blob: e6285ae6f4239d5e12ada123c937c272964f4e67 [file] [log] [blame]
/*
* GE IMP3A Board Setup
*
* Author Martyn Welch <martyn.welch@ge.com>
*
* Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Based on: mpc85xx_ds.c (MPC85xx DS Board Setup)
* Copyright 2007 Freescale Semiconductor Inc.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include <asm/nvram.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "smp.h"
#include "mpc85xx.h"
#include <sysdev/ge/ge_pic.h>
void __iomem *imp3a_regs;
void __init ge_imp3a_pic_init(void)
{
struct mpic *mpic;
struct device_node *np;
struct device_node *cascade_node = NULL;
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
mpic = mpic_alloc(NULL, 0,
MPIC_NO_RESET |
MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
} else {
mpic = mpic_alloc(NULL, 0,
MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
}
BUG_ON(mpic == NULL);
mpic_init(mpic);
/*
* There is a simple interrupt handler in the main FPGA, this needs
* to be cascaded into the MPIC
*/
for_each_node_by_type(np, "interrupt-controller")
if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) {
cascade_node = np;
break;
}
if (cascade_node == NULL) {
printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
return;
}
gef_pic_init(cascade_node);
of_node_put(cascade_node);
}
static void ge_imp3a_pci_assign_primary(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
struct resource rsrc;
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
of_device_is_compatible(np, "fsl,p2020-pcie")) {
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x9000)
fsl_pci_primary = np;
}
}
#endif
}
/*
* Setup the architecture
*/
static void __init ge_imp3a_setup_arch(void)
{
struct device_node *regs;
if (ppc_md.progress)
ppc_md.progress("ge_imp3a_setup_arch()", 0);
mpc85xx_smp_init();
ge_imp3a_pci_assign_primary();
swiotlb_detect_4g();
/* Remap basic board registers */
regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
if (regs) {
imp3a_regs = of_iomap(regs, 0);
if (imp3a_regs == NULL)
printk(KERN_WARNING "Unable to map board registers\n");
of_node_put(regs);
}
#if defined(CONFIG_MMIO_NVRAM)
mmio_nvram_init();
#endif
printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
}
/* Return the PCB revision */
static unsigned int ge_imp3a_get_pcb_rev(void)
{
unsigned int reg;
reg = ioread16(imp3a_regs);
return (reg >> 8) & 0xff;
}
/* Return the board (software) revision */
static unsigned int ge_imp3a_get_board_rev(void)
{
unsigned int reg;
reg = ioread16(imp3a_regs + 0x2);
return reg & 0xff;
}
/* Return the FPGA revision */
static unsigned int ge_imp3a_get_fpga_rev(void)
{
unsigned int reg;
reg = ioread16(imp3a_regs + 0x2);
return (reg >> 8) & 0xff;
}
/* Return compactPCI Geographical Address */
static unsigned int ge_imp3a_get_cpci_geo_addr(void)
{
unsigned int reg;
reg = ioread16(imp3a_regs + 0x6);
return (reg & 0x0f00) >> 8;
}
/* Return compactPCI System Controller Status */
static unsigned int ge_imp3a_get_cpci_is_syscon(void)
{
unsigned int reg;
reg = ioread16(imp3a_regs + 0x6);
return reg & (1 << 12);
}
static void ge_imp3a_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(),
('A' + ge_imp3a_get_board_rev() - 1));
seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev());
seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr());
seq_printf(m, "cPCI syscon\t: %s\n",
ge_imp3a_get_cpci_is_syscon() ? "yes" : "no");
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init ge_imp3a_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "ge,IMP3A");
}
machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);
machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
define_machine(ge_imp3a) {
.name = "GE_IMP3A",
.probe = ge_imp3a_probe,
.setup_arch = ge_imp3a_setup_arch,
.init_IRQ = ge_imp3a_pic_init,
.show_cpuinfo = ge_imp3a_show_cpuinfo,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};