blob: 073c292baa53e12d0bc7c6aef2a8956a81ea4a6d [file] [log] [blame]
/*
* exynos_tmu_data.c - Samsung EXYNOS tmu data file
*
* Copyright (C) 2013 Samsung Electronics
* Amit Daniel Kachhap <amit.daniel@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include "exynos_thermal_common.h"
#include "exynos_tmu.h"
#include "exynos_tmu_data.h"
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
.threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
};
struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
.tmu_data = {
{
.threshold = 80,
.trigger_levels[0] = 5,
.trigger_levels[1] = 20,
.trigger_levels[2] = 30,
.trigger_enable[0] = true,
.trigger_enable[1] = true,
.trigger_enable[2] = true,
.trigger_enable[3] = false,
.trigger_type[0] = THROTTLE_ACTIVE,
.trigger_type[1] = THROTTLE_ACTIVE,
.trigger_type[2] = SW_TRIP,
.max_trigger_level = 4,
.gain = 15,
.reference_voltage = 7,
.cal_type = TYPE_ONE_POINT_TRIMMING,
.min_efuse_value = 40,
.max_efuse_value = 100,
.first_point_trim = 25,
.second_point_trim = 85,
.default_temp_offset = 50,
.freq_tab[0] = {
.freq_clip_max = 800 * 1000,
.temp_level = 85,
},
.freq_tab[1] = {
.freq_clip_max = 200 * 1000,
.temp_level = 100,
},
.freq_tab_count = 2,
.type = SOC_ARCH_EXYNOS4210,
.registers = &exynos4210_tmu_registers,
.features = TMU_SUPPORT_READY_STATUS,
},
},
.tmu_count = 1,
};
#endif
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.threshold_th1 = EXYNOS_THD_TEMP_FALL,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
.inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
.inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS4412_TMU_DATA \
.threshold_falling = 10, \
.trigger_levels[0] = 85, \
.trigger_levels[1] = 103, \
.trigger_levels[2] = 110, \
.trigger_levels[3] = 120, \
.trigger_enable[0] = true, \
.trigger_enable[1] = true, \
.trigger_enable[2] = true, \
.trigger_enable[3] = false, \
.trigger_type[0] = THROTTLE_ACTIVE, \
.trigger_type[1] = THROTTLE_ACTIVE, \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_ONE_POINT_TRIMMING, \
.efuse_value = 55, \
.min_efuse_value = 40, \
.max_efuse_value = 100, \
.first_point_trim = 25, \
.second_point_trim = 85, \
.default_temp_offset = 50, \
.freq_tab[0] = { \
.freq_clip_max = 800 * 1000, \
.temp_level = 85, \
}, \
.freq_tab[1] = { \
.freq_clip_max = 200 * 1000, \
.temp_level = 103, \
}, \
.freq_tab_count = 2, \
.registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
TMU_SUPPORT_EMUL_TIME)
#endif
#if defined(CONFIG_SOC_EXYNOS4412)
struct exynos_tmu_init_data const exynos4412_default_tmu_data = {
.tmu_data = {
{
EXYNOS4412_TMU_DATA,
.type = SOC_ARCH_EXYNOS4412,
.test_mux = EXYNOS4412_MUX_ADDR_VALUE,
},
},
.tmu_count = 1,
};
#endif
#if defined(CONFIG_SOC_EXYNOS5250)
struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
.tmu_data = {
{
EXYNOS4412_TMU_DATA,
.type = SOC_ARCH_EXYNOS5250,
},
},
.tmu_count = 1,
};
#endif
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
.calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
.threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
.inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
.inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
.inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
.inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.tmu_pmin = EXYNOS5440_TMU_PMIN,
};
#define EXYNOS5440_TMU_DATA \
.trigger_levels[0] = 100, \
.trigger_levels[4] = 105, \
.trigger_enable[0] = 1, \
.trigger_type[0] = SW_TRIP, \
.trigger_type[4] = HW_TRIP, \
.max_trigger_level = 5, \
.gain = 5, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_ONE_POINT_TRIMMING, \
.cal_mode = 0, \
.efuse_value = 0x5b2d, \
.min_efuse_value = 16, \
.max_efuse_value = 76, \
.first_point_trim = 25, \
.second_point_trim = 70, \
.default_temp_offset = 25, \
.type = SOC_ARCH_EXYNOS5440, \
.registers = &exynos5440_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
.tmu_data = {
{ EXYNOS5440_TMU_DATA } ,
{ EXYNOS5440_TMU_DATA } ,
{ EXYNOS5440_TMU_DATA } ,
},
.tmu_count = 3,
};
#endif