EVENT_HIGH) | 
|  | priv->bt_enable_pspoll = false; | 
|  |  | 
|  | iwlagn_send_advance_bt_config(priv); | 
|  | } else { | 
|  | IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled," | 
|  | "ignoring RSSI callback\n"); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_set_tim(struct ieee80211_hw *hw, | 
|  | struct ieee80211_sta *sta, bool set) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | queue_work(priv->workqueue, &priv->beacon_update); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_conf_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, u16 queue, | 
|  | const struct ieee80211_tx_queue_params *params) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | 
|  | struct iwl_rxon_context *ctx = vif_priv->ctx; | 
|  | int q; | 
|  |  | 
|  | if (WARN_ON(!ctx)) | 
|  | return -EINVAL; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) { | 
|  | IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (queue >= AC_NUM) { | 
|  | IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | q = AC_NUM - 1 - queue; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | ctx->qos_data.def_qos_parm.ac[q].cw_min = | 
|  | cpu_to_le16(params->cw_min); | 
|  | ctx->qos_data.def_qos_parm.ac[q].cw_max = | 
|  | cpu_to_le16(params->cw_max); | 
|  | ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; | 
|  | ctx->qos_data.def_qos_parm.ac[q].edca_txop = | 
|  | cpu_to_le16((params->txop * 32)); | 
|  |  | 
|  | ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0; | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  |  | 
|  | return priv->ibss_manager == IWL_IBSS_MANAGER; | 
|  | } | 
|  |  | 
|  | static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx) | 
|  | { | 
|  | iwl_connection_init_rx_config(priv, ctx); | 
|  |  | 
|  | iwlagn_set_rxon_chain(priv, ctx); | 
|  |  | 
|  | return iwlagn_commit_rxon(priv, ctx); | 
|  | } | 
|  |  | 
|  | static int iwl_setup_interface(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | struct ieee80211_vif *vif = ctx->vif; | 
|  | int err, ac; | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | /* | 
|  | * This variable will be correct only when there's just | 
|  | * a single context, but all code using it is for hardware | 
|  | * that supports only one context. | 
|  | */ | 
|  | priv->iw_mode = vif->type; | 
|  |  | 
|  | ctx->is_active = true; | 
|  |  | 
|  | err = iwl_set_mode(priv, ctx); | 
|  | if (err) { | 
|  | if (!ctx->always_active) | 
|  | ctx->is_active = false; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (priv->lib->bt_params && priv->lib->bt_params->advanced_bt_coexist && | 
|  | vif->type == NL80211_IFTYPE_ADHOC) { | 
|  | /* | 
|  | * pretend to have high BT traffic as long as we | 
|  | * are operating in IBSS mode, as this will cause | 
|  | * the rate scaling etc. to behave as intended. | 
|  | */ | 
|  | priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH; | 
|  | } | 
|  |  | 
|  | /* set up queue mappings */ | 
|  | for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) | 
|  | vif->hw_queue[ac] = ctx->ac_to_queue[ac]; | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_AP) | 
|  | vif->cab_queue = ctx->mcast_queue; | 
|  | else | 
|  | vif->cab_queue = IEEE80211_INVAL_HW_QUEUE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; | 
|  | struct iwl_rxon_context *tmp, *ctx = NULL; | 
|  | int err; | 
|  | enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif); | 
|  | bool reset = false; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n", | 
|  | viftype, vif->addr); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) { | 
|  | IWL_WARN(priv, "Try to add interface when device not ready\n"); | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for_each_context(priv, tmp) { | 
|  | u32 possible_modes = | 
|  | tmp->interface_modes | tmp->exclusive_interface_modes; | 
|  |  | 
|  | if (tmp->vif) { | 
|  | /* On reset we need to add the same interface again */ | 
|  | if (tmp->vif == vif) { | 
|  | reset = true; | 
|  | ctx = tmp; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* check if this busy context is exclusive */ | 
|  | if (tmp->exclusive_interface_modes & | 
|  | BIT(tmp->vif->type)) { | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!(possible_modes & BIT(viftype))) | 
|  | continue; | 
|  |  | 
|  | /* have maybe usable context w/o interface */ | 
|  | ctx = tmp; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!ctx) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | vif_priv->ctx = ctx; | 
|  | ctx->vif = vif; | 
|  |  | 
|  | /* | 
|  | * In SNIFFER device type, the firmware reports the FCS to | 
|  | * the host, rather than snipping it off. Unfortunately, | 
|  | * mac80211 doesn't (yet) provide a per-packet flag for | 
|  | * this, so that we have to set the hardware flag based | 
|  | * on the interfaces added. As the monitor interface can | 
|  | * only be present by itself, and will be removed before | 
|  | * other interfaces are added, this is safe. | 
|  | */ | 
|  | if (vif->type == NL80211_IFTYPE_MONITOR) | 
|  | priv->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS; | 
|  | else | 
|  | priv->hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; | 
|  |  | 
|  | err = iwl_setup_interface(priv, ctx); | 
|  | if (!err || reset) | 
|  | goto out; | 
|  |  | 
|  | ctx->vif = NULL; | 
|  | priv->iw_mode = NL80211_IFTYPE_STATION; | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void iwl_teardown_interface(struct iwl_priv *priv, | 
|  | struct ieee80211_vif *vif, | 
|  | bool mode_change) | 
|  | { | 
|  | struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | if (priv->scan_vif == vif) { | 
|  | iwl_scan_cancel_timeout(priv, 200); | 
|  | iwl_force_scan_end(priv); | 
|  | } | 
|  |  | 
|  | if (!mode_change) { | 
|  | iwl_set_mode(priv, ctx); | 
|  | if (!ctx->always_active) | 
|  | ctx->is_active = false; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * When removing the IBSS interface, overwrite the | 
|  | * BT traffic load with the stored one from the last | 
|  | * notification, if any. If this is a device that | 
|  | * doesn't implement this, this has no effect since | 
|  | * both values are the same and zero. | 
|  | */ | 
|  | if (vif->type == NL80211_IFTYPE_ADHOC) | 
|  | priv->bt_traffic_load = priv->last_bt_traffic_load; | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (WARN_ON(ctx->vif != vif)) { | 
|  | struct iwl_rxon_context *tmp; | 
|  | IWL_ERR(priv, "ctx->vif = %p, vif = %p\n", ctx->vif, vif); | 
|  | for_each_context(priv, tmp) | 
|  | IWL_ERR(priv, "\tID = %d:\tctx = %p\tctx->vif = %p\n", | 
|  | tmp->ctxid, tmp, tmp->vif); | 
|  | } | 
|  | ctx->vif = NULL; | 
|  |  | 
|  | iwl_teardown_interface(priv, vif, false); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  |  | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_change_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum nl80211_iftype newtype, bool newp2p) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_rxon_context *ctx, *tmp; | 
|  | enum nl80211_iftype newviftype = newtype; | 
|  | u32 interface_modes; | 
|  | int err; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | newtype = ieee80211_iftype_p2p(newtype, newp2p); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | ctx = iwl_rxon_ctx_from_vif(vif); | 
|  |  | 
|  | /* | 
|  | * To simplify this code, only support changes on the | 
|  | * BSS context. The PAN context is usually reassigned | 
|  | * by creating/removing P2P interfaces anyway. | 
|  | */ | 
|  | if (ctx->ctxid != IWL_RXON_CTX_BSS) { | 
|  | err = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!ctx->vif || !iwl_is_ready_rf(priv)) { | 
|  | /* | 
|  | * Huh? But wait ... this can maybe happen when | 
|  | * we're in the middle of a firmware restart! | 
|  | */ | 
|  | err = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Check if the switch is supported in the same context */ | 
|  | interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; | 
|  | if (!(interface_modes & BIT(newtype))) { | 
|  | err = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ctx->exclusive_interface_modes & BIT(newtype)) { | 
|  | for_each_context(priv, tmp) { | 
|  | if (ctx == tmp) | 
|  | continue; | 
|  |  | 
|  | if (!tmp->is_active) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * The current mode switch would be exclusive, but | 
|  | * another context is active ... refuse the switch. | 
|  | */ | 
|  | err = -EBUSY; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* success */ | 
|  | iwl_teardown_interface(priv, vif, true); | 
|  | vif->type = newviftype; | 
|  | vif->p2p = newp2p; | 
|  | err = iwl_setup_interface(priv, ctx); | 
|  | WARN_ON(err); | 
|  | /* | 
|  | * We've switched internally, but submitting to the | 
|  | * device may have failed for some reason. Mask this | 
|  | * error, because otherwise mac80211 will not switch | 
|  | * (and set the interface type back) and we'll be | 
|  | * out of sync with it. | 
|  | */ | 
|  | err = 0; | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int iwlagn_mac_hw_scan(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct cfg80211_scan_request *req) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | int ret; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | if (req->n_channels == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | /* | 
|  | * If an internal scan is in progress, just set | 
|  | * up the scan_request as per above. | 
|  | */ | 
|  | if (priv->scan_type != IWL_SCAN_NORMAL) { | 
|  | IWL_DEBUG_SCAN(priv, | 
|  | "SCAN request during internal scan - defer\n"); | 
|  | priv->scan_request = req; | 
|  | priv->scan_vif = vif; | 
|  | ret = 0; | 
|  | } else { | 
|  | priv->scan_request = req; | 
|  | priv->scan_vif = vif; | 
|  | /* | 
|  | * mac80211 will only ask for one band at a time | 
|  | * so using channels[0] here is ok | 
|  | */ | 
|  | ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL, | 
|  | req->channels[0]->band); | 
|  | if (ret) { | 
|  | priv->scan_request = NULL; | 
|  | priv->scan_vif = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) | 
|  | { | 
|  | struct iwl_addsta_cmd cmd = { | 
|  | .mode = STA_CONTROL_MODIFY_MSK, | 
|  | .station_flags_msk = STA_FLG_PWR_SAVE_MSK, | 
|  | .sta.sta_id = sta_id, | 
|  | }; | 
|  |  | 
|  | iwl_send_add_sta(priv, &cmd, CMD_ASYNC); | 
|  | } | 
|  |  | 
|  | static void iwlagn_mac_sta_notify(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum sta_notify_cmd cmd, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; | 
|  | int sta_id; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter\n"); | 
|  |  | 
|  | switch (cmd) { | 
|  | case STA_NOTIFY_SLEEP: | 
|  | WARN_ON(!sta_priv->client); | 
|  | sta_priv->asleep = true; | 
|  | if (atomic_read(&sta_priv->pending_frames) > 0) | 
|  | ieee80211_sta_block_awake(hw, sta, true); | 
|  | break; | 
|  | case STA_NOTIFY_AWAKE: | 
|  | WARN_ON(!sta_priv->client); | 
|  | if (!sta_priv->asleep) | 
|  | break; | 
|  | sta_priv->asleep = false; | 
|  | sta_id = iwl_sta_id(sta); | 
|  | if (sta_id != IWL_INVALID_STATION) | 
|  | iwl_sta_modify_ps_wake(priv, sta_id); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  | } | 
|  |  | 
|  | struct ieee80211_ops iwlagn_hw_ops = { | 
|  | .tx = iwlagn_mac_tx, | 
|  | .start = iwlagn_mac_start, | 
|  | .stop = iwlagn_mac_stop, | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | .suspend = iwlagn_mac_suspend, | 
|  | .resume = iwlagn_mac_resume, | 
|  | .set_wakeup = iwlagn_mac_set_wakeup, | 
|  | #endif | 
|  | .add_interface = iwlagn_mac_add_interface, | 
|  | .remove_interface = iwlagn_mac_remove_interface, | 
|  | .change_interface = iwlagn_mac_change_interface, | 
|  | .config = iwlagn_mac_config, | 
|  | .configure_filter = iwlagn_configure_filter, | 
|  | .set_key = iwlagn_mac_set_key, | 
|  | .update_tkip_key = iwlagn_mac_update_tkip_key, | 
|  | .set_rekey_data = iwlagn_mac_set_rekey_data, | 
|  | .conf_tx = iwlagn_mac_conf_tx, | 
|  | .bss_info_changed = iwlagn_bss_info_changed, | 
|  | .ampdu_action = iwlagn_mac_ampdu_action, | 
|  | .hw_scan = iwlagn_mac_hw_scan, | 
|  | .sta_notify = iwlagn_mac_sta_notify, | 
|  | .sta_state = iwlagn_mac_sta_state, | 
|  | .channel_switch = iwlagn_mac_channel_switch, | 
|  | .flush = iwlagn_mac_flush, | 
|  | .tx_last_beacon = iwlagn_mac_tx_last_beacon, | 
|  | .rssi_callback = iwlagn_mac_rssi_callback, | 
|  | .set_tim = iwlagn_mac_set_tim, | 
|  | }; | 
|  |  | 
|  | /* This function both allocates and initializes hw and priv. */ | 
|  | struct ieee80211_hw *iwl_alloc_all(void) | 
|  | { | 
|  | struct iwl_priv *priv; | 
|  | struct iwl_op_mode *op_mode; | 
|  | /* mac80211 allocates memory for this device instance, including | 
|  | *   space for this driver's private structure */ | 
|  | struct ieee80211_hw *hw; | 
|  |  | 
|  | hw = ieee80211_alloc_hw(sizeof(struct iwl_priv) + | 
|  | sizeof(struct iwl_op_mode), &iwlagn_hw_ops); | 
|  | if (!hw) | 
|  | goto out; | 
|  |  | 
|  | op_mode = hw->priv; | 
|  | priv = IWL_OP_MODE_GET_DVM(op_mode); | 
|  | priv->hw = hw; | 
|  |  | 
|  | out: | 
|  | return hw; | 
|  | } |