| Broadcom's PWM Controller Device Tree bindings |
| |
| Broadcom's Kona PWM Controller has 6 channels |
| |
| Required Properties : |
| - compatible: should be "brcm,kona-pwm" |
| - reg: physical base address and length of the controller's registers |
| - clocks: clock specifier for the kona pwm external clock |
| - #pwm-cells: should be 2. The first cell specifies the per-chip index |
| of the PWM to use and the second cell is the period in nanoseconds. |
| |
| Refer to pwm/pwm.txt for generic pwm controller node properties. |
| |
| Refer to clocks/clock-bindings.txt for generic clock consumer |
| properties |
| |
| Example: |
| |
| pwm: pwm@3e01a000 { |
| compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; |
| reg = <0x3e01a000 0xc4>; |
| clocks = <&pwm_clk>; |
| #pwm-cells = <2>; |
| }; |