| Platform DesignWare HS OTG USB 2.0 controller |
| ----------------------------------------------------- |
| |
| Required properties: |
| - compatible : "snps,dwc2" |
| - reg : Should contain 1 register range (address and length) |
| - interrupts : Should contain 1 interrupt |
| - clocks: clock provider specifier |
| - clock-names: shall be "otg" |
| - phys: phy provider specifier |
| - phy-names: shall be "device" |
| Refer to clk/clock-bindings.txt for generic clock consumer properties |
| Refer to phy/phy-bindings.txt for generic phy consumer properties |
| |
| Example: |
| |
| usb@101c0000 { |
| compatible = "ralink,rt3050-usb, snps,dwc2"; |
| reg = <0x101c0000 40000>; |
| interrupts = <18>; |
| clocks = <&usb_otg_ahb_clk>; |
| clock-names = "otg"; |
| phys = <&usbphy>; |
| phy-names = "device"; |
| }; |
